Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** INSTALLATION INSTRUCTIONS Model 091-32-029( )-XX, 2 Relay Board The 091-32-029( )-XX Relay Board contains 2 relays mounted in a single assembly along with indicating LED’s and suppression diodes across each relay coil. The as- sembly is available for either 12 or 24 volt systems and for operation by supplying +12 volts to the relay or by grounding the relay. The table below outlines the part numbers, voltages and wiring configuration. Installation is simple and consists of mounting the base in a suitable location. The common terminal is connected to either the vehicle Ground or to + voltage dependng on the model. Inputs are supplied to the other two inputs. When the relays are ener- gized the adjacent LED lights. The relays have 30 amp contacts which are accessible through 1/4 inch quick disconnect terminals. Both normally open and normally closed contacts are provided for complete circuit flexibility. Part Number 091-32-029N-12 091-32-029P-12 091-32-029P-24 Voltage + 12 Volts + 12 Volts + 24 Volts + 24 Volts Common Connection + 12 Volts Ground + 24 Volts Ground Input to Operate Ground + 12 Volts Ground + 24 Volts RELAY LOAD CONTACTS, TYPICAL CONNECT LOADS AS REQUIRED LOAD NOT TO EXCEED 30 AMPERES RELAY LOAD CONTACTS, TYPICAL CONNECT LOADS AS REQUIRED LOAD NOT TO EXCEED 30 AMPERES z RELAY 1 OSI RELAY 2 RELAY 1 RI ost “P” Assembly RELAY 2 DS2 + VOLTS “N” Assembly SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS KUSSMAUL ELECTRONICS COMPANY, INC. 170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA Phone: 631 567-0314, Toll Free: 800 346-0857, Fax: 631 567-5826, E-Mail: email@example.com, Web: kussmaul.com File: 091-32-029( )-XX.pmd Date: March 23, 20071 MFG
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL