LG 49LB551U-ZC (01) PDF Document

To attach the stand to your LG 49LB551U-ZC TV set, you should first place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Then, follow these steps:

1. Assemble the two parts of the stand, the Stand Base (B) and the Stand Base (A).

2. Align the assembled stand with the mounting slots on the bottom of the TV.

3. Insert and tighten the four provided screws (M4 x L14) to secure the stand to the TV.

Connect your LG 49LB551U-ZC to a wall antenna socket using a 75 Ω RF cable. The antenna port is labeled ANTENNA / CABLE IN on the back of the TV.

For best results, please consider the following:

• If you plan to use more than two TVs, use a signal splitter.

• If the image quality is poor, install a signal amplifier correctly to improve the quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• Supported DTV Audio includes MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

You can transmit video and audio signals from an external device to your LG 49LB551U-ZC TV set by connecting the device and the TV with a Euro Scart cable. Ensure any Euro Scart cable you use is signal shielded. The AV1 port will act as a TV Out, and the type of signal it outputs depends on the current input mode:

When connecting various external devices like HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices to your LG 49LB551U-ZC, please follow these guidelines:

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through the recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device, use the cable supplied with it.

• In PC mode, noise may be associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

When you unpack your LG 49LB551U-ZC, check the product box for the following items. If any accessories are missing, contact the local dealer where you purchased the product.

• Remote control and batteries (AAA)

• Owner’s manual

• Power Cord

• Stand Base

• Stand Screws (4EA, M4 x L14 for your model)

Please note:

• Do not use any unapproved items to ensure safety and product life span.

• Any damages or injuries from using unapproved items are not covered by the warranty.

• Some models have a thin film attached to the screen which must not be removed.

Yes, optional extras can be purchased for your LG 49LB551U-ZC. These items can be changed or modified for quality improvement without notification. Contact your dealer to buy them. These devices only work with certain models.

The compatibility is as follows:

The Joystick button, located below the TV screen, allows you to operate basic TV functions. You can simply press it or move it up, down, left, or right.

Basic Functions:

Adjusting the Menu:

When the TV is on, press the joystick button once. You can then adjust Menu items by moving the joystick up, down, left, or right.

Note: Be careful not to press the joystick button first when you want to adjust volume or change programmes, as this will bring up the menu instead.

To prevent your LG 49LB551U-ZC from being scratched or damaged and to ensure safe transportation, please follow this advice:

• Avoid touching the screen at all times.

• It is recommended to move the TV in its original box or packing material.

• Before moving or lifting, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• Do not expose the TV to jolts or excessive vibration during transport.

• Keep the TV upright; never turn it on its side or tilt it.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as it may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure the TV to a wall and prevent it from falling, follow these steps:

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Ensure children do not climb on or hang on the TV.

To wall mount your LG 49LB551U-ZC, use a wall mount bracket that meets the VESA standard. It is recommended that wall mounting be performed by a qualified professional installer. Disconnect power before installing.

The specifications for the 49LB55** model are as follows:

Caution:

• Do not over-tighten the screws as this may cause damage and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Damages from misuse or improper accessories are not covered by the warranty.

Make sure to point the remote control toward the remote control sensor on the TV. To replace batteries, open the battery cover, replace the 1.5V AAA batteries matching the correct polarity, and close the cover. Do not mix old and new batteries.

Here are the functions of the buttons on your remote:

You can access various settings to customize your viewing experience on the LG 49LB551U-ZC.

• Automatically Setting Up Programme: Go to SETTINGS → SETUP → Auto Tuning. This automatically tunes the programmes that are currently broadcasting.

• To adjust picture with Picture Wizard: Go to SETTINGS → PICTURE → Picture Wizard III. This calibrates and adjusts for optimum picture quality.

• To select Picture Mode: Go to SETTINGS → PICTURE → Picture Mode. Select the mode optimized for your viewing environment (e.g., Vivid, Standard, Eco, Cinema/Game, Sports, Expert).

• To use Energy Saving feature: Go to SETTINGS → PICTURE → Energy Saving. This reduces power consumption by adjusting screen brightness. Options include Auto, Off, Minimum, Medium, Maximum, and Screen Off.

• To set sound output: Go to SETTINGS → AUDIO → Sound Out. You can choose between TV Speaker, External Speaker (Optical), or LG Sound Sync (Optical).

• To set a password: Go to SETTINGS → LOCK → Set Password. The initial password is ‘0000’.

• To perform a Factory Reset: Go to SETTINGS → OPTION → Factory Reset. This will delete all stored information and reset TV settings.

When using a USB storage device with your LG 49LB551U-ZC, please be aware of the following:

• If the USB device has a built-in auto recognition program or uses its own driver, it may not work.

• Some USB devices may not work or may work incorrectly.

• Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

• For external USB HDDs, it is recommended to use devices with a rated voltage of less than 5V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• If a USB HDD with a power-saving function does not work properly, turn the power off and on.

• Data on the USB device can be damaged, so be sure to back up important files. Data maintenance is the user’s responsibility.

To remove a USB device, go to Q.MENU → USB Device, select the device, and wait for the confirmation message before physically separating it from the TV.

Clean your TV regularly to keep it in the best condition and extend its lifespan. First, make sure to turn the power off and disconnect the power cord and all other cables.

Screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

Caution:

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen surface with your fingernail or a sharp object.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

Remove the accumulated dust or dirt on the power cord regularly.

If you cannot control the TV with the remote, try the following solutions:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (positive to positive, negative to negative).

If you have no image and no sound, please check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

If your TV turns off suddenly, consider these possibilities:

• Check the power control settings. The power supply may be interrupted.

• Check if the Automatic Standby, Sleep Timer, or Off Time feature is activated in the TIME settings.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

If you encounter a ‘No signal’ or ‘Invalid Format’ error when your PC is connected via HDMI, try these steps:

• Turn the TV off and on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

The specifications for the LG 49LB551U-ZC (model series 49LB55**) are as follows:

Environmental Conditions: