LG 65NANO79 (01) PDF Document

To reduce the risk of electric shock, do not remove the cover or back of your LG 65NANO79 TV. There are no user-serviceable parts inside. Refer to qualified service personnel.

The symbol of a lightning flash with an arrowhead within a triangle is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within a triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

To prevent the spread of fire, keep candles or other items with open flames away from your LG 65NANO79 TV at all times.

Do not place the LG 65NANO79 TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity such as a bathroom.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.

• Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

If any of the following occur, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when unused for long periods of time.

• Store the accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire.

• Batteries should not be exposed to excessive heat.

• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. It is also recommended to use a certified cable with the HDMI logo attached. The recommended HDMI cable type is an Ultra High Speed HDMI®/™ cable (3 m or less).

Make sure to use screws and a wall mount bracket that meet the VESA standard. The specifications for the LG 65NANO79 TV are as follows:

Please note the following advice to prevent the LG 65NANO79 TV from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV upright as shown in the illustrations in the manual.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing/bending of the frame chassis as it may damage the screen.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove those bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment procedure in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape to prevent the influx of dust and insects.

Antenna/Cable: Connect the TV to a wall antenna socket with an RF cable (75 Ω). If the image quality is poor, you may need a signal amplifier or need to realign the antenna.

Satellite dish: Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).

To enable this feature, navigate using your remote to: → → [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Colour].

For the LG 65NANO79 TV model, the settings are:

• On: Supports 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

• Off: Supports 4K @ 50/60 Hz (4:2:0)

If the device connected to the Input Port also supports Ultra HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Colour] setting to off.

You can simply operate the TV functions using the single button on the unit.

Basic functions:

• Power On (Press)

• Power Off (Press and Hold)

• Menu Control (Press when TV is on)

• Menu Selection (Press and Hold when in the menu)

Adjusting the menu:

When the TV is turned on, press the button one time to access the menu. You can then adjust the Menu items using the button as described in the table below:

The following are the functions of the buttons on your Magic Remote. Note that to use some functions (marked with **), you must press and hold for more than 1 second.

• POWER: Turns the TV on or off.

• STB POWER: Turns your set-top box on or off (after adding it to the universal remote control).

• Number buttons: Enters numbers.

• 9**: Accesses [Quick Help].

• – (DASH): Inserts a dash between numbers.

• LIST: Accesses the saved programmes list.

• … (MORE ACTIONS): Displays more remote control functions.

• QUICK ACCESS**: Edits QUICK ACCESS, a feature to enter a specified app or Live TV by pressing and holding a number button.

• AD/SAP**: Enables the audio descriptions function.

• + / -: Adjusts the volume level.

• MUTE: Mutes all sounds.

• MUTE**: Accesses the [Accessibility] menu.

• ∧ / ∨: Scrolls through the saved programmes.

• Voice recognition: Press to check for recommended content. Network connection is required.

• Voice recognition**: Speak while pressing and holding the button to use the voice recognition feature.

• HOME: Accesses the Home menu.

• HOME**: Shows the previous history.

• Q. Settings: Accesses the Quick Settings.

• Q. Settings**: Displays the [All Settings] menu.

• Wheel (OK): Press the center of the button to select a menu. You can change programmes by using this button.

• △▽◁▷ (up/down/left/right): Press to scroll the menu. If you press these buttons while the pointer is in use, the pointer will disappear and the remote will operate like a general remote control. To display the pointer again, shake the remote left and right.

• BACK: Returns to the previous level.

• BACK**: Clears on-screen displays and returns to the last input viewing.

• GUIDE: Shows the programme guide.

• Streaming Service buttons: Connects to the specific Video Streaming Service.

• RECENTS: Shows the previous history.

• INPUT: Changes the input source.

• INPUT**: Accesses the [Home Dashboard].

• STB MENU: Displays the set-top box Home menu.

• Coloured buttons: These access special functions in some menus.

• Record button: Runs the record function.

• ▷, || (Control buttons): Controls media contents.

How to register the Magic Remote Control:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the (BACK) and (HOME) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (⊕ to ⊕, ⊖ to ⊖).

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated on the settings related time.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

• Turn the TV off/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with the product.

• The panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

The specifications for the wireless module (LGSBWAC02) are as follows:

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the supporting furniture.

• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television set or its controls.