LG 39LB561U-ZC (01) PDF Document

To attach the stand to your LG 39LB561U-ZC, place the screen facing down on a cushioned table or flat surface to protect it from scratches. Then, follow the assembly instructions provided in the manual that correspond to your specific model type (e.g., LB55**, LB56**-ZE/ZC, etc.). The process generally involves attaching the Stand Base parts (A and B) and securing them with the provided screws (e.g., M4 x L14 or M4 x L20).

Connect your LG 39LB561U-ZC to a wall antenna socket using an RF cable (75 Ω).

Notes:

• Use a signal splitter if you need to connect more than 2 TVs.

• If the image quality is poor, install a signal amplifier to improve it.

• If the image quality is poor with an antenna connected, try realigning the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• Supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

For satellite-enabled models, connect the LG 39LB561U-ZC to a satellite dish socket using a satellite RF cable (75 Ω) into the “LNB Satellite IN” port.

The Euro Scart connection on your LG 39LB561U-ZC transmits video and audio signals from an external device to the TV. The AV1 (TV Out) port can output either Analogue or Digital TV signals depending on the input source.

Here is a summary of the output types based on the current input mode:

Note: Any Euro Scart cable used must be signal shielded. For 3D models, only 2D signals can be output through the SCART cable when watching digital TV in 3D mode.

You can connect various external devices like HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices to your LG 39LB561U-ZC.

• For the best picture and audio quality, it is recommended to use an HDMI cable to connect the external device to the TV.

• Connect external devices regardless of the port order on the TV.

• If recording a TV programme on a DVD recorder or VCR, ensure the TV signal input cable is connected to the TV through the recorder.

• When connecting a gaming device, use the cable supplied with it.

• In PC mode, if noise is present, try changing the PC output to another resolution, changing the refresh rate, or adjusting the brightness and contrast in the TV’s PICTURE menu until the picture is clear.

The Joystick button, located below the TV screen, allows you to operate basic TV functions by pressing or moving it up, down, left, or right.

Basic Functions:

Adjusting the Menu:

When the TV is on, press the joystick button once to bring up the menu. Move the joystick to adjust the menu items.

To prevent scratches or damage, please follow this advice when moving your LG 39LB561U-ZC:

• Always avoid touching the screen.

• It is recommended to move the TV in its original box or packing material.

• Before moving, disconnect the power cord and all other cables.

• When holding the TV, the screen should face away from you.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting the TV, keep it upright. Do not turn it on its side or tilt it.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm of space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure the TV to a wall (this feature may not be available on all models):

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure the rope is kept horizontal with the flat surface.

Caution: Ensure children do not climb on or hang on the TV. Brackets, bolts, and ropes are not provided.

To wall mount your LG 39LB561U-ZC, use screws and a wall mount bracket that meet the VESA standard. LG recommends that wall mounting be performed by a qualified professional installer.

Wall Mounting Bracket Specifications:

Caution: Disconnect power before moving or installing. Do not overtighten the screws. Use screws and wall mounts that meet the VESA standard.

Point the remote control at the sensor on the TV. To replace batteries, open the battery cover, replace the (1.5 V AAA) batteries matching the (+) and (-) ends, and close the cover. Do not mix old and new batteries.

Key Remote Control Functions (may vary by model):

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV, and DTV programmes.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/- buttons: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• GUIDE: Shows the programme guide.

• MUTE: Mutes all sounds.

• P buttons: Scrolls through the saved programmes.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AD: Enables audio descriptions.

• REC/●: Starts recording (on supported models).

• 3D button: Used for viewing 3D video (on 3D models).

To automatically tune programmes, go to SETTINGS → SETUP → Auto Tuning. This function will automatically find and store programmes that are currently broadcasting. Note that if the input source is not connected properly, this may not work. If the Lock System is on, you will be prompted for a password.

Navigate to SETTINGS → PICTURE → Picture Wizard III. This feature allows you to calibrate and adjust for optimum picture quality using the remote control without needing expensive pattern devices.

Go to SETTINGS → PICTURE → Picture Mode to select a picture mode optimized for your viewing environment or programme.

• Vivid: Heightens contrast, brightness, and sharpness.

• Standard: Displays images in standard levels of contrast, brightness, and sharpness.

• Eco/APS: Reduces power consumption by changing TV settings.

• Cinema/Game: Displays the optimum picture for movies or games.

• Sports: Optimizes the image for high-action sports by emphasizing primary colours.

• Expert 1, 2: A menu for experts and amateurs to adjust picture quality for the best viewing. This is for ISF-certified professionals.

SIMPLINK allows you to control various multimedia devices with your TV remote via the SIMPLINK menu.

1. Connect the TV’s HDMI IN terminal to the SIMPLINK device’s HDMI output terminal with a high-speed HDMI® cable (with CEC feature).

2. Select INPUT(OPTION) → SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK Functions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device to control from the TV screen.

• Disc playback: Manages the multimedia device with the TV remote.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When the connected equipment starts to play, the TV will automatically turn on.

• Use only USB storage devices formatted with the FAT32 or NTFS File System.

• For external USB HDDs, use devices with a rated voltage of less than 5V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• Data on the USB storage device can be damaged, so back up important files. Data maintenance is the user’s responsibility.

• To remove a USB device, select it from Q.MENU → USB Device, and wait for the confirmation message before physically separating it from the TV.

Clean your TV regularly to keep it in the best condition. First, make sure to turn the power off and disconnect all cables.

• Screen, frame, cabinet, and stand: To remove dust or light dirt, wipe the surface with a dry, clean, soft cloth. For major dirt, wipe with a soft cloth dampened in clean water or a diluted mild detergent, then immediately wipe with a dry cloth.

• Power cord: Remove any accumulated dust or dirt from the power cord regularly.

Caution:

• Avoid touching the screen at all times.

• Do not push, rub, or hit the screen with your fingernail or a sharp object.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface.

Here are some common troubleshooting steps for your LG 39LB561U-ZC:

The following resolutions and frequencies are supported when using HDMI IN 1 for PC mode on your LG 39LB561U-ZC.