LG 55UK7700PUD (01) PDF Document

To ensure safe operation of your LG 55UK7700PUD TV, please follow these instructions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a compatible cart, stand, tripod, bracket, or table. Use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To prevent fire, electric shock, malfunction, or product deformation, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity such as a bathroom.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

• For a TV with a three-prong grounded AC plug, it must be connected to a three-prong grounded AC outlet. Ensure you connect the earth ground wire to prevent possible electric shock.

• Never touch the apparatus or antenna during a lightning storm.

When moving or lifting the TV, read the following to prevent it from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the illustration.

• Do not expose the TV to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt towards the left or right.

• Avoid touching the screen at all times, as this may result in damage.

• Do not place the product on the floor with its front facing down without padding.

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel.

• Be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel.

• Make sure to wring any excess water or cleaner from the cloth.

• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

• When the TV is turned on for the first time after being shipped from the factory, initialization may take approximately one minute.

• The image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in the manual.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide.

• Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove those bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided.

An optional wall mount can be used. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

Please see the tables below for VESA mounting specifications for various models, including your LG 55UK7700PUD.

You can simply operate the TV functions using the single button on the TV.

Basic functions:

• Power On (Press)

• Power Off (Press and Hold) – All running apps will close.

• Menu Control (Press when TV is on)

• Menu Selection (Press and Hold when in the menu)

Adjusting the menu:

When the TV is turned on, press the button one time. You can adjust the Menu items using the button as follows:

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

* If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

* Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with the TV.

• Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance.

• Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while viewing. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for an extended length of time.

Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Broadcasting Specifications

Wireless module (LGSBWAC72) Specifications

You can connect the USB to Serial converter/RS-232C input jack to an external control device (like a computer or A/V control system) to control the product’s functions externally. Please note that not all models support this, and the cable is not provided.

Connection Types:

• USB to Serial converter with USB Cable: Your LG TV supports PL2303 chip-based USB to serial converters.

• RS-232C With RS232C Cable: You need to purchase an RS-232C (DE9, D-Sub 9pin female-to-female type) cable.

• Phone jack Type: You need to purchase a phone-jack to RS-232 cable for this connection type.

Communication Parameters:

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

Set ID:

You can set the ID number for the TV to control it individually.

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number (1-99) and select CLOSE.

5. When you are finished, press EXIT.