LG 43UK6300BUB (01) PDF Document

Please follow these safety instructions when using your LG 43UK6300BUB TV:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

To ensure safety and prevent product damage, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity such as a bathroom.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Failure to do so may result in fire, electric shock, combustion/explosion, malfunction or product deformation.

When moving or lifting the TV, follow these guidelines to prevent scratches or damage and ensure safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grille area.

• Use at least two people to move a large TV.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it towards the left or right.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may damage it.

• Do not place the product on the floor with its front facing down without padding.

For proper cleaning of your LG 43UK6300BUB TV:

1. Unplug the power cord.

2. Wipe gently with a soft, dry cloth.

3. Do not spray water or other liquids directly on the TV.

4. Do not clean your TV with chemicals including glass cleaner, air freshener, insecticide, lubricants, wax, abrasive, thinner, benzene, alcohol, etc., as these can damage the product and/or its panel.

When cleaning the panel, be careful not to allow any liquid or foreign objects to enter the gap between the sides of the panel and the guide panel.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

When attaching the stand, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

The VESA specifications for wall mounting your LG 43UK6300BUB TV are as follows:

Always use screws and a wall mount bracket that meet the VESA standard. It is recommended to use an LG brand wall mount. When using a non-LG wall mount, ensure the device is adequately secured to the wall with enough space to allow connectivity to external devices.

You can operate the TV’s basic functions using the single button on the unit. When the TV is on, press the button once to access the menu. You can adjust the menu items by pressing the button.

When the control menu is open, you can press the button to cycle through the options:

• Power Off

• Changes the input source

• Scrolls through the saved channels

• Adjusts the volume level

To register the Magic Remote:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register, try again after turning the TV off and back on.

To deregister the Magic Remote:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

If you cannot control the TV with the remote control, try the following steps:

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the TV and the remote control.

• Replace the batteries with new fresh ones.

If there is no image display and no sound is produced, follow these troubleshooting steps:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

If your TV turns off suddenly, check the following:

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

The symbols on your TV indicate the following:

Here are the key specifications for the LG 43UK6300BUB:

Broadcasting Specifications

Wireless module (LGSBWAC72) Specifications

Environment condition

You can control your LG 43UK6300BUB TV’s functions externally by connecting a computer or an A/V control system to the USB to Serial converter/RS-232C input jack. The communication parameters should be set as follows:

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

You must set a “Set ID” number in the TV’s menu (General → About this TV or OPTION → SET ID) from 1 to 99. The transmission protocol is: [Command1][Command2][ ][Set ID][ ][Data][Cr].

The following table lists the commands for controlling your TV via RS-232C.

Note: During media playback, all commands except Power (ka) and Key (mc) are not executed. With RS232C cable, the “ka command” can communicate in power-on or power-off status. With a USB-to-Serial converter cable, the command only works if the TV is on.