KUKIRIN G1 PRO (01) PDF DOCUMENT

It is important to have a thorough understanding of your new electric scooter to achieve the best performance, comfort, fun, and safety. Always read the manual carefully first.

For your first ride, do so in a safe and controlled manner, away from cars, obstacles, and other riders. It is prohibited to ride on highways, motor vehicle lanes, and public lanes. Avoid reverse traffic and riding in the rain. If you encounter waterlogged roads, slow down and detour.

Scooters are vehicles with certain risks. Do not use mobile phones or wear headphones while cycling. It is necessary to understand and follow local traffic rules for riding electric scooters on public roads.

For your own safety, always wear a qualified helmet. It is also recommended to use protective equipment such as elbow and knee pads.

If you plan to use the electric scooter on public roads, it is necessary to equip it with basic mandatory equipment in accordance with relevant laws and regulations.

This product is designed for personal use only and should not be used for commercial or other purposes.

Before cycling, check that the tire pressure is correct and that the handlebars are installed correctly and securely. Ensure the battery is fully charged. If the battery is low during cycling, keep the vehicle moving slowly and steadily, and charge it as soon as possible.

Before each charge, inspect the charger, cables, and plugs. Do not use a damaged charger.

When braking on slippery roads, the braking distance is longer than on dry roads, so brake earlier to park more safely.

Avoid using the electric scooter on rainy, stormy, or snowy days. If electrical components like the control unit, engine, or battery become damp or submerged, irreversible damage can occur, potentially leading to a battery explosion.

This product is for one adult at a time. Do not carry passengers. Do not ride if you feel uncomfortable or are under the influence of alcohol or drugs.

The vehicle is not a toy. Do not provide your scooter to anyone who does not know how to use it correctly. If you allow others to ride it, you are responsible for ensuring they are aware of all warnings and precautions.

Keep the electric scooter away from flammable materials and open flames.

The main components of the KUKIRIN G1 PRO are:

Headstock group

Front pole assembly

Bottom silicone pad

Bottom plate cover

Controller

Foot pedal group

Rear fork assembly

Bottom plate plastic shell assembly

Charging port

Kickstand assembly

Bottom plate cover assembly

Battery

Front fork assembly

Bottom plate assembly

Product name	KuKirin G1 Pro
Size	Folded size	1270*598*575mm
	Unfolded size	1270*598*1330mm
Parameters	Maximum speed	< 25 km/h
	Medium-speed endurance	≤ 70 km
	Maximum slope	< 26°
	Tires	10 inch off-road tires
	Shock-absorbing	Front and rear spring damping
	Waterproof	IP54
	Brakes	Front and rear disc brakes
Battery data	Display device	Speed, mileage, battery level, front light, etc.
	Lighting	LED
	Input voltage	100~240V/50~60Hz
	Voltage/Capacity	48V/20.8Ah
	Charging time	54.6V/2A charger, charging for approximately 10 hours.
	Maximum load	120 kg
Weight	Net weight	About 35 kg

The packing list includes:

1. User’s manual*1

2. Tool*1

3. Charger*1

4. Bolt*8

Please carefully check for any loss or damage upon receiving the product.

Follow these steps for unpacking and assembly:

1. Pull out the bracket and fix the folding switch.

2. Insert the T-shaped front-end into the upright pole.

3. Tighten the screws and check the power switch.

To unfold the scooter:

1. Drop the hook and pull the standing bar.

2. Pull up the upright pole.

3. Lock the folding clip.

Lubricating oil: Every six months, add a small amount of white lubricating grease or lubricant to the folded area for maintenance. Inspect the scooter every three months to see if any screws are loose. If any are loose, please tighten them.

Battery: When the scooter is charging or not in use, please turn off the power. If it will not be in use for a long time, place the electric scooter in a safe location and charge it at least once every 3 months.

Storage: Do not leave the scooter in scorching sun or other severely humid areas for a long time. Keep the scooter clean.

Startup: Long press the power button to start up.

Switch Gears: Single click the power button to switch gears.

Switch Drive Modes: Double click the power button to switch models between single and dual drive.

Switch Mileage Display: Four clicks of the power button to switch between TRIP (single trip mileage) and ODO (total mileage).

Headlight: Press the headlight button alone to turn the headlights and tail lamp on together. When pinching the brake handle, the tail lamp will flash.

Turn Signals: When pressing the left/right turn button, the corresponding turn light will flash, the icon on the display will flash, and a sound will drip synchronously.

To enter the setting interface, pinch the brake handle and press the power button four times continuously. Press the headlight button to confirm a setting. The available settings are:

P0: Kilometer and miles option setting. The default is kilometer. (0: kilometer, 1: miles).

P3: Cruise control system setting. The default is non-cruise. (0: non-cruise, 1: cruise).

P4: Zero-start and non-zero start setting. The default is non-zero start. (0: Zero-start, 1: non-zero start).

PA: Ambient light setting. The default is on. (1: on, 0: off).

Malfunction	Code	Solutions
Motor Hall	E01	Retry after replacing the rear motor/controller.
Accelerator	E02	Retry after replacing the throttle.
Under-voltage	E04	Low battery level, recharge and retry.
Over-current protection	E08	1. Check the wiring port. 2. Replace the controller.
Controller	E10	Retry after replacing the controller.
Communication	E20	Retry after replacing the instrument/controller.
Brake	E40	1. Check the brake lever wiring port. 2. Replace the brake lever.

When charging the KUKIRIN G1 PRO, the charger indicator light will be red. When the scooter is fully charged, the indicator light will turn green.