LG 55EW5TF (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD LG 55EW5TF (01) PDF MANUAL


PDF Content Summary: OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 55EW5TF 55EW5TF-A lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved. 2TABLE OF CONTENTS SAFETY PRECAUTION ..................3 - Precautions for the AC Adapter and Power ......4 - Precautions for Moving the Product ......................6 - Precautions for Installing the Product ..................7 - Precautions for Cleaning the Product ...................9 - Precautions for Using the Product.......................10 - Precautions for Using the Remote control ......12 - Precautions for Experiencing Image Retention ...........................................................................13 - Product Disposal ............................................................13 ASSEMBLY AND PREPARATION ............................ 14 - Product Installation ......................................................16 - IR Receiver .........................................................................17 REMOTE CONTROL .................... 18 MAKING CONNECTIONS ........... 20 - Connecting to a PC.......................................................20 - External Device Connection .....................................20 - Using the Input List ......................................................21 - Connecting Multiple Monitors ................................22 TROUBLESHOOTING .................. 23 PRODUCT SPECIFICATIONS ...... 29 LICENSES .................................... 32 3 WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTION The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. WARNING This product cannot be installed outdoors. Only use the product indoors as installed by the installer. 4Precautions for the AC Adapter and Power WARNING • Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. • Operate the display only from a power source(i.e. voltage) indicated in the product specification. - Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified installation company. • Make sure the power cord connect to a properly grounded outlet. - If you do not you may be electrocuted or injured or the product can be damaged. • Insert the power plug or AC adapter firmly so it cannot come loose. - Poor connection may cause a fire or electric shock. • In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. - It can cause electric shock. • Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter. Additionally, do not bend or pull out the power cord or AC adapter with excessive force. - Damaged power cords may cause a fire or electric shock. • Do not connect power cord or AC adapter damaged with sharp objects to power outlet. - You may be electrocuted. • Do not insert a conductor (like a metal chopstick) into one end of the power cord while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cord right after unplugged. - You may be electrocuted. • Do not use with a multi-outlet connected by many electrical product and heating devices. Use an exclusive multi- outlet with a grounding terminal. - A fire can break out due to overheating. 5 • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cord coating may melt and cause fire or electric shock. • Never disassemble, repair or modify the power cord or AC adapter. - This may cause a fire or electric shock. • Please make sure the main power cutoff device is power cord and the product is installed near the wall outlet that is easily accessible. • As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. • Power consumption will be ‘0’ only when the power plug is unplugged. • Use an appliance coupler as a disconnect device. CAUTION • If the outlet, pins of the power plug, or AC adapter is covered with dust, be sure wipe and keep clean. - Overheating due to layers of dust may cause a fire or electric shock. • If the outlet, pins of the power plug, or AC adapter is covered with water, be sure wipe and keep clean. Additionally, Do not touch the power plug or AC adapter with wet hands. - This may cause an electric shock. • Do not turn the product on or off by plugging in or unplugging the power plug from the power outlet. It means do not use the power plug as a switch. - This may cause an electric shock or product malfunction. • Do not unplug the power cord while the product is in use. - Electrical shock can damage the product. 6Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted or the product can be damaged. • When moving the product, Do not shock the product and impact on the front panel of the product. - You may be electrocuted or the product can be damaged. • Comply with the number of people according to weight of product. (Under 25 kg per person, use the equipment when exceed 100 kg) - If use the damaged product again, contact the service center because it can cause electric shock or fire. • Do not hold it upside down while holding only the stand. (It is for stand supported models only.) - This may cause stand warping, panel damage and other types of product damage. CAUTION • Do not dispose the product-packing box. It may be used put the product in the box when carrying it. 7 Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen. - It can cause injury to human, problem to product and damage the display. • Do not put heavy objects on, or hang from, the product. - If the product collapses or is dropped, you may be injured. • Do not touch the surface of product to overheat. - It can cause injury to human. • Install the product firmly fixed on a floor, wall, etc. to prepare against external impact such as wind and earthquake. - You must refer to the manual provided. • Prevent Children from climbing or hanging on the product. - If the product collapses or is dropped, you may be injured. • Do not install it where there are heating devices such as electrical heaters or lighting equipment. - Fire, electrical shock, malfunction may occur. • Do not install this product by yourself as you may injure yourself or cause damage to product. Please contact service engineer authorized by service center. • Do not install this product on a wall if it could be exposed to oil or oil mist. - This may damage the product and cause it to fall. • Do not leave the power or signal cable, etc. on the pathway. - This could cause a trip or fall, which can be caused electrical shock, fire, product breakdown, or injury. • Do not let the product drop when connecting it to an external device connected with a short cable. - This may cause injury and damage to the product. • If you dropped the product or the case is broken, turn off the product and unplug the power cord and contact the service center. - If you continue to use without taking proper measures, electrical shock or fire can occur. • Install the product in a dry place where it is not near dust and water. Avoid high temperatures and humidity. - This may cause electrical shock, fire or product damage. • Safely install the product in a place that can hold the weight of the product. - A lack of strength may cause the product to fall. • Take a comfortable and natural position to relax the muscles when working with a product. 8 CAUTION • Install the product where no Electromagnetic Interference occurs. • If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places such as where there is an abundance of fine dust or oil mist, chemical substances are used, exposed to direct sunlight, the temperature is very high or low, the humidity is very high. • Make sure the product is well ventilated by Installing at a distance (100 mm or more) from the wall. - If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat buildup. • Do not cover the product with tablecloth or curtain or other material (e.g. plastic) while plugged in to block the ventilation hole of the product. - The product can be deformed or fire can break out due to overheating inside the product. • Do not install the product in an area with poor ventilation (e.g. on a bookshelf, in a closet) or outside and avoid placing on cushions or carpets. - The product could catch fire due to overheating inside the product. • Install the product on a flat and stable place that is large enough to support the product. - If the product is dropped, you may be injured or the product may be broken. • When installing the product on a shelf or cabinet, make sure that the bottom end of the product is not protruding forward. - The product may fall due to unbalanced center of gravity, which may cause personal injury or damage to the product. Be sure to use cabinets or shelves that fit your product. 9 Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. • When cleaning the product, unplug the power cord and wipe gently with a soft cloth to prevent scratching. - An electric shock may occur or damage to the screen as get a scratch. • When you want to clean the front frame, spray water onto a soft cloth 2 to 4 times and wipe in one direction only. - Too much moisture may cause staining. CAUTION • When cleaning the product or the screen, unplug the power cord and wipe it gently with a soft cloth. Do not spray water or other liquids directly on the product. Especially, do not clean your product with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product or its panel. - This may result in fire, electric shock or product damage (deformation, corrosion or breakage). 10Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired vision. • Listening at high volume or using for a long time can cause damage to your hearing. • In the event that liquid or a foreign object falls into the product, please switch it off and unplug it from the wall outlet and contact the service center. - Otherwise, the product may cause fire or electric shock. • In the event that no image appears on the screen or no sound is heard, stop using the product. Switch it off immediately, unplug it from the power outlet and contact the service center. - Otherwise, the product may cause fire or electric shock. • Do not drop an object or impact on the product or screen. - It can cause injury to human, problem to product and damage the screen. • If you can smell smoke or other odors or hear a strange sound, unplug the power cord and contact the service center. - If you continue to use the product without taking proper measures, it may cause electrical shock or fire. • Do not attempt to disassemble, repair or modify the product yourself. Please contact service center if you need to repair it. - Fire or electric shock can occur. • Do not place objects filled with liquids, such as vases, cups, etc. on over of the product to prevent liquid from entering the product. - Failure to do so may result in fire, electric shock, malfunction or deformation. • Do not push hard on or scratch the product’s surface with your hands or sharp objects, such as nails, pencils or pens. Do not shock or scratch the front and sides of the screen with metallic objects. - This may damage the products and cause it to malfunction. • Do not touch the product if it has been exposed to sunlight or an intense light because it could be hot. 11 • Do not use high voltage electrical goods near the product (e.g., a bug zapper). - This may result in product malfunction if it receives an electrical shock. • If there is a gas leak, do not touch the outlet, and open the windows for ventilation. - Otherwise, the product may cause fire or electric shock. • If you dropped the product or the case is broken, turn off the product and unplug the power cord. - If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center. • Keep small accessories out of the reach of children. - If a child swallows it, consult a doctor immediately. • Keep out of reach of children from the product. Also, do not throw toys or objects to the product or screen. - It can cause injury to human, problem to product and damage the screen. • All the power sources must be disconnected by removing the power cables to remove all power from the unit. CAUTION • This panel is an advanced product that contains millions of pixels. You may occasionally see pixel spots when viewing the screen. Since these deactivated pixels are not a defect, the performance and reliability of the product is not affected. • Do not put or store inflammable substances near the product. - There is a danger of explosion or fire. • Keep the proper distance from the product. - It can cause damage to your vision if you look at the product too closely. • Set the appropriate resolution and frequency by products. - It can cause damage to your vision. • Take a regular break when working with the product for a long time. 12Precautions for Using the Remote control WARNING • Avoid places with high humidity. - It may cause electrical shock or damage the product. • Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. - It may cause fire and you may be injured. • Make sure that children do not swallow the remote control batteries when you replace them. Keep batteries out of reach of children. - If a child swallows a battery, consult a doctor immediately. • Do not dispose of batteries in a fire. - Please dispose batteries at a local recycling center or a retail store that handles batteries. • Used batteries, which include rechargeable batteries, should be recycled separately from waste. - Please dispose used batteries and rechargeable batteries at a local recycling center or a retail store that handles batteries. CAUTION • Do not short circuit and disassemble of batteries. - It may cause electrical shock or fire. • The remote control may not function properly in sunlight or under a strong lamp. Move the product if it is being used in these conditions. • Check if there is any obstacle between the product and the remote control. • Do not mix new batteries with old batteries. - Overheating or leaking batteries may cause fire or electric shock. • Only use the specified type of battery. Do not insert batteries that are not rechargeable into the charger. - Overheating or leaking batteries may cause fire or electric shock. 13 Precautions for Experiencing Image Retention • Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. - Use a screen saver when using the monitor for a prolonged period of time. Product Disposal • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority. 14ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. • Connect the power cord to the product before you plug it into a wall outlet. Plugging the power cord into a wall outlet first may cause an electric shock, which can also damage the product. • Do not use the product where its front/rear surfaces are exposed to direct sunlight. • Neither a separate stand nor a wall-hanging unit is provided with this product. NOTE • The accessories provided with your product may vary depending on the model or region. • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website partner.lge.com and download the latest software for your model. • The product's quality is not guaranteed for use in direct sunlight or excessive dust. 15 WARNING • The product warranty does not cover any electrostatic damage to parts that may occur during product installation. Wear the appropriate gear that can prevent electrostatic discharge (ESD) when installing the product. • The serial number on the panel and that on the signage box must match. If they do not, spots may appear on the screen or the product may not function properly. C-PCB LW650PQL (HL) (A1) 16Product Installation Neither a separate stand nor a wall-hanging unit is provided with this product. CAUTION • Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on the ceiling, it may fall down and cause an injury. Contact a nearby agency or installation specialist. • Do not climb or hang on the product. NOTE • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. If there is no other option but to mount the product on the wall, make sure that sufficient ventilation is provided before installation. - Failure to do so may result in a fire due to the increase in the internal temperature. WARNING • If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries can be avoided by taking the following simple precautions. - Use only fixing instruments and furniture which are able to securely support the product. - Ensuring the monitor is not overhanging the edge of the supporting furniture. - Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support. - Not placing cloth or other materials between the monitor and supporting furniture. - Educating children about the dangers of climbing on furniture to reach the monitor or its controls. - Install the product on a wall on which anchor bolts can be fixed. - Install the product where it can be safely supported. (On concrete, plywood, MDF, etc.) 17 IR Receiver This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. IR Receiver 18REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories. CAUTION • Do not mix old and new batteries, as this may damage the remote control. • Ensure the remote control is always pointed toward the monitor’s IR receiver. • Some features of the remote control may not be supported in certain models. • The product’s internal and external batteries should not be exposed to excessive heat such as direct sunlight, fire, or the like. (POWER) Turns the monitor on or off. Turns the monitor on. Turns the monitor off. Adjusts the brightness of the picture to reduce energy consumption. (INPUT) Selects the input mode. The function is not supported in this model. Number and Alphabet buttons Enters numerical or alphabetical characters depending upon the setting. Toggles between numerical and alphabetical. Deletes the entered numerical or alphabetical character. (Volume Up/Down Button) Adjusts the volume. Selects the Aspect Ratio mode. Automatically adjusts picture position and minimizes image instability (available for RGB input only). (MUTE) Mutes all sounds. Adjusts the brightness of the display. The function is not supported in this model. 19 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (Navigation Buttons) Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function. Quit all OSD tasks and applications. Allows you to control various multimedia devices to enjoy multimedia simply by using the remote control through the SimpLink menu. Selects the TILE Mode. When the Picture ID number matches the Set ID number, you can control whichever monitor you want in multi-display format. (USB Menu Control Buttons) Controls media playback. (May not be supported on some models.) 20MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the * feature. * : a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up. • When connecting a PC to this product with a USB cable (Type A to Type B), touch the product’s screen to control the connected PC. External Device Connection Some of the cables are not provided. Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode. For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended. NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a HDMI cable. • If you turn the monitor on when the set is cold, the screen may flicker. This is normal. • Sometimes red, green, or blue spots may appear on the screen. This is normal. • Use a High Speed HDMI®/TM cable (shorter than 3 meters). • Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. • Recommended HDMI Cable Types - High Speed HDMI®/TM Cable - High Speed HDMI®/TM Cable with Ethernet 21 • If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI. • If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode. • You may experience compatibility issues if you use HDMI-PC mode. • Make sure the power cable is disconnected. • If you connect a gaming device to the monitor, use the cable provided with the gaming device. • When connecting to an external PC for use as a touch screen, it takes time for the product to recognize the touch screen device to switch touch input between the external PCs, so the touch function may not work for a while. CAUTION • Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the screen. • Avoid displaying static images on the screen for a long period of time to prevent image retention. Use a screensaver if possible. • A wireless communication device near your monitor can affect the image. Using the Input List (HOME) → • → 22Connecting Multiple Monitors To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product, and then connect the other end to the connector of the product you wish to connect to. NOTE • Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP. 23 TROUBLESHOOTING Ů Each model may have different points to check. Ů For information on your PC settings, refer to the Windows Help. Issues Related to Use • The power won’t turn on. - Check if the power cord is correctly plugged into the power outlet. - Try turning the power on after disconnecting the AC adapter and cleaning the contacting port. • The ‘Unknown Product’ message appears when the product is connected. - Check if the driver of PC (graphics card) has been installed. - Check if the plug and play function is supported by the PC (graphics card) user manual. Issues Related to Screen (Video) • A message saying ‘No signal’ or ‘Invalid Format’ appears. - The signal cable is not connected between the PC and the product, or the cable connection status is unstable. Check the signal cable. - Access the input menu to check the input signal. - The signal from the PC (Graphics card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the specifications in this manual. • The position of the screen is incorrect. - Check if the graphics card resolution and frequency are supported by the product. If the frequency exceeds the supported range, use PC settings to set the resolution to the recommended value. - D-Sub analog signal - Press the button in the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. 24 • The screen is displayed abnormally. - Connect the signal cable that matches with the source input signal. - When connecting the panel and the Signage box, check their serial numbers and make sure they match. If the serial numbers match, unplug the power cord and plug it in again to run the Clear Panel Noise feature. (The system will reboot automatically after running the feature.) You can also run the feature in (SETTINGS) [Display] [Advanced Settings] [OLED Panel Settings] [Clear Panel Noise] menu. • Images are flickering or fluttering on the screen. - If you turn the monitor on when it is cold, the screen may flicker. This is normal. - Make sure that the current resolution and frequency settings of the graphics card are supported by the monitor. • Stripes appear in the background. - D-Sub analog signal - Press the button in the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. • Horizontal noise appears or the characters look blurred. - D-Sub analog signal - Press the button in the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. • The image is not displayed. - Check that the cable is properly connected between the panel and the Signage box. Issues Related to Screen (Colour) • Screen has poor colour resolution (16 colours). - Use PC settings to set the colour to 24 bits (True Colour) or above. • Screen colour is unstable or mono-coloured. - Check the connection status of the signal cable. Or, re-insert the PC graphics card. • Black spots or bright spots appear on the screen. - Some pixels (red, green, blue, black) are visible on the screen due to the unique characteristics of the display panel. This is not a malfunction of the product. • The screen’s brightness seems dark. - Adjust brightness and contrast again. - Backlight may need repair. 25 Issues Related to Sound • There is no sound output. - See if the audio cable is connected properly. - Adjust the volume of the product or external device. - See if the sound is set properly. • Sound is too dull. - Select the appropriate equalizer sound. • Sound is too low. - Adjust the volume of the product or external device. • For some models, you will need to purchase external speakers separately since they do not have speakers built-in. Other Issues • The power suddenly turned off. - Check if the auto-off function is activated on the settings related time. - Power source has not being supplied properly. See if the product power cord is connected properly. - Check the power control settings. - Check if the fan is working properly. View the fan status in (HOME) [Information] [Fan Status]. CAUTION • Since afterimage can occur when a specific fixed screen is used for a long time, to reduce after-images, it is recommended not to exceed the recommended daily operation time set for the screen size and to display the video content with a small number of fixed characters or logos. Recommended daily operation time (55 inches: 18 hours, 65 inches: 12 hours) • A few horizontal lines may appear on the screens while running the [Clear Panel Noise] feature. This is normal, so there is no need for concern. If the power is turned on or a power failure occurs while the [Clear Panel Noise] feature is running, the feature may not work properly. • Turn the power on five minutes after running the [Clear Panel Noise] feature. • The external speakers connected to the product may make a sound while you are running the [Clear Panel Noise] feature. • [Clear Panel Noise]: Correct issues that may arise on the screen when it is turned on for a long period of time. • Use the [Screen Protection Mode Setting] feature in [OLED Panel Settings] to effectively prevent the formation of an afterimage. 26Issues Related to Touch • Touch does not respond. - This may occur when the USB cable between PC and product is not connected. Remove the USB cable and connect it again in 10 seconds. - Make sure that your PC’s power cord is firmly plugged into a power outlet and restart your PC. - Touch may not respond when the system is down due to the unstable network. Reconnect the LAN cable or restart your PC. - If your PC and product are not connected using a signal cable, touch does not respond. Check the signal cable connection. - Touch may not respond when the product is powered off. Check the product power. - If you do not use a grounded outlet, it may cause a break or touch error. Always connect the power cord to a grounded outlet. - Check if the screen is currently on. - A break or touch error may occur as below case. If touching the screen only with nail or fingertip • The location of a touch does not correspond to the touch coordinates. - This may occur when the touch screen is not calibrated properly. Change your tablet PC settings. • A touch is applied to a monitor other than the one I intended. - This may occur if the monitor is not set as the default monitor when you are using multiple monitors. Set the monitor as the default monitor. - This may occur when the touch screen is not calibrated properly. Change your tablet PC settings. • Multi-touch does not respond. - The content played (e.g. Flash Player, Paint, etc.) may not support Multi-touch points. Make sure that you use a content that supports Multi-touch point. - Remove the USB cable and connect it again in 10 seconds. - Run the content (e.g. Flash Player, Paint, etc.) again. - Restart your PC. - On the edge of the touch screen, multi-touch may work unstably. - If the interval between two touches is too short, a touch error may occur. 27 Image sticking • After-image appears when the product is turned off. - If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. - When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking. This is normal for display products. • When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image remains visible. This phenomenon is referred to as image sticking. • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective. 28 • Recommended operating conditions 1 Change the background and the character colours using the same time interval. - When changing colours, using complementary colours helps to prevent image sticking. A A ITO or MoTi Pixel Layer 2 Change the image using the same time interval. - Make sure that the characters or images before changing the image remain in the same location after changing the image. 29 PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). OLED screen Screen type Thin Film Transistor (TFT) OLED Screen Operating conditions Daily usage 18 hours (video) Video signal Maximum resolution 3840 x 2160 @ 30 Hz - This may not be supported on some OS or graphics card types. Recommended resolution 1920 x 1080 @ 60 Hz - This may not be supported on some OS or graphics card types. Horizontal frequency 30 kHz to 83 kHz Vertical frequency 56 Hz to 60 Hz Synchronization Separate Sync, Digital Input/ Output ports Embedded battery Applied Environmental Conditions Operating Temperature 0 °C to 40 °C Operating Humidity 10 % to 80 % Storage Temperature -20 °C to 60 °C Storage Humidity 5 % to 85 % OLED Panel Pixel Pitch 0.630 mm (H) X 0.630 mm (V) Power Rated Voltage AC 100-240 V ~ 50/60 Hz 3.7 A Power Consumption On Mode: 250 W (Typ.) Sleep Mode (HDMI, DisplayPort): ≤ 3.0 W Off Mode: ≤ 0.5 W Dimensions (Width x Height x Depth) / Weight Display 1225.5 mm x 832.9 mm x 7.0 mm / 14.6 kg Signage Box 782.8 mm x 238.4 mm x 34.7 mm / 3.4 kg

30Display (Unit: mm) 1225.5 832.9 7.0 Signage Box

(Unit: mm) 238.4782.8 34.7 31 HDMI/ DisplayPort (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 60 3840 x 2160 67.5 30 HDMI/ DisplayPort (DTV) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 480/60p 31.5 60 576/50p 31.25 50 720/50p 37.5 50 720/60p 45 60 1080/50i 28.1 50 1080/60i 33.75 60 1080/50p 56.25 50 1080/60p 67.432 59.94 1080/60p 67.5 60 2160/30p 67.5 30 NOTE • Vertical frequency: The product display functions by the screen image changing dozens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz. • Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. 32LICENSES Supported licenses may differ by model. For more information of the licenses, visit lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. Temporary noise is normal when powering ON or OFF this device.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply