LG 47LM6210-UD (01) PDF Document

To ensure peak performance and avoid dangerous situations with your LG 47LM6210-UD, always comply with the following precautions:

Installation and Environment:

• Do not use this apparatus near water.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not expose the TV to direct air conditioning.

• Do not install this product near flammable objects such as gasoline or candles.

• Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase or in excessively dusty places.

Power and Electrical Safety:

• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician.

• Protect the power cord from being walked on or pinched. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Never touch this apparatus or antenna during a thunder or lightning storm.

• Do not connect too many appliances to the same AC power outlet, as this could result in fire or electric shock.

• Do not stick metal objects into the power cord. Do not touch the end of the power cord while it is plugged in.

• To reduce the risk of fire and electric shock, do not expose this product to rain, moisture, or other liquids. Do not touch the TV with wet hands.

• Ensure you connect the earth ground wire to prevent possible electric shock (for models with a three-prong grounded AC plug).

Usage and Handling:

• Clean only with a dry cloth.

• Only use attachments/accessories specified by the manufacturer.

• Refer all servicing to qualified service personnel.

• Do not allow any objects to fall into the product, and do not drop anything onto the screen.

• Keep packing anti-moisture material or vinyl packing out of the reach of children.

• If you smell smoke or other odors, unplug the power cord and contact an authorized service center.

• Do not press strongly upon the panel with your hand or a sharp object such as a nail or pen.

Moving the TV:

• Make sure the product is turned off, unplugged, and all cables have been removed before moving.

• It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

If a fixed image is displayed on your LG 47LM6210-UD screen for a long period, it can become imprinted and cause a permanent disfigurement known as “image burn” or “burn-in”. This is not covered by the warranty. To prevent image burn:

• Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD TVs).

• If the aspect ratio of the TV is set to 4:3 for a long period, image burn may occur on the letterboxed area of the screen.

When watching 3D content on your LG 47LM6210-UD, please follow these guidelines:

Viewing Environment:

• Viewing Time: Take a 5-15 minute break every hour. Watching for a long period may cause headache, dizziness, fatigue, or eye strain.

• Viewing Distance: Maintain a distance of at least twice the screen diagonal length.

Viewing Age:

• Infants/Children: Viewing 3D content for children under the age of 5 is prohibited. Children under 10 may overreact and require special monitoring.

• Teenagers: Teenagers under 19 may be sensitive to light from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

• Elderly: The elderly may perceive less of a 3D effect. Do not sit closer than the recommended distance.

Health Considerations:

• Some users may experience a seizure or other abnormal symptoms when exposed to flashing lights or patterns from 3D content.

• Do not watch 3D videos if you feel nausea, are pregnant, or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease.

• If you have vision issues like strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may feel fatigue easily. It is advised to take frequent breaks.

When to Stop Watching:

• Stop watching 3D content if you feel fatigue from lack of sleep, overwork, or drinking.

• If symptoms like headache, eyeball pain, dizziness, nausea, blurriness, or discomfort persist, stop watching, rest, and consult your doctor if they continue.

To ensure proper viewing and care for your 3D glasses, follow these cautions:

• Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

• Do not use 3D glasses in place of your normal glasses, sunglasses, or protective goggles.

• Do not keep your 3D glasses in extremely high or low temperatures, as it will cause deformation.

• The 3D glasses are fragile and can be easily scratched. Always use a soft, clean cloth when wiping the lenses. Do not scratch the lenses with sharp objects or clean them with chemicals.

Follow these steps for the initial installation of your LG 47LM6210-UD:

1. Open the package and make sure all the accessories are included.

2. Attach the stand to the TV set.

3. Connect an external device to the TV set.

4. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.

The buttons on your LG 47LM6210-UD are touch-sensitive and can be operated with a simple touch of your finger. The Intelligent sensor adjusts the image quality and brightness based on the surrounding environment.

To prevent your LG 47LM6210-UD from being scratched or damaged and to ensure safe transportation, please follow these instructions:

• Avoid touching the screen at all times, as this may result in damage.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• Keep the TV upright during transport; never turn the TV on its side or tilt it.

• Do not expose the TV to jolts or excessive vibration.

• It is recommended to move the TV in the box or packing material that it originally came in.

To attach the stand to your LG 47LM6210-UD:

1. Place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Assemble the Stand Body and Stand Base.

3. Use the provided screws (M4 x 20) to attach the assembled stand to the back of the TV.

4. Tighten the screws firmly to prevent the TV from tilting forward.

Mounting on a Table:

1. After attaching the stand, lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space between the TV and the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Adjusting the Angle:

• You can swivel the TV 10±2 degrees to the left or right to adjust the angle to suit your view. Be careful not to pinch your fingers when adjusting.

Securing the TV to a Table (Optional, depending on model):

To prevent the TV from tilting or falling, you can secure it to the table.

1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws.

2. Fix the Desk-mount Cables to the table using the Desk-mount Screws.

3. Once fixed, move the table close to the wall.

LG recommends that wall mounting be performed by a qualified professional installer. Make sure to use screws and a wall mount bracket that meet the VESA standard.

Securing the TV to a Wall (to prevent falling):

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If bolts are already in place, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure the rope is horizontal with the flat surface.

Wall Mount Specifications for LG 47LM6210-UD:

CAUTION:

• Disconnect the power first before moving or installing the TV.

• Use an authorized LG wall mount. Do not over-tighten screws, as this can damage the TV and void your warranty.

• Use screws that meet the VESA standard. Any damages from misuse are not covered by the warranty.

To keep the cables tidy behind your LG 47LM6210-UD:

1. Gather and bind the cables together with the provided cable holder.

2. Fix the cable management clip firmly to the TV to hold the cables in place.

CAUTION: Do not move the TV by holding the cable holder, as it may break and cause injury or damage to the TV.

Your LG 47LM6210-UD supports connections for various devices. Here are some common connection methods:

• Antenna or Cable: Connect the coaxial cable (75Ω) to the ANTENNA/CABLE IN port.

• HDMI Devices (HD receiver, DVD, Blu-ray): Use an HDMI cable to connect the device to any of the HDMI IN ports. For audio return through the same cable, use the HDMI IN 1 (ARC) port with a compatible audio device.

• DVI Devices: Use a DVI-to-HDMI cable to connect the device’s DVI OUT to the TV’s HDMI IN 4 (PC) port. For audio, connect a separate audio cable from the device’s AUDIO OUT to the TV’s (RGB/HDMI-PC) AUDIO IN port.

• Component Devices: Use a component video cable (Green, Blue, Red for video) and an audio cable (White, Red) to connect to the corresponding COMPONENT IN and AV IN ports on the TV.

• Composite Devices (VCR, DVD): Use a composite video cable (Yellow for video) and an audio cable (White, Red) to connect to the corresponding AV IN ports on the TV.

• PC Connection: For best image quality, use an HDMI cable (Method A). Alternatively, you can use a DVI-to-HDMI cable (Method B) or an RGB (VGA) cable with a separate audio cable (Method C).

• External Audio System: Use a digital optical audio cable to connect from the TV’s OPTICAL DIGITAL AUDIO OUT port to the audio system’s OPTICAL AUDIO IN port.

• USB Devices: Connect a USB flash drive, external hard drive, or card reader to any of the USB IN ports. To store apps, use the USB IN 3 (USB Apps) port. For a USB Hub, use the USB IN 2 (USB Hub) port.

The Magic Remote Control operates by pairing with your TV.

How to register the Magic Remote Control:

• To register the remote control, press the Wheel (OK) button on the remote control while pointing it at the TV.

How to Re-register after a failure:

1. Press and hold the BACK and HOME buttons together for 5 seconds to reset the remote. The light on the Pointer will blink when the reset is complete.

2. Re-register the remote by pressing the Wheel (OK) button.

Alternatively, to re-register, you can press and hold the BACK button for 5 seconds while pointing it toward the TV.

How to use the Magic Remote Control:

• Move the pointer on the screen by aiming the remote at the TV and moving it left, right, up, or down.

• If the pointer disappears, move the remote slightly to the left or right, and it will reappear automatically.

• If the pointer does not work properly, leave the remote control for 10 seconds, then use it again.

When you turn the TV on for the first time, the Initial Setting screen appears to help you customize the basic settings.

1. Connect the power cord to a power outlet.

2. In Standby mode, press the power button on the remote control to turn the TV on.

3. Follow the on-screen instructions to customize your TV settings. The setup flow is as follows:

• Language Selection: Select a language to display.

• Using the Magic remote control: Sets up the remote control.

• Environment Selection: Select “Home” for the home environment. The “Store” mode is for retail demos.

• Time Zone Setting: Selects the time zone and daylight saving.

• Network Connection: Sets up your network to enable network-related features.

• Auto Tuning: Scans and saves available channels automatically.

• Auto Energy Saving mode Setting: Selects the Auto Energy Saving mode.

• 3D-On-Start Setting: Selects the 3D-On-Start option.

• Setting is completed: Confirms the setting options.

4. When the basic settings are complete, press the Wheel (OK) button.

Here are solutions to some common problems you might encounter with your LG 47LM6210-UD:

The specifications for the LG 47LM6210-UD are as follows. Product specifications may be changed without prior notice due to upgrade of product functions.

To clean your TV regularly for best performance and to extend its lifespan, follow these steps:

1. Make sure to turn the power off and disconnect the power cord and all other cables first.

Screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

Power cord:

• Remove the accumulated dust or dirt on the power cord regularly.

CAUTION:

• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches and image distortions.

• Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

• Do not spray liquid directly onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Please keep these safety tips in mind to ensure a safe home entertainment experience:

• Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display. Flat panel displays are not always supported on the proper stands or installed according to recommendations.

• Displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.

• Do not allow children to climb on or play with furniture and television sets.

• Do not place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Route all cords and cables connected to the display so that they cannot be pulled or grabbed by curious children.

If You Decide to Wall Mount Your Display:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

• Make sure that the wall where you are mounting the display is appropriate. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.