LG 39LB561B-ZC (01) PDF Document

The method for attaching the stand to your LG 39LB561B-ZC TV varies slightly depending on your specific model series (e.g., LB55**, LB56**-ZE/ZC vs. LB56**-ZT/ZQ). However, the general process is as follows:

1. Place the screen facing down on a cushioned table or flat surface to protect it from scratches.

2. Assemble the stand parts (A Stand Base and B Stand Base) as shown in the manual diagram for your model.

3. Attach the assembled stand to the TV set.

4. Secure the stand to the TV using the provided screws. Depending on the model, you will use either M4 x L14 or M4 x L20 screws. Use the 4 screws (4EA) to fasten the stand securely.

CAUTION: Always place the screen facing down on a cushioned surface during stand installation to prevent scratches.

Connect your LG 39LB561B-ZC TV to a wall antenna socket using an RF cable (75 Ω).

Notes:

– Use a signal splitter if you need to connect more than 2 TVs.

– If the image quality is poor, install a signal amplifier to improve it.

– If the image quality is poor with an antenna connected, try realigning the antenna in the correct direction.

– An antenna cable and converter are not supplied.

– Supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

For satellite models of the LG 39LB561B-ZC, connect the TV to a satellite dish to a satellite socket using a satellite RF cable (75 Ω). Plug the cable into the “LNB Satellite IN” port on the back of the TV.

The Euro Scart connection on your LG 39LB561B-ZC transmits video and audio signals from an external device to the TV. Connect the external device and the TV with a Euro Scart cable as shown in the manual. Any Euro Scart cable used must be signal shielded.

The AV1 (TV Out) port outputs different signals depending on the current input mode:

Note for 3D models: When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable.

To prevent your LG 39LB561B-ZC from being scratched or damaged and to ensure safe transportation, please follow this advice:

– Before moving or lifting the TV, disconnect the power cord and all cables.

– It is recommended to move the TV in the box or packing material it originally came in.

– When holding the TV, the screen should face away from you to avoid damage.

– Avoid touching the screen at all times, as this may result in damage.

– Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

– When transporting a large TV, there should be at least 2 people.

– Keep the TV upright when transporting it; never turn it on its side or tilt it left or right.

– Do not expose the TV to jolts or excessive vibration during transport.

– Do not apply excessive pressure that could cause flexing or bending of the frame chassis, as this may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

CAUTION: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure the TV to a wall for stability (feature not available on all models):

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note: Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided and can be obtained from your local dealer.

LG recommends that wall mounting be performed by a qualified professional installer. To mount your LG 39LB561B-ZC, attach an optional wall mount bracket to the rear of the TV and install it on a solid wall perpendicular to the floor.

Cautions:

– Disconnect the power first before moving or installing the TV.

– If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount.

– Do not over-tighten the screws, as this may cause damage and void your warranty.

– Use screws and wall mounts that meet the VESA standard. Any damages from misuse are not covered by the warranty.

Wall Mounting Bracket Specifications (Separate Purchase):

Please refer to the manual supplied with the wall mount for more information and to ensure you use the proper length of screws.

You can operate the TV functions by pressing or moving the joystick button located below the TV screen.

Basic Functions:

– Power On: When the TV is off, place your finger on the joystick button, press it once, and release it.

– Power Off: When the TV is on, press and hold the joystick button for a few seconds and release. (If the Menu is on screen, pressing and holding the button will exit the Menu.)

– Volume Control: Move the joystick button left or right to adjust the volume.

– Programmes Control: Move the joystick button up or down to scroll through the saved programmes.

Note: When moving the joystick, be careful not to press it first, as that will prevent you from adjusting volume and programmes.

Adjusting the Menu:

When the TV is on, press the joystick button once to bring up the menu. You can then adjust menu items by moving the joystick up, down, left, or right.

– TV off: Turns the power off.

– Settings: Accesses the main menu.

– Close: Clears on-screen displays and returns to TV viewing.

– Input List: Changes the input source.

The remote control for the LG 39LB561B-ZC has the following functions:

To automatically tune the programmes on your LG 39LB561B-ZC, navigate to SETTINGS > SETUP > Auto Tuning. This function will automatically find and save programmes that are currently broadcasting. Note that if the input source is not connected properly, programme registration may not work. If the Lock System is turned on, a pop-up window will appear asking for a password.

You can calibrate and adjust for optimum picture quality using the Picture Wizard III feature. Navigate to SETTINGS > PICTURE > Picture Wizard III. This tool allows you to adjust the picture using the remote control without needing expensive pattern devices or specialist help.

To select a picture mode optimized for your viewing environment or programme, go to SETTINGS > PICTURE > Picture Mode. The available options are:

– Vivid: Heightens contrast, brightness, and sharpness for vivid images.

– Standard: Displays images in standard levels of contrast, brightness, and sharpness.

– Eco/APS: The Energy Saver feature changes settings to reduce power consumption.

– Cinema/Game: Displays the optimum picture for movies or games.

– Sports: Optimizes the image for high and dynamic actions by emphasizing primary colours like white, grass, or sky blue.

– Expert 1, 2: A menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This is the adjustment menu for ISF-certified picture tuning professionals.

Note: The available range of picture modes may differ depending on the input signal.

To reduce power consumption by adjusting screen brightness, navigate to SETTINGS > PICTURE > Energy Saving. The options are:

– Auto: The TV sensor detects ambient lighting and automatically adjusts screen brightness (depending on model).

– Off: Turns off the Energy Saving mode.

– Minimum / Medium / Maximum: Applies the pre-set Energy Saving mode.

– Screen Off: The screen is turned off, and only sound is played. Press any button except the Power button on the remote to turn the screen back on.

You can manage the audio output settings on your LG 39LB561B-ZC through the SETTINGS > AUDIO > Sound Out menu.

– To use TV speaker: Select TV Speaker. Sound is output through the TV’s speakers.

– To use External Speaker (Optical): Select External Speaker (Optical). Sound is output through the speaker connected to the optical port. SimpLink is supported.

– To use Headphone: Select Headphone. Sound is output through the headphone port.

– To use LG Sound Sync (Optical): Select LG Sound Sync (Optical). Connect an LG audio device with the appropriate logo to the optical digital audio output port for rich, powerful sound.

Digital Sound Out Settings:

When using an external speaker, you can set up the Digital Sound Out format. The output depends on the audio input:

If video and audio are not matched, you can synchronize them directly. Go to SETTINGS > AUDIO > AV Sync. Adjust. If you set AV Sync. Adjust to ON, you can adjust the sound output (from TV speakers or SPDIF) to match the screen image.

SIMPLINK allows you to control and manage various multimedia devices via the SIMPLINK menu. To use this feature, you need a high-speed HDMI® cable with CEC (Consumer Electronics Control) feature added.

Setup Steps:

1. Connect the TV’s HDMI IN terminal to the SIMPLINK device’s HDMI output terminal using an HDMI cable.

2. Select INPUT(OPTION) > SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK Functions:

– Direct Play: Plays the multimedia device on the TV instantly.

– Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly.

– Disc playback: Manages the multimedia device with the TV remote control.

– Power off all devices: When you power off the TV, all connected devices are turned off.

– Sync Power on: When equipment with SIMPLINK starts to play, the TV will automatically turn on.

– Speaker: Selects the speaker either on the home theatre unit or the TV.

To set or change the TV password, go to SETTINGS > LOCK > Set Password. The initial password is set to ‘0000’.

To delete all stored information and reset the TV settings, navigate to SETTINGS > OPTION > Factory Reset. The TV will turn itself off and back on, and all settings will be reset. Do not turn off the power during this initialization process.

When using a USB storage device with your LG 39LB561B-ZC, please be aware of the following:

– If the USB device has a built-in auto recognition program or uses its own driver, it may not work.

– Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

– For external USB HDDs, it is recommended to use devices with a rated voltage of less than 5V and a rated current of less than 500 mA.

– It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

– If a USB HDD with a power-saving function does not work properly, turn the power off and on.

– Data on the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility.

To remove a USB device, go to Q.MENU > USB Device and select the device you want to remove. Once you see the removal message, you can safely separate the device from the TV.

Supported Video Formats (Maximum: 1920 x 1080 @ 30p):

– .asf, .wmv, .divx, .avi, .ts, .trp, .tp, .mts, .m2ts, .vob, .mp4, .m4v, .mov, .mkv, motion JPEG, .mpg, .mpeg, .mpe, .dat, .flv, .3gp, .3gp2

Supported Audio Formats:

– File type: mp3 (Bit rate: 32 Kbps – 320 Kbps, Sample freq.: 16 kHz – 48 kHz)

– File Type: AAC (Bit rate: Free Format, Sample freq.: 8 kHz ~ 48 kHz)

– File Type: M4A (Bit rate: Free Format, Sample freq.: 8 kHz ~ 48 kHz)

– File Type: WMA (Bit rate: 128 Kbps ~ 320 Kbps, Sample freq.: 8 kHz ~ 48 kHz)

– File Type: OGG (Bit rate: Free Format, Sample freq.: 8kHz ~ 48 kHz)

Supported Photo Formats:

– Category: 2D (jpeg, jpg, jpe). Max size: 15360(W) x 8640(H) for Normal Type, 1920(W) x 1440(H) for Progressive Type.

– Category: BMP. Max size: 9600 x 6400.

– Category: PNG. Max size: 9600 x 6400 (Non-Interlace).

External supported subtitle formats: *.srt, *.smi, *.sub, *.ass/*.ssa, *.txt, *.psb.

Clean your TV regularly to keep the best performance and extend its lifespan. First, make sure to turn the power off and disconnect the power cord and all other cables.

Screen, frame, cabinet and stand:

– To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

– To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

Cautions:

– Avoid touching the screen at all times.

– Do not push, rub, or hit the screen surface with your fingernail or a sharp object.

– Do not use any chemicals as this may damage the product.

– Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

Remove the accumulated dust or dirt on the power cord regularly.

If you cannot control your LG 39LB561B-ZC with the remote, try the following steps:

– Check the remote control sensor on the product and try again.

– Check if there is any obstacle between the product and the remote control.

– Check if the batteries are still working and are properly installed (positive to positive, negative to negative).

If there is no image display and no sound is produced, please check the following:

– Check if the product is turned on.

– Check if the power cord is connected to a wall outlet.

– Check if there is a problem in the wall outlet by connecting other products to it.

If your TV turns off suddenly, consider these possibilities:

– Check the power control settings. The power supply may have been interrupted.

– Check if the Automatic Standby, Sleep Timer, or Off Time feature is activated in the TIME settings.

– If there is no signal while the TV is on, it will automatically turn off after 15 minutes of inactivity.

If you see a ‘No signal’ or ‘Invalid Format’ message when connecting your PC to the TV with an HDMI cable, follow these steps:

– Turn the TV off and on again using the remote control.

– Reconnect the HDMI cable.

– Restart the PC with the TV already on.

When using the HDMI IN 1 port for PC mode, the LG 39LB561B-ZC supports the following resolutions: