LG 60LB5610-ZC (01) PDF Document

To attach the stand to your LG 60LB5610-ZC TV, please place the screen facing down on a cushioned table or flat surface to protect it from scratches. The procedure varies slightly depending on your specific model series:

For LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB models:

1. Attach the A Stand Base to the TV set.

2. Secure the B Stand Base to the A Stand Base.

3. Use the provided screws to fasten the stand assembly to the TV. You will need 4 screws (M4 x L20 for 32″ models, M4 x L14 for other sizes).

For LB56**-ZT / ZQ, LB62**-ZE models:

1. Attach the A Stand Base to the TV set.

2. Secure the B Stand Base to the A Stand Base.

3. Use the provided screws to fasten the stand assembly to the TV. You will need 4 screws (M4 x L20 for 32″ models, M4 x L14 for other sizes).

To connect your LG 60LB5610-ZC TV for antenna reception, connect a wall antenna socket to the “ANTENNA/CABLE IN” port on the back of the TV using an RF cable (75 Ω).

Notes:

• To use more than two TVs, you will need a signal splitter.

• If the image quality is poor, consider installing a signal amplifier.

• If the image quality is poor with a connected antenna, try realigning the antenna in the correct direction.

• The supported DTV audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

If your LG 60LB5610-ZC is a satellite model, connect the TV to a satellite dish and a satellite socket using a satellite RF cable (75 Ω). The connection port is labeled “LNB Satellite IN”.

The Euro Scart connection on your LG 60LB5610-ZC transmits video and audio signals from an external device. Connect the external device and the TV using a signal-shielded Euro Scart cable. The TV output signals through the AV1 (TV Out) port depend on the current input mode, as shown in the table below:

You can operate the basic functions of your LG 60LB5610-ZC TV using the joystick button located below the TV screen.

Basic Functions:

Adjusting the Menu:

When the TV is on, press the joystick button once. You can then adjust menu items by moving the joystick up, down, left, or right.

To prevent scratches or damage and to ensure safe transportation of your LG 60LB5610-ZC, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in the box or packing material it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least two people.

• Keep the TV upright during transport; never turn it on its side or tilt it left or right.

• Do not expose the TV to jolts or excessive vibration.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as it may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space between the TV and the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure your LG 60LB5610-ZC TV to a wall (note: this feature is not available for all models):

1. Insert and tighten the eye-bolts (or TV brackets and bolts) on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket to the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Make sure that children do not climb on or hang on the TV.

To wall mount your LG 60LB5610-ZC, you need an optional wall mount bracket that meets the VESA standard. LG recommends that wall mounting be performed by a qualified professional installer.

1. Disconnect the power first.

2. Carefully attach the wall mount bracket to the rear of the TV.

3. Install the wall mount bracket on a solid wall perpendicular to the floor.

Important Cautions:

• Do not over-tighten the screws as this may cause damage to the TV and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Damages or injuries from misuse are not covered by the warranty.

VESA Specifications for LG 60LB5610-ZC:

The descriptions below are for the remote control compatible with LB55** and LB56** series, including your LG 60LB5610-ZC. Make sure to point the remote control toward the remote control sensor on the TV.

To automatically tune the programmes on your LG 60LB5610-ZC, go to SETTINGS → SETUP → Auto Tuning. This function automatically finds and stores all available programmes.

• If the Input Source is not connected properly, programme registration may not work.

• Auto Tuning only finds programmes that are currently broadcasting.

• If the Lock System is turned on, a pop-up window will appear asking for the password.

To select a picture mode optimized for your viewing environment or the programme, navigate to SETTINGS → PICTURE → Picture Mode on your LG 60LB5610-ZC. Available modes include:

• Vivid: Heightens contrast, brightness, and sharpness for vivid images.

• Standard: Displays images in standard levels of contrast, brightness, and sharpness.

• Eco/APS: The Energy Saver feature changes TV settings to reduce power consumption.

• Cinema/Game: Displays the optimum picture for movies or games.

• Sports: Optimizes the video image for high and dynamic actions by emphasizing primary colours such as white, grass, or sky blue.

• Expert 1, 2: A menu for adjusting picture quality that allows experts to enjoy the best TV viewing. This is an adjustment menu for ISF-certified picture tuning professionals.

You can reduce the power consumption of your LG 60LB5610-ZC by using the Energy Saving feature. Go to SETTINGS → PICTURE → Energy Saving. The options are:

• Auto (Depending on model): The TV sensor detects ambient lighting and automatically adjusts screen brightness.

• Off: Turns off the Energy Saving mode.

• Minimum / Medium / Maximum: Applies a pre-set Energy Saving mode.

• Screen Off: The screen is turned off, and only sound is played. Press any button (except the Power button) on the remote to turn the screen back on.

To manage the audio output on your LG 60LB5610-ZC:

• To use the TV speakers: Go to SETTINGS → AUDIO → Sound Out → TV Speaker. Sound will be output through the TV’s speakers.

• To use an external speaker (Optical): Go to SETTINGS → AUDIO → Sound Out → External Speaker (Optical). Sound will be output through a speaker connected to the optical port. SimpLink is supported for this option.

• To use Headphones: Go to SETTINGS → AUDIO → Sound Out → Headphone. Sound will be output through the headphone port.

SIMPLINK allows you to control various multimedia devices with your TV remote via the SIMPLINK menu. To set up and use SIMPLINK:

1. Connect the TV’s HDMI IN terminal to the SIMPLINK device’s HDMI output terminal using a high-speed HDMI® cable (with CEC feature).

2. Select INPUT(OPTION) → SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK function descriptions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen.

• Disc playback: Manages the multimedia device with the TV remote control.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When equipment with SIMPLINK starts to play, the TV will automatically turn on.

• Speaker: Select the speaker either on the home theatre unit or the TV.

To reset your LG 60LB5610-ZC to its factory settings, go to SETTINGS → OPTION → Factory Reset. This will delete all stored information and reset all TV settings. The TV will turn itself off and back on to complete the process.

• If the Lock System is in place, a pop-up window will appear asking for your password.

• Do not turn off the power during the initialization process.

When using a USB storage device with your LG 60LB5610-ZC, please keep the following in mind:

• Use only USB storage devices formatted with the FAT32 or NTFS file system.

• For external USB HDDs, it is recommended to use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• If a USB HDD with a power-saving function does not work properly, turn its power off and on.

• Data on the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility.

• To safely remove a USB device, select Q.MENU → USB Device and select the device. When you see the removal message, you can separate the device from the TV.

Clean your TV regularly to keep it in the best condition. First, make sure to turn the power off and disconnect all cables.

Screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION:

• Avoid touching the screen at all times, as this may damage it.

• Do not push, rub, or hit the screen with your fingernail or a sharp object.

• Do not use any chemicals (like glass cleaner, abrasives, wax, benzene, alcohol, etc.) as this may damage the product.

• Do not spray liquid directly onto the surface.

Power cord:

• Remove any accumulated dust or dirt on the power cord regularly.

If your LG 60LB5610-ZC turns off suddenly, try the following troubleshooting steps:

• Check the power control settings. The power supply may have been interrupted.

• Check if the Automatic Standby, Sleep Timer, or Off Time feature is activated in the TIME settings.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

If you cannot control your LG 60LB5610-ZC with the remote, check the following:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and are properly installed.

If there is no image display and no sound is produced on your LG 60LB5610-ZC, perform these checks:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

If you see a ‘No signal’ or ‘Invalid Format’ message when your LG 60LB5610-ZC is connected to a PC via HDMI, try these steps:

• Turn the TV off and on again using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.