FREE ENGLISH LG 22MN430M (01) PDF USER GUIDE
FREE ENGLISH LG 22MN430M (01) PDF USER MANUAL
FREE ENGLISH LG 22MN430M (01) PDF OWNER GUIDE
FREE ENGLISH LG 22MN430M (01) PDF OWNER MANUAL
FREE ENGLISH LG 22MN430M (01) PDF REFERENCE GUIDE
FREE ENGLISH LG 22MN430M (01) PDF INSTRUCTION GUIDE
FREE ENGLISH LG 22MN430M (01) PDF REFERENCE MANUAL
FREE ENGLISH LG 22MN430M (01) PDF INSTRUCTION MANUAL
FREE ENGLISH LG 22MN430M (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LG 22MN430M (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
LG 22MN430M (01) PDF SUMMARY:
How should I handle the monitor before operating it?
Read the manual carefully before operating the monitor and retain it for future reference.
What kind of product is this monitor?
This product is a computer monitor and not for television purposes.
Where can I find the latest drivers and software for this monitor?
You can download and install the latest version from the LGE website (www.lg.com).
What is the recommended priority for installing drivers and software?
The recommended priority is to install the Monitor Driver first, then OnScreen Control.
What should I use to assemble the monitor to ensure safety and product performance?
Always use genuine components. It is recommended that you use the supplied components.
What might happen if I use generic cables not certified by LG?
If you use generic cables not certified by LG, the screen may not display, or there may be image noises.
What should I avoid doing when assembling the product?
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product, as this may damage the product. Also, do not apply excessive force when tightening screws, as it may cause damage to the monitor.
How should I carry the monitor?
Do not carry the monitor upside down by just holding the base, as this may cause the monitor to fall off the stand and could result in personal injury. When lifting or moving the monitor, do not touch the monitor screen, as the force applied to the monitor screen may cause damage to it.
Is it normal for the monitor to have a wave pattern on its appearance?
Yes, the wave pattern is applied to added glittering material in raw material. It has good durability and there is no problem in using the product.
Can the components of the monitor differ from what is shown?
Yes, the components may look different from those shown in the manual.
Can the information in the manual change?
Yes, without prior notice, all information and specifications in this manual are subject to change to improve the performance of the product.
How do I purchase optional accessories?
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product.
Can the power cord differ?
Yes, the power cord provided may differ depending upon the region.
How do I turn the monitor on and off?
To turn the monitor on, press the joystick button once with your finger. To turn the monitor off, press and hold the joystick button once with your finger.
How do I control the volume?
You can control the volume by moving the joystick button left/right (for HDMI only).
Where is the joystick button located?
The joystick button is located at the bottom of the monitor.
What should I avoid when moving or lifting the monitor?
Avoid touching the monitor screen as far as possible to prevent damage. It is advisable to place the monitor in the original box or packing material before attempting to move it. Disconnect the power cord and all cables before moving or lifting the monitor.
How should I hold the monitor when moving it?
Hold the top and bottom of the monitor frame firmly and the screen should face away from you to prevent it from being scratched.
What should I avoid when moving the monitor?
Avoid any strong shock or vibrations to the product. Keep it upright, and never turn the monitor on its side or tilt it sideways.
What might happen if I use the monitor panel without the stand base?
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
How should I place the monitor on a table?
Lift and tilt the Monitor set into its upright position on a table, and leave a 100 mm (minimum) space from the wall for proper ventilation.
What precautions should I take before moving or installing the monitor?
Unplug the power cord prior to moving or installing the monitor, as there is a risk of electric shock. Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
What should I avoid when adjusting the angle of the monitor?
Do not hold the bottom of the Monitor set frame as you may injure your fingers. Also, do not touch or press the screen when adjusting the angle of the monitor. Do not hold the monitor set like the picture in the manual, the monitor screen can detach from the stand base and injure your body.
What is the Kensington security system and how do I use it?
The Kensington security system connector is located at the back of the Monitor set. For more information on installation and use, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional and can be obtained from most electronics stores.
What is the adjustable range of the monitor screen’s angle?
The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience.
How much clearance is needed when mounting the monitor on a wall?
Allow a clearance of 100 mm on each side and from the wall for proper ventilation.
What should I do before mounting the monitor on a wall?
Attach the Wall mounting interface (optional parts) to the back of the set. If you use screws longer than the standard, the monitor might be damaged internally. If you use improper screws, the product might be damaged and drop from the mounted position. Disconnect the power cord first, then move or install the Monitor set, otherwise electric shock may occur.
What should I avoid when installing the monitor on a wall?
Do not install the Monitor set on a ceiling or slanted wall, as it may fall and result in severe injury. Do not over-tighten the screws as this may cause damage to the Monitor set and void your warranty.
What kind of wall mounts and screws should I use?
Use only an authorized LG wall mount and contact the local dealer or qualified personnel. Use only screws and wall mounts that meet the VESA standard. Use the screws that are listed on the VESA standard screw specifications.
What is the maximum length of a screw used with the wall mount?
The screw length from the outer surface of the back cover should be under 8mm.
What does the wall mount kit include?
The wall mount kit will include an installation manual and necessary parts.
Where can I get additional wall mount accessories?
The wall mount bracket is optional, and you can obtain additional accessories from your local dealer.
What screw size and quantity is recommended for wall mounting?
A 75 x 75 wall mount uses a M4 standard screw and requires 4 screws.
What is Plug & Play?
Plug & Play is a function that allows a PC to recognize a connected device that users connect to a PC and turn on, without device configuration or user intervention.
How do I connect my PC to the monitor using D-SUB connection?
D-SUB connection transmits analog video from your PC to the Monitor set.
What adapter do I need to use a D-SUB connection with a Macintosh?
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high-density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.
How do I connect my PC to the monitor using HDMI connection?
HDMI connection transmits the digital video and audio signals from your PC to the Monitor set.
What should I know about using an HDMI PC?
If you use an HDMI PC, it can cause a compatibility problem. Use a certified cable with the HDMI logo attached.
What types of HDMI cables are recommended?
Recommended HDMI cable types are High-Speed HDMI®/TM Cable and High-Speed HDMI®/TM Cable with Ethernet.
What should I do if I want to use two PCs with my monitor?
Connect the signal cable (D-SUB/HDMI) respectively in the Monitor set.
Is it normal for the screen to flicker when the monitor is turned on while it’s cold?
Yes, if you turn the Monitor set on while it is cold, the screen may flicker, which is normal.
Is it normal for some red, green, or blue spots to appear on the screen?
Yes, some red, green, or blue spots may appear on the screen, which is normal.
How do you connect headphones to the monitor?
Connect peripherals to the monitor via the headphones port.
What should you do if angled headphones cause issues?
It is recommended to use straight headphones. Angled headphones may cause a problem with connecting another external device to the monitor.
What might limit headphone and speaker functions?
Depending on the audio settings of the PC and external device, headphone and speaker functions may be limited.
How do you activate the main menu?
Press the joystick button on the bottom of the monitor.
How do you set the options in the main menu?
Move the joystick up/down (▲/▼) and left/right(◄/►).
How do you close the main menu?
Press the joystick button once more.
What does the joystick button do when the main menu is disabled?
The joystick button enables the main menu.
What does the joystick button do when the main menu is enabled?
The joystick button closes the main menu. A long press of the button will turn off the monitor.
What does moving the joystick left do when the main menu is disabled?
It adjusts the monitor volume level for HDMI only.
What does moving the joystick left do when the main menu is enabled?
It enters the input features.
What does moving the joystick right do when the main menu is disabled?
It adjusts the monitor volume level for HDMI only.
What does moving the joystick right do when the main menu is enabled?
It enters the Settings feature.
What does moving the joystick up do when the main menu is disabled?
It displays the information on the current input.
What does moving the joystick up do when the main menu is enabled?
It turns off the monitor.
What does moving the joystick down do when the main menu is disabled?
It displays the information on the current input.
What does moving the joystick down do when the main menu is enabled?
It enters the picture mode feature for HDMI only.
What is the Settings feature in the main menu used for?
The settings feature configures the screen settings.
What is the Picture Mode feature in the main menu used for?
The picture mode feature selects the picture mode to achieve the best display effect.
What does the Input feature in the main menu do?
It sets the input mode.
What does the Power Off feature in the main menu do?
It turns off the monitor.
What does the Exit feature in the main menu do?
It exits the main menu.
How do you adjust the brightness of the screen?
Go to Settings > Quick Settings and adjust the brightness.
How do you adjust the contrast of the screen?
Go to Settings > Quick Settings and adjust the contrast.
How do you adjust the volume of the monitor?
Go to Settings > Quick Settings and adjust the volume, which is for HDMI only.
How do you mute or unmute the volume?
Move the joystick button down (▼) in the Volume menu.
How do you select the input mode?
Go to Settings > Input > Input List and select the input mode.
How do you adjust the aspect ratio of the screen?
Go to Settings > Input > Aspect Ratio and adjust the aspect ratio.
What does the Full Wide aspect ratio option do?
It displays the video in wide-screen, regardless of the video signal input.
What does the Original aspect ratio option do?
It displays the video according to the aspect ratio of the video signal input.
When might the aspect ratio options be disabled?
The options may be disabled at the recommended resolution of 1920 x 1080.
What is the Color Weakness mode for?
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.
When should you turn off the Color Weakness function?
If you feel uncomfortable with the screen, turn off this function.
Can the Color Weakness function distinguish all colors in all images?
No, this function can’t distinguish some colors in some images.
What does the Custom Picture Mode allow the user to do?
It allows the user to adjust each element and the color mode of the main menu.
What does the Reader Picture Mode do?
It optimizes the screen for viewing documents and can brighten the screen in the OSD menu.
What does the Photo Picture Mode do?
It optimizes the screen to view photos.
What does the Cinema Picture Mode do?
It optimizes the screen to improve the visual effects of a video.
What does the Game Picture Mode do?
It optimizes the screen for gameplay.
How do you adjust the sharpness of the screen?
Go to Settings > Picture > Sharpness and adjust the sharpness.
What does the SUPER RESOLUTION+ High setting do?
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high-quality video or games.
What does the SUPER RESOLUTION+ Middle setting do?
The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing. It is effective for UCC or SD video.
What does the SUPER RESOLUTION+ Low setting do?
The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for slow-moving pictures or still images.
What does the SUPER RESOLUTION+ Off setting do?
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
What is Black Level?
Black Level sets the offset level for HDMI only. Offset is the darkest color the monitor can display as a reference for a video signal.
What does the Black Level High setting do?
It keeps the current contrast ratio of the screen.
What does the Black Level Low setting do?
It lowers the black levels and raises the white levels from the current contrast ratio of the screen.
What does the DFC On setting do?
It adjusts the brightness automatically according to the screen.
What does the DFC Off setting do?
It disables the DFC feature.
How do you set the response time for displayed pictures?
Go to Settings > Game > Response Time and set the response time based on the speed of the screen.
What is the recommended Response Time setting for a normal environment?
It is recommended that you use Fast.
What is the recommended Response Time setting for a fast-moving picture?
It is recommended that you use Faster.
What is a potential issue when setting Response Time to Faster?
Setting to Faster may cause image sticking.
What does the FreeSync feature do?
It provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
What interface is required to use FreeSync?
HDMI.
What type of graphic card is required to use FreeSync?
A graphic card that supports AMD’s FreeSync is necessary.
What should you do to use FreeSync?
Make sure to update the graphic card to the latest driver.
Where can you find more information about FreeSync?
Refer to the AMD website at http://www.amd.com/.
What does the Black Stabilizer feature do?
You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen, allowing you to easily distinguish objects on dark game screens. Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
What does the Cross Hair feature do?
Cross Hair provides a mark on the center of the screen for First Person Shooter (FPS) games.
How do you select a Cross Hair?
Users can select the cross hair that fits their gaming environment among four different cross hairs.
When is the Cross Hair feature automatically turned off?
When the monitor is off or enters energy saving mode.
What do Gamma Modes do?
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
When should you select Gamma Mode 4?
If you do not need to adjust the gamma settings, select Mode 4.
What is the Warm Color Temp setting?
It sets the screen color to a reddish tone.
What is the Medium Color Temp setting?
It sets the screen color between a red and blue tone.
What is the Cool Color Temp setting?
It sets the screen color to a bluish tone.
What is the Custom Color Temp setting?
The user can adjust it to red, green, or blue by customization.
How do you customize the picture color?
You can customize the picture color using Red, Green, and Blue colors.
What does the Horizontal Configuration Adjust do?
It moves the image left and right (D-SUB only).
What does the Vertical Configuration Adjust do?
It moves the image up and down (D-SUB only).
What does the Clock Configuration Adjust do?
It minimizes any vertical bars or stripes visible on the screen background. The horizontal screen size will also change.
What does the Phase Configuration Adjust do?
It adjusts the focus of the display and allows you to remove any horizontal noise and clear or sharpen the image of characters (D-SUB only).
When is the Resolution setting enabled?
This option is enabled only when the screen resolution on your computer is set to the following (D-SUB only): 1024×768, 1280×768, 1360×768, 1366×768, 1280×960, 1600×900, 1440×900, 1600×900.
How do you reset picture settings?
Go to Settings > Picture > Picture Reset and confirm the reset.
How do you choose the language in which the control names are displayed?
Go to Settings > General > Language and choose the desired language.
What does the SMART ENERGY SAVING High setting do?
It saves energy using the high-efficiency SMART ENERGY SAVING feature.
What does the SMART ENERGY SAVING Low setting do?
It saves energy using the low-efficiency SMART ENERGY SAVING feature.
What does the SMART ENERGY SAVING Off setting do?
It disables the SMART ENERGY SAVING feature.
What does the Automatic Standby feature do?
The monitor will automatically switch to standby mode after a certain period.
What does the OSD Lock On setting do?
Key input is disabled, except for the OSD Lock mode, brightness, contrast, input, information, and volume.
What does the OSD Lock Off setting do?
Key input is enabled.
What information is shown in the Information display?
The display information shown will be the Model, Serial Number, Total Power On Time, and Resolution.
How do you reset all settings to default?
Go to Settings > General > Reset and confirm the reset.
What causes variations in the effect of SMART ENERGY SAVING?
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source. Saving Data depends on the Panel, so those values should be different from each panel and panel vendor.
What should you do if the screen color is mono or abnormal?
Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
What should you do if the screen blinks?
Check if the screen is set to interlace mode and if yes, change it to the recommended resolution.
What should you do if you see an “Unrecognized monitor, Plug&Play (VESA DDC) monitor found” message?
Be sure to install the display driver from the LG website: http://www.lg.com. Make sure to check if the video card supports Plug&Play function.
What should you do if the screen is flickering?
If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering, so change the resolution to the recommended resolution 1080P.
What should you check if no image appears on the screen?
Check if the power cord of the display is connected properly to the power outlet.
What does an “Out of Range” message on the screen mean?
This message appears when the signal from the PC (video card) is out of the horizontal or vertical frequency range of the display. See the ‘Specifications’ section of the PDF and configure your display again.
What does a “NO SIGNAL” message on the screen or black screen mean?
After the monitor is on “NO SIGNAL”, the monitor goes to DPM mode. This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it. Also, check the PC status.
What should you do if you can’t control some functions in OSD?
You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.
What should you do if you can’t select some menu in OSD?
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated, or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Keep proper posture when using the monitor; otherwise, the screen may not be optimized.
What is the maximum resolution for HDMI?
The maximum resolution is 1920 x 1080 @ 75 Hz.
What is the maximum resolution for D-sub?
The maximum resolution is 1920 x 1080 @ 60 Hz.
What is the recommended resolution?
The recommended resolution is 1920 × 1080 @ 60 Hz.
What is the power input for this monitor?
The power input is 19 V 1.3 A.
What is the typical power consumption in On Mode for the 22MN430M model?
The power consumption is 22 W Typ.
What is the typical power consumption in On Mode for the 24ML44B model?
The power consumption is 26 W Typ.
What is the power consumption in Sleep Mode?
The power consumption is ≤ 0.3 W.
What is the power consumption in Off Mode?
The power consumption is ≤ 0.3 W.
What are the operating temperature conditions?
The operating temperature is 0 °C to 40 °C.
What are the operating humidity conditions?
The operating humidity is Less than 80%.
What are the storage temperature conditions?
The storage temperature is -20 °C to 60 °C.
What are the storage humidity conditions?
The storage humidity is Less than 85%.
What is the monitor size with the stand for the 22MN430M model?
The monitor size with the stand is 509.6 mm x 395.8 mm x 181.9 mm.
What is the monitor size without the stand for the 22MN430M model?
The monitor size without the stand is 509.6 mm x 305.7 mm x 38.5 mm.
What is the monitor size with the stand for the 24ML44B model?
The monitor size with the stand is 555 mm x 421 mm x 181.9 mm.
What is the monitor size without the stand for the 24ML44B model?
The monitor size without the stand is 555 mm x 330.9 mm x 38.4 mm.
What is the weight with the stand for the 22MN430M model?
The weight with the stand is 2.8 Kg.
What is the weight without the stand for the 22MN430M model?
The weight without the stand is 2.5 Kg.
What is the weight with the stand for the 24ML44B model?
The weight with the stand is 3.1 kg.
What is the weight without the stand for the 24ML44B model?
The weight without the stand is 2.8 kg.
What are the D-sub PC Timing Display Modes?
- 720 x 400, 31.468 kHz Horizontal Frequency, 70.08 Hz Vertical Frequency, -/+ Polarity
- 640 x 480, 31.469 kHz Horizontal Frequency, 59.94 Hz Vertical Frequency, -/- Polarity
- 640 x 480, 37.5 kHz Horizontal Frequency, 75 Hz Vertical Frequency, -/- Polarity
- 800 x 600, 37.879 kHz Horizontal Frequency, 60.317 Hz Vertical Frequency, +/+ Polarity
- 800 x 600, 46.875 kHz Horizontal Frequency, 75 Hz Vertical Frequency, +/+ Polarity
- 1024 x 768, 48.363 kHz Horizontal Frequency, 60 Hz Vertical Frequency, -/- Polarity
- 1024 x 768, 60.023 kHz Horizontal Frequency, 75.029 Hz Vertical Frequency, +/+ Polarity
- 1152 x 864, 67.500 kHz Horizontal Frequency, 75 Hz Vertical Frequency, +/+ Polarity
- 1280 x 1024, 63.981 kHz Horizontal Frequency, 60.023 Hz Vertical Frequency, +/+ Polarity
- 1280 x 1024, 79.976 kHz Horizontal Frequency, 75.035 Hz Vertical Frequency, +/+ Polarity
- 1680 x 1050, 65.290 kHz Horizontal Frequency, 59.954 Hz Vertical Frequency, -/+ Polarity
- 1920 x 1080, 67.500 kHz Horizontal Frequency, 60 Hz Vertical Frequency, +/+ Polarity (Recommend Mode)
What are the HDMI PC Timing Display Modes?
- 720 x 400, 31.468 kHz Horizontal Frequency, 70.08 Hz Vertical Frequency, -/+ Polarity
- 640 x 480, 31.469 kHz Horizontal Frequency, 59.94 Hz Vertical Frequency, -/- Polarity
- 640 x 480, 37.5 kHz Horizontal Frequency, 75 Hz Vertical Frequency, -/- Polarity
- 800 x 600, 37.879 kHz Horizontal Frequency, 60.317 Hz Vertical Frequency, +/+ Polarity
- 800 x 600, 46.875 kHz Horizontal Frequency, 75 Hz Vertical Frequency, +/+ Polarity
- 1024 x 768, 48.363 kHz Horizontal Frequency, 60 Hz Vertical Frequency, -/- Polarity
- 1024 x 768, 60.023 kHz Horizontal Frequency, 75.029 Hz Vertical Frequency, +/+ Polarity
- 1152 x 864, 67.500 kHz Horizontal Frequency, 75 Hz Vertical Frequency, +/+ Polarity
- 1280 x 1024, 63.981 kHz Horizontal Frequency, 60.023 Hz Vertical Frequency, +/+ Polarity
- 1280 x 1024, 79.976 kHz Horizontal Frequency, 75.035 Hz Vertical Frequency, +/+ Polarity
- 1680 x 1050, 65.290 kHz Horizontal Frequency, 59.954 Hz Vertical Frequency, -/+ Polarity
- 1920 x 1080, 67.500 kHz Horizontal Frequency, 60 Hz Vertical Frequency, +/+ Polarity (Recommend Mode)
- 1920 x 1080, 83.89 kHz Horizontal Frequency, 74.97 Hz Vertical Frequency, +/+ Polarity
Where can I find the model and serial number of the monitor?
The model and serial number of the monitor are located on the back and one side of the monitor.
CLICK HERE TO DOWNLOAD LG 22MN430M (01) PDF MANUAL