KURYAKYN 6967 (01) Image

FREE ENGLISH KURYAKYN 6967 (01) PDF DOCUMENT.
FREE ENGLISH KURYAKYN 6967 (01) PDF USER GUIDE.
FREE ENGLISH KURYAKYN 6967 (01) PDF USER MANUAL.
FREE ENGLISH KURYAKYN 6967 (01) PDF OWNER GUIDE.
FREE ENGLISH KURYAKYN 6967 (01) PDF OWNER MANUAL.
FREE ENGLISH KURYAKYN 6967 (01) PDF REFERENCE GUIDE.
FREE ENGLISH KURYAKYN 6967 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH KURYAKYN 6967 (01) PDF REFERENCE MANUAL.
FREE ENGLISH KURYAKYN 6967 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH KURYAKYN 6967 (01) PDF OPERATING INSTRUCTIONS.


CLICK HERE TO DOWNLOAD KURYAKYN 6967 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

What safety precautions should I take when installing and using the KURYAKYN 6967?

Protect yourself and others from potential injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation, use, and care of this product.


Are there any important notices to be aware of before installing the KURYAKYN 6967?

This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality or damage the product itself or the product to which it is being attached.

Ensure proper adhesion of this product. Remove all grease, oil, bugs, dirt, and other debris (including wax and polish) from the installation area. Kuryakyn will not provide warranty coverage on products or components lost or damaged due to improper installation.

Do not attempt this installation in temperatures below 50°F (10° C). Proper adhesive bonding ONLY occurs above 50°F (10°C).


What parts are included in the KURYAKYN 6967 kit?

1 Stereo Accent

1 Stereo Bezel

1 Alcohol Pad

1 Installation Instructions


What additional items will I need to install the KURYAKYN 6967?

You will also need warm, soapy water and a clean rag, masking or painter’s tape, and a marker.


How do I install the KURYAKYN 6967 Stereo Trim?

STEP 1: Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn IGN OFF.

STEP 2: Using warm soapy water and a clean rag, remove all dirt and debris from the installation area; allow the area to dry completely. Then, wipe the installation area with the included alcohol pad to remove any wax or polish; allow the area to dry completely.

STEP 3: Test fit the Accent and Bezel. Use masking tape to make alignment marks; remove the Accent and Bezel.

STEP 4: Use your fingernail to rub the adhesive backing; this will activate the adhesive. Remove and discard the backing.

STEP 5: Align the Bezel; press into place for one minute. Full bonding will occur after 24 hours. Remove and discard the masking tape.

STEP 6: Repeat for the other Accent.


What should I do if I need to operate the motorcycle before the KURYAKYN 6967 adhesive has fully bonded?

If the bike is going to be operated before full bonding occurs, secure the Accent to the fairing with a good quality masking or painter’s tape.


CLICK HERE TO DOWNLOAD KURYAKYN 6967 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.