Free English LG 43SH7PE (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 43SH7PE (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What items are included with the LG 43SH7PE?
The accessories included with your LG 43SH7PE may vary depending on the country of purchase. The typical items included are:
– Remote Control
– AAA Batteries
– Power Cord
– Software CD
– RS-232C Cable
– DVI Cable
How do I install the batteries in the remote control for my LG 43SH7PE?
Follow these steps to install the batteries in the remote control:
1. Open the battery cover on the back of the remote control by sliding it off.
2. Insert the batteries, making sure to match the positive (+) and negative (-) ends with the labels inside the compartment.
3. Close the battery cover by sliding it back into place until it clicks.
How do I connect the power cord to my LG 43SH7PE?
Please follow these steps to connect the power cord:
1. Securely plug the power cord into the power input port on the back of the monitor.
2. Plug the other end of the power cord into a wall outlet.
How do I turn on the LG 43SH7PE?
You can turn on your LG 43SH7PE in one of two ways:
– Press the power button located on the monitor itself.
– Press the power button on the remote control while aiming it at the monitor’s sensor.
How can I connect external devices to my LG 43SH7PE?
Your LG 43SH7PE is equipped with several ports for connecting external devices:
– HDMI IN 1 / HDMI IN 2: Use an HDMI cable to connect devices such as computers, set-top boxes, or gaming consoles.
– DVI-D IN: Use a DVI-D cable to connect a PC or other DVI-compatible devices.
– RGB IN: Use an RGB (VGA) cable to connect the RGB output of a computer.
– AUDIO IN: When using the DVI-D or RGB inputs for video, connect the audio source using a 3.5mm audio cable to this port.
– RS-232C IN/OUT: Connect to a PC for external control of the monitor. The OUT port allows for daisy-chaining multiple displays.
– LAN: Connect to your network using an Ethernet cable for network features.
– USB: Connect a USB device. This port provides 5 V at 1.0 A.
– EXT IR IN: Connect an external IR receiver for remote control functionality.
– AUDIO OUT: Connect to external speakers or an audio system using a 3.5mm audio cable.
– HDMI OUT: Connect another display to output the video and audio signal from an HDMI input source.
What is the OPS DC Power specification for the LG 43SH7PE?
The OPS DC Power specification for the LG 43SH7PE is 13.2 V at 2.65 A / 2.65 A (or 13.2 V at 5.3 A).
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD LG 43SH7PE (02) PDF DOCUMENT