LG 50NANO79 (01) PDF Document

To ensure safe operation of your LG 50NANO79, please adhere to the following safety instructions:

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Installation Environment:

Do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity such as a bathroom.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.

Ventilation:

• Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Power Cord:

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

General Safety:

• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

• For outdoor antenna grounding, follow precautions to avoid contact with power lines or circuits.

• For grounded devices, ensure the TV’s three-prong grounded AC plug is connected to a three-prong grounded AC outlet to prevent electric shock.

• Never touch the apparatus or antenna during a lightning storm.

• Do not insert metallic or inflammable objects into the product.

• Do not touch the end of the power cord while it is plugged in.

• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper).

• Do not attempt to modify this product in any way without written authorization from LG Electronics.

• Use only authorized attachments/accessories approved by LG Electronics.

• Never disassemble the AC adapter or power cord.

• Handle the adapter carefully to avoid dropping or striking it.

• To reduce risk of fire or shock, do not touch the TV with wet hands. If power cord prongs are wet or dusty, dry them completely.

If any of the following occur, unplug the LG 50NANO79 immediately and contact your local customer service:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when unused for long periods of time.

Even if the TV is turned off by remote control or button, the AC power source is still connected to the unit if not unplugged.

• Store the accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire.

• Batteries should not be exposed to excessive heat.

• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Please note the following advice to prevent the LG 50NANO79 from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV upright.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• When transporting, keep the TV upright; never turn it on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing or bending of the frame chassis, as it may damage the screen.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage.

• When attaching the stand, place the screen facing down on a cushioned table or flat surface to protect it from scratches.

• Keep the packing anti-moisture material or vinyl packing out of the reach of children.

• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

When cleaning your LG 50NANO79, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.

• The image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

• The available menus and options may differ from the input source or product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on/off button, turning off the device and unplugging the power cord.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI Cable Type: Ultra High Speed HDMI®/™ cable (3 m or less).

To wall mount your LG 50NANO79, make sure to use screws and a wall mount bracket that meet the VESA standard. The standard dimensions are described in the following table.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

To prevent your LG 50NANO79 from overturning, you can secure it to a wall. This is especially important for the safety of children.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove those bolts first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Please note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Ensure screws are inserted correctly and fastened securely. Do not use too much force or overtighten the screws.

Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. LG recommends that wall mounting be performed by a qualified professional installer.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment procedure in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set using the wall mounting bracket, fix it carefully so it does not drop.

• When mounting the TV on a wall, make sure not to install it by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape to prevent the influx of dust and insects (depending on the model).

• Do not use a sharp object when detaching the cable cover. This could damage the cable or the cabinet and may also cause personal harm (depending on the model).

Antenna/Cable:

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

Satellite Dish (Depending on model):

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).

When connecting an HDMI cable, the TV and external devices should be turned off and unplugged. If a connected device supports Ultra HD Deep Colour, your picture may be clearer. If the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Colour] setting to off.

To access the setting, go to: → → [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Colour]

The supported formats are:

For NANO79*, NANO80*, NANO81* models:

• On: Supports 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

• Off: Supports 4K @ 50/60 Hz (4:2:0)

For models other than NANO79*, NANO80*, NANO81*:

• On: Supports 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), and for ports 3 & 4 only, 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)

• Off: Supports 4K @ 50/60 Hz (4:2:0)

Available external devices include Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, gaming devices, and others.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through the recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device, use the cable supplied with it.

• In PC mode, there may be noise associated with resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the [Picture] menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

• If ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance.

• When connecting via a wired LAN, it is recommended to use a CAT 7 cable (only when LAN port is provided).

• Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

You can operate the TV functions using the single button on the TV.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and hold the button. (All running apps will close, and any recording in progress will stop).

• Menu Control: Press the button when the TV is on to access the menu.

• Menu Selection: Press and hold the button to select a menu item.

Adjusting the Menu:

When the TV is on, press the button one time to bring up the menu. You can then adjust the menu items using the button:

The descriptions are based on the buttons on the remote control. Press and hold a button for more than 1 second for functions marked with **.

• (POWER): Turns the TV on or off.

• (STB POWER): Turn your set-top box on or off.

• Number buttons: Enters numbers.

• – (DASH): Inserts a – between numbers like 2-1 and 2-2.

• LIST: Accesses the saved programmes list.

• … (MORE ACTIONS): Displays more remote control functions.

• QUICK ACCESS**: Edits QUICK ACCESS, a feature to enter a specified app or Live TV by pressing and holding a number button.

• AD/SAP**: Audio descriptions function will be enabled.

• + – : Adjusts the volume level.

• (MUTE): Mutes all sounds.

• (MUTE)**: Accesses the [Accessibility] menu.

• ∧ ∨: Scrolls through the saved programmes.

• (Voice recognition): Network connection is required. Check for recommended content.

• (Voice recognition)**: Speak while pressing and holding the button to use the voice recognition feature.

• (HOME): Accesses the Home menu.

• (HOME)**: Shows the previous history.

• (Q. Settings): Accesses the Quick Settings.

• (Q. Settings)**: Displays the [All Settings] menu.

• Wheel (OK): Press the center of the button to select a menu. You can change programmes by using this button.

• △ ▽ ◁ ▷ (up/down/left/right): Press to scroll the menu. If you press these buttons while the pointer is in use, the pointer will disappear, and the Magic Remote will operate like a general remote.

• (BACK): Returns to the previous level.

• (BACK)**: Clears on-screen displays and returns to the last input viewing.

• GUIDE: Shows programme guide.

• Streaming Service buttons: Connects to the Video Streaming Service.

• RECENTS: Shows the previous history.

• (INPUT): Changes the input source.

• (INPUT)**: Accesses the [Home Dashboard].

• STB MENU: Displays the set-top box Home menu.

• Coloured buttons: These access special functions in some menus.

• (Record): Runs the record function.

• ▷, || (Control buttons): Controls media contents.

How to register the Magic Remote Control

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the (BACK) and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Alternatively, press and hold the GUIDE button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

Battery Information:

• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

• Failure to match the correct polarities of the battery may cause it to burst or leak, resulting in fire, personal injury, or ambient pollution.

If you cannot control the TV with the remote control, try the following steps:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and are properly installed, matching the (+) and (-) terminals.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated on the settings related time.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

• Turn the TV off and on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal; there is nothing wrong with the product.

• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and colour of the panel depending on your viewing position (left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not a malfunction.

• Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

¹ Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.)

² Only DVB-T2/C/S2 support models.

³ Depending on model.

The specifications apply to NANO79*, NANO80*, and NANO81* models.

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.