3.0 out of 5 stars (based on 1 review)
LEXICON 480L (01) PDF MANUAL
Click here to download LEXICON 480L (01) PDF MANUAL
PDF Summary:
LEXICON 480L (01) PDF MANUAL
480L Quick Reference Guide
1. **o*sing a *o***g***t*on
In the Single configuration,
the 480L runs one program.
In the Cascad*, Stereo Split,
and Mono Split configura-
tions, it can run two programs
simul*a*eously.
To choose a configuration,
press CTRL to enter the con-
trol mode.
Use slider 2 on page 1 to
choose one of the four con-
figurations shown below.
Press CTRL again to exit the
control mode.
Inputs
L R
L
Inputs
R
L
Inputs
R
Machine
Machine
Machine
Machine
Machine
A
A
B
A
B
L R
Main Outputs
L R
Main Outputs
L R
Aux Outputs
L R
Main Outputs
L R
Aux Outputs
Single Configuration
Mono Split Configuration
Stereo Split Configura*ion
Inputs
L R
Machine
A
Machine
B
L R
Main Outputs
R L
**x Outputs
2. Loading a P**gr*m
U*e
BANK
to select the bank
that *ontains the program
you want. Press
BANK
re-
peatedly to scroll through all
the banks, or press
BANK
and a numeric key to *o di-
rectly to the bank you want.
Press
PGM
and the number
of the program **u want to
load into machine A.
If you set up the 480L with a
Split or Cascade configura-
tion, you can load a second
program into m*chine B.
Example: To load program 5.6, Rebound, press
BANK 5
to
select the Effects bank. Then press
to load the program.
PGM 6
3. Editing Parameters
After loading a program, you
can edit its parameters with
the LARC's sliders.
A code appears in the dis-
play window above each
slider. To display the com-
plete title in the main display,
move the slider, or press the
key directly below the *lide*.
Most programs have several
pages of parameters. Press
PAGE
to step through the
pages. Press
PAGE
and a
numeric key to go directly to
the page you want.
4. Storing Edited Programs in Registers
The 480L stores five banks
(1-5) of ten user-program-
mable registers in internal
memory. Another five banks
(6-10) of ten registers can be
stored in a cartridge
plugged into the front panel
of t*e 480L.
To store an edited version of
a program in a register,
press
REG
once to enter the
register mode. Press
BANK
repeatedly to locate the bank
you want to store the register
in.
5. Loading a Register
Press
REG
to switch from
program to register mode.
Lexicon *art # 070-09361
Use BANK to select the bank
that contains the register
you want. Press BANK re-
peatedly to scroll through all
the banks, or press BANK
and one of the numeric keys.
Press
REG
repeatedly to
locate an "Unused" register,
or any register you don't
mind erasing. Hold down
STO
and press
REG
at the
same time. The register is
now stored.
Press REG repeatedly to find
the register you want to load.
Press the number of the reg-
ister you want to load into
machine A.
This completes the basic introduction to the Lexicon 480L. For
detailed explanations of the many features and capabilities
not d*scribed here, read the 480L Owner's Manual.
Cascade Configuration
Press
MACH
to switch
LARC control to machine B.
Now use
BANK
,
PGM
, and
the numeric keys to load a
program. Switch control be-
tween machine A and B at
MACH
.
any time by pressing
The LARC
If you set up the 480L with a
Split or Cascade configura-
tion, you can load a second
program or register into ma-
chine B.
3 Oak Park • Bedford, MA 01730 USA • Tel 781-280-0300 • Fax 781-280-0490