LG 43SL5PE (02) PDF Document

The standard items included with the LG 43SL5PE are:

• The Digital Signage Monitor

• Remote Control

• AAA Batteries

• A CD

• Various cables for connectivity, such as a power cord and RS-232C cable.

Please note that the included items can vary depending on the country of purchase.

To connect the power cord to your LG 43SL5PE, please follow these steps:

1. First, connect one end of the power cord securely into the power input port on the back of the monitor.

2. Then, plug the other end of the power cord into a grounded wall outlet.

To install or replace the batteries in your remote control, follow these steps:

1. Slide the battery cover on the back of the remote to open the compartment.

2. Insert two AAA batteries, making sure to match the + and – ends of the batteries with the labels inside the compartment.

3. Slide the battery cover back into place until it clicks shut.

You can turn on your LG 43SL5PE in two ways:

• Using the monitor’s power button: Press the power button located on the bottom edge of the monitor.

• Using the remote control: Aim the remote at the sensor on the monitor and press the power button.

The LG 43SL5PE provides a variety of ports for connecting external devices. These include:

• HDMI IN (1 and 2)

• HDMI OUT

• DVI-D IN

• DVI OUT

• RGB IN

• RGB OUT

• AUDIO IN

• AUDIO OUT

• LAN (Network)

• USB

• RS-232C IN

• RS-232C OUT

• EXT IR IN

• IO OUT

• OPS DC Power