LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 (01) PDF Document

The front of your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 features the following components:

The base of your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 includes the following components:

The left side of your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 has the following ports and controls:

The right side of your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 has the following ports and controls:

The specifications for the LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 are as follows. Note that some specifications are model-specific and might not apply to your specific model.

* for selected models

Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.

Maximum altitude (without pressurization)

3048 m (10 000 ft)

Temperature

Operating: 5°C to 35°C (41°F to 95°F)

Storage: 5°C to 43°C (41°F to 109°F)

Note: When you charge the battery, its temperature must be no lower than 10°C (50°F).

Relative humidity

Operating: 8% to 95% at wet-bulb temperature 23°C (73°F)

Storage: 5% to 95% at wet-bulb temperature 27°C (81°F)

The USB Type-C connector on your Chromebook works as the power connector. Plug in the ac power adapter to charge the built-in battery pack and provide power to the Chromebook.

CAUTION: All plugs must be firmly and securely inserted into receptacles.

1. Connect the power cord to the ac power adapter.

2. Plug the power adapter into the USB Type-C connector of the Chromebook.

3. Plug the power cord into an electrical outlet.

The ac power status indicator is next to the USB Type-C connector. The following table shows the indicator behaviors and the indicated power and battery status.

You can lock your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 to a desk, table, or other fixtures through a compatible security cable lock. The slot supports cable locks that conform to the Kensington NanoSaver® lock standards using Cleat™ locking technology. You are responsible for evaluating, selecting, and implementing the locking device and security feature.

To connect your Chromebook to Wi-Fi:

1. Click your account picture.

2. Click the network icon and turn on the wireless feature.

3. Select an available network to connect. Provide required information if needed.

Your LENOVO IDEAPAD FLEX 3I CHROMEBOOK 12IAN8 1 display can be rotated to any angle up to 360 degrees. It features the following four modes:

Attention:

Do not rotate the computer display with too much force, or apply too much force to the upper-right or upper-left corner of the computer display. Otherwise, the computer display or hinges might get damaged.

The keyboard and the pointing devices are automatically disabled in stand mode, tent mode, and tablet mode. Use the touch screen to control your computer instead.

YOGA Modes:

Notebook mode: The standard laptop configuration.

Stand mode: The screen is flipped back, with the keyboard facing down, propping up the display.

Tent mode: The device is stood up like an inverted ‘V’.

Tablet mode: The screen is folded back completely against the bottom of the keyboard.

The function keys and key combinations on the keyboard help you work more easily and effectively.

Hotkey Functions:

Key Combinations:

* for selected models

To change the keyboard settings:

1. Click the setting icon in the system tray, and then click Device → Keyboard.

2. Follow the on-screen instructions to change the settings as you prefer.

The entire touchpad surface is sensitive to finger touch and movement. You can use the touchpad to perform all the pointing, clicking, and scrolling functions of a traditional mouse.

Notes:

When using two or more fingers, ensure that you position your fingers slightly apart.

Some gestures are only available when you are using certain apps.

If the touchpad surface is stained with oil, turn off the Chromebook first. Then, gently wipe the touchpad surface with a soft and lint-free cloth moistened with lukewarm water or computer cleaner.

Touch Gestures:

Tap once: Select or open an item.

Tap twice quickly: Display a shortcut menu.

Two-finger pinch: Zoom in or zoom out.

Two-finger slide up/down: Scroll through items.

Three-finger slide up: Open the task view.

Three-finger slide down: Show the current window.

If Enable tap-to-click is turned on, you can tap or press the touchpad. Otherwise, you can only press the touchpad to achieve the clicking function of a traditional mouse.

To change the settings:

1. Click the setting icon in the system tray, and then click Device → Touchpad.

2. Follow the on-screen instructions to change the settings as you prefer.

The built-in camera can be used for video calling or video conferencing. The indicator next to the camera turns on when the camera is activated.

To take photos with the camera:

1. Click the Launcher button, and then click All apps.

2. Click Camera.

3. Click the camera icon.

You can connect headphones or a headset with a 3.5-mm (0.14-inch), 4-pole plug to the audio connector to listen to the sound from your Chromebook.

To play a saved audio or video:

1. Click the Launch button, and then select Files.

2. Double-click a file to open it in the media player.

To adjust the volume, click the account picture, and then adjust the volume as you prefer.

You can use the Chromebook’s USB Type-C connectors to connect a projector or an external display.

1. Use a USB Type-C to USB Type-C cable (not supplied) to connect your Chromebook to an external display.

Note: If the external display does not support input through a USB Type-C connector, you may need to purchase and use adapters.

2. Connect the external display to an electrical outlet.

3. Turn on the external display.

To change display settings:

1. Click your account picture, and then click Settings.

2. In the Device section, click Displays.

3. Follow the on-screen instructions to change the display settings as you desire.

Your Chromebook supports the Bluetooth feature. You can connect your Chromebook to a Bluetooth keyboard, mouse, speakers, or other Bluetooth devices.

Note: The Bluetooth devices must be within a short distance, usually 10 meters (33 feet), from the Chromebook.

1. Click your account picture, and then click the Bluetooth icon.

2. Turn on Bluetooth.

3. Select the device you want to pair and follow the on-screen instructions.

For ENERGY STAR® compliant Chromebooks, the following power plan takes effect when your Chromebook has been idle for a specified duration:

Default power plan (when plugged into ac power)

Turn off the display: After seven minutes and 30 seconds

Put the Chromebook into sleep: After eight minutes and 30 seconds

To reset the power plan to achieve the best balance between performance and power saving:

1. Click the setting icon in the system tray, and then click Device → Power.

2. Follow the on-screen instructions to change the settings as you prefer.

1. Press and hold the power button until the Chromebook turns off. Then, restart the Chromebook.

2. If step 1 does not work:

For models with an emergency reset hole: Insert a straightened paper clip into the emergency reset hole to cut off power supply temporarily. Then, restart the Chromebook with ac power connected.

For models without an emergency reset hole:

For models with a removable battery, remove the removable battery and disconnect all power sources. Then, reconnect to ac power and restart the Chromebook.

For models with a built-in battery, disconnect all power sources. Press and hold the power button for about seven seconds. Then, reconnect to ac power and restart the Chromebook.

1. Carefully unplug the ac power adapter and turn off the Chromebook immediately. The more quickly you stop the current from passing through the Chromebook the more likely you will reduce damage from short circuits.

Attention: Although you might lose some data or work by turning off the Chromebook immediately, leaving the Chromebook on might make your Chromebook unusable.

2. Do not try to drain out the liquid by turning over the Chromebook. If your Chromebook has keyboard drainage holes on the bottom, the liquid will be drained out through the holes.

3. Wait until you are certain that all the liquid is dry before turning on your Chromebook.

1. Squeeze out excess liquid from wipe or disinfecting cloth before using. Recommended wipes are hydrogen peroxide wipes and alcohol based wipes. Do not use wipes containing sodium hypochlorite (bleach).

2. Gently wipe the Chromebook thoroughly, being careful to ensure no liquid drips into the Chromebook. Do not wipe on connector pins.

3. After disinfecting, follow the cleaning procedure from the wipe supplier to minimize chemical buildup of disinfectant residue.

4. Always allow the Chromebook to completely dry prior to any use.