LG 50LB561B-ZC (01) PDF Document

To attach the stand to your LG 50LB561B-ZC TV, please follow these general steps based on the diagrams in the manual. Note that there are different stand types depending on your specific model series.

1. Place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Align the stand base (or two separate stand feet) with the corresponding slots on the bottom of the TV.

3. Secure the stand to the TV using the provided screws. For models in the 39/42/47/50/55/60LB56** series, you will typically use four M4 x L14 screws.

4. Ensure the screws are tightened firmly but do not overtighten, to prevent damage.

Connect the LG 50LB561B-ZC TV to a wall antenna socket using an RF cable (75 Ω) into the “ANTENNA / CABLE IN” port on the back of the TV.

Important Notes:

• Use a signal splitter if you need to connect more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve image quality.

• If image quality is poor with a connected antenna, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied with the TV.

• Supported DTV Audio formats are: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC.

To transmit video and audio signals from an external device, connect the device to your LG 50LB561B-ZC TV using a Euro Scart cable. Ensure any Euro Scart cable used is signal shielded. The TV’s AV1 port functions as an input and an output (TV Out). The type of signal output depends on the current input mode, as shown in the table below:

You can connect various external devices such as HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices to your LG 50LB561B-ZC TV.

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

You can operate the TV functions by pressing or moving the joystick button located below the TV screen.

Basic Functions:

• Power On: When the TV is off, place your finger on the joystick button and press it once and release it.

• Power Off: When the TV is on, press and hold the joystick button for a few seconds and release it. (If the Menu is on screen, pressing and holding will exit the Menu.)

• Volume Control: Move the joystick button left or right to adjust the volume.

• Programmes Control: Move the joystick button up or down to scroll through saved programmes.

Adjusting the Menu:

When the TV is turned on, press the joystick button once. You can then adjust the Menu items by moving the joystick button up, down, left, or right.

• TV off: Turns the power off.

• Settings: Accesses the main menu.

• Close: Clears on-screen displays and returns to TV viewing.

• Input List: Changes the input source.

To prevent your LG 50LB561B-ZC from being scratched or damaged and for safe transportation, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• Do not expose the TV to jolts or excessive vibration during transport.

• Keep the TV upright; never turn it on its side or tilt it left or right.

• Do not apply excessive pressure that could cause flexing or bending of the frame, as it may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure the TV to a wall for stability, you can follow these steps:

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt positions, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Brackets, bolts, and ropes are not provided. Use a platform or cabinet that is strong and large enough to support the TV securely.

To wall mount your LG 50LB561B-ZC, ensure you use screws and a wall mount bracket that meet the VESA standard. LG recommends that wall mounting be performed by a qualified professional installer. Disconnect power before starting.

The specifications for the 42/47/50/55LB56** model series are as follows:

Important Cautions:

• Do not overtighten the screws as this may cause damage to the TV and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

• The length of screws may differ depending on the wall mount. Make sure to use the proper length.

To use the remote control, point it toward the remote control sensor on the TV. The functions of the buttons for the LB56** model series are as follows:

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV, and DTV programmes.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• AD: By pressing the AD button, the audio descriptions function will be enabled.

• RATIO: Resizes an image.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/- buttons: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• GUIDE: Shows the programme guide.

• MUTE: Mutes all sounds.

• P buttons: Scrolls through the saved programmes.

• PAGE buttons: Moves to the previous or next screen.

• Teletext buttons (TEXT / T.OPT): These buttons are used for teletext.

• INFO: Views the information of the current programme and screen.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AV MODE: Selects an AV mode.

• Control buttons (Play, Pause, etc.): Controls the MY MEDIA menus, Time MachineReady control, or SIMPLINK compatible devices.

• Colour buttons (Red, Green, Yellow, Blue): Access special functions in some menus.

You can adjust the picture settings on your LG 50LB561B-ZC using various menu options.

Picture Wizard:

Go to SETTINGS → PICTURE → Picture Wizard III. This feature calibrates and adjusts for optimum picture quality using the remote control without expensive pattern devices.

Picture Mode:

Go to SETTINGS → PICTURE → Picture Mode. Select the mode optimized for your viewing environment or programme.

• Vivid: Heightens contrast, brightness, and sharpness.

• Standard: Displays images in standard levels.

• Eco/APS: The Energy Saver feature changes settings to reduce power consumption.

• Cinema/Game: Displays the optimum picture for movies and games.

• Sports: Optimizes the image for high and dynamic actions.

• Expert 1, 2: Menu for adjusting picture quality that allows experts to enjoy the best TV viewing. This is for ISF-certified professionals.

Advanced Control / Expert Control:

Go to SETTINGS → PICTURE → Picture Mode → Advanced Control / Expert Control. This allows you to calibrate the screen for each picture mode.

• Dynamic Contrast: Adjusts contrast to the optimal level according to image brightness.

• Dynamic Colour: Adjusts colours to appear more natural.

• Skin Colour, Sky Colour, Grass Colour: Sets specific colour spectrums separately.

• Gamma: Sets the gradation curve.

• Colour Gamut: Selects the range of colours that can be expressed.

• Edge Enhancer: Shows clearer and more distinctive edges.

• Colour Temperature: Adjusts the overall tone of the screen.

• Colour Management System: A system used by experts to adjust colour with a test pattern.

To use the TV speaker:

Go to SETTINGS → AUDIO → Sound Out → TV Speaker. Sound will be output through the TV’s internal speakers.

To use an External Speaker (Optical):

Go to SETTINGS → AUDIO → Sound Out → External Speaker (Optical). Sound is output through the speaker connected to the optical port. SimpLink is supported.

To set up Digital Sound Out:

Go to SETTINGS → AUDIO → Sound Out → External Speaker (Optical) → Digital Sound Out. The settings are as follows:

To connect and use an LG audio device:

Go to SETTINGS → AUDIO → Sound Out → LG Sound Sync (Optical). Connect an LG audio device with the appropriate logo to the optical digital audio output port.

To synchronize audio and video:

Go to SETTINGS → AUDIO → AV Sync. Adjust. If you set this to ON, you can adjust the sound output (TV speakers or SPDIF) to the screen image.

SIMPLINK allows you to control and manage various multimedia devices conveniently via the SIMPLINK menu.

Setup Steps:

1. Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI output terminal using a high-speed HDMI® cable (with CEC feature added).

2. Select INPUT(OPTION) → SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK Function Descriptions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly.

• Disc playback: Manages the multimedia device with the TV remote control.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When the equipment with SIMPLINK function connected to an HDMI terminal starts to play, the TV will automatically turn on.

• Speaker: Select the speaker on either the home theatre unit or the TV.

To reset your LG 50LB561B-ZC to its factory settings, follow these steps:

1. Go to SETTINGS → OPTION → Factory Reset.

2. This action will delete all stored information and reset all TV settings.

3. The TV will turn itself off and then back on, and all settings will be reset.

Important:

• If the Lock System is enabled, a pop-up window will appear asking for the password.

• Do not turn off the power during the initialization process.

When using a USB storage device with your LG 50LB561B-ZC, please be aware of the following:

• If the USB device has a built-in auto recognition program or uses its own driver, it may not work.

• Some USB devices may not work or may work incorrectly.

• Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

• For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• If a USB HDD with a power-saving function does not work properly, turn the power off and on. Refer to the user manual of the USB HDD for more information.

• Data on the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility.

To remove a USB device, go to Q.MENU → USB Device and select the device you want to remove. Once you see a confirmation message, you can safely separate the device from the TV.

Clean your TV regularly to maintain performance and extend its lifespan. First, make sure to turn the power off and disconnect all cables.

Screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION:

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

Remove the accumulated dust or dirt on the power cord regularly.

The product specifications for the LG 50LB56** model series are as follows: