LENOVO IDEAPAD S215 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD LENOVO IDEAPAD S215 (01) PDF MANUAL


PDF Content Summary: Lenovo IdeaPad S210/S210 Touch S215/S215 Touch Hardware Maintenance Manual Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 85. First Edition (May 2013) © Copyright Lenovo 2013. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclo sure is subject to restrictions set forth in Contract No. GS-35F-05925. © 2013 Lenovo

Contents About this manual........................................iv Safety information.........................................1 General safety ...................................................... 2 Electrical safety .................................................... 3 Safety inspection guide ...................................... 5 Handling devices that are sensitive to electrostatic discharge......................................... 6 Grounding requirements ................................... 6 Safety notices: multilingual translations.......... 7 Laser compliance statement............................. 14 Important service information ...................16 Strategy for replacing FRUs............................. 16 Strategy for replacing a hard disk drive .............................................................. 17 Important notice for replacing a system board ............................................................. 17 Important information about replacing RoHS compliant FRUs ................................................. 18 General checkout........................................19 What to do first .................................................. 20 Power system checkout .................................... 21 Checking the AC adapter........................... 21 Checking operational charging ................. 22 Checking the battery pack ......................... 22 Related service information.......................23 Restoring the factory contents by using Recovery Disc Set .............................................. 23 Start Recovery Disc (one disc) ................... 23 Operating System Recovery Disc (one or more discs) ................................................... 23 Applications and Drivers Recovery Disc (one or more discs)...................................... 23 Supplemental Recovery Disc..................... 23 Passwords........................................................... 24 Power-on password .................................... 24 Hard-disk password ................................... 24 Supervisor password .................................. 24 Power management .......................................... 25 Screen blank state ........................................ 25 Putting the computer to sleep or shutting it down ............................................................. 25 Lenovo S210/S210 Touch/S215/ S215 Touch..................................................27 Specifications ..................................................... 27 Status indicators ................................................ 29 Hotkeys............................................................... 31 FRU replacement notices ..................................32 Screw notices ................................................ 32 Removing and replacing an FRU .................... 33 1010 Battery pack......................................... 34 1020 Hard disk drive................................... 36 1030 DIMM ................................................... 38 1040 PCI Express Mini Card for wireless LAN/WAN .................................................. 39 1050 Fan assembly and Heat Sink assembly........................................................ 41 1060 Keyboard.............................................. 43 1070 System board .......................................45 1080 LCD unit............................................... 49 1090 Speakers, base cover, audio board, DC-IN board and power board ................. 51 1100 LCD front bezel................................... 55 1110 LCD panel, LCD cable and hinges ... 56 1120 Integrated camera ............................... 58 1130 Antenna assembly and LCD cover... 59 Locations ............................................................. 60 Front view..................................................... 60 Bottom and Left-side view ......................... 61 Right-side view ............................................ 62 Parts list............................................................... 63 Overall........................................................... 64 LCD FRUs ..................................................... 69 Keyboard....................................................... 71 AC adapters.................................................. 80 Screws............................................................ 80 Power cords .................................................. 81 Notices .........................................................85 Trademarks.........................................................86

iii About this manual This manual contains service and reference information for the following Lenovo product: Lenovo S210/S210 Touch/S215/S215 Touch Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16. iv Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe. • Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position. • Please remove covers and other parts in a safe place, away from all personnel, while you are servicing the machine. • Keep your toolcase away from walk areas so that other people will not trip it over. • Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it. • Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end. • Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing. Attention: Metal objects are good electrical conductors. • Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes. • After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. • Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. 2 Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock. • Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly. • Do not work alone under hazardous conditions or near the equipment that has hazardous voltages. • Disconnect all power before: – Performing a mechanical inspection – Working near power supplies – Removing or installing main units • Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine, and to lock the wall box in the off position. • If you need to work on a machine that has exposed electrical circuits, observe the following precautions: – Ensure that another person, familiar with the power-off controls, is near you. Attention: Another person must be there to switch off the power, if necessary. – Use only one hand when working with powered-on electrical equipment; keep the other hand in your pocket or behind your back. Attention: An electrical shock can occur only when there is a complete circuit. By observing the above rule, you may prevent a current from passing through your body. – When using testers, set the controls correctly and use the approved probe leads and accessories for that tester. – Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames. Observe the special safety precautions when you work with very high voltages; instructions for these precautions are in the safety sections of maintenance information. Be extremely careful when you measure the high voltages. • Regularly inspect and maintain your electrical hand tools for safe operational condition. • Do not use worn or broken tools and testers. • Never assume that power has been disconnected from a circuit. First, check it to make sure that it has been powered off. 3 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution: do not become a victim yourself. – Switch off the power. – Send the victim to get medical aid. 4 Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: • Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock) • Explosive hazards, such as a damaged CRT face or a bulging capacitor • Mechanical hazards, such as loose or missing hardware To determine whether there are any potential unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected. Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Turn off the computer. Disconnect the power cord. 3. Check the power cord for: a. A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground. b. The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables. 9. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with. 5 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here. 2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. • Wear a grounded wrist strap against your skin to eliminate static on your body. • Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. • Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices. • Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Notes: The use of a grounding system to guard against ESD damage is desirable but not necessary. – Attach the ESD ground clip to any frame ground, ground braid, or green wire ground. – When working on a double-insulated or battery-operated system, use an ESD common ground or reference point. You can use coax or connector outside shells on these systems. – Use the round ground prong of the ac plug on ac-operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. 6 Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts. Avant de remettre l’ordinateur sous tension après remplacement d’une unité en clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer un court-circuit. Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf Klappergeräusche geprüft werden. Metallteile oder splitter können Kurzschlüsse erzeugen. Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni siano nella corretta posizione e non siano sparse all’interno dell’elaboratore. Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori; eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi. Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden causar cortocircuitos eléctricos. 7 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. Certaines batteries de secours contiennent du nickel et du cadmium. Ne les démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre feu ou d’exploser. Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio. Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle. Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. 8 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau. Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. En effet, une batterie inappropriée risque de prendre feu ou d’exploser. Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas al sustituir la batería. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. 9 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie, d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau. Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile inappropriée risque de prendre feu ou d’exploser. Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato, smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi, incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. La batería de repuesto es una batería de litio y puede provocar incendios, explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado, ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga el contenido de sus celdas al agua. Deséchela tal como dispone la normativa local. 10 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes. Consultez un médecin si des symptômes persistent après le lavage. Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden anschließend ein Arzt aufgesucht werden. Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i sintomi dovessero permanere. Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido despues de lavarse. 11 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen. Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la parte inferiore della scheda invertitore. Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. Safety notice 7 DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la mise à la masse d’une batterie peut produire suffisamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves. Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu entzünden oder Verletzungen bei Personen hervorzurufen. Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in corto circuito o a massa può fornire corrente sufficiente da bruciare materiali combustibili o provocare ustioni ai tecnici di manutenzione. Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o con contacto a tierra puede producir la corriente suficiente como para quemar material combustible o provocar quemaduras en el personal. 12 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface. Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen, der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU entfernt wird. Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi di interconnessione. Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte cualquier cable de conexión entre dispositivos. 13 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products. If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note the following: CAUTION Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles aqui especificados pode resultar em perigosa exposição à radiação. Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites. Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann gefährliche Laserstrahlung auftreten. L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle specificate possono provocare l’esposizione a. El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí especificados puede provocar la exposición a radiaciones peligrosas. Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage device could result in exposure to hazardous laser radiation. There are no serviceable parts inside those drives. Do not open. 14 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz. Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder directement avec des instruments optiques, ou de vous exposer au rayon. Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente in den Laserstrahl sehen und den Strahlungsbereich meiden. Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai eszközökkel. Kerülje a sugárnyalábbal való érintkezést! Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio. Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el haz de luz. Evite la exposición directa al haz. 15 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Strategy for replacing a hard disk drive” on page 17 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site: support.lenovo.com. Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software. 16 Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect. Strategy for replacing a hard disk drive Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on the hard disk to be lost. Make sure that the customer has a current backup of the data before performing this action. Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten. Important notice for replacing a system board Some components mounted on a system board are very sensitive. Improper handling can cause damage to those components, and may cause a system malfunction. Attention: When handling a system board: • Do not drop the system board or apply any excessive force to it. • Avoid rough handling of any kind. • Avoid bending the system board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset. 17 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, replacement parts can also be non-compliant. In all cases if the original FRU parts are RoHS compliant, the replacement part must also be RoHS compliant. Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs. RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced with RoHS compliant ones, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used. Products marketed before June 2006 Products marketed after June 2006

Current or original part Replacement FRU Current or original part Replacement FRU

Non-RoHS Can be Non-RoHS Non-RoHS Can be RoHS Non-RoHS Can sub to RoHS RoHS Must be RoHS Must be RoHS Must be RoHS

Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order. 18 General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten. • Replace an FRU only with another FRU of the correct model. When you replace an FRU, make sure that the machine model and the FRU part number are correct by referring to the FRU parts list. • An FRU should not be replaced just because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing an FRU only when a problem recurs. If you suspect that an FRU is defective, clear the error logs and run the test again. If the error does not recur, do not replace the FRU. • Be careful not to replace a nondefective FRU. 19 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. The following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subjected to stress beyond normal use. Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list: The following are not covered under warranty: • LCD panel cracked from the application of excessive force or from being dropped • Scratched (cosmetic) parts • Distortion, deformation, or discoloration of the cosmetic parts • Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force • Damage caused by liquid spilled into the system • Damage caused by the improper insertion of a PC Card or the installation of an incompatible card • Improper disk insertion or use of an optical drive • Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels • Damaged or bent diskette eject button • Fuses blown by attachment of a nonsupported device • Forgotten computer password (making the computer unusable) • Sticky keys caused by spilling a liquid onto the keyboard • Use of an incorrect AC adapter on laptop products The following symptoms might indicate damage caused by nonwarranted activities: • Missing parts might be a symptom of unauthorized service or modification. • If the spindle of a hard disk drive becomes noisy, it may have been subjected to excessive force, or dropped. 20 General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer. If you suspect a power problem, see the appropriate one of the following power supply checkouts: • “Checking the AC adapter” on page 21 • “Checking operational charging” on page 22 • “Checking the battery pack” on page 22 Checking the AC adapter You are here because the computer fails only when the AC adapter is used. • If the power-on indicator does not turn on, check the power cord of the AC adapter for correct continuity and installation. • If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure:

Pin 1 2 2 1 Voltage (V DC) +20 0

Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo S210/S210 Touch/S215/S215 Touch” on page 27. Note: Noise from the AC adapter does not always indicate a defect. 21 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to 100% of its capacity. This protects the battery pack from being overcharged or from having a shortened life. To check your battery, move your cursor to the Power Meter icon in the icon tray of the Windows® taskbar and wait for a moment (but do not click it), and the percentage of battery power remaining is displayed. To get detailed information about the battery, double-click the Power Meter icon. Note: If the battery pack becomes hot, it may not be able to be charged. Remove it from the computer and leave it at room temperature for a while. After it cools down, reinstall and recharge it. 22 Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery Disc Set” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery Disc Set When the hard disk drive or solid state drive is replaced because of a failure, no product recovery program is on the new drive. In this case, you must use the Recovery Disc Set for the computer. Order the Recovery Disc Set and the drive at the same time so that you can recover the new drive with the pre-installed software when they arrive. The Recovery Disc Set consists of the following set of DVDs to restore the computer to the original factory configuration. Start Recovery Disc (one disc) This disc is used to format the hard disk drive and initiate the recovery process. Operating System Recovery Disc (one or more discs) This disc restores the Microsoft Windows operating system. Applications and Drivers Recovery Disc (one or more discs) This disc restores the pre-installed applications and drivers on the computer. Supplemental Recovery Disc This disc contains additional content, such as software for specific models and updates to the software that was preloaded on the computer. Not all recovery disc sets come with a Supplemental Recovery Disc. To restore the computer to the original factory configuration using the recovery disc set, do the following: 1. Insert the bootable Start Recovery Disc into the optical drive. 2. Start the computer. When the Lenovo logo comes up, immediately press F12; on the boot sequence menu, select the optical drive as the first boot-up device. The computer will boot from the Start Recovery Disc. Follow the on-screen instructions to begin the recovery process. 3. Read the license. If you agree with the terms, select I accept these terms and conditions and then click Next. 4. Insert the Operating System Recovery Disc when prompted and click Yes to begin the operating system recovery process. 5. Insert the Applications and Drivers Recovery Disc when prompted and then click OK to begin the applications and drivers recovery process. 6. If you have a Supplemental Recovery Disc, insert it when prompted and click Yes. If you do not have a Supplemental Recovery Disc, click No. 23 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual

Passwords 7. When all of the data has been copied from the last disc in the set, remove the disc and restart the computer. Note: The remainder of the recovery process is fully automated and no action is required by you. The computer will restart into the Windows desktop several times and you might experience periods when no activity is apparent on the screen for several minutes at a time. This is normal. 8. When the recovery process is complete, the Welcome to the Microsoft Windows screen is displayed. Follow the instructions on the screen to complete the Windows setup. As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered. Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted.

Power-on password A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted. Hard-disk password There are two hard-disk passwords (HDPs): + User HDP - for the user + Master HDP - for the system administrator, who can use it to get access to the hard disk drive even if the user has changed the user HDP Attention: If the user HDP has been forgotten, check whether a master HDP has been set. If it has, it can be used for access to the hard disk drive. If no master HDP is available, neither Lenovo nor Lenovo authorized service technicians provide any services to reset either the user or the master HDP, or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee. Supervisor password A supervisor password (SVP) protects the system information stored in the BIOS Setup Utility. The user must enter the SVP in order to get access to the BIOS Setup Utility and change the system configuration. Attention: If the SVP has been forgotten and cannot be made available to the servicer, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee. 24 Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing . To end screen blank state and resume normal operation, press . Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following: • Close the display panel. • Press the power button. • Open the charms bar, then select Settings → Power → Sleep. Attention: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data. To wake the computer, do one of the following: • Press any key on the keyboard. • Press the power button. 25 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer: • Open the charms bar, then select Settings . • Select Power → Shut down. 26 Lenovo S210/S210 Touch/S215/S215 Touch Lenovo S210/S210 Touch/S215/S215 Touch This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 27 • “Status indicators” on page 29 • “FRU tests” on page 31 • “FRU replacement notices” on page 32 • “Removing and replacing an FRU” on page 33 • “Locations” on page 60 • “Parts list” on page 63 Specifications The following table lists the specifications of the Lenovo S210/S210 Touch/ S215/S215 Touch: Table 1. Specifications Feature Description Processor See the system properties of your computer, you can do this as follows: Click Start, right-click Computer; then from the pull down menu select Properties. Core Chipset Intel Panther point HM70&HM 76 Graphic Chipset Intel Integrated Display 16:9 (1,366 × 768 pixels)

Standard memory DDR3L-1333/1600 8 GB SODIMM × 1

CMOS RAM 256 bytes Hard disk drive 2.5-inch, 7.0 mm Optical drive NA SSD 24G mSATA 27 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 1. Specifications (continued) Feature Description I/O ports HDMI port × 1 USB 2.0 × 1, USB 3.0 × 1 2 in 1 slot × 1 (MMC, SD) Audio Combo audio jack × 1 Speaker × 2 Built-in microphone Video HDMI port × 1 WLAN Intel Wifi 2 × 2 GN WWAN Intel WiMAX/Wifi 1 × 2 BGN Bluetooth only support BT&WIFI combo module Keyboard New Key Board Touch pad Two Button Touch Pad Integrated camera 640 × 480 pixels/1,280 × 720 pixels Battery Lithium-ion AC adapter 45 W Pre-installed operating system Win8/Win8 Pro/Linpus Lite/DOS 28 Lenovo S210/S210 Touch/S215/S215 Touch Status indicators The system status indicators below show the computer status: a b 29 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 2. Status indicators Symbol Indicator status Meaning On (solid white) The computer is powered on. Blinking The computer is in sleep mode. Off The computer is powered off. On (solid white) The battery has more than 20% charge. Solid amber The battery has between 5% and 20% charge. Fast blinking amber There is a problem with the battery or the battery connection. Slow blinking amber The battery is being charged. When battery charge reaches 20%, the blinking color changes to white. Slow blinking white The battery has between 20% and 80% charge and is still charging. When the battery reaches 80% charge, the light will stop blinking, but charging will continue until the battery is fully charged. 30 Lenovo S210/S210 Touch/S215/S215 Touch Hotkeys The hotkeys are located in the function key row of the keyboard.By pressing the appropriate hotkey, you can change system settings instantly. The following describes the function of each hotkey. Table 3. Hotkeys : Mutes/unmutes the sound. : Enables/disables airplane mode. : Decreases the volume level. : Switches the active program. : Increases the volume level. : Turns on/off the backlight of the display. : Closes the currently active window. : Projects to a connected display. : Refreshes the desktop or the currently active window. : Decreases display brightness.

: Enables/disables the touch pad and the touch pad buttons. : Increases display brightness.

31 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten. • Each one should be used only once. Do the following when you service this machine: • Keep the screw kit in your tool bag. • Remove screws carefully for reuse. • Use a torque screwdriver if you have one. Tighten screws as follows: • Plastic to plastic Turn an additional 90° after the screw head touches the surface of the plastic part: more than 90° (Cross-section) • Logic card to plastic Turn an additional 180° after the screw head touches the surface of the logic card: more than 180° (Cross-section) • Torque driver If you have a torque screwdriver , refer to the “Torque” column for each step. • Make sure that you use the correct screws. If you have a torque screwdriver, tighten all screws firmly to the torque shown in the table. Never use a screw that you removed. Use a new one. Make sure that all screws are tightened firmly. • Ensure torque screwdrivers are calibrated correctly following country specifications. 32 Lenovo S210/S210 Touch/S215/S215 Touch Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 32. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts. 5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure. 6. When removing the FRU, move it in the direction as given by the arrow in the figure. 7. To put the new FRU in place, reverse the removal procedures and follow any of the notes that pertain to replacement. For information about connecting and arranging internal cables, see “Locations” on page 60. 8. When replacing an FRU, use the correct screw as shown in the procedures. DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any of the interconnecting cables. Attention: After replacing an FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits. Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or using an electrostatic discharge (ESD) strap (P/N 6405959) to remove potential shock reasons. Note: The illustrations used in this section are of the Lenovo S215, unless otherwise stated. 33 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 1010 Battery pack DANGER • Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 1. Removal steps of battery pack Unlock the manual battery latch . Holding the spring-loaded battery latch in a b the unlocked position , remove the battery pack in the direction shown by the c arrow . a c b Open two rubber foot pads with a screw driver in the direction shown by arrows d e f , then remove two screws , nine screws .

f f f f f d e f e f d

f f

Step Screw (quantity) Color Torque P/N

a M2.5 × 5 mm, flat-head, nylok-coated (2) M2 × 4 mm, flat-head, nylok coated (9) Black Black/ Silver 1.85 kgfcm 1.35 kgfcm 90202948 90202954

34 Lenovo S210/S210 Touch/S215/S215 Touch Figure 1. Removal steps of battery pack (continued) Open the back cover along the device frame with a flat blade in the direction shown by arrows and then lift the back cover in the direction shown by arrow g. g 35 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 1020 Hard disk drive For access, remove this FRU: • “1010 Battery pack” on page 34 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or is in suspend mode. Figure 2. Removal steps of hard disk drive Remove the frame fixing screws . a a

a a a

Step Screw (quantity) Color Torque

a M2 × 4 mm, flat-head, nylok-coated (4) Black/ Silver 1.35 kgfcm

Take out the hard disk drive secured in a metal frame in the direction shown by arrow . b b 36 Lenovo S210/S210 Touch/S215/S215 Touch Figure 2. Removal steps of hard disk drive (continued) c Remove four screws and detach the metal frame from the hard disk drive. c c c c Step Screw (quantity) Color Torque P/N

c M3.0 × 3.0 mm, flat-head, nylok-coated (4) Black 2.85 kgfcm 90202950

When installing: Make sure that the HDD connector is attached firmly. 37 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 1030 DIMM For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 3. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the a direction shown by arrows , and then unplug the DIMM in the direction b shown by arrow . a a b When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and difficult to be moved. 38 Lenovo S210/S210 Touch/S215/S215 Touch 1040 PCI Express Mini Card for wireless LAN/WAN For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN a Disconnect the two wireless LAN cables (black,white) , and then remove the b screw . b a a a In step , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the direction shown by arrows. a Notes: wireless LAN card has 2 cables in step . a wireless LAN card in some models may have 3 cables in step . Step Screw (quantity) Color Torque

b M2.0 × 3.0 mm, flat-head, nylok-coated (1) Black 1.35 kgfcm

39 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN (continued) Remove the card in the direction shown by arrow . c c When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card. • In models with a wireless LAN card that has three antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the card. 40 Lenovo S210/S210 Touch/S215/S215 Touch 1050 Fan assembly and Heat Sink assembly For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 5. Removal steps of fan assembly and heat sink assembly a Loosen four screws , and remove the heat sink assembly. a a a a Unplug the fan connector in the direction shown by arrow , Loosen three b screws . c c c c b When installing: Make sure that the fan connector is attached firmly to the system board. Step Screw (quantity) Color Torque

a M2 × 3 mm, flat-head, nylok-coated (3) M2 × 5 mm, flat-head, nylok-coated (2) Black Black 1.35 kgfcm 1.85 kgfcm

41 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 5. Removal steps of fan assembly and heat sink assembly (continued) Lift the fan assembly in the direction shown by arrow . Be careful not to d damage the connector. d 42 Lenovo S210/S210 Touch/S215/S215 Touch 1060 Keyboard For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1050 Fan assembly and Heat Sink assembly” on page 41 Figure 6. Removal steps of keyboard Remove screws . a a a a a Step Screw (quantity) Color Torque

a M2.0 × 3.0 mm, flat-head, nylok-coated (4) Black 1.35 kgfcm

Push the back of the keyboard in the direction shown by arrows . b b b 43 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 6. Removal steps of keyboard (continued) Lift the keyboard a little , and then detach the connector in the direction c shown by arrows . d e c 4 5 When installing: Make sure that the FPC connector is attached firmly. 44 Lenovo S210/S210 Touch/S215/S215 Touch 1070 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 45 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 7. Removal steps of system board (continued) a Remove seven screws . a a

a a a a a

Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (7) Black 1.35 kgfcm a 46 Lenovo S210/S210 Touch/S215/S215 Touch Figure 7. Removal steps of system board (continued) d b Unplug DC-IN cable connector in the direction , speakers connector , e disconnect the LCD connector in the direction , USB board connector in the c f direction , detach power board connector in the direction , TP connector g in the direction . d e c f b g When installing: Make sure that all the connectors are attached firmly. 47 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 7. Removal steps of system board (continued) Remove the system board in the direction shown by arrow . h h c b a When installing: When attaching the system board to the base cover, adjust the placement of the USB, HDMI, RJ-45 ports as shown in , and make sure that they are attached to the holes on the base cover as shown. Improper placement of those jacks might cause a damage. 48 Lenovo S210/S210 Touch/S215/S215 Touch 1080 LCD unit For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 Figure 8. Removal steps of LCD unit a Remove four screws . a a a a Step Screw (quantity) Color Torque P/N

a M2.5 × 4 mm, flat-head, nylok coated (4) Black 1.85 kgfcm 90202952

When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. • Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 49 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 8. Removal steps of LCD unit (continued) Detach the LCD unit from the upper case. 50 Lenovo S210/S210 Touch/S215/S215 Touch 1090 Speakers, base cover, audio board, DC-IN board and power board For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 • “1080 LCD unit” on page 49 Figure 9. Speakers, base cover, audio board, DC-IN board and power board Remove four screws , and then remove the speakers in the direction shown a by arrows . b a a b a a b Step Screw (quantity) Color Torque P/N

a M2 × 1.7 mm, flat-head, nylok-coated (4) Black 1.35 kgfcm 90202949

51 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Figure 9. Speakers, base cover, audio board, DC-IN board and power board (continued) Remove screw , unplug the connector, then remove the DC-IN board in the a direction shown by arrow . b a b Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (1) Black 1.35 kgfcm b When installing: Make sure that the power connector is attached firmly. a Remove screw , and then remove the audio board in the direction shown by b arrow . a b Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (1) Black 1.35 kgfcm a 52 Lenovo S210/S210 Touch/S215/S215 Touch Figure 9. Speakers, base cover, audio board, DC-IN board and power board (continued) When installing: When attaching the audio board to the base cover, adjust the placement of the USB and headphone jacks as shown , and make sure that both of the USB and the headphone jacks are attached to the holes on the base cover. Improper placement of the jacks might cause a damage. Remove screw to lift the power board in the direction shown by arrow . a b a b Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (1) Black 1.35 kgfcm a Remove screws to lift the touch pad bracket in the direction shown by arrow a

b . a a b

Step Screw (quantity) Color Torque P/N

a M2 × 2.5 mm, flat-head, nylok coated (2) Black 1.35 kgfcm 90202951

53 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when you replace the base cover. For labels which are not shipped with the new base cover, peel them from the replaced base cover and adhere them to the new one. Note: If the Certificate of Authenticity (COA) label (b) is attached to a replaced part, return the replaced part to the customer, or provide a letter to the customer stating the original label part number, serial number, and product key. b c d a e f The following letter shows the correct location of each label. Not all labels are attached on the part you are servicing. Win8 GML label Wlan+BT label Indonesia label KCC label Rating label Print label 54 Lenovo S210/S210 Touch/S215/S215 Touch 1100 LCD front bezel For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 • “1080 LCD unit” on page 49 • “1090 Speakers, base cover, audio board, DC-IN board and power board” on page 51 Figure 10. Removal steps of LCD front bezel Remove the LCD front bezel in the direction shown by arrows . a

a a a a

55 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 1110 LCD panel, LCD cable and hinges For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 • “1080 LCD unit” on page 49 • “1090 Speakers, base cover, audio board, DC-IN board and power board” on page 51 • “1100 LCD front bezel” on page 55 Figure 11. LCD panel, LCD cable and hinges a Remove screws . a a a a Step Screw (quantity) Color Torque P/N

a M2 × 3 mm , flat-head, nylok coated (4) Black 1.35 kgfcm 90202953

56 Lenovo S210/S210 Touch/S215/S215 Touch Figure 11. LCD panel, LCD cable and hinges (continued) b Disconnect the connector , lift the LCD panel in the direction shown by arrow

. c b c

When installing: Make sure that the connector is attached firmly. a b Remove six screws and the hinges in the direction shown by arrows . a

b a a b a a a

Step Screw (quantity) Color Torque M2 × 3 mm , flat-head, nylok-coated (6) Black 1.35 kgfcm a 57 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 1120 Integrated camera For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 • “1080 LCD unit” on page 49 • “1090 Speakers, base cover, audio board, DC-IN board and power board” on page 51 • “1100 LCD front bezel” on page 55 • “1110 LCD panel, LCD cable and hinges” on page 56 Figure 12. Removal steps of integrated camera Note: The integrated camera is stuck on the top center of the LCD cover. a Disconnect the connector , remove the integrated camera from the LCD cover b in the direction shown by arrow . a b When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement of it to make sure the connector is attached firmly. 58 Lenovo S210/S210 Touch/S215/S215 Touch 1130 Antenna assembly and LCD cover For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1020 Hard disk drive” on page 36 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 39 • “1050 Fan assembly and Heat Sink assembly” on page 41 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 • “1080 LCD unit” on page 49 • “1090 Speakers, base cover, audio board, DC-IN board and power board” on page 51 • “1100 LCD front bezel” on page 55 • “1110 LCD panel, LCD cable and hinges” on page 56 Figure 13. Removal steps of antenna assembly and LCD cover Peel off the adhesive tapes securing the antenna boards, release the cables from the cable guide, and then remove the antenna assembly in the direction shown a by arrows . a a When installing: Route the antenna cables along the cable guides and secure the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. 59 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Locations Front view

a b c d e f g h a Integrated camera Wireless antennas Display Power button System status indicators Touch pad Built-in microphone Touch pad buttons

f h c d e b g

60 Lenovo S210/S210 Touch/S215/S215 Touch Bottom and Left-side view

a b c d e f g h i j USB 3.0 port HDMI port RJ-45 port Ventilation slots Novo button Battery latch -manual Battery pack Battery latch -spring loaded Ventilation slots Speakers j i j f g a b c h d e

61 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Right-side view

a b c d a b c d Combo audio jack Memory card slot USB port Power

62 Lenovo S210/S210 Touch/S215/S215 Touch Parts list This section presents the following service parts: • “Overall” on page 64 • “LCD FRUs” on page 69 • “Keyboard” on page 71 • “Miscellaneous parts” on page 79 • “AC adapters” on page 80 • “Power cords” on page 81 Notes: • Each FRU is available for all types or models, unless specific types or models are specified. 63 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual

Overall 1 3 5 6 8 9 11 12 13 14 16 18 20 2 4 7 a 10 b c 15 17 19 d

64 Lenovo S210/S210 Touch/S215/S215 Touch Table 4. Parts list—Overall No. FRU FRU no. CRU ID 1 LCD unit (see “LCD FRUs” on page 69.) 2 Keyboard (see “Keyboard” on page 71.) 3 S210 Upper Case Silver 90202932 N 3 S210TP Upper Case White 90202975 N

4 DDR3L 1600 2GB M471B5773DH0-YK0 2GB DDR3L 1600/SS M471B5773DH0-YK0 DDR3 1600 2GB 4 DDR3L 1600 2GB HMT425S6AFR6A-PB 2GB DDR3L 1600 11200502 ** 11201299 N

4 DDR3L 1600 2GB RMT3170ED58F8W-1600 11201835 N

4 DDR3L 1600 2GB MT8KTF25664HZ-1G6M1 2GB DDR3L 1600 11200346 *

4 DDR3L 1600 4GB M471B5273DH0-YK0 4GB DDR3L 1600 11200503 *

4 DDR3L 1600 4GB HMT451S6AFR8A-PB 4GB DDR3L 1600 4 DDR3L 1600 4GB RMT3170EB68F9W-1600 4GB DDR3L 1600 11201300 N 11201512 N

4 DDR3L 1600 4GB SM321NQ08ICF 4GB DDR3L 1600 11201834 N

4 DDR3L 1600 4GB MT8KTF51264HZ-1G6J1 4GB DDR3L 1600 4 DDR3L 1600 8GB M471B1G73BH0-YK0 8GB DDR3L 1600 4 DDR3L 1600 8GB HMT41GS6AFR8A-PB 8GB DDR3L 1600 11201342 N 11200504 N 11201301 N

4 DDR3L 1600 8GB SM322NW08IAF 8GB DDR3L 1600 11201514 N

4 DDR3L 1600 8GB MT16KTF1G64HZ-1G6E1 8GB DDR3L 1600 11201304 N

5 S210TP MB UMA HM76 I3-3227 90003190 N 5 S210TP MB W8S UMA HM76 I3-3227 90003191 N 5 S210TP MB W8P UMA HM76 I3-3227 90003192 N 5 S210TP MB UMA HM76 I3-3217 90003193 N 5 S210TP MB W8S UMA HM76 I3-3217 90003194 N 5 S210TP MB W8P UMA HM76 I3-3217 90003195 N 5 S210TP MB UMA HM76 2117U 90003196 ** 5 S210TP MB W8S UMA HM76 2117U 90003197 N 5 S210TP MB W8P UMA HM76 2117U 90003198 ** 5 S210TP MB UMA NM70 1007U 90003199 ** 5 S210TP MB W8S UMA NM70 1007U 90003200 ** 5 S210TP MB W8P UMA NM70 1007U 90003201 ** 5 S210TP MB UMA HM76 I3-2375 90003202 * 5 S210TP MB W8S UMA HM76 I3-2375 90003203 * 5 S210TP MB W8P UMA HM76 2375 90003204 * 5 S210TP MB UMA NM70 U987 90003205 ** 5 S210TP MB W8S UMA NM70 U987 90003206 ** 5 S210TP MB W8P UMA NM70 U987 90003207 * 5 S210TP MB UMA HM76 2127U 90003208 * 5 S210TP MB W8S UMA HM76 2127U 90003209 * 65 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 4. Parts list—Overall (continued) No. FRU FRU no. CRU ID 5 S210TP MB W8P UMA HM76 2127U 90003210 ** 5 S210TP MB UMA NM70 1037U 90003211 ** 5 S210TP MB W8S UMA NM70 1037U 90003212 ** 5 S210TP MB W8P UMA NM70 1037U 90003213 ** 5 S210TP MB UMA NM70 1037U 90003214 * 5 S210TP MB W8S UMA NM70 1017U 90003215 * 5 S210TP MB W8P UMA NM70 1017U 90003216 * 5 S210 MB UMA HM76 I3-3227U 90003154 * 5 S210 MB W8S UMA HM76 I3-3227U 90003155 * 5 S210 MB W8P UMA HM76 I3-3227U 90003156 * 5 S210 MB UMA HM76 I3-3217U 90003157 * 5 S210 MB W8S UMA HM76 I3-3217U 90003158 ** 5 S210 MB W8P UMA HM76 I3-3217U 90003159 ** 5 S210 MB UMA HM76 2117U 90003160 ** 5 S210 MB W8S UMA HM76 2117U 90003143 ** 5 S210 MB W8P UMA HM76 2117U 90003144 ** 5 S210 MB UMA NM70 1007U 90003161 ** 5 S210 MB W8S UMA NM70 1007U 90003145 ** 5 S210 MB W8P UMA NM70 1007U 90003146 ** 5 S210 MB UMA HM76 I3-2375U 90003162 * 5 S210 MB W8S UMA HM76 I3-2375U 90003163 ** 5 S210 MB W8P UMA HM76 I3-2375U 90003164 ** 5 S210 MB UMA HM76 987U 90003165 ** 5 S210 MB W8S UMA HM76 987U 90003166 * 5 S210 MB W8P UMA HM76 987U 90003167 * 5 S210 MB UMA HM76 2127U 90003168 ** 5 S210 MB W8S UMA HM76 2127U 90003169 * 5 S210 MB W8P UMA HM76 2127U 90003170 * 5 S210 MB UMA NM70 1037U 90003171 * 5 S210 MB W8S UMA NM70 1037U 90003172 * 5 S210 MB W8P UMA NM70 1037U 90003173 * 5 S210 MB UMA NM70 1017U 90003174 * 5 S210 MB W8S UMA NM70 1017U 90003175 * 5 S210 MB W8P UMA NM70 1017U 90003176 *

6 Ivy Bridge ULV Intel I3-3227U 1.9G 3M 2cBGA processor (Spring) 6 Ivy Bridge ULV Intel I3-3217U 1.8G L1 3M 2cBGA processor 102500490 * 102500313 *

6 Ivy Bridge ULV Intel 2117U 1.8G P0 2M 2cBGA processor 102500438 *

6 Ivy Bridge ULV Intel 1007U 1.5G 2M 2cBGA processor (Spring) 102500492 *

6 Ivy Bridge ULV Intel 2127U 1.9G 2M 2cBGA CPU 102500491 * 6 Ivy Bridge ULV Intel 1017U 1.6G 2M 2cBGA CPU 102500563 * 6 Ivy Bridge ULV Intel 1037U 1.8G 2M 2cBGA CPU 102500595 *

6 Intel Sandy Bridge ULV Intel I3-2375M 1.5G J1 3M 2cBGA processor (Spring) 102500518 *

66 Lenovo S210/S210 Touch/S215/S215 Touch Table 4. Parts list—Overall (continued) No. FRU FRU no. CRU ID

6 Intel Sandy Bridge ULV Intel 987 1.5G K0 2M 2cBGA processor 6 Processor Kabini Jaguar AMD A4-5000 1.5G 2M 4C A0 BGA APU 6 Processor Kabini Jaguar AMD E2-3000 1.65G 1M 2C A0 BGA APU 6 Processor Kabini Jaguar AMD E1-2500 1.4G 1M 2C A0 BGA APU 6 Processor Kabini Jaguar AMD E1-2100 1.0G 1M 2C A0 BGA APU 7 HDD 320G 5400rpm HTS545032A7E380 RV 7mm 5.4K 320G HDD 102500412 ** 102500533 ** 102500534 ** 102500535 ** 102500536 * 16200296 *

7 HDD 320G 5400rpm NA (QS not available) 16200274 * 7 HDD 320G 5400rpm ST320LT012 5.4K 7mm 320G HDD 16200212 *

7 HDD 500G 5400rpm WD5000LPVT-08G33T1 7mm 5.4K 500G HDD 7 HDD 500G 5400rpm HTS545050A7E380 RV 7mm 5.4K 500G HDD 16200264 * 16200297 *

7 HDD 500G 5400rpm NA (QS not available) 16200273 * 7 HDD 500G 5400rpm ST500LT012 5.4K 7mm 500G HDD 16200211 ** 7 HDD 1TB 5400rpm TBD TBD ** 7 SSHD 500GB+8G ST500LM000 6G 7mm 500G SSHD 16200391 ** 7 SSD 16G Ramaxel reserved SSD 16200500 ** 7 SSD 16G Liteon reserved SSD 16200480 ** 7 SSD 16G SanDisk SDSA6MM-016G NGFF 16G SSD 16200336 ** 7 S210 SDD Board 90003150 ** 8 S210 Fan 90202946 ** 9 S210 HeatSink 90202937 *

10 WLAN WiFi 2x2 BGN+BT4.0 Intel 7260BN 2x2BN+BT PCIE HMC WLAN 10 WLAN WiFi 1x1 BGN Cbt RT3090 MOW M PCIE NB HMC WLAN 10 WLAN WiFi 1x1 BGN Liteon HB125 1x1BGN HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Cbt BCM943142HM 1x1BGN+BT4.0 HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Liteon WB225 1x1BGN+BT4.0 HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Liteon WB335 1x1BGN+BT4.0 HMC WLAN 10 WLAN WiFi 2x2 ABGN+BT4.0 Cbt BCM943228HMB 2x2ABGN+BT4.0 HMC WLAN 10 WLAN WiFi 2x2 ABGN+BT4.0 Liteon WB222 2x2ABGN+BT4.0 HMC WLAN 20200412 ** 20002515 ** 20200223 * 20200222 * 20200224 ** 20200437 * 20200221 * 20200225 *

67 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 4. Parts list—Overall (continued) No. FRU FRU no. CRU ID

10 WLAN WiFi 1x1 BGN Cbt RT3090 MOW M PCIE NB HMC WLAN 10 WLAN WiFi 1x1 BGN Liteon HB125 1x1BGN HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Cbt BCM943142HM 1x1BGN+BT4.0 HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Liteon WB225 1x1BGN+BT4.0 HMC WLAN 10 WLAN WiFi 1x1 BGN+BT4.0 Liteon WB335 1x1BGN+BT4.0 HMC WLAN 20002515 * 20200223 * 20200222 * 20200224 * 20200437 *

11 S210 DC-IN Board 90003147 * 12 S210 DC-IN Cable 90202940 ** 13 S210 Audio Board 90003148 * 14 S210 Audio Board Cable 90202941 * 16 S210 Lower Case Black 90202933 * 16 S210TP Lower Case White 90202976 *

17 Battery 3cell 3S1P 10.8V 24Wh black S210 CP/S L12C3A01 10.8V24Wh 3cell bty 17 Battery 3cell 3S1P 10.8V 24Wh black S210 SP/L L12M3A01 10.8V24Wh 3cell bty 17 Battery 3cell 3S1P 10.8V 36Wh black S330 SY L12S3F01 10.8V36Wh 3cell bty 17 Battery 3cell 3S1P 10.8V 24Wh White S210 CP/S L12C3A01 10.8V24Wh 3cellWHTbty 17 Battery 3cell 3S1P 10.8V 24Wh White S210 SP/L L12M3A01 10.8V24Wh 3cellWHTbty 17 Battery 3cell 3S1P 10.8V 36Wh white S210 SY L12S3F01 10.8V36Wh 3cellWhitebty 121500169 * 121500170 * 121500185 * 121500187 * 121500188 * 121500189 *

18 S210 Speaker W/Cable 90202947 * 19 S210 Power Board 90003149 * 20 S210 RJ-45 Door Silver 90202936 * 20 S210TP RJ-45 Door White 90202977 * 68 Lenovo S210/S210 Touch/S215/S215 Touch LCD FRUs In Lenovo S210/S210 Touch/S215/S215 Touch, there are following types of LCDs. • “11.6 -in. HD TFT” 9 1 2 3

5 4 6 7 8

69 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual 11.6-in. HD TFT Table 5. Parts list—11.6-in. HD TFT No. FRU FRU no. CRU ID 1 S210 LCD Bezel Silver 90202931 N

2 Panel Anti-Glare type White LED panel CMI N116BGE L32 HD AG F LED1 NB LCD 2 Panel Anti-Glare type White LED panel SEC LTN116AT07-401 HD AG F LED1 NB LCD 2 Panel Anti-Glare type White LED panel IVO M116NWR1 R3 HD AG F LED1 NB LCD 2 Panel Anti-Glare type White LED panel AUO B116XW03 V1 HD AG F LED1 NB LCD 18200856 N 18200857 N 18200858 N 18200859 N

3 S210 LCD Hinge Left 90202944 N 4 S210 LCD Hinge Right 90202945 N 5 S210 LCD Cable 90202942 N 6 S210 Camera Board 1.0M 90003142 N 6 S210 Camera Board 0.3M 90003141 N 7 S210 LCD Cover Black 90202930 N 8 S210 Antenna*2 90202943 N 9 S210TP LCD Module Black 0.3M 90400136 N 9 S210TP LCD Module White 0.3M 90400137 N 9 S210TP LCD Module Black 1.0M 90400138 N 9 S210TP LCD Module White 1.0M 90400139 N 70 Lenovo S210/S210 Touch/S215/S215 Touch Keyboard Table 6. Parts list—Keyboard Language P/N CRU ID Indian 25210830 ** Czechoslovakian 25210828 Bulgarian 25210829 International English 25210827 Swiss 25210826 Slovenian 25210825 Icelandic 25210824 Belgian 25210823 Four Nordic countries 25210822 Hungarian 25210821 Hebrew 25210820 Greek 25210819 Dutch 25210818

keyboard S210 Chicony (black keyboard) Sunrex (black keyboard) Japanese 25210817 Brazilian 25210816 Arabic 25210815 German 25210814 French 25210813 Russian 25210812 Traditional Chinese 25210811 Korean 25210810 Canadian English&French 25210809 Latin 25210808 Portuguese 25210807 Thai 25210806 Turkish 25210805 Spanish 25210804 Italian 25210803 U.K. English 25210802 English 25210801 Indian 25210860 Czechoslovakian 25210858 Bulgarian 25210859 International English 25210857 Swiss 25210856 Slovenian 25210855 Icelandic 25210854 Belgian 25210853 Four Nordic countries 25210852 Hungarian 25210851 Hebrew 25210850 Greek 25210849 Dutch 25210848 Brazilian 25210846

71 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N CRU ID Arabic 25210845 ** German 25210844 French 25210843 Russian 25210842 Traditional Chinese 25210841

keyboard S210 (continued) Sunrex (black keyboard) (continued) Darfon (black keyboard) Korean 25210840 Canadian English&French 25210839 Latin 25210838 Portuguese 25210837 Thai 25210836 Turkish 25210835 Spanish 25210834 Italian 25210833 U.K. English 25210832 English 25210831 Indian 25210890 Czechoslovakian 25210888 Bulgarian 25210889 International English 25210887 Swiss 25210886 Slovenian 25210885 Icelandic 25210884 Belgian 25210883 Four Nordic countries 25210882 Hungarian 25210881 Hebrew 25210880 Greek 25210879 Dutch 25210878 Japanese 25210877 Brazilian 25210876 Arabic 25210875 German 25210874 French 25210873 Russian 25210872 Traditional Chinese 25210871 Korean 25210870 Canadian English&French 25210869 Latin 25210868 Portuguese 25210867 Thai 25210866 Turkish 25210865 Spanish 25210864 Italian 25210863 U.K. English 25210862 English 25210861

72 Lenovo S210/S210 Touch/S215/S215 Touch Table 6. Parts list—Keyboard (continued) Language P/N CRU ID Indian 25212151 ** Czechoslovakian 25212149 Bulgarian 25212150 International English 25212148 Swiss 25212147 Slovenian 25212146 Icelandic 25212145 Belgian 25212144 Four Nordic countries 25212143 Hungarian 25212142 Hebrew 25212141 Greek 25212140 Dutch 25212139 Japanese 25212138

keyboard S210 Touch Chicony (white) Sunrex (white) Brazilian 25212137 Arabic 25212136 German 25212135 French 25212134 Russian 25212133 Traditional Chinese 25212132 Korean 25212131 Canadian English&French 25212130 Latin 25212129 Portuguese 25212128 Thai 25212127 Turkish 25212126 Spanish 25212125 Italian 25212124 U.K. English 25212123 English 25212122 Indian 25212181 Czechoslovakian 25212179 Bulgarian 25212180 International English 25212178 Swiss 25212177 Slovenian 25212176 Icelandic 25212175 Belgian 25212174 Four Nordic countries 25212173 Hungarian 25212172 Hebrew 25212171 Greek 25212170 Dutch 25212169 Brazilian 25212167

73 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N CRU ID Arabic 25212166 ** German 25212165 French 25212164 Russian 25212163 Traditional Chinese 25212162 Korean 25212161

keyboard S210 Touch (continued) Sunrex (white) (continued) Dafon (white) Canadian English&French 25212160 Latin 25212159 Portuguese 25212158 Thai 25212157 Turkish 25212156 Spanish 25212155 Italian 25212154 U.K. English 25212153 English 25212152 Indian 25212211 Czechoslovakian 25212209 Bulgarian 25212210 International English 25212208 Swiss 25212207 Slovenian 25212206 Icelandic 25212205 Belgian 25212204 Four Nordic countries 25212203 Hungarian 25212202 Hebrew 25212201 Greek 25212200 Dutch 25212199 Japanese 25212198 Brazilian 25212197 Arabic 25212196 German 25212195 French 25212194 Russian 25212193 Traditional Chinese 25212192 Korean 25212191 Canadian English&French 25212190 Latin 25212189 Portuguese 25212188 Thai 25212187 Turkish 25212186 Spanish 25212185 Italian 25212184 U.K. English 25212183 English 25212182

74 Lenovo S210/S210 Touch/S215/S215 Touch Table 6. Parts list—Keyboard (continued) Language P/N CRU ID Indian 25210830 ** Czechoslovakian 25210828 Bulgarian 25210829 International English 25210827 Swiss 25210826 Slovenian 25210825 Icelandic 25210824 Belgian 25210823 Four Nordic countries 25210822 Hungarian 25210821 Hebrew 25210820 Greek 25210819 Dutch 25210818 Japanese 25210817

keyboard S210 Touch Chicony (Black) Sunrex (Black) Brazilian 25210816 Arabic 25210815 German 25210814 French 25210813 Russian 25210812 Traditional Chinese 25210811 Korean 25210810 Canadian English&French 25210809 Latin 25210808 Portuguese 25210807 Thai 25210806 Turkish 25210805 Spanish 25210804 Italian 25210803 U.K. English 25210802 English 25210801 Indian 25210860 Czechoslovakian 25210858 Bulgarian 25210859 International English 25210857 Swiss 25210856 Slovenian 25210855 Icelandic 25210854 Belgian 25210853 Four Nordic countries 25210852 Hungarian 25210851 Hebrew 25210850 Greek 25210849 Dutch 25210848 Brazilian 25210846

75 Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N CRU ID Arabic 25210845 ** German 25210844 French 25210843 Russian 25210842 Traditional Chinese 25210841 Korean 25210840

keyboard S210 Touch (continued) Sunrex Black (continued) Darfon (black) Canadian English&French 25210839 Latin 25210838 Portuguese 25210837 Thai 25210836 Turkish 25210835 Spanish 25210834 Italian 25210833 U.K. English 25210832 English 25210831 Indian 25210890 Czechoslovakian 25210888 Bulgarian 25210889 International English 25210887 Swiss 25210886 Slovenian 25210885 Icelandic 25210884 Belgian 25210883 Four Nordic countries 25210882 Hungarian 25210881 Hebrew 25210880 Greek 25210879 Dutch 25210878 Japanese 25210877 Brazilian 25210876 Arabic 25210875 German 25210874 French 25210873 Russian 25210872 Traditional Chinese 25210871 Korean 25210870 Canadian English&French 25210869 Latin 25210868 Portuguese 25210867 Thai 25210866 Turkish 25210865 Spanish 25210864 Italian 25210863 U.K. English 25210862 English 25210861

76


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply