Post questions, comments, reviews or errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: User Guide Yoga Duet 7 (13′′, 05) Read this first Before using this documentation and the product it supports, ensure that you read and understand the following: • Appendix A “Important safety information” on page 37 • Safety and Warranty Guide • Setup Guide First Edition (May 2020) © Copyright Lenovo 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS- 35F-05925.
Contents About this guide . . . . . . . . . . . . . iii Chapter 1. Meet your computer. . . . . 1 Front . . . . . . . . . . . . . . . . . . . . 1 Left . . . . . . . . . . . . . . . . . . . . 3 Right . . . . . . . . . . . . . . . . . . . . 4 Rear . . . . . . . . . . . . . . . . . . . . 5 Bottom . . . . . . . . . . . . . . . . . . . 5 Bluetooth folio keyboard . . . . . . . . . . . . 6 Features and specifications . . . . . . . . . . . 7 Statement on USB transfer rate. . . . . . . . 8 Operating environment . . . . . . . . . . . 8 Chapter 2. Get started with your computer. . . . . . . . . . . . . . . . . 9 Get started with Windows 10 . . . . . . . . . . 9 Windows account . . . . . . . . . . . . . 9 Windows desktop . . . . . . . . . . . . 10 Windows Updates (for selected models) . . . 11 Lenovo Vantage and Lenovo PC Manager . . . . 11 Connect to wireless networks . . . . . . . . . 12 Connect to Wi-Fi networks. . . . . . . . . 12 Use a nano SIM card (for selected models) . . 12 Connect a Bluetooth device . . . . . . . . . . 13 To connect a Bluetooth device using swift pair. . . . . . . . . . . . . . . . . . 13 To connect a Bluetooth device using conventional pair . . . . . . . . . . . . 13 Use a microSD card . . . . . . . . . . . . . 13 Install a microSD card . . . . . . . . . . 13 Combination of computer and Bluetooth folio keyboard . . . . . . . . . . . . . . . . . 14 Use the kickstand. . . . . . . . . . . . . . 14 Use a pen . . . . . . . . . . . . . . . . . 15 Lenovo Digital Pen (for selected models) . . . 16 Lenovo E-Color Pen (for selected models). . . 17 Interact with your computer . . . . . . . . . . 19 Keyboard hotkeys . . . . . . . . . . . . 19 Use the multi-touch screen . . . . . . . . 20 Chapter 3. Explore your computer . . 23 Manage power . . . . . . . . . . . . . . . 23 Check the battery status . . . . . . . . . 23 Charge the battery. . . . . . . . . . . . 23 Check the battery temperature . . . . . . . 23 Set power button behavior. . . . . . . . . 23 Change or create a power plan . . . . . . . 23 Set performance mode . . . . . . . . . . 24 Change settings in UEFI/BIOS setup utility . . . . 24 What is UEFI/BIOS setup utility. . . . . . . 24 Open the UEFI/BIOS setup utility . . . . . . 24 Change the startup sequence . . . . . . . 24 Change hotkey mode. . . . . . . . . . . 24 Enable or disable always-on . . . . . . . . 24 Set passwords in UEFI/BIOS setup utility. . . . . 25 Password types. . . . . . . . . . . . . 25 Set administrator password . . . . . . . . 25 Change or remove administrator password . . 25 Set user password. . . . . . . . . . . . 26 Enable power-on password . . . . . . . . 26 Set hard disk password. . . . . . . . . . 26 Change or remove hard disk password. . . . 27 Reset or restore Windows. . . . . . . . . . . 27 Windows 10 recovery options . . . . . . . 27 Windows System Restore . . . . . . . . . 27 Reset Windows . . . . . . . . . . . . . 28 Create a recovery drive . . . . . . . . . . 28 Use a recovery drive to restore or reset Windows . . . . . . . . . . . . . . . 29 Chapter 4. Help and support . . . . . 31 Frequently asked questions . . . . . . . . . . 31 Self-help resources . . . . . . . . . . . . . 31 What is a CRU?. . . . . . . . . . . . . . . 32 CRUs for your product model . . . . . . . . . 32 Call Lenovo . . . . . . . . . . . . . . . . 34 Before you contact Lenovo . . . . . . . . 34 Lenovo Customer Support Center. . . . . . 34 Purchase additional services. . . . . . . . . . 35 Appendix A. Important safety information. . . . . . . . . . . . . . . 37 Appendix B. Accessibility and ergonomic information . . . . . . . . 49 Appendix C. Compliance information. . . . . . . . . . . . . . . 53 Appendix D. Notices and trademarks. . . . . . . . . . . . . . . 65
© Copyright Lenovo 2020 i ii User Guide About this guide • This guide applies to Lenovo product model(s) listed below. Illustrations in this guide may look slightly different from your product model. Model name Machine type (MT) Yoga Duet 7 13IML05 82AS • This guide may contain information about accessories, features, and software that are not available on all models. • This guide contains instructions that are based on the Windows 10 operating system. These instructions are not applicable if you install and use other operating systems. • Microsoft® makes periodic feature changes to the Windows® operating system through Windows Update. As a result, the operating system related instructions may become outdated. Refer to Microsoft resources for the latest information. • The content of the guide is subject to change without notice. To obtain the latest version, go to support.lenovo.com. © Copyright Lenovo 2020 iii iv User Guide Chapter 1. Meet your computer Front 1. Ventilation slots Dissipate internal heat. Note: Do not block the ventilation slots. Otherwise, the computer might overheat. 2. Infrared LED Emit infrared light for face authentication. 3. Front camera • Capture still and moving images for taking photos, recording videos, and video chatting. • Capture your face images for face authentication. Note: Use Windows Hello to enroll your face for face authentication. 4. Camera light If the light is on, the camera is in use. 5. Wi-Fi antennas Send and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module. Note: The antennas are not visible from the outside of the computer. 6. Wireless WAN antennas * Send and receive radio waves for the built-in wireless WAN (wide area network) module. Note: The antennas are not visible from the outside of the computer. 7. Screen Display text, graphics, and videos. The screen supports multi-touch function. © Copyright Lenovo 2020 1 8. ToF sensor Detect user behavior and adjust settings automatically. Note: If your computer is in Tablet, Stand or Detached mode, the sensor works at the appropriate angle. 9. Microphones Capture or record sound and voice. * for selected models 2 User Guide Left 1. Speaker Produce sound. 2. Nano SIM card slot* /microSD card slot • Use the nano Subscriber Identity Module (SIM) card (sold separately) to connect to a mobile broadband network.* • Use the microSD card (sold separately) to transfer or store files. 3. Combo audio jack Connect to headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. Note: This jack does not support standalone external microphones. If you use headsets, choose one with a single plug. 4. Power connector/USB-CTM connector (2) • Plug the ac power adapter into the connector to provide power to the computer and charge the internal battery. • Connect external display, storage, or data devices. Note: An appropriate adapter may be needed for connecting external devices. * for selected models Chapter 1. Meet your computer 3 Right 1. USB-CTM connector (always-on) The always-on connector can charge external devices when the computer is turned off, in sleep or hibernation mode. The always-on function can be turned on or off in the UEFI/BIOS setup utility. Note: If Lenovo Vantage is pre-installed on your computer, you can also set always-on function from within that software. 2. Volume buttons Press the button to increase or decrease the system volume. 3. Power button (with a light) • Press the button to turn on the computer or put the computer into sleep mode. • The power button has an integrated light to show the power status. – On: The computer is turned on. – Off: The computer is turned off or in hibernation mode. – Blinking: The computer is in sleep mode. 4. Speaker Produce sound. 4 User Guide Rear 1. Rear camera Capture still and moving images for taking photos, recording videos, and video chatting. 2. Kickstand hinges Pivot the kickstand. 3. Kickstand Support your computer when it is placed on a surface. Bottom 1. Pogo pin with guide pin The pogo pin with guide pin enables you to attach the keyboard to your computer magnetically. Chapter 1. Meet your computer 5 Bluetooth folio keyboard 1. Pogo pin with guide pin The pogo pin with guide pin enables you to attach the keyboard to your computer magnetically.
2. Bluetooth folio keyboard switch Push the switch to a different position to enable the following functions. • Off position: Keyboard is turned off. • Middle position: Keyboard is turned on and will connect with the latest connected device.
• Bluetooth icon position: Press and hold the Bluetooth folio keyboard switch to the Bluetooth icon position for three seconds. The keyboard will enable Bluetooth pairing. Note: The spring switch will move back to the middle position automatically after releasing the switch. 3. Bluetooth light • Solid amber: Keyboard is charging through the pogo pin. • Continuously blinking white (up to 1 min): Pairing • Solid white (for three seconds) and then off: Paired • Slowly blinking white: Keyboard is working and connected with pogo pin. • Blinking amber: Battery power is low. • Off: – Keyboard is fully charged and connected with pogo pin. – The keyboard battery has no power. 4. Keyboard Enter characters and interact with programs. Note: The keyboard also includes hotkeys and function keys for changing settings and performing tasks quickly. 5. Touchpad Perform finger touch and all the functions of a traditional mouse. Note: The touchpad also supports multi-touch function. 6 User Guide Features and specifications Dimensions • Width: 297.4 mm (11.71 inches) • Depth: 207.36 mm (8.16 inches) • Thickness: 9.19 mm (0.36 inches) ac power adapter • Input: 100 V ac–240 V ac, 50 Hz–60 Hz • Output: 20 V dc, 2.25 A • Power: 45 W Battery pack • Capacity: 42 Wh • Number of cells: 4 Microprocessor To view the microprocessor information of your computer, right-click the Start button and then select System. Memory • Type: Onboard • Number of slots: 0 Storage device • Type: solid-state drive • Form factor: M.2 (2242) • Bus: PCI Express Screen • Size: 13 inches • Display resolution: 2160 × 1350 pixels (WQHD model) Bluetooth folio keyboard • Function keys • Hotkeys • Keyboard backlight • Bluetooth folio keyboard switch Connectors and slots • Combo audio jack • USB-C connector × 3 (one connector with Always-On function) • microSD card slot • Nano SIM card slot* Security features • UEFI/BIOS passwords – Administrator password – User password – Master hard disk password – User hard disk password Wireless features • Bluetooth • Wireless LAN • Wireless WAN * * for selected models Chapter 1. Meet your computer 7 Note: The battery capacity is the typical or average capacity as measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity (see product label). Statement on USB transfer rate Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device. USB device Data rate (Gbit/s) 3.2 Gen 1 5 3.2 Gen 2 10 3.2 Gen 2 × 2 20 Operating environment Maximum altitude (without pressurization) 3048 m (10 000 ft) Temperature • At altitudes up to 2438 m (8000 ft) – Operating: 5°C to 35°C (41°F to 95°F) – Storage: 5°C to 43°C (41°F to 109°F) • At altitudes above 2438 m (8000 ft) – Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F) Note: When you charge the battery, its temperature must be no lower than 10°C (50°F). Relative humidity • Operating: 8% to 95% at wet-bulb temperature 23°C (73°F) • Storage: 5% to 95% at wet-bulb temperature 27°C (81°F) The Bluetooth folio keyboard bottom cover is fabric. Handle your keyboard with care so that you can enjoy this product for a long time. If possible, place your computer in a dry, well-ventilated area without direct exposure to sunshine. Do not use or store your computer in dusty, dirty areas, or extremely hot or cold areas. 8 User Guide Chapter 2. Get started with your computer Get started with Windows 10 Learn the basics of Windows 10 and start working with it right away. For more information about Windows 10, see the Windows help information. Windows account You must create at least one account to use the Windows operating system. It can be either a local account or a Microsoft account. Local accounts A local account is created on a particular Windows-enabled device and it can only be used on that device. It is recommended that you set a password for each local account to prevent unauthorized access to the device. Microsoft accounts A Microsoft account is a user account that you use to sign in to Microsoft software and services. If you use Microsoft services like OneDrive, Outlook.com, Xbox Live, Office 365, and Skype, you might already have one. If you don't have it, you can create one for free. There are two main benefits of using a Microsoft account: • Sign in only once. If you use a Microsoft account to sign in to Windows 10, you don’t need to sign in again to use OneDrive, Skype, Outlook.com, and other Microsoft services. • Settings can be synced. If you use your Microsoft account to sign in to multiple Windows-enabled devices, certain Windows settings can be synced among the devices. Switch between a local and a Microsoft account If you are using a local account to sign in to Windows 10, you can switch to use a Microsoft account instead. Step 1. Open the Start menu and select Settings ➙ Accounts. Step 2. Select Sign in with a Microsoft account instead. Step 3. If you already have a Microsoft account, enter the account name and password to sign in. Otherwise, select Create one to create a new Microsoft account. Note: The device must have Internet access the first time you use a Microsoft account on that device. If you want to switch back to use a local account, open the Start menu and select Settings ➙ Accounts ➙ Sign in with a local account instead. Add additional user accounts Your user account must be of the “Administrator” type to add additional user accounts to Windows. Add additional user accounts if you need to share your computer with family members or other users. Step 1. Open the Start menu and select Settings ➙ Accounts ➙ Family & other users. Step 2. Select Add someone else to this PC. © Copyright Lenovo 2020 9 Note: To add family members, you need to sign in with a Microsoft account. Step 3. Set the user name and password for the user account. Set up face recognition If your computer includes a Windows Hello-compatible infrared camera, you can set up face recognition to sign in with your face. Step 1. Open the Start menu and select Settings ➙ Accounts ➙ Sign-in options. Note: If you are using a local account, the account must be password protected. Otherwise, you cannot set face recognition. Step 2. Under Manage how you sign in to your device, select Windows Hello Face ➙ Set up ➙ Get started. Step 3. Follow on-screen instructions to complete face recognition. Create a PIN when prompted, in case face recognition does not work at Windows sign-in. Windows desktop Change 1. Account account settings, lock the computer, or sign out of the current account. 2. Documents Open the Documents folder, a default folder to save your received files. 3. Pictures Open the Pictures folder, a default folder to save your received pictures. 4. Settings Open Settings. 5. Power Shut down, restart, or put the computer into sleep mode. 6. Start button Open the Start menu. 7. Windows Search Enter what you are looking for in the search box and get search results from your computer and the Web. 10 User Guide Display 8. Task View all opened apps and switch between them. 9. Windows notification area Display notifications and status of some features. 10. Battery status icon Display power status and change battery or power settings. 11. Network icon Connect to an available wireless network and display the network status. 12. Action center Display the latest notifications from apps and provide quick access to some features. Open the Start menu • Click the Start button. • Press the Windows logo key on the keyboard. Open Control Panel • Open the Start menu and select Windows System ➙ Control Panel. • Use Windows Search. Open an app • Open the Start menu and select the app you want to open. • Use Windows Search. Windows Updates (for selected models) Microsoft periodically releases feature and security updates to the Windows operating system. Updates that are applicable to your version of Windows are downloaded automatically when your computer is connected to the Internet. When updates are downloaded, you are prompted to restart the computer to install these updates. Manually check for updates Updates to Windows are downloaded automatically. However, you can also manually check if there are available updates for the installed version of Windows. Attention: Only download and install updates using Windows Update. Updates downloaded from other sources may include security risks. Step 1. Select Start ➙ Settings ➙ Update & Security. Step 2. Click Check for updates. Lenovo Vantage and Lenovo PC Manager Lenovo Vantage and Lenovo PC Manager is software developed by Lenovo. Using the software, you can: • View product information • View warranty and support information • Run hardware scan and diagnose problems • Change hardware settings • Update Windows, drivers, and UEFI/BIOS Lenovo Vantage or PC Manager may be pre-installed on your computer. To open it, enter the software name in Windows Search and select the matched result. Chapter 2. Get started with your computer 11 Note: If Lenovo Vantage is not pre-installed, you can download it from Microsoft Store. Connect to wireless networks Connect your computer to the Internet or other wireless networks so that you can browse on your computer and share information. Connect to Wi-Fi networks If your computer includes a wireless adapter, you can connect your computer to Wi-Fi networks. Step 1. Click the network icon in the Windows notification area. A list of nearby networks is displayed. Note: If no network is displayed, check to ensure that the airplane mode is not turned on. Step 2. Select a network and click Connect. Provide security key if prompted. Note: The network key is usually managed by the network administrator. Forget a Wi-Fi network Windows saves a list of Wi-Fi networks you have connected to, along with their passwords and other settings. By doing this, your computer is automatically connected when it is in the range of a previously connected network. However, if the network password has been changed, you need to forget the network in order to enter a new password. Step 1. Select Start ➙ Settings ➙ Network & Internet ➙ Wi-Fi. Step 2. Click Manage known networks. Step 3. Click the network name and click Forget. Turn airplane mode on and off Airplane mode is a convenient setting to turn all wireless communications of your computer on and off. You may need to turn it on when boarding an airplane. Step 1. Click the action center icon in the Windows notification area. Step 2. Click the Airplane mode icon to turn it on or off. Notes: • Click Expand if you cannot find the airplane mode icon. • Bluetooth folio keyboard will be disabled when the airplane mode is turned on. Use a nano SIM card (for selected models) If your computer has a nano SIM card slot on the left side of the computer, you can insert a nano SIM card into the nano SIM card slot to establish wireless WAN connections. Install a nano SIM card Step 1. Use an ejection tool to eject the card tray, and then slide the tray out of the computer. Step 2. Install a new nano SIM card into the tray and insert the tray into the card slot. Ensure that the new nano SIM card is installed in the correct orientation. 12 User Guide Connect a Bluetooth device Bluetooth is a short-range wireless communications technology. Use Bluetooth to establish a wireless connection between your computer and another Bluetooth-enabled device within a distance of about 10 m (32.8 ft). To connect a Bluetooth device using swift pair Step 1. Turn on the Bluetooth device that supports swift pair and make it discoverable. For more information, see the document that comes with the Bluetooth device. Step 2. Select Connect when a swift pair notification appears that a new Bluetooth device was found. To connect a Bluetooth device using conventional pair If you do not receive the swift pair notification, you can also do as the follows to pair a Bluetooth device. Step 1. Turn on the Bluetooth device and make it discoverable. Step 2. Select ➙ Devices ➙ Bluetooth and other devices ➙ Add Bluetooth or other devices ➙ Bluetooth. A list of available Bluetooth devices is displayed. Step 3. Select the target Bluetooth device and start pairing. Use a microSD card Your computer has a microSD card slot on the left side of the computer. You can insert a microSD card into the microSD card slot to expand the computer local storage capacity. Attention: • Before handling the microSD card, touch a metal table or a grounded metal object. Otherwise the card might get damaged by the static electricity from your body. • During data transfer, do not put your computer into sleep mode; otherwise, your data could get damaged. Install a microSD card Step 1. Use an ejection tool to eject the card tray, and then slide the tray out of the computer. Chapter 2. Get started with your computer 13 ➙ Step 2. Install a new microSD card into the tray and insert the tray into the card slot. Ensure that the new microSD card is installed in correct orientation. Combination of computer and Bluetooth folio keyboard Align the connector of the keyboard with the computer and then attach the computer in the direction shown by the arrow. Note: Pair the Bluetooth folio keyboard with the computer the first time you use the keyboard. The Bluetooth folio keyboard supports swift pair. Refer to “Connect a Bluetooth device” on page 13. Use the kickstand Your computer has a built-in kickstand. Pivot the kickstand from the pits on both sides of the computer to the open position as shown. 14 User Guide With the kickstand open, you can use the computer in the following modes. • Stand mode without Bluetooth folio keyboard attached • Stand mode with Bluetooth folio keyboard attached • Stylus mode The kickstand is multi-positional. You can adjust the kickstand to various angles for a comfortable user experience. Attention: The appropriate kickstand angle is 45o–150o. Using the kickstand at an improper angle may damage the computer. Use a pen Depending on the model, your computer might come with a pen. The pen enables you to write and draw in a natural manner. Chapter 2. Get started with your computer 15 You can view or change functions of pen buttons in the Lenovo Pen Settings. For more information, refer to the User Guide of the software. Notes: • The pen is not waterproof. Take care not to drop the pen in water. • The pen contains pressure sensors. Do not push the tip of the pen for an extended period of time. Do not subject the pen to shock or vibration. • The default function of each pen button might vary in different apps. • The Lenovo Pen Settings may be pre-installed on your computer. To open it, enter the software name in Windows Search and select the matched result. If the software is not pre-installed, you can download and install the latest drivers from support.lenovo.com. Lenovo Digital Pen (for selected models) The Lenovo Digital Pen referred to as the pen in this section. 1. Pen cap Unscrew the pen cap to install or replace a battery. 2. Top barrel button To right-click, hold the button and tap the screen in supported applications. 3. Bottom barrel button To erase text or drawings, hold the button to erase the object in supported applications. 4. Pen tip Write or draw on the touch screen. 16 User Guide Install pen battery Note: AAAA alkaline battery may not be included in some countries and regions. Lenovo E-Color Pen (for selected models) The Lenovo E-Color Pen referred to as the pen in this section. 1. Top pen button Hold the button for at least three seconds to enable Bluetooth pairing on the pen. Note: Lenovo E-Color Pen supports swift pair. Refer to “Connect a Bluetooth device” on page 13. The pen is discoverable as Lenovo E-Color Pen. 2. Pen status light • Continuously blinking white (up to 40 seconds): Pairing • Fast blinking white (5 times): Paired • Solid amber: The pen is charging. • Blinking amber: Battery power is low. • Off: The pen is turned off or connected to a computer. 3. Top barrel button To right-click, hold the button and tap the screen in supported applications. Chapter 2. Get started with your computer 17 4. Bottom barrel button To erase text or drawings, hold the button to erase the object in supported applications. 5. Pen tip To click, tap on the screen with the tip. To double-click, tap twice. Charge the pen To charge the pen, connect the pen to a 5 V charger with a USB-C cable. Pen operating mode The pen supports two operating modes: Windows mode (default mode) and Color mode. After connecting with Bluetooth, you can set the operating modes in the Lenovo Pen Settings. • Windows mode: – Write or draw on the touch screen. – View or change functions of the top pen button and two barrel buttons in the Lenovo Pen Settings. • Color mode: – Write or draw on the touch screen. – View or change functions of the two barrel buttons in the Lenovo Pen Settings. – The top pen button only supports color capture function. 1. Push the top pen button on a select flat surface until you hear a click. 2. The pen will capture the color information of the surface and then send the information to ColorKing software through Bluetooth. 3. Check the color information on ColorKing. 4. Use the color on other graphics software through ColorKing. For more information, please follow the instructions in the graphics software. Note: Depending on the software, select software may not support this function. 18 User Guide Note: The ColorKing may be pre-installed on your computer. To open it, enter the software name in Windows Search and select the matched result. If the software is not pre-installed, you can download and install the latest drivers from support.lenovo.com. Interact with your computer Keyboard hotkeys Some keys on the keyboard are printed with icons. These keys are called hotkeys and can be pressed alone or in combination with the Fn key to open certain apps or change certain settings quickly. The functions of the hotkeys are symbolized by the icons printed on them. Hotkey Function Turn on/off or adjust the brightness of the keyboard backlight. Note: This hotkey must be used with the Fn key. Hotkey mode Some hotkeys share keys with function keys (F1 to F12). The hotkey mode is a UEFI/BIOS setting that changes how hotkeys (or function keys) are used. Hotkey mode setting How to use hotkeys How to use function keys
Disabled Hold down the Fn key and press one of the hotkeys. Press the function keys directly.
Enabled Press the hotkeys directly. Hold down the Fn key and press one of the function keys. Note: Hotkeys that do not share keys with function keys are not affected by the hotkey mode setting. They should always be used with the Fn key. Chapter 2. Get started with your computer 19 Mute/Unmute sound. Decrease/Increase system volume. Mute/Unmute the microphone. Increase/Decrease screen brightness. Switch display devices. Turn airplane mode on and off. Open the Windows Settings app. Lock the screen. Display thumbnails of all open apps. Open the Windows Calculator app. Open Lenovo Vantage, Lenovo PC Manager, or an app launch bar. Open the Windows Snipping Tool app. The FnLock switch The FnLock is a switch that reverses the default and hidden function of a hotkey. The following table provides an example of how the FnLock switch changes the default function of the F1 key. FnLock FnLock light Default function of the F1 key Off Off Mute/Unmute sound On On F1 function * Note: The F1 function is application-dependent. It may have no function if the active application does not have a definition for the key. The FnLock switch shares the ESC key (in the upper left corner of the keyboard). To turn it on or off, press Fn + ESC. Use the multi-touch screen If your computer screen supports multi-touch function, you can navigate the screen with simple touch gestures. Note: Not all gestures are available on all apps. Slide Scroll through items, such as lists, pages, and photos. 20 User Guide Tap once • From the Start menu: Open an app or item. • From the desktop: Select an app or item. • In an open app: Perform an action such as Copy, Save, and Delete, depending on the app. Tap twice quickly Open an app or item from the desktop. Tap and hold Open a shortcut menu. Drag an item to the location you want Move an object. Move two fingers closer together Zoom out. Move two fingers farther apart Zoom in. Swipe in from the right edge Open the action center to see your notifications and quick actions. Swipe in from the left edge View all your open windows in task view. • Swipe downwards shortly from the top edge (for full-screened app or when your computer is in the tablet mode) Show a hidden title bar. • Swipe in from the top edge to the bottom edge (when your computer is in the tablet mode) Close the current app. Chapter 2. Get started with your computer 21 22 User Guide Chapter 3. Explore your computer Manage power Use the information in this section to achieve the best balance between performance and power efficiency. Check the battery status The battery status icon is in the Windows notification area. You can check the battery status, view the current power plan, and access battery settings quickly. Click the battery status icon to display the percentage of battery power remaining and change the power mode. A warning message is displayed when the battery is low. Charge the battery When the remaining battery power is low, charge your battery by connecting your computer to ac power. The battery is fully charged in about two to four hours. The actual charging time depends on the battery capacity, the physical environment, and whether you are using the computer. Battery charging is also affected by its temperature. The recommended temperature range for charging the battery is between 10°C (50°F) and 35°C (95°F). Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining power is greater than 95%. Check the battery temperature You can check the battery temperature in Lenovo Vantage or Lenovo PC manager. Step 1. Open Lenovo Vantage. Step 2. Click Hardware Settings ➙ Power. Step 3. Locate the Power Status section and then click Show Details to view the battery temperature. Note: If you’re using Lenovo PC Manager, select System hardware ➙ Battery. Set power button behavior By default, pressing the power button puts the computer to sleep mode. However, you can change the power button behavior in Windows Control Panel. Step 1. Right-click the battery status icon in the Windows notification area. Step 2. Select Power Options ➙ Choose what the power button does. Change or create a power plan A power plan is a set of power saving settings. You can choose a pre-defined power plan or you can create your own plans. Step 1. Right-click the battery status icon in the Windows notification area. Step 2. Select Power Options ➙ Change plan settings. © Copyright Lenovo 2020 23 or Set performance mode Your computer can work in different performance modes. The performance and power consumption of the computer vary in different performance modes. Change settings in UEFI/BIOS setup utility This section introduces what is UEFI/BIOS and the operations you can perform in its setup utility. What is UEFI/BIOS setup utility UEFI/BIOS is the first program that runs when a computer starts. UEFI/BIOS initializes hardware components and loads the operating system and other programs. Your computer may include a setup program (setup utility) with which you can change certain UEFI/BIOS settings. Open the UEFI/BIOS setup utility Step 1. Turn on or restart the computer. Step 2. When the Lenovo logo appears on the screen, press F2 repeatedly. Note: For computers with hotkey mode enabled, press Fn + F2. Change the startup sequence You may need to change the startup sequence to allow the computer to start from another device or a network location. Step 1. Open the UEFI/BIOS setup utility. Step 2. Navigate to the Boot menu. Step 3. Follow on-screen instructions to change the order of devices under Boot Priority Order. Note: You can also change startup sequence temporarily without opening the setup utility. To do so, start the computer. When the Lenovo logo appears, press F12 (or Fn + F12) repeatedly. Change hotkey mode Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Configuration ➙ Hotkey Mode and press Enter. Step 3. Change the setting to Disabled or Enabled. Step 4. Select Exit ➙ Exit Saving Changes. Enable or disable always-on For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled in the UEFI/BIOS setup utility. Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Configuration ➙ Always On USB and press Enter. Step 3. Change the setting to Disabled or Enabled. Step 4. Select Exit ➙ Exit Saving Changes. 24 User Guide Set passwords in UEFI/BIOS setup utility This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware Interface) or BIOS (Basic Input/Output System) setup utility. Password types You can set various types of passwords in the UEFI/BIOS setup utility. Password type Pre-requisite Usage Administrator password No You must enter it to start the setup utility.
User password The administrator password must be set. You can use the user password to start the setup utility.
Master hard disk password No You must enter it to start the operating system.
User hard disk password The master hard disk password must be set. You can use the user hard disk password to start the operating system. Notes:
• All passwords set in the setup utility consist of alphanumeric characters only. • If you start the setup utility using the user password, you can only change a few settings. Set administrator password You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility. Attention: If you forget the administrator password, a Lenovo authorized service personnel cannot reset your password. You must take your computer to a Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee will be charged for parts and service. Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Security ➙ Set Administrator Password and press Enter. Step 3. Enter a password string that contains only letters and numbers and then press Enter Step 4. Enter the password again and press Enter. Step 5. Select Exit ➙ Exit Saving Changes. Next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator password or the user password to start the computer. Change or remove administrator password Only the administrator can change or remove the administrator password. Step 1. Open the UEFI/BIOS setup utility using the administrator password. Step 2. Select Security ➙ Set Administrator Password and press Enter. Step 3. Enter the current password. Chapter 3. Explore your computer 25 Step 4. In the Enter New Password text box, enter the new password. Step 5. In the Confirm New Password text box, enter the new password again. Note: If you want to remove the password, press Enter in both text boxes without entering any character. Step 6. Select Exit ➙ Exit Saving Changes. If you remove the administrator password, the user password is also removed. Set user password You must set the administrator password before you can set the user password. The administrator of the setup utility might need to set a user password for use by others. Step 1. Open the UEFI/BIOS setup utility using the administrator password. Step 2. Select Security ➙ Set User Password and press Enter. Step 3. Enter a password string that contains only letters and numbers and then press Enter. The user password must be different from the administrator password. Step 4. Enter the password again and press Enter. Step 5. Select Exit ➙ Exit Saving Changes. Enable power-on password If the administrator password has been set, you can enable power-on password to enforce greater security. Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Security ➙ Power on Password and press Enter. Note: The administrator password must be set in advance. Step 3. Change the setting to Enabled. Step 4. Select Exit ➙ Exit Saving Changes. If power-on password is enabled, a prompt appears on the screen every time you turn on the computer. You must enter the administrator or user password to start the computer. Set hard disk password You can set a hard disk password in the setup utility to prevent unauthorized access to your data. Attention: Be extremely careful when setting a hard disk password. If you forget the hard disk password, a Lenovo authorized service personnel cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee will be charged for parts and service. Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Security ➙ Set Hard Disk Password and press Enter. Note: If you start the setup utility using the user password, you cannot set hard disk password. Step 3. Follow on-screen instructions to set both master and user passwords. Note: The master and user hard disk passwords must be set at the same time. 26 User Guide Step 4. Select Exit ➙ Exit Saving Changes. If the hard disk password is set, you must provide the correct password to start the operating system. Change or remove hard disk password Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Security. Step 3. Change or remove the hard disk password. To change or remove master password, select Change Master Password and press Enter. Note: If you remove the master hard disk password, the user hard disk password is also removed. To change user password, select Change User Password and press Enter. Note: The user hard disk password cannot be removed separately. Step 4. Select Exit ➙ Exit Saving Changes. Reset or restore Windows This section introduces the recovery options of Windows 10. Ensure that you read and follow the on-screen recovery instructions. Attention: The data on your computer might be deleted during the recovery process. To avoid data loss, make a backup copy of all the data that you want to keep. Windows 10 recovery options Windows 10 provides several options for you to restore or reset your computer. The following table helps you decide which option to choose if you are having problems with Windows. Problem Option
Your computer is not working well after installing apps, drivers, or updates. Restore to a system restore point. Your computer is not working well and you don't know what causes the problem. Reset your computer.
You want to recycle or donate your computer. Reset your computer. Windows cannot start properly. Use a recovery drive to restore or reset your computer. Windows System Restore System Restore is a tool included in Windows 10. It monitors changes to Windows system files and saves system state as a restore point. If your computer does not work well after installing apps, drivers, or updates, you can revert your system to a previous restore point. Note: If you revert your system to a previous restore point, personal data is not affected. System Restore creates restore points: • automatically (when it detects changes to Windows system files) • at regular intervals (if set up by the user) Chapter 3. Explore your computer 27 • at any time (if initiated manually by the user) Note: In order for System Restore to create restore points, system protection must be turned on for the system drive. Create a system restore point manually You can use Windows System Restore to create a restore point at any time. Step 1. In the Windows 10 search box, enter Create a restore point and select the matched result. Step 2. Select the System Protection tab and then select Create. Note: System protection must be turned on for the system drive (typically with drive letter C) before you can create restore points. Select a drive and then select Configure to turn on or disable system protection. Restore from a system restore point Step 1. In Windows 10 search box, enter Recovery and select the matched result. Step 2. Select Open System Restore ➙ Next. Step 3. Select a restore point and then select Next ➙ Finish. Note: You may select Scan for affected programs to check which program and driver installation is associated with a particular restore point. Reset Windows If Windows is not running well as usual, you can choose to reset it. Step 1. Open the Start menu and then select Settings ➙ Update & Security ➙ Recovery. Step 2. Under Reset this PC, click Get started. Step 3. Choose either Keep my files or Remove everything. Attention: Back up personal data before choosing Remove everything. Step 4. Follow on-screen instructions to complete the reset process. Create a recovery drive Use a USB drive (not supplied) to create a Windows recovery drive. If Windows will not start, you can use the recovery drive to restore or reset Windows. Notes: Most USB drives utilize the Type-A connector. If your computer does not include a USB Type-A connector, you have two options: • Purchase and use a USB drive with the Type-C connector, or • Purchase and use a USB Type-C to Type-A adapter Step 1. In the Windows 10 search box, enter Create a recovery drive and select the matched result. Step 2. Make sure Back up system files to the recovery drive is selected and then select Next. Step 3. Plug a USB drive into your computer, select it, and then select Next ➙ Create. Attention: Previous files on the drive will be deleted. Back up personal files before using it to create a recovery drive. 28 User Guide When the recovery drive is created, you may see a Delete the recovery partition from your PC option. If you want to free up drive space on your computer, select it and then select Delete. Otherwise, select Finish. Use a recovery drive to restore or reset Windows If Windows cannot start, you can use a recovery drive (created in advance) to restore or reset Windows. Step 1. Connect the recovery drive to your computer; restart your computer and set it to start from the recovery drive. Note: For computers without a USB Type-A connector, you may need to purchase and use an adapter (USB Type-C to Type-A) to use a recovery drive. Step 2. On the Choose an option screen, select Troubleshoot. Step 3. Choose a recovery option. Select Advanced Options ➙ System Restore to restore your computer to a system restore point. Or select Recover from a drive to reset your computer. Note: If you did not select the Back up system files to the recovery drive option when creating the recovery drive, Recovery from a drive is not available. Attention: All personal files created on your computer will be deleted after recovering from the drive. Chapter 3. Explore your computer 29 30 User Guide Chapter 4. Help and support Frequently asked questions How do I open the Control Panel? • Open the Start menu and select Windows System ➙ Control Panel. • Use Windows Search. How should I turn off my computer? Open the Start menu and select Power ➙ Shut down. How do I partition my storage drive? Refer to support.lenovo.com/solutions/ht503851
What should I do if my computer stops responding. Press and hold the power button until the computer turns off. Then restart the computer. What should I do if I spill liquid on the computer? 1. Carefully unplug the ac power adapter and turn off the computer immediately. The more quickly you stop the current from passing through the computer the more likely you will reduce damage from short circuits. Attention: Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable. 2. Wait until you are certain that all the liquid is dry before turning on your computer. CAUTION: Do not try to drain out the liquid by turning over the computer. If your computer has keyboard drainage holes on the bottom, the liquid will be drained out through the holes. Where can I get the latest device drivers and UEFI/BIOS? • Lenovo Vantage or Lenovo PC Manager • Lenovo Support Web site at support.lenovo.com Self-help resources
Use the following self-help resources to learn more about the computer and troubleshoot problems. Resources How to access? Use Lenovo Vantage or Lenovo PC Manager to:
• Download and install the latest drivers and firmware. • Configure hardware settings • Diagnose computer hardware problems. • Check the computer warranty status. • Open the Start menu and select Lenovo Vantage or PC Manager. • Use Windows Search. Product documentation: • Safety and Warranty Guide • Setup Guide • This User Guide • Regulatory Notice 1. Go to support.lenovo.com. 2. Detect your computer or select computer model manually. 3. Select Documentation and filter out the documentation you want.
© Copyright Lenovo 2020 31 Resources How to access? Lenovo Support Web site with the latest support information of the following: • Drivers and software
• Diagnostic solutions • Product and service warranty • Product and parts details • Knowledge base and frequently asked questions Visit support.lenovo.com Windows help information • Open the Start menu and select Get Help or Tips. • Use Windows Search or the Cortana® personal assistant.
• Microsoft support Web site: support.microsoft.com What is a CRU? Customer replaceable units (CRUs) are parts that can be upgraded or replaced by the customer. A Lenovo computer may contain the following types of CRUs: Self-service CRU Parts that can be installed or replaced easily by customer themselves or by trained service technicians at an additional cost. Optional-service CRU Parts that can be installed or replaced by customers with a greater skill level. Trained service technicians can also provide service to install or replace the parts under the type of warranty designated for the customer’s machine. If you intend to install a CRU, Lenovo will ship the CRU to you. You might be required to return the defective part that is replaced by the CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. For full details, see the Lenovo Limited Warranty at lenovo.com/warranty/llw_ 02.CRUs for your product model The table below lists the CRUs and CRU types that are defined for your product model. Part Self-service CRU Optional-service CRU Power cord X ac power adapter X Bluetooth folio keyboard * X Lenovo Digital Pen * X Lenovo E-Color Pen * X * for selected models 32 User Guide Note: CRU replacement instruction is provided in one or more of the following publications and are available from Lenovo at any time upon your request. the product User Guide the printed publications that came with the product Chapter 4. Help and support 33 Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center. Before you contact Lenovo Record product information and problem details before you contact Lenovo. Product information Problem symptoms and details
• Product name • Machine type and serial number • What is the problem? Is it continuous or intermittent? • Any error message or error code? • What operating system are you using? Which version?
• Which software applications were running at the time of the problem? • Can the problem be reproduced? If so, how? Note: The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover. Lenovo Customer Support Center During the warranty period, you can call Lenovo Customer Support Center for help. Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to pcsupport.lenovo.com/supportphonelist. Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative. Services available during the warranty period • Problem determination - Trained personnel are available to assist you with determining if you have a hardware problem and deciding what action is necessary to fix the problem. • Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service. • Engineering change management - Occasionally, there might be changes that are required after a product has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes (ECs) that apply to your hardware available. Services not covered • Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts • Identification of software problem sources • Configuration of UEFI/BIOS as part of an installation or upgrade • Changes, modifications, or upgrades to device drivers • Installation and maintenance of network operating systems (NOS) • Installation and maintenance of programs For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product, see “Warranty information” in the Safety and Warranty Guide that comes with your computer. 34 User Guide Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at lenovo.com/services. Service availability and service name might vary by country or region. Chapter 4. Help and support 35 36 User Guide Appendix A. Important safety information Safety notices This information can help you safely use your computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Limited Warranty. For more information, see "Warranty Information" in the Safety and Warranty Guide that comes with your computer. Customer safety is important. Our products are developed to be safe and effective. However, personal computers are electronic devices. Power cords, power adapters, and other features can create potential safety risks that can result in physical injury or property damage, especially if misused. To reduce these risks, follow the instructions included with your product, observe all warnings on the product and in the operating instructions, and review the information included in this document carefully. By carefully following the information contained in this document and provided with your product, you can help protect yourself from hazards and create a safer computer work environment. Note: This information includes references to power adapters and batteries. In addition, some products (such as speakers and monitors) ship with external power adapters. If you have such a product, this information applies to your product. In addition, computer products contain a coin-sized internal battery that provides power to the system clock even when the computer is unplugged, so the battery safety information applies to all computer products. Important information about using your computer Ensure that you follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause the computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery. Extended contact with your body, even through clothing, could cause discomfort or even a skin burn. • Avoid keeping your hands, your lap, or any other part of your body in contact with a hot section of the computer for any extended time. • Periodically take hands from using the keyboard by lifting your hands from the palm rest. © Copyright Lenovo 2020 37 Protect yourself from the heat generated by the ac power adapter. When the ac power adapter is connected to an electrical outlet and your computer, it generates heat. Extended contact with your body, even through clothing, may cause a skin burn. • Do not place the ac power adapter in contact with any part of your body while it is in use. • Never use it to warm your body. • Do not wrap the cords around the ac power adapter while in use. Prevent your computer from getting wet. To avoid spills and the danger of electrical shock, keep liquids away from your computer. Protect the cables from being damaged. Applying strong force to cables may damage or break them. Route communication lines, or the cables of an ac power adapter, a mouse, a keyboard, a printer, or any other electronic device, so that they cannot be walked on, tripped over, pinched by your computer or other objects, or in any way subject to treatment that could interfere with the operation of your computer. Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive, do one of the following: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This helps to prevent damage to the computer, and possible loss of data. 38 User Guide Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices. Carry your computer carefully. • Use a quality carrying case that provides adequate cushioning and protection. • Do not pack your computer in a tightly packed suitcase or bag. • Before putting your computer in a carrying case, make sure that it is off, in sleep mode, or in hibernation mode. Do not put a computer in a carrying case while it is turned on. Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking, or hissing. These might merely mean that an internal electronic component has failed in a safe and controlled manner. Or, they might indicate a potential safety issue. Do not take risks or attempt to diagnose the situation yourself. Contact the Customer Support Center for further guidance. For a list of Service and Support phone numbers, see the following Web site: pcsupport.lenovo.com/supportphonelist Frequently inspect your computer and its components for damage or wear or signs of danger. If you have any question about the condition of a component, do not use the product. Contact the Customer Support Center or the product manufacturer for instructions on how to inspect the product and have it repaired, if necessary. In the unlikely event that you notice any of the following conditions, or if you have any safety concerns with your product, stop using the product and unplug it from the power source and telecommunication lines until you can speak to the Customer Support Center for further guidance. Appendix A. Important safety information 39 • Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are cracked, broken, or damaged. • Signs of overheating, smoke, sparks, or fire. • Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign substances on the battery. • A cracking, hissing, or popping sound, or strong odor that comes from the product. • Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord, or power adapter. • The computer product, power cord, or power adapter has been exposed to water. • The product has been dropped or damaged in any way. • The product does not operate normally when you follow the operating instructions. Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement. Service and upgrades Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or your documentation. Only use a Service Provider who is approved to repair your particular product. Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically are referred to as options. Replacement parts approved for customer installation are referred to as Customer Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for customers to install options or replace CRUs. You must closely follow all instructions when installing or replacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside a product are zero. Before you remove the covers from a product equipped with a power cord, always ensure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury, seek medical care immediately. Avoid contact with hot components inside the computer. During operation, some components become hot enough to burn the skin. Before you open the computer cover, turn off the computer, disconnect power, and wait approximately 10 minutes for the components to cool. After replacing a CRU, reinstall all protective covers, including the computer cover, before connecting power and operating the computer. This action is important to help prevent unexpected electrical shock and help ensure the containment of an unexpected fire that could happen under extremely rare conditions. 40 User Guide When replacing CRUs, be cautious of sharp edges or corners that might cause injury. If you suffer an injury, seek medical care immediately. Power cords and power adapters DANGER Use only the power cords and power adapters supplied by the product manufacturer. The power cords shall be safety approved. For Germany, it shall be H03VV-F, 3G, 0.75 mm2, or better. For other countries, the suitable types shall be used accordingly. Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard. Always route power cords so that they will not be walked on, tripped over, or pinched by objects. Protect power cords and power adapters from liquids. For instance, do not leave your power cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the power cord or power adapter has been stressed by misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector terminals on a power adapter, which can eventually result in overheating. Ensure that all power cord connectors are securely and completely plugged into receptacles. Do not use any power adapter that shows corrosion at the ac input pins or shows signs of overheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter. Do not use any power cords where the electrical contacts on either end show signs of corrosion or overheating or where the power cord appears to have been damaged in any way. To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings. Appendix A. Important safety information 41 Plugs and outlets DANGER If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician. Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement. Do not share an electrical outlet with other home or commercial appliances that draw large amounts of electricity; otherwise, unstable voltage might damage your computer, data, or attached devices. Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch circuit ratings. Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords. Be sure that the power outlet provides the correct voltage and current for the product you are installing. Carefully connect and disconnect the equipment from the electrical outlet. Power supply statement Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than Universal Serial Bus (USB) and 1394 cables while the computer power is on; otherwise, you might damage your computer. To avoid possible damage to attached devices, wait at least five seconds after the computer is shut down to disconnect external devices. 42 User Guide General battery notice DANGER Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a disassembled or modified battery is not covered by the warranty. Battery abuse or mishandling can cause overheating, liquid leakage, or an explosion. To avoid possible injury, follow these instructions: • Do not open, disassemble, or service any battery. • Do not crush or puncture the battery. • Do not short-circuit the battery, or expose it to water or other liquids. • Keep the battery away from children. • Keep the battery away from fire. Stop using the battery if it is damaged, or if you notice any discharge or the buildup of foreign materials on the battery leads. Store the rechargeable batteries or products containing rechargeable batteries at room temperature, with batteries charged to approximately 30%–50% of the full capacity. We recommend that the batteries be charged at least once per year to prevent over-discharging. Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations. Notice for built-in rechargeable battery DANGER Do not attempt to remove or replace the built-in rechargeable battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. Only recharge the battery strictly according to instructions included in the product documentation. The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations. Lithium coin-cell battery notice DANGER Danger of explosion if battery is incorrectly replaced. If the coin-cell battery is not a CRU, do not attempt to replace the coin-cell battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. Appendix A. Important safety information 43 The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations. When replacing the lithium coin-cell battery, use only the same type or equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Swallowing the lithium coin-cell battery will cause choking or severe internal burns in just two hours and might even result in death. Keep batteries away from children. If the lithium coin-cell battery is swallowed or placed inside any part of the body, seek medical care immediately. Do not: • Throw or immerse into water • Heat to more than 100 °C (212°F). • Repair or disassemble • Leave in an extremely low air pressure environment • Leave in an extremely high-temperature environment • Crush, puncture, cut, or incinerate Dispose of the battery as required by local ordinances or regulations. The following statement applies to users in the state of California, U.S.A. California Perchlorate Information: Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, see dtsc.ca.gov/hazardouswaste/ perchlorate/. Laser safety for the ToF sensor This device is classified as a Class 1 laser product per EN/IEC 60825-1:2014. This device complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. CAUTION: This device contains a laser that could be damaged during repair or disassembly, which could result in hazardous exposure to infrared laser emissions. There are no user serviceable parts with the device. Do not attempt to disassemble or service the device. 44 User Guide Heat and product ventilation DANGER Computers, ac power adapters, and many accessories can generate heat when turned on and when batteries are charging. Notebook computers can generate a significant amount of heat due to their compact size. Always follow these basic precautions: • When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. Avoid keeping your hands, your lap, or any other part of your body in contact with a hot section of the computer for any extended length of time. When you use the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time. Your computer generates some heat during normal operation. The amount of heat depends on the amount of system activity and the battery charge level. Extended contact with your body, even through clothing, could cause discomfort or even a skin burn. Periodically take breaks from using the keyboard by lifting your hands from the palm rest; and be careful not to use the keyboard for any extended length of time. • Do not operate your computer or charge the battery near flammable materials or in explosive environments. • Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features. • When the ac power adapter is connected to an electrical outlet and your computer, it generates heat. Do not place the adapter in contact with any part of your body while using it. Never use the ac power adapter to warm your body. Extended contact with your body, even through clothing, may cause a skin burn. For your safety, always follow these basic precautions with your computer: • Keep the cover closed whenever the computer is plugged in. • Regularly inspect the outside of the computer for dust accumulation. • Remove dust from vents and any perforations in the bezel. More frequent cleanings might be required for computers in dusty or high-traffic areas. • Do not restrict or block any ventilation openings. • Do not operate your computer inside furniture, as this might increase the risk of overheating. • Airflow temperatures into the computer should not exceed 35°C (95°F). Appendix A. Important safety information 45 Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet. • Connect properly wired outlets to any equipment that will be attached to this product. • Whenever possible, use one hand only to connect or disconnect signal cables. • Never turn on any equipment when there is evidence of fire, water, or structural damage. • Disconnect the attached power cords, battery, and all the cables before you open the device covers, unless instructed otherwise in the installation and configuration procedures. • Do not use your computer until all internal parts enclosures are fastened into place. Never use the computer when internal parts and circuits are exposed. DANGER Connect and disconnect cables as described in the following procedures when installing, moving, or opening covers on this product or attached devices.
To connect: 1. Turn everything OFF. 2. First, attach all cables to devices. 3. Attach signal cables to connectors. 4. Attach power cords to outlets. 5. Turn devices ON. To disconnect: 1. Turn everything OFF. 2. First, remove power cords from outlets. 3. Remove signal cables from connectors. 4. Remove all cables from devices.
The power cord must be disconnected from the wall outlet or receptacle before installing all other electrical cables connected to the computer. The power cord may be reconnected to the wall outlet or receptacle only after all other electrical cables have been connected to the computer. DANGER During electrical storms, do not perform any replacement and do not connect the telephone cable to or disconnect it from the telephone outlet on the wall. 46 User Guide Liquid crystal display (LCD) notice CAUTION: The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present after washing, get medical care. Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the fluorescent lamp in the liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws. Using headphones or earphones Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level. Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification limits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect against hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7 limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN 50332- 2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5 Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to excessive sound pressure levels. Choking hazard notice CHOKING HAZARD – Product contains small parts. Keep away from children under three years. Plastic bag notice DANGER Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation. Appendix A. Important safety information 47 Glass parts notice CAUTION: Some parts of your product may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove it. Stop using your product until the glass is replaced by trained service personnel. Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can damage the part. When you unpack an option or CRU, do not open the static-protective package containing the part until the instructions direct you to install it. When you handle options or CRUs, or perform any work inside the computer, take the following precautions to avoid static-electricity damage: • Limit your movement. Movement can cause static electricity to build up around you. • Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the edges. Never touch exposed circuitry. • Prevent others from touching components. • When you install a static-sensitive option or CRU, touch the static-protective package containing the part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body. • When possible, remove the static-sensitive part from the static-protective packaging and install the part without setting it down. When this is not possible, place the static-protective packaging on a smooth, level surface and place the part on it. • Do not place the part on the computer cover or other metal surface. 48 User Guide Appendix B. Accessibility and ergonomic information This chapter provides information about accessibility and ergonomics. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience. You also can get the most up-to-date accessibility information from the following Web site: lenovo.com/accessibility Keyboard shortcuts The following list contains keyboard shortcuts that can help make your computer easier to use. Note: Depending on your keyboard, some of the following keyboard shortcuts might not be available. • Windows logo key + U: Open Ease of Access Center • Right Shift for eight seconds: Turn on or turn off Filter Keys • Shift five times: Turn on or turn off Sticky Keys • Num Lock for five seconds: Turn on or turn off Toggle Keys • Left Alt+Left Shift+Num Lock: Turn on or turn off Mouse Keys • Left Alt+Left Shift+PrtScn (or PrtSc): Turn on or turn off High Contrast For more information, go to windows.microsoft.com/, and then search using any of the following keywords: keyboard shortcuts, key combinations, shortcut keys. Ease of Access Center Ease of Access Center on the Windows operating system enables you to configure your computers to suit their physical and cognitive needs. To access Ease of Access Center: 1. Go to Control Panel and view by Category. 2. Click Ease of Access ➙ Ease of Access Center. 3. Choose the appropriate tool by following the on-screen instructions. Ease of Access Center mainly includes the following tools: • Magnifier Magnifier is a useful utility that enlarges the entire screen or part of the screen so that you can see the items better. • Narrator Narrator is a screen reader that reads what is displayed on the screen aloud and describes events such as error messages. • On-Screen Keyboard If you prefer to type or enter data into your computer using a mouse, joystick, or other pointing device instead of a physical keyboard, you can use On-Screen Keyboard. On-Screen Keyboard displays a visual © Copyright Lenovo 2020 49 keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can tap to select the keys if your computer supports multi-touch screen. • High Contrast High Contrast is a feature that heightens the color contrast of some text and images on your screen. As a result, those items are more distinct and easier to identify. • Personalized keyboard Adjust keyboard settings to make your keyboard easier to use. For example, you can use your keyboard to control the pointer and make the keyboard easier to type certain key combinations. • Personalized mouse Adjust mouse settings to make your mouse easier to use. For example, you can change the pointer appearance and make your mouse easier to manage windows. Speech Recognition Speech Recognition enables you to control your computer by voice. You can use verbal instructions to control the keyboard and mouse. With verbal instructions, you can start programs, open menus, click objects on the screen, dictate text into documents, and write and send e-mails. To use Speech Recognition: 1. Go to Control Panel and view by Category. 2. Click Ease of Access ➙ Speech Recognition. 3. Follow the on-screen instructions. Screen-reader technologies Screen-reader technologies are primarily focused on software program interfaces, help systems, and various online documents. For additional information about screen readers, see the following: • Using PDFs with screen readers: adobe.com/accessibility.html?promoid=DJGVE • Using the JAWS screen reader: freedomscientific.com/Products/Blindness/JAWS • Using the NVDA screen reader: nvaccess.org/ Screen resolution You can make the text and images on your screen easier to read by adjusting the screen resolution of your computer. To adjust the screen resolution: 1. Right-click a blank area on the desktop and then click Display settings ➙ Display. 2. Follow the on-screen instructions. Note: Setting a resolution too low might prevent some items from fitting on the screen. Customizable item size You can make the items on your screen easier to read by changing the item size. • To change the item size temporarily, use the Magnifier tool in Ease of Access Center. • To change the item size permanently: 50 User Guide – Change the size of all the items on your screen. 1. Right-click a blank area on the desktop and then click Display settings ➙ Display. 2. Change the item size by following the on-screen instructions. For some applications, your configuration might not take effect until you sign out and then sign in again. – Change the size of the items on a Web page. Press and hold Ctrl, and then press the plus-sign key (+) to enlarge or the minus-sign key (–) to reduce the text size. – Change the size of the items on the desktop or a window. Note: This function might not work on some windows. If your mouse has a wheel, press and hold Ctrl, and then scroll the wheel to change the item size. Industry-standard connectors Your computer provides industry-standard connectors that enable you to connect assistive devices. Documentation in accessible formats Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text so that visually impaired users can understand the image when they use a screen reader. Ergonomic information Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort when using your computer. Working in the virtual office might mean adapting to frequent changes in your environment. Adapting to the surrounding light sources, active seating, and the placement of your computer hardware, can help you improve your performance and achieve greater comfort. This example shows someone in a conventional setting. Even when not in such a setting, you can follow many of these tips. Develop good habits, and they will serve you well. General posture: Make minor modifications in your working posture to deter the onset of discomfort caused by long periods of working in the same position. Frequent short breaks from your work also help to prevent minor discomfort associated with your working posture. Appendix B. Accessibility and ergonomic information 51 Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to 30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the brightness control keys to adjust display brightness. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position. Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to best suit your comfort posture. Arm and hand position: If available, use chair arm rests or an area on your working surface to provide weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys. Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest. What if you are traveling? It might not be possible to observe the best ergonomic practices when you are using your computer while on the move or in a casual setting. Regardless of the setting, try to observe as many of the tips as possible. Sitting properly and using adequate lighting, for example, helps you maintain desirable levels of comfort and performance. If your work area is not in an office setting, ensure to take special note of employing active sitting and taking work breaks. Many product solutions are available to help you modify and expand your computer to best suit your needs. You can find some of these options at lenovo.com/accessories. Explore your options for docking solutions and external products that provide the adjustability and features that you want. Questions about vision? The visual display screens of notebook computers are designed to meet the highest standards. These visual display screens provide you with clear, crisp images and large, bright displays that are easy to see, yet easy on the eyes. Any concentrated and sustained visual activity can be tiring. If you have questions on eye fatigue or visual discomfort, consult a vision-care specialist for advice. Turn on night light Night light is a switch in Windows that you can turn on and off. When it is turned on, your screen shows warmer colors and the amount of emitted blue light is reduced. Enabling night light reduces the chances of developing eye fatigue or eye strain. Step 1. Click the notification icon in the Windows notification area. Step 2. Click the Night light icon to turn it on or off. Note: Click Expand if you cannot find the night light icon. For more guidance on reducing eye fatigue or eye strain, go to lenovo.com/us/en/compliance/ visual-fatigue. 52 User Guide Appendix C. Compliance information This appendix provides the various compliance statements for Lenovo products. Radio frequency compliance statements Computer models equipped with wireless communications comply with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Besides this document, ensure that you read the Regulatory Notice for your country or region before using the wireless devices contained in your computer. European Union – compliance with the Radio Equipment Directive This product is in conformity with all the requirements and essential norms that apply to EU Council Radio Equipment Directive 2014/53/EU on the approximation of the laws of the Member States relating to radio equipment. The full text of the system EU declaration of conformity and the EU wireless module declarations are available at the following Internet addresses: • For notebook computers: lenovo.com/eu-doc-notebooks • For tablet computers: lenovo.com/eu-doc-tablets • For wireless peripheral devices: lenovo.com/eu-doc-wireless-options Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers. This product has been tested and found to comply with the limits for Class B equipment according to European Standards harmonized in the Directives in compliance. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices. FCC ID and IC ID location If you purchased your computer in the United States or Canada and the computer includes factory- preinstalled wireless modules, the FCC ID and IC ID label information for the wireless modules are visible on the computer’s bottom cover. The following graphic shows the location of the engraved (laser etched) text or the attached non-removable label. © Copyright Lenovo 2020 53 Brazil Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. This equipment is not protected against harmful interference and may not cause interference with duly authorized systems. Mexico Advertencia: En Mexico la operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. Singapore Korea 무선설비 전파 혼신 (사용주파수 2400∼2483.5 , 5725∼5825 무선제품해당) 해당 무선설비가 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음 SAR 정보 본 장치는 전파 노출에 대한 가이드라인을 충족합니다. 본 장치는 무선 송수신기 입니다. 본 장치는 국제 가이드라인으로 권장되는 전파 노출에 대한 제한을 초과하지 않도록 설계되었습니다. 장치 액세서리 및 최신 부품을 사용할 경우 SAR 값이 달라질 수 있 습니다. SAR 값은 국가 보고 및 테스트 요구 사항과 네트워크 대역에 따라 다를 수 있습니다. 본 장치 는 사람의 신체에서 20mm 이상의 거리에서 사용할 수 있습니다. Environmental information by countries and regions This section provides environmental, recycling, and RoHS information about Lenovo products. Recycling and environmental information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information about recycling Lenovo products, go to: lenovo.com/recycling The latest environmental information about our products is available at: lenovo.com/ecodeclaration 54 User Guide Important WEEE information The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for example, the European WEEE Directive, India E-Waste Management Rules). Appliances are labeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE). These regulations determine the framework for the return and recycling of used appliances as applicable within each geography. This label is applied to various products to indicate that the product is not to be thrown away, but rather put in the established collection systems for reclaiming these end of life products. Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to them for the return, recycling, and recovery of WEEE and to minimize any potential effects of EEE on the environment and human health due to the presence of hazardous substances. Lenovo electrical and electronic equipment (EEE) may contain parts and components, which at end-of-life might qualify as hazardous waste. EEE and waste electrical and electronic equipment (WEEE) can be delivered free of charge to the place of sale or any distributor that sells electrical and electronic equipment of the same nature and function as the used EEE or WEEE. For additional WEEE information, go to: lenovo.com/recycling WEEE information for Hungary Lenovo, as a producer, bears the cost incurred in connection with the fulfillment of Lenovo’s obligations under Hungary Law No. 197/2014 (VIII.1.) subsections (1)-(5) of section 12. Japan recycling statements Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at: lenovo.com/recycling/japan Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home- used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, go to: lenovo.com/recycling/japan Appendix C. Compliance information 55 Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor. Disposing of disused lithium batteries from Lenovo computers A button-shaped lithium battery is installed inside your Lenovo computer to provide power to the computer clock while the computer is off or disconnected from the main power source. If you need to replace it with a new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal operator, and follow their instructions. Disposal of a lithium battery must comply with local ordinances and regulations. Disposing of a disused battery from Lenovo notebook computers Your Lenovo notebook computer has a lithium ion battery or a nickel metal hydride battery. If you are a company employee who uses a Lenovo notebook computer and need to dispose of a battery, contact the proper person in Lenovo sales, service, or marketing, and follow that person's instructions. You also can refer to the instructions at: lenovo.com/jp/ja/environment/recycle/battery/ If you use a Lenovo notebook computer at home and need to dispose of a battery, you must comply with local ordinances and regulations. You also can refer to the instructions at: lenovo.com/jp/ja/environment/recycle/battery/ Recycling information for Brazil Declarações de Reciclagem no Brasil Descarte de um Produto Lenovo Fora de Uso Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de acordo com a legislação local. A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos. Caso você possua um produto Lenovo em situação de descarte, ligue para o nosso SAC ou encaminhe um e-mail para: email@example.com, informando o modelo, número de série e cidade, a fim de enviarmos as instruções para o correto descarte do seu produto Lenovo. Battery recycling information for the European Union 56 User Guide Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection. Disposing of lithium batteries and battery packs from Lenovo products A coin-cell type lithium battery might be installed inside your Lenovo product. You can find details about the battery in the product documentation. If the battery needs to be replaced, contact your place of purchase or contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your place of purchase or a waste-disposal operator, and follow their instructions. Disposing of battery packs from Lenovo products Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can find details on the battery pack in the product documentation. If you need to dispose of a battery pack, insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal operator, and follow their instructions. You also can refer to the instructions provided in the user guide for your product. For proper collection and treatment, go to: lenovo.com/lenovo/environment Recycling information for mainland China Appendix C. Compliance information 57 Battery recycling information for Taiwan Battery recycling information for the United States and Canada RoHS compliance statements Lenovo is committed to protecting the environment. An important priority for Lenovo is the implementation of RoHS (Restriction of Hazardous Substances) requirements globally. Lenovo meets all the RoHS requirements currently in effect. This section provides RoHS compliance statements by countries or regions. See lenovo.com/ecodeclaration for more information about Lenovo worldwide compliance on RoHS. European Union This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). Turkey The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE). Ukraine Цим підтверджуємо, що продукція Леново відповідає вимогам нормативних актів України, які обмежують вміст небезпечних речовин Mainland China 为满足中国电子电器产品有害物质限制相关的法律法规和其他要求,联想公司对本产品中有害物质按部件分 类,声明如下。 58 User Guide
Table 1. 产品中有害物质的名称及含量 部件名称 铅(Pb) 汞(Hg) 镉(Cd) 多溴二苯醚 (PBDE) 六价铬(CR (VI)) 六价铬(CR (VI)) 多溴联苯 (PBB) 多溴联苯 (PBB) 多溴联苯 (PBB)
在中华人民共和国境内销售的电子信息产品必须带有此“环保使用期限”(EPuP)标志。圆圈内的数字标 示正常使用状态下产品的环保使用期限。 Supplier’s declaration of conformity label for mainland China RoHS 依照《电器电子产品有害物质限制使用合格评定制度实施安排》,《绿色产品 标识使用管理办法》以及市场监 管总局关于明确电器电子产品有害物质限制使用合 格评定制度“供方符合性标志”的公告中对于合格评定标识的 相关要求,联想公司 针对纳入《电器电子产品有害物质限制使用达标管理目录》内的产品,使用自我声 明的 合格评定方式,并使用如下合格评定标识: Taiwan 單元Unit 限用物質及其化學符號 Restricted substances and its chemical symbols
鉛Lead (Pb) 汞 Mercury (Hg) 鎘 Cadmiu- m (Cd) 鎘 Cadmiu- m (Cd) 六價鉻 Hexavalent chromium (Cr +6) 六價鉻 Hexavalent chromium (Cr +6) 六價鉻 Hexavalent chromium (Cr +6) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE)
外殼 - ○ ○ ○ ○ ○ 電路板組件 - ○ ○ ○ ○ ○ Appendix C. Compliance information 59 印刷电路板组件* X ○ ○ ○ ○ ○ 硬盘 X ○ ○ ○ ○ ○ 光驱 X ○ ○ ○ ○ ○
LCD面板(LED背光 源) X ○ ○ ○ ○ ○
键盘 X ○ ○ ○ ○ ○ 内存 X ○ ○ ○ ○ ○ 电池 X ○ ○ ○ ○ ○ 电源适配器 X ○ ○ ○ ○ ○
底壳、顶壳和扬声 器 X ○ ○ ○ ○ ○
注:本表格依据SJ/T 11364的规定编制。某些型号的产品可能不包含表中的部分部件。 ○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下。 X:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。标记“X”的部件,皆因全球 技术发展水平限制而无法实现有害物质的替代。 *:印刷电路板组件包括印刷电路板及其零部件、电容和连接器等。 單元Unit 限用物質及其化學符號 Restricted substances and its chemical symbols
鉛Lead (Pb) 汞 Mercury (Hg) 鎘 Cadmiu- m (Cd) 鎘 Cadmiu- m (Cd) 六價鉻 Hexavalent chromium (Cr +6) 六價鉻 Hexavalent chromium (Cr +6) 六價鉻 Hexavalent chromium (Cr +6) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE)
機械部件 - ○ ○ ○ ○ ○ 顯示螢幕 - ○ ○ ○ ○ ○ 電源供應器 - ○ ○ ○ ○ ○ 儲存裝置 - ○ ○ ○ ○ ○ 輸入裝置 - ○ ○ ○ ○ ○ 配件 - ○ ○ ○ ○ ○ 備考1."超出0.1 wt %"及"超出0.01 wt %"係指限用物質之百分比含量超出百分比含量基準值。 Note 1:“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2. “○”係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3. “-”係指該項限用物質為排除項目。 Note 3: "-" indicates that the restricted substance corresponds to the exemption. 單元 說明 機械部件 泛指風扇、散熱器、喇叭、光碟機(選配)等 儲存裝置 泛指硬碟、固態硬碟、記憶體等 輸入裝置 泛指鍵盤、觸控板、攝影機、麥克風等 配件 泛指電源線組(選配)、觸控筆(選配)、耳機(選配)等 India RoHS compliant as per E-waste (Management) Rules. Electromagnetic emission notices Federal Communications Commission (FCC) Supplier’s Declaration of Conformity The following information refers to Yoga Duet 7 13IML05, machine types 82AS. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 60 User Guide determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using cables and connectors other than those recommended by Lenovo or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Lenovo (United States) Incorporated 7001 Development Drive Morrisville, NC 27560 Email: FCC@lenovo.com Industry Canada compliance statement CAN ICES-3(B)/NMB-3(B) European Union conformity EU Contact: Lenovo (Slovakia), Landererova 12, 811 09 Bratislava, Slovakia Compliance with the EMC Directive This product is in conformity with the protection requirements of EU Council Directive 2014/30/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility. This product has been tested and found to comply with the limits for Class B equipment according to European Standards harmonized in the Directives in compliance. The Class B requirements for equipment are intended to offer adequate protection to broadcast services within residential environments. German Class B compliance statement Hinweis zur Einhaltung der Klasse B zur elektromagnetischen Verträglichkeit Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie zur elektromagnetischen Verträglichkeit Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU- Mitgliedsstaaten und hält die Grenzwerte der Klasse B der Norm gemäß Richtlinie. Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden. Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Appendix C. Compliance information 61 Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne Empfehlung der Lenovo gesteckt/eingebaut werden. Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische Verträglichkeit von Geräten), bzw. der EU Richtlinie 2014/30/EU, der EU Richtlinie 2014/53/EU Artikel 3.1b), für Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart. Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Japan notice for ac power cord The ac power cord shipped with your product can be used only for this specific product. Do not use the ac power cord for other devices. Other compliance information This section provides other compliance information about Lenovo products. Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 5A992.c. It can be re-exported except to any of the embargoed countries in the EAR E1 country list. Lenovo product service information for Taiwan Taiwan precautionary vision statement 警語:使用過度恐傷害視力 注意事項: • 使用30分鐘請休息10分鐘。 62 User Guide • 未滿2歲幼兒不看螢幕,2歲以上每天看螢幕不要超過1小時。 Supplemental information for the Eurasian Union
Назначение персональный компьютер для личного и служебного использования, для передачи данных, с поддержкой различных профилей подключения (Wi-Fi, Bluetooth и пр.). Изготовитель Леново ПЦ ХК Лимитед, 23/Ф Линколн Хаус, Тайку Плэйс 979 Кингз Роуд, Куарри Бэй, Гонконг (Lenovo PC HK Limited, 23/F Lincoln House, Taikoo Place 979 King's Road, Quarry Bay, Hong Kong)
Страна производства Китай
Наименование и местонахождение уполномоченного изготовителем лица ООО «Леново (Восточная Европа/Азия)» 143401, Московская область, г. Красногорск, бульвар Строителей, дом 4, корпус 1, помещение VII, тел. +7 495 645 83 38, факс +7 495 645 78 77. Импортер Наименование, адрес импортера и информация для связи с ним указаны на этикетке* на упаковке продукции. *Согласно ГОСТ 2.601-2013 «Единая система конструкторской документации. Эксплуатационные документы», пункт 5.1, подпункт 5.1.2, этикетка является видом эксплуатационных документов. Дата изготовления (месяц и год) Указана на этикетке* на упаковке продукции, в графе Date (дата указана в формате год-месяц-дата). Для получения более подробной информации посетите веб-сайт: support.lenovo.com Единый знак обращения на рынке стран Таможенного союза Brazil audio notice
Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo. ENERGY STAR ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer products with the ENERGY STAR certified designation. Lenovo computers, if carry an ENERGY STAR mark, have been designed and tested to conform to the ENERGY STAR program requirements for computers as prescribed by the U.S. Environmental Protection Agency. For certified computers, an ENERGY STAR mark may be affixed to the product, the product packaging, or displayed electronically on the E-label screen or the power settings interface. By using ENERGY STAR compliant products and taking advantage of the power management features of your computer, you reduce the consumption of electricity. Reduced electrical consumption contributes to Appendix C. Compliance information 63 potential financial savings, a cleaner environment, and the reduction of greenhouse gas emissions. For more information about ENERGY STAR, go to energystar.gov Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, Lenovo has preset the following power-management features to take effect when your computer has been inactive for a specified length of time. Table 2. Balanced (when plugged into ac power) • Turn off the display: After 10 minutes • Put the computer to sleep: After 10 minutes 64 User Guide Appendix D. Notices and trademarks Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent programs covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. 8001 Development Drive Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. Changes are made periodically to the information herein; these changes will be incorporated in new editions of the publication. To provide better service, Lenovo reserves the right to improve and/or modify the products and software programs described in the manuals included with your computer, and the content of the manual, at any time without additional notice. The software interface and function and hardware configuration described in the manuals included with your computer might not match exactly the actual configuration of the computer that you purchase. For the configuration of the product, refer to the related contract (if any) or product packing list, or consult the distributor for the product sales. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. © Copyright Lenovo 2020 65 Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice. For the latest information or any questions or comments, contact or visit the Lenovo Web site: support.lenovo.com Trademarks LENOVO and the LENOVO logo are trademarks of Lenovo. Microsoft, Windows, OneDrive, Outlook, Skype, Office 365, Direct3D, and Cortana are trademarks of the Microsoft group of companies. Wi-Fi and Miracast are registered trademarks of Wi-Fi Alliance. USB-C is a trademark of USB Implementers Forum. All other trademarks are the property of their respective owners. © 2020 Lenovo. 66 User Guide
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL