LG 65NANO79SNA (01) PDF Document

When installing the LG 65NANO79SNA, please adhere to the following safety instructions:

Do not block any ventilation openings and install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not install the product on a carpet or cushion.

Do not install the TV in a confined space such as a bookcase.

Do not install the product where it may be exposed to oil or oil mist, as this may damage the product and cause it to fall.

Refer to the text on the TV for proper ventilation clearance (usually a minimum of 10 cm from the wall).

To clean the LG 65NANO79SNA:

1. Unplug the power cord and wipe gently with a soft/dry cloth.

2. Do not spray water or other liquids directly on the TV.

3. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel.

4. When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel.

5. Wring any excess water or cleaner from the cloth before wiping.

The LG 65NANO79SNA falls under the 65NANO79* model category. The wall mounting specifications are:

To prevent the LG 65NANO79SNA from being scratched or damaged during transport:

Move the TV in the box or packing material that it originally came in.

Disconnect the power cord and all cables before moving or lifting.

When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

Use at least two people to move the TV.

When transporting by hand, hold the TV upright; never turn the TV on its side or tilt towards the left or right.

Do not expose the TV to jolts or excessive vibration.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Note: Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. Make sure screws are fastened tightly but not with excessive force.

1. Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. If there are bolts inserted at the eye-bolts position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

Connect an antenna, cable, or cable box to watch TV by connecting an RF cable to the antenna port on the back of the LG 65NANO79SNA. Make sure not to bend the copper wire of the RF cable. Complete all connections between devices before connecting the power cord to the power outlet.

You can operate the TV functions using the single button located on the unit:

Power On: Press the button.

Power Off: Press and Hold the button.

Menu Control: Press the button when the TV is on.

Menu Selection: Press and Hold the button when in the menu.

When the TV is turned on, pressing the button one time allows you to adjust the menu items to turn the power off, change the input source, adjust the volume level, or scroll through saved channels.

The Magic Remote (Model MR20GA) for the LG 65NANO79SNA features the following buttons:

Power: Turns the TV on or off.

STB POWER: Turns your set-top box on or off (requires setup).

Number buttons: Enters numbers.

9**: Accesses Quick Help.

-(DASH): Inserts a dash between numbers (e.g., 2-1).

List: Accesses the saved channel list.

…(More Actions): Displays more remote control functions.

0**: Edits QUICK ACCESS.

Vol +/-: Adjusts the volume level.

Mute: Mutes all sounds. (Press and hold to access Accessibility menu).

Ch ^/v: Scrolls through saved channels.

Microphone Icon: Press to use Voice Recognition (Network connection required).

Home: Accesses the Home menu.

Settings (Gear Icon): Accesses Quick Settings.

Wheel (OK): Press the center to select a menu; scroll to change channels.

Navigation Arrows: Up/Down/Left/Right buttons to scroll menus.

Back: Returns to the previous level.

Guide: Displays the program event.

Input: Changes the input source.

Streaming Service buttons: Connects to Video Streaming Services.

Colored buttons: Access special functions in some menus.

Note: ** indicates pressing and holding the button for more than 1 second.

To register the Magic Remote:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Press the BACK and HOME buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Alternatively, press and hold the GUIDE button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

To read the USER GUIDE embedded in the product:

Go to Settings -> Support -> User Guide.

If the remote is not working:

Check if anything such as tape has been placed over the receiver.

Check if there is any obstacle between the product and the remote control.

Replace the batteries with new fresh ones.

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other products.

Check the power control settings. The power supply may be interrupted.

Check if the auto-off function is activated in the settings menu.

If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Yes. The panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. These dots are deactivated pixels and do not affect the performance and reliability of the TV.

A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.