LG 32LB561V-ZC (01) PDF Document

To attach the stand to your LG 32LB561V-ZC TV, please follow these steps. Note that the image shown in the manual may differ from your TV.

1. Place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Assemble the stand parts. For the LB56**-ZE/ZC models like yours, you will have a Stand Base (Part A) and a Stand Base (Part B).

3. Align and attach the stand to the TV set.

4. Secure the stand to the TV using the provided screws. For the 32-inch LB56**-ZE/ZC models, you should use four M4 x L20 screws.

Connect the LG 32LB561V-ZC TV to a wall antenna socket using an RF cable (75 Ω) into the “ANTENNA / CABLE IN” port.

Please note the following:

• Use a signal splitter if you want to connect more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve it.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied with the TV.

• Supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

To connect your LG 32LB561V-ZC TV to a satellite dish (on applicable models), use a satellite RF cable (75 Ω) to connect the satellite dish to the “LNB Satellite IN” socket on the TV.

The Euro Scart connection transmits video and audio signals from an external device to your LG 32LB561V-ZC TV. Connect the external device and the TV with a Euro scart cable. Ensure that any Euro scart cable used is signal shielded.

The output signal type from the AV1 (TV Out) port depends on the current input mode:

You can connect various external devices to your LG 32LB561V-ZC, such as HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, and gaming devices. Switch input modes on your TV to select the desired external device.

General Guidelines:

• The external device connection may differ from the model diagrams.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, ensure the TV signal input cable is connected to the TV through the DVD recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• When connecting a gaming device, use the cable supplied with it.

• In PC mode, there may be noise associated with resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

You can operate your LG 32LB561V-ZC TV functions by pressing or moving the joystick button located below the TV screen.

Power On: When the TV is off, place your finger on the joystick button, press it once, and release it.

Power Off: When the TV is on, place your finger on the joystick button, press it for a few seconds, and release it. (If the Menu is on the screen, pressing and holding the button will exit the Menu).

Volume Control: Place your finger over the joystick button and move it left or right to adjust the volume.

Programmes Control: Place your finger over the joystick button and move it up or down to scroll through the saved programmes.

Note: When you move your finger over the joystick button up, down, left, or right, be careful not to press the joystick button itself. If you press the joystick button first, you cannot adjust the volume level and saved programmes.

When the LG 32LB561V-ZC TV is turned on, press the joystick button once. You can then adjust the menu items by moving the joystick button up, down, left, or right.

• TV off: Turns the power off.

• Settings: Accesses the main menu.

• Close: Clears on-screen displays and returns to TV viewing.

• Input List: Changes the input source.

To prevent your LG 32LB561V-ZC TV from being scratched or damaged and to ensure safe transportation, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in its original box or packing material.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, at least 2 people should be involved.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it to the left or right.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum space of 10 cm from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Caution: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

This feature is not available for all models. If your model supports it, follow these steps:

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Caution: Make sure that children do not climb on or hang on the TV.

To mount your LG 32LB561V-ZC TV, use a wall mount bracket that meets the VESA standard. LG recommends that wall mounting be performed by a qualified professional installer.

Cautions:

• Disconnect the power first before moving or installing the TV.

• If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount.

• Do not over-tighten the screws as this may cause damage and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Damages or injuries from misuse are not covered by the warranty.

Wall Mounting Bracket Specifications:

Point the remote control toward the remote control sensor on the TV. Here are the functions of the main buttons (for LB55**/LB56** models):

• POWER: Turns the TV on or off.

• TV/RAD: Selects Radio, TV, and DTV programme.

• SUBTITLE: Recalls your preferred subtitle in digital mode.

• AD: By pressing the AD button, the audio descriptions function will be enabled.

• RATIO: Resizes an image.

• INPUT: Changes the input source.

• Number buttons: Enters numbers.

• LIST: Accesses the saved programme list.

• Q.VIEW: Returns to the previously viewed programme.

• +/- buttons: Adjusts the volume level.

• FAV: Accesses your favourite programme list.

• GUIDE: Shows the programme guide.

• MUTE: Mutes all sounds.

• P buttons: Scrolls through the saved programmes.

• Teletext buttons (TEXT / T.OPT): Used for teletext.

• INFO: Views the information of the current programme and screen.

• SETTINGS: Accesses the main menus.

• Q.MENU: Accesses the Quick menus.

• Navigation buttons (up/down/left/right): Scrolls through menus or options.

• OK: Selects menus or options and confirms your input.

• BACK: Returns to the previous level.

• EXIT: Clears on-screen displays and returns to TV viewing.

• AV MODE: Selects an AV mode.

• Control buttons (Play, Pause, etc.): Controls MY MEDIA menus, Time MachineReady control, or SIMPLINK compatible devices.

• Colour buttons (Red, Green, Yellow, Blue): Access special functions in some menus.

To automatically tune the programmes on your LG 32LB561V-ZC, navigate to SETTINGS → SETUP → Auto Tuning. This will automatically tune the programmes.

• If the Input Source is not connected properly, programme registration may not work.

• Auto Tuning only finds programmes that are currently broadcasting.

• If the Lock System is turned on, a pop-up window will appear asking for a password.

To select a picture mode, go to SETTINGS → PICTURE → Picture Mode. The available modes are:

• Vivid: Heightens contrast, brightness, and sharpness to display vivid images.

• Standard: Displays images in standard levels of contrast, brightness, and sharpness.

• Eco/APS: (Depending on model) The Energy Saver feature changes settings on the TV to reduce power consumption.

• Cinema/Game: Displays the optimum picture for movies or games.

• Sports: Optimizes the video image for high and dynamic actions by emphasizing primary colours such as white, grass, or sky blue.

• Expert 1, 2: A menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This is the adjustment menu provided for ISF-certified picture tuning professionals.

To reduce power consumption by adjusting screen brightness, go to SETTINGS → PICTURE → Energy Saving. The options are:

• Auto: (Depending on model) The TV sensor detects the ambient lighting and automatically adjusts the screen brightness.

• Off: Turns off the Energy Saving mode.

• Minimum / Medium / Maximum: Applies the pre-set Energy Saving mode.

• Screen Off: The screen is turned off and only sound is played. Press any button (except the Power button) on the remote control to turn the screen back on.

SIMPLINK is a feature that enables you to control and manage various multimedia devices conveniently via the TV remote. This function is only compatible with devices with the SIMPLINK logo.

Setup:

1. Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI output terminal using a high-speed HDMI® cable (with CEC feature added).

2. Select INPUT(OPTION) → SIMPLINK. The SIMPLINK menu window will appear.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK Functions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly.

• Disc playback: Manages the multimedia device with the TV remote control.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When the equipment with SIMPLINK function connected to an HDMI terminal starts to play, the TV will automatically turn on.

• Speaker: Select the speaker on either the home theatre unit or the TV.

To set or change the TV password, navigate to SETTINGS → LOCK → Set Password. The initial password is set to ‘0000’.

To return to factory settings, go to SETTINGS → OPTION → Factory Reset. This will delete all stored information and reset the TV settings. The TV will turn itself off and back on, and all settings will be reset.

• If the Lock System is in place, a pop-up window will appear and ask for a password.

• Do not turn off the power during initialization.

• If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work.

• Some USB storage devices may not work or may work incorrectly.

• Use only USB storage devices formatted with the Windows FAT32 or NTFS File System.

• For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• If a USB HDD with a power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD.

• Data in the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility.

Go to Q.MENU → USB Device and select the USB storage device that you want to remove. When you see a message that the USB device has been removed, you can safely separate the device from the TV. Once a USB device has been selected for removal, it can no longer be read. To use it again, you must remove the USB storage device and then re-connect it.

The LG 32LB561V-ZC supports various file formats for playback from a USB device.

General Information:

• Maximum data transfer rate: 20 Mbps

• External supported subtitle formats: *.srt, *.smi, *.sub, *.ass/*.ssa, *.txt, *.psb

• Internal supported subtitle formats: XSUB (from DivX6)

Supported Video Formats (Maximum: 1920 x 1080 @ 30p):

• .asf, .wmv, .divx, .avi, .ts, .trp, .tp, .mts, .m2ts, .vob, .mp4, .m4v, .mov, .mkv, motion JPEG, .mpg, .mpeg, .mpe, .dat, .flv, .3gp, .3gp2

Supported Audio Formats:

• mp3, AAC, M4A, WMA, OGG

Supported Photo Formats:

• jpeg, jpg, jpe (Baseline, Extend Sequential, Progressive)

• BMP (Min: 64×64, Max: 9600×6400)

• PNG (Interlace, Non-Interlace, Min: 64×64, Max: 9600×6400)

Clean your TV regularly to keep the best performance and extend its lifespan. First, make sure to turn the power off and disconnect the power cord and all other cables.

Screen, frame, cabinet and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen surface with your fingernail or a sharp object.

• Do not use any chemicals (glass cleaner, car shiner, abrasives, wax, benzene, alcohol, etc.) as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord:

Remove the accumulated dust or dirt on the power cord regularly.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

• Check the power control settings. The power supply may be interrupted.

• Check if the Automatic Standby, Sleep Timer, or Off Time feature is activated in the TIME settings.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

• Turn the TV off and on again using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

The following are the specifications for the LG 32LB561V-ZC, which is part of the 32LB56** model series. Product specifications may change without prior notice.