LEAPFROG LF930-2HD (01) PDF MANUAL

The package contains the following items:

• Parent Viewer

• Baby Unit (x2 for LF930-2HD)

• Parent Viewer Power Adapter

• Baby Unit Power Adapter (x2 for LF930-2HD)

• Wall mount bracket

• Parent Guide

You can download the free LeapFrog Baby Care mobile app by searching for “LeapFrog Baby Care” on the Apple App Store or Google Play Store.

App Compatibility:

• Android™ 6.0 or later

• iOS 12.0 or later

Connect the power adapters firmly into the Baby Unit and the Parent Viewer, and then plug them into wall outlets that are not controlled by a wall switch. This will power the units.

Notes:

• Before using the baby monitor for the first time, charge the Parent Viewer battery for 12 hours. When the Parent Viewer battery is fully charged, the battery icon becomes solid.

• The standby time varies depending on your actual usage time and the age of the battery.

The battery icon on the screen indicates the battery status:

1. To power on the Baby Unit: Slide the On/Off switch to ON. The POWER LED Light, which is off by default, will not light up.

2. To power on the Parent Viewer: Press and hold the power button until the welcome screen appears.

To power off the units, simply reverse the process.

Once your Baby Unit and Parent Viewer are powered on and connected, your Parent Viewer displays video from the Baby Unit, and the LINK LED light turns on.

Positioning:

• Keep the Baby Unit more than 3 feet (1 meter) away from your baby.

• To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, mobile phones, and computers.

Caution: The default volume of your Parent Viewer is level 3, and the maximum volume is level 5. If you experience a screeching noise from your baby monitor while positioning:

• Make sure your Baby Unit and Parent Viewer are more than 3 feet (1 meter) apart, OR

• Lower the volume of your Parent Viewer.

Cable Management:

Ensure that the cords of the baby monitor are managed to prevent strangulation hazards. Keep cords out of the reach of children.

1. Link LED light

2. Battery LED light

3. 3-level sound indicator light

4. Night Mode quick set key: Select black-and-white or color night vision viewing mode. Adjust night light brightness.

5. Arrow Keys

6. Menu / Select

7. Talk / Return

8. VOL – / VOL + : View the volume adjustment bar.

9. Zoom

10. Power / LCD Off

11. Microphone

12. Antenna

13. Power jack

14. RESET

15. Stand

1. Light sensor

2. Camera

3. Infrared LEDs

4. Microphone

5. Night light

6. Night light control key: Press to turn the night light on or off. Press and hold to adjust night light brightness level.

7. POWER LED Light

8. On/Off switch

9. Speaker

10. Antenna

11. Power jack

12. Wall mount holes

13. PAIR key: The Parent Viewer and Baby Unit(s) provided are already paired.

From the main menu, you can select one of the following viewing modes:

• Single mode: View one Baby Unit at a time.

• Patrol mode: The Parent Viewer display cycles through all paired Baby Units.

• Split screen: View all paired Baby Units at the same time on a split screen.

From the main menu, select the Night Light icon to access these options:

• Turn on/off night light.

• Select a night light color.

• Adjust brightness.

• Set a Timer to turn the night light off.

From the main menu, select the Lullaby icon to access these options:

• Play/Stop lullaby.

• Select to play all melodies, or play one of the 5 melodies and 5 soothing sounds.

• Set a Timer to stop the lullaby.

• Set the lullaby volume.

From the main menu, select the Detection icon to access these options:

• Select the sound and motion sensitivity level.

• Turn on/off sound and motion detection alerts.

• Turn on/off Auto Wake-up feature.

• Turn on/off Temperature Alert.

• Select the minimum and maximum Temperature range.

• Change the Temperature display format (Fahrenheit or Celsius).

From the main menu, select the Parent Unit settings icon to access these options:

• Adjust Parent Unit screen brightness.

• Turn on/off Low Battery Alert Tone.

• Turn on/off No Link Alert Tone.

• Turn on/off Dim Mode.

From the main menu, select the Baby Unit settings icon to access these options:

• Parking Mode: Folds the camera and disables audio/video transmission for privacy.

• LED Status: Turn the status indicator light on the Baby Unit on or off.

• Baby Unit’s speaker volume: Adjust the volume of the speaker on the Baby Unit.

• Security Key: A key for secure connection.

From the main menu, select the General settings icon to access these options:

• Configure Wi-Fi: Set up or change the Wi-Fi network connection.

• Connect Mobile Device: Set up pairing with a mobile device via the app.

• Reset Settings: Reset the monitor to its factory default settings.

• Direct mode: Parent unit and baby unit(s) are connected directly.

• Wi-Fi Router mode: Parent unit and baby unit(s) are connected to the home Wi-Fi network.

• Patrol mode: Baby units are being viewed in Patrol mode (*For LF930-2HD Only).

• Split mode: Baby units are being viewed in Split mode (*For LF930-2HD Only).

• B/W night vision: Black and white night vision is turned on.

• Color night vision: Color night vision is turned on.

• Motion detection alert: Motion detection alert is turned on.

• Lullaby: Melodies and soothing sounds are playing.

• Night light: Night light is turned on.

• Auto night light brightness: This feature is activated.

• Mute: Parent unit is muted.

• Temperature alert: Temperature alert is turned on.

• Humidity: Displays current humidity level.

• Temperature: Displays current temperature.

• Battery indicator: Shows the Parent Unit’s battery level.

Direct mode

The Parent Viewer and the Baby Unit are pre-paired and can connect to each other directly in Direct mode by default, which allows you to stream live video right out of the box.

Wi-Fi Router mode

Router mode uses your home Wi-Fi network to connect your baby monitor system. It enhances your local access by extending connection range.

With the LeapFrog mobile app, your Wi-Fi router (not included) also provides Internet connectivity to your baby monitor system, allowing you to control your Baby Unit wherever you are for mobile access.

If you plan to install your Baby Unit in a designated location and will use your home Wi-Fi network to connect your video monitor, you should test whether your selected monitoring areas have good Wi-Fi signal strength.

To do this, adjust the direction and distance between your Baby Unit, Parent Viewer, and Wi-Fi router until you have identified a suitable location with a good connection.

Ensure your wireless connection is secure

Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES” setting in your router’s wireless security menu.

Change default settings

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

– Is at least 10 characters long.

– Is complex.

– Does not contain dictionary words or personal information.

– Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date

Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates.

Disable Universal Plug and Play (UPnP) on your router

UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network.

Designed to give you extra peace of mind, Parking Mode can be used for a moment of privacy. When turned on, the Baby Unit will fold into the parking position and disable its camera’s audio transmission and video monitoring. In Parking Mode, motion recording, motion detection, and sound detection will be temporarily unavailable.

To Activate Parking Mode:

1. Press MENU to enter the main menu.

2. Go to Baby Unit Settings.

3. Press to highlight Parking Mode, then press MENU to toggle the switch on.

To deactivate Parking Mode and resume normal operation, press the power button on the Parent Unit.

This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the Parent Viewer is paired to Baby Units, the CEC battery charging testing mode is activated while it is powered off and charging.

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the Baby Unit at a height above 2 meters.

4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby.

5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the Parent Viewer.

7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product.

8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

10. Unplug this product from the wall outlet before cleaning.

11. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.

13. This product should be operated only from the type of power source indicated on the marking label.

14. Do not overload wall outlets or use an extension cord.

15. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

16. This product should not be placed in any area where proper ventilation is not provided.

17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit.

18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility.

19. You should test the sound reception every time you turn on the units or move one of the components.

20. Periodically examine all components for damage.

21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time.

22. Children should be supervised to ensure that they do not play with the product.

23. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.