LG 49LB628U-ZB (01) PDF Document

To attach the stand to your LG 49LB628U-ZB, please follow these steps. Note that the stand design may vary slightly depending on your specific model series (LB55**, LB56**, LB62**).

1. Place the TV screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Align the Stand Base (Part A) with the TV’s mounting slot.

3. Align the secondary Stand Base (Part B) with Part A on the TV.

4. Secure the stand assembly to the TV using the provided screws. Depending on your model, you will use either four M4 x L14 screws or four M4 x L20 screws. The manual specifies which screws are for which model size.

To connect your LG 49LB628U-ZB to a wall antenna socket, use an RF cable (75 Ω).

Notes:

• If you want to use more than 2 TVs, use a signal splitter.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• Supported DTV Audio for the LG 49LB628U-ZB are: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC.

For satellite models of the LG 49LB628U-ZB, connect the TV to a satellite dish to a satellite socket using a satellite RF cable (75 Ω). The port is labeled “LNB Satellite IN”.

You can transmit video and audio signals from an external device to your LG 49LB628U-ZB by connecting the external device and the TV with a Euro Scart cable. Ensure that any Euro Scart cable you use is signal shielded.

The AV1 (TV Out) port functions as follows based on the current input mode:

Note for 3D Models: When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable.

When connecting various external devices like HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, or gaming devices to your LG 49LB628U-ZB, please keep the following in mind:

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through the DVD recorder or VCR.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

You can operate your LG 49LB628U-ZB’s functions by pressing or moving the joystick button located below the TV screen.

Basic Functions:

• Power On: When the TV is off, press the joystick button once and release it.

• Power Off: When the TV is on, press and hold the joystick button for a few seconds and release it. (If the Menu is on screen, this action will exit the menu instead).

• Volume Control: Move the joystick left or right to adjust the volume.

• Programmes Control: Move the joystick up or down to scroll through saved programmes.

Note: Be careful not to press the joystick button when you intend to move it up, down, left, or right. If you press it first, you cannot adjust the volume or scroll programmes.

Adjusting the Menu:

When the TV is on, press the joystick button once to bring up the menu. You can then adjust menu items by moving the joystick up, down, left, or right.

• TV off: Turns the power off.

• Settings: Accesses the main menu.

• Close: Clears on-screen displays and returns to TV viewing.

• Input List: Changes the input source.

To prevent your LG 49LB628U-ZB from being scratched or damaged and to ensure safe transportation, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting, do not expose the TV to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it to the left or right.

• Do not apply excessive pressure to cause flexing or bending of the frame chassis as it may damage the screen.

Mounting on a table:

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a wall (This feature is not available for all models):

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Caution: Make sure that children do not climb on or hang on the TV.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

To wall mount your LG 49LB628U-ZB, make sure to use screws and a wall mount bracket that meet the VESA standard. It is recommended that wall mounting be performed by a qualified professional installer.

The standard dimensions for your LG 49LB628U-ZB are:

• VESA (A x B): 400 x 400 mm
• Standard screw: M6
• Number of screws: 4
• Recommended Wall mount bracket models: LSW440B, MSW240

CAUTION:

• Disconnect the power first, and then move or install the TV. Otherwise, electric shock may occur.

• Use an authorized LG wall mount. Do not over-tighten the screws as this may cause damage and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

The functions of the remote control for your LG 49LB628U-ZB are as follows:

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV and DTV programme.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• GUIDE: Shows programme guide.

• AV MODE: Selects an AV mode.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/- buttons: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• 3D: Used for viewing 3D video.

• MUTE: Mutes all sounds.

• P (up/down): Scrolls through the saved programmes.

• PAGE (up/down): Moves to the previous or next screen.

• Teletext buttons (TEXT / T.OPT): These buttons are used for teletext.

• INFO: Views the information of the current programme and screen.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AD: By pressing the AD button, audio descriptions function will be enabled.

• REC/• (Record): Starts to record and displays record menu (Only Time MachineReady supported model).

• Control buttons (Play, Pause, etc.): Controls the MY MEDIA menus, Time MachineReady control or the SIMPLINK compatible devices.

• Colour buttons (Red, Green, Yellow, Blue): These access special functions in some menus.

To automatically tune the programmes on your LG 49LB628U-ZB, navigate to SETTINGS > SETUP > Auto Tuning. This function will automatically find and store available programmes.

• If the Input Source is not connected properly, programme registration may not work.

• Auto Tuning only finds programmes that are currently broadcasting.

• If the Lock System is turned on, a pop-up window will appear asking for a password.

To reduce power consumption on your LG 49LB628U-ZB, navigate to SETTINGS > PICTURE > Energy Saving. This feature adjusts the screen brightness.

• Auto (Depending on model): The TV sensor detects the ambient lighting and automatically adjusts the screen brightness.

• Off: Turns off the Energy Saving mode.

• Minimum / Medium / Maximum: Applies the pre-set Energy Saving mode.

• Screen Off: The screen is turned off and only sound is played. Press any button except the Power button on the remote control to turn the screen back on.

SIMPLINK allows you to control and manage various multimedia devices conveniently via the SIMPLINK menu on your LG 49LB628U-ZB.

1. Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI output terminal using a high-speed HDMI® cable (with CEC feature added).

2. Select INPUT > SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK function descriptions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly.

• Disc playback: Manages the multimedia device with the TV remote control.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When the equipment with SIMPLINK function connected to an HDMI terminal starts to play, the TV will automatically turn on.

• Speaker: Select speaker either on the home theatre unit or the TV.

To safely remove a USB storage device from your LG 49LB628U-ZB, go to Q.MENU > USB Device. Select the USB storage device that you want to remove. When you see a message that the USB device has been removed, you can then physically separate the device from the TV.

Important Warnings for USB use:

• Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

• For external USB HDDs, it is recommended to use devices with a rated voltage of less than 5V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• Data in the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility.

To clean your LG 49LB628U-ZB regularly for the best performance and to extend its lifespan, follow these steps:

1. Make sure to turn the power off and disconnect the power cord and all other cables first.

2. For the screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

3. For the power cord: Remove the accumulated dust or dirt on the power cord regularly.

CAUTION:

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

If you cannot control your LG 49LB628U-ZB with the remote control, try the following solutions:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (positive to positive, negative to negative).

If your LG 49LB628U-ZB has no image and no sound, check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

If your LG 49LB628U-ZB turns off suddenly, consider these possibilities:

• Check the power control settings. The power supply may be interrupted.

• Check if the Automatic Standby / Sleep Timer / Off Time feature is activated in the TIME settings.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

If you see a ‘No signal’ or ‘Invalid Format’ message on your LG 49LB628U-ZB when connected to a PC with an HDMI cable, follow these steps:

• Turn the TV off and on again using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

The following table lists the playable 3D video formats for your LG 49LB628U-ZB, depending on the input source.