LG 32LB565V-ZQ (01) PDF Document

To attach the stand to your LG 32LB565V-ZQ TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. The assembly process varies slightly depending on your specific model series.

For models LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB:

1. Attach the A Stand Base to the B Stand Base.

2. Secure the stand assembly to the bottom of the TV set using the provided screws. You will need 4 screws of type M4 x L14, or M4 x L20 for 32-inch models.

For models LB56**-ZT / ZQ, LB62**-ZE:

1. Attach the A Stand Base to the B Stand Base.

2. Secure the stand assembly to the bottom of the TV set using the provided screws. You will need 4 screws of type M4 x L14, or M4 x L20 for 32-inch models.

Antenna Connection:

Connect your LG 32LB565V-ZQ to a wall antenna socket using an RF cable (75 Ω).

• If you want to use more than 2 TVs, use a signal splitter.

• If the image quality is poor, install a signal amplifier properly to improve it.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• The supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

Satellite Dish Connection (Only for satellite models):

Connect your LG 32LB565V-ZQ to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).

To transmit video and audio signals from an external device, connect the device to your LG 32LB565V-ZQ using a Euro Scart cable. Ensure any Euro Scart cable used is signal shielded. The TV Out function (AV1) will output different signal types depending on the current input mode:

Note: For 3D models, when watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable.

You can connect various external devices such as HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices to your LG 32LB565V-ZQ.

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device, use the cable supplied with the gaming device.

• In PC mode, if noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

The Joystick button is located below the TV screen and allows you to operate basic TV functions by pressing or moving it up, down, left, or right.

Basic Functions:

• Power On: When the TV is off, press the joystick button once and release it.

• Power Off: When the TV is on, press and hold the joystick button for a few seconds and release it.

• Volume Control: Move the joystick button left or right to adjust the volume.

• Programmes Control: Move the joystick button up or down to scroll through saved programmes.

Adjusting the Menu:

When the TV is on, press the joystick button once to open the menu. You can then move the joystick to select different options:

To prevent your LG 32LB565V-ZQ from being scratched or damaged and for safe transportation, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in the box or packing material it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• Do not expose the TV to jolts or excessive vibration during transport.

• Keep the TV upright; never turn it on its side or tilt it left or right.

• Do not apply excessive pressure to the frame chassis, as it may damage the screen.

Mounting on a table:

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Securing the TV to a wall (This feature is not available for all models):

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Ensure that children do not climb on or hang on the TV. Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts, and ropes are not provided.

To wall mount your LG 32LB565V-ZQ, use a wall mount bracket that meets the VESA standard. It is recommended that wall mounting be performed by a qualified professional installer. Disconnect power before installing. The VESA standards vary by model size:

Note: Use screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV and DTV programme.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• AD: By pressing the AD button, audio descriptions function will be enabled.

• RATIO: Resizes an image.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/-: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• GUIDE: Shows programme guide.

• MUTE: Mutes all sounds.

• P (up/down): Scrolls through the saved programmes.

• PAGE (up/down): Moves to the previous or next screen.

• Teletext buttons (TEXT / T.OPT): Used for teletext.

• INFO: Views the information of the current programme and screen.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AV MODE: Selects an AV mode.

• REC: Starts to record and displays record menu (Only Time MachineReady supported model).

• Control buttons (Play, Pause, etc.): Controls MY MEDIA menus, Time MachineReady control or SIMPLINK compatible devices.

• Colour buttons (Red, Green, Yellow, Blue): Access special functions in some menus.

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV and DTV programme.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• GUIDE: Shows programme guide.

• AV MODE: Selects an AV mode.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/-: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• 3D: Used for viewing 3D video.

• MUTE: Mutes all sounds.

• P (up/down): Scrolls through the saved programmes.

• PAGE (up/down): Moves to the previous or next screen.

• Teletext buttons (TEXT / T.OPT): Used for teletext.

• INFO: Views the information of the current programme and screen.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AD: By pressing the AD button, audio descriptions function will be enabled.

• REC: Starts to record and displays record menu (Only Time MachineReady supported model).

• Control buttons (Play, Pause, etc.): Controls MY MEDIA menus, Time MachineReady control or SIMPLINK compatible devices.

• Colour buttons (Red, Green, Yellow, Blue): Access special functions in some menus.

You can adjust various picture settings on your LG 32LB565V-ZQ through the settings menu.

• Picture Wizard III: (SETTINGS > PICTURE > Picture Wizard III) Calibrates and adjusts for optimum picture quality using the remote control without expensive pattern devices.

• Picture Mode: (SETTINGS > PICTURE > Picture Mode) Select a preset picture mode optimized for your viewing environment.

• Vivid: Heightens contrast, brightness, and sharpness.

• Standard: Displays images in standard levels.

• Eco/APS: Reduces power consumption.

• Cinema/Game: Displays the optimum picture for movies or games.

• Sports: Optimizes the image for high and dynamic actions.

• Expert 1, 2: Menu for experts and amateurs to enjoy the best TV viewing (ISF-certified).

• Advanced Control / Expert Control: (SETTINGS > PICTURE > Picture Mode > Advanced Control / Expert Control) Calibrates the screen for each picture mode with detailed settings like Dynamic Contrast, Dynamic Colour, Skin Colour, Gamma, Colour Gamut, and more.

You can manage the sound output from your LG 32LB565V-ZQ through the audio settings.

• TV Speaker: (SETTINGS > AUDIO > Sound Out > TV Speaker) Sound is output through the TV’s internal speakers.

• External Speaker (Optical): (SETTINGS > AUDIO > Sound Out > External Speaker (Optical)) Sound is output through a speaker connected to the optical port. SimpLink is supported.

• LG Sound Sync (Optical): (SETTINGS > AUDIO > Sound Out > LG Sound Sync (Optical)) Connect an LG audio device to the optical digital audio output port to enjoy rich, powerful sound.

• Headphone: (SETTINGS > AUDIO > Sound Out > Headphone) Sound is output through the headphone port.

• AV Sync. Adjust: (SETTINGS > AUDIO > AV Sync. Adjust) Synchronizes video and audio directly if they do not match. You can adjust the sound output (TV speakers or SPDIF) to the screen image.

The Digital Sound Out settings determine the type of audio signal sent through the optical port:

• To use SIMPLINK: SIMPLINK allows you to control various multimedia devices with your TV remote. Connect the device via HDMI, then go to INPUT(OPTION) > SIMPLINK to turn the function on and select the device to control. This requires a high-speed HDMI cable with CEC feature.

• To set password: Go to SETTINGS > LOCK > Set Password. The initial password is ‘0000’.

• To perform a Factory Reset: Go to SETTINGS > OPTION > Factory Reset. This will delete all stored information and reset all TV settings. The TV will turn itself off and back on. Do not turn off the power during initialization.

When using a USB device with your LG 32LB565V-ZQ, please observe the following warnings:

• Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

• For external USB HDDs, use devices with a rated voltage of less than 5V and a rated current of less than 500mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• If a USB HDD with a power-saving function does not work properly, turn the power off and on.

• Data on the USB storage device can be damaged, so be sure to back up important files. Data maintenance is the user’s responsibility.

To remove a USB device, go to Q.MENU > USB Device and select the device you want to remove. Once the message appears that the device has been removed, you can safely separate it from the TV.

Your LG 32LB565V-ZQ supports various file formats for playback via USB.

Supported Video Formats (Max: 1920 x 1080 @ 30p):

• .asf, .wmv, .divx, .avi, .ts, .trp, .tp, .mts, .m2ts, .vob, .mp4, .m4v, .mov, .mkv, motion JPEG, .mpg, .mpeg, .mpe, .dat, .flv, .3gp, .3gp2

Supported Audio Formats:

• File type: mp3 (Bit rate: 32 Kbps – 320 Kbps, Sample freq: 16 kHz – 48 kHz)

• File type: AAC (Bit rate: Free Format, Sample freq: 8 kHz – 48 kHz)

• File type: M4A (Bit rate: Free Format, Sample freq: 8 kHz – 48 kHz)

• File type: WMA (Bit rate: 128 Kbps – 320 Kbps, Sample freq: 8 kHz – 48 kHz)

• File type: OGG (Bit rate: Free Format, Sample freq: 8 kHz – 48 kHz)

Supported Photo Formats:

• Category: 2D (jpeg, jpg, jpe) – Min size: 64×64, Max size: Normal 15360×8640, Progressive 1920×1440

• Category: BMP – Min size: 64×64, Max size: 9600×6400

• Category: PNG – Min size: 64×64, Max size: Interlace 1200×800, Non-Interlace 9600×6400

To keep your LG 32LB565V-ZQ in the best condition, clean it regularly. First, make sure to turn the power off and disconnect all cables.

Screen, frame, cabinet and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen surface with your fingernail or a sharp object.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface.

Power cord:

Remove the accumulated dust or dirt on the power cord regularly.