LG 60UK6250PUB (01) PDF Document

For your LG 60UK6250PUB, the term ‘LED TV’ signifies that it is an LCD screen that utilizes LED backlights for illumination.

Please adhere to the following safety instructions when using your LG 60UK6250PUB:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To ensure safety and prevent product damage, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity, such as a bathroom.

• Near any heat source, such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Also, to prevent the spread of fire, keep candles or other items with open flames away from the product at all times.

• Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• When mounting on a table, leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

You should unplug the product immediately and contact your local customer service if any of the following occur:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when unused for long periods of time.

Additionally, do not attempt to modify this product in any way without written authorization from LG Electronics, as accidental fire or electric shock can occur.

Moving:

• When moving, make sure the product is turned off, unplugged, and all cables have been removed.

• It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Keep the packing anti-moisture material or vinyl packing out of the reach of children.

• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

Cleaning:

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel.

• Be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel.

• Make sure to wring any excess water or cleaner from the cloth.

• Make sure to spray just enough water or cleaner onto a dry cloth to wipe the screen.

The specifications for wall mounting the LG 60UK6250PUB are as follows:

When moving or lifting the TV, read the following to prevent it from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the illustrations in the manual.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt towards the left or right.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

To prevent the TV from overturning, you can secure it to a wall:

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove those bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Notes:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Make sure that the screws are fastened tightly. If they are not fastened securely enough, the TV may tilt forward after being installed.

• Do not fasten the screws with excessive force, otherwise they may strip and become loose.

• An optional wall mount can be used. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model.

• Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor.

• If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount.

• We recommend that you use an LG brand wall mount.

• If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

The supported HDMI audio formats are:

• DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz)

• DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

• True HD (48 kHz)

• Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)

• PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

The HDMI ULTRA HD Deep Color setting enhances the picture quality for devices that support it. To access it, go to Picture → Additional Settings → HDMI ULTRA HD Deep Color.

• On: Supports 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

• Off: Supports 4K @ 60 Hz 8 bit (4:2:0)

If the device connected to the input port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color setting to off.

You can operate the TV functions using the single button on the unit.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and Hold the button.

• Menu Control: Press the button when the TV is on.

• Menu Selection: Press and Hold the button when you are in menu control.

Adjusting the Menu:

When the TV is turned on, press the button one time to access the menu. You can then adjust the Menu items using the button with subsequent presses:

• (POWER): Turns the TV on or off.

• TV: Returns to the last TV channel.

• CC/SUB: Recalls your preferred subtitle in digital mode.

• (Q. Settings): Accesses the Quick Settings.

• (Search): Shows the search mode.

• (Input): Changes the input source.

• Number button: Enters numbers.

• -(Dash): Inserts a dash between numbers such as 2-1 and 2-2.

• LIST: Accesses the saved channel list.

• Q.VIEW: Alternates between the two last channels selected.

• QUICK ACCESS*: Access an application or Live TV channel using registered number buttons.

• + VOL -: Adjusts the volume level.

• FAV: Accesses your favorite channel list.

• INFO: Shows information on the current program.

• (MUTE): Mutes all sounds.

• *(MUTE): Accesses the Accessibility menu.

• ^ CH v: Scrolls through the saved channels.

• ^ PAGE v: Moves to the previous or next screen.

• 1, 2 Streaming Service buttons: Connects to the Video Streaming Service.

• (Home): Accesses the Home menu.

• *(Home): Shows the previous history.

• GUIDE: Displays the program event according to time scheduler.

• Navigation button (up / down / left / right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous screen.

• EXIT: Clears all on-screen displays and returns to TV viewing.

• SAP/*: Enables SAP (Secondary Audio Program) Feature.

• REC/*: Starts to record (Only Time MachineReady supported model).

• Media Control buttons (Play, Pause, etc.): Control buttons for media contents.

• (Colored dots): These access special functions in some menus.

*To use the button, press and hold for more than 3 seconds.

Cannot control the TV with the remote control.

• Check if anything such as tape has been placed over the receiver.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with the TV.

• Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance.

• Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for an extended length of time.

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Broadcasting Specifications

Wireless module (LGSWFAC71) Specifications (Only UK62*)

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

To ensure proper and safe television placement, especially for child safety, follow these guidelines:

Tune in to Safety

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

Wall or Ceiling Mount Your Television

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory.

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

The following table lists the hexadecimal key codes for external control functions. These are used for control via RS-232C.

To control the TV’s functions externally from a computer or an A/V control system, you can connect to the USB to Serial converter/RS-232C input jack. The type of control port may vary between models.

USB to Serial converter with USB Cable:

• Connect the USB cable from the PC to the USB IN port on the TV.

• The TV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converters.

RS-232C With RS232C Cable (DE9 D-Sub 9pin Type):

• You need to purchase an RS-232C (DE9, D-Sub 9pin female-to-female type) cable to connect between the PC and the TV’s RS-232C IN (CONTROL & SERVICE) port.

The communication parameters are:

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

To set the ID number for your TV, which allows it to be targeted by external control commands, follow these steps:

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

The model dimensions are not explicitly listed for the 60UK6250PUB in the provided documentation. However, related 65-inch models are detailed, which may provide a general reference.