KSIX SATURN SMART RING BSR01X (01) PDF Document

The technical specifications for the KSIX SATURN SMART RING BSR01X are as follows:

Ring battery: 15 mAh

Case battery: 200 mAh

Voltage frequency: 5 V / 160 mA

Frequency range: 2402-2480 GHz

Maximum transmitted power in frequency ranges: 2 dBm

Compatibility: Android 5.1 / iOS 8.0 and later versions

App: KSIX Ring

Ring material: Stainless Steel and resin

Charging case material: ABS

Protection rating: IP68 / 5ATM

Case weight: 21.4 g

Autonomy: Up to 3 days in normal use

Ring charging time: 1 hour

Charging case charging time: 2 hours

The weight of the KSIX SATURN SMART RING BSR01X varies by size:

When you purchase the KSIX SATURN SMART RING BSR01X, the following items are included in the box:

1 x Smart Ring

1 x Charging case

1 x USB-C cable (40 cm)

1 x User manual

The KSIX SATURN SMART RING BSR01X and its charging case feature the following components:

1. Sensor

2. Charging port (on the ring)

3. Blood oxygen red LED

4. Heart rate green LED

5. USB-C charging port (on the case)

The LED on the charging case provides status information during the charging process:

When charging the ring case, the LED will light steady red.

Once the case is fully charged, the green LED will flash.

You should wear the KSIX SATURN SMART RING BSR01X on the finger that fits best. However, it is recommended to wear it on the index or middle finger to ensure better data monitoring and accuracy.

To choose the right size for your KSIX SATURN SMART RING BSR01X, take a measuring tape or string and tie it around the finger of your choice. Measure the length and select your size. If your measurement falls between two sizes, it is recommended to choose the larger size.

Refer to the following tables for inner diameter and finger perimeter measurements:

Inner Diameter Measurements:

Finger Perimeter Measurements (Distance between overlapping points):

To turn on the KSIX SATURN SMART RING BSR01X, simply take it out of its charging case and put it on your finger; it will turn on automatically.

To turn the device off, place it back into its charging case. You can also turn it off through the compatible app.

Follow these steps to register and pair your KSIX SATURN SMART RING BSR01X:

1. Enable Bluetooth on your smartphone and open the KSIX Ring app.

2. Tap on “Bind immediately” within the app.

3. Select “KSIX Ring” from the list to pair the device and accept all requested permissions.

4. Go to your profile settings in the app, fill in all the required fields, and set your personal goals.

The KSIX SATURN SMART RING BSR01X allows you to take pictures from your smartphone remotely. To use this feature, access the main menu of the smart ring app and tap on the camera icon. Once the camera is activated, simply tap on the ring to take a photo.

The KSIX SATURN SMART RING BSR01X features an anti-lost function. To locate the device, access the app’s main menu and tap on “Find the ring.” A green LED light will then turn on inside the ring to help you find it.

The KSIX SATURN SMART RING BSR01X monitors several health and activity metrics:

Sports Monitoring: Access the “Sports Record” section in the app, tap the “Go!” button, and select the specific sport you want to monitor.

Activity Tracker: The ring automatically registers steps taken, calories burned, and distance travelled. Basic info is shown on a card in the main menu, which can be tapped for more detailed statistics.

Heart Rate Meter: The device monitors your heart rate automatically. You can view a quick overview in the main menu or tap the card for detailed information and immediate measurements.

Sleep Monitoring: The ring provides statistics on the time and quality of your sleep while you are resting. You can find records of sleep routines and weekly/monthly reports in the main menu.

Blood Oxygen Saturation Meter: You can measure your blood oxygen levels instantly by tapping the corresponding card in the app’s main menu.

To maintain your KSIX SATURN SMART RING BSR01X, follow these guidelines:

Clean the product regularly with a dry cloth. Ensure the device is unplugged or switched off during cleaning.

Keep ports and connectors clean from dust and dirt to ensure proper connections.

Avoid applying excessive pressure to any part of the product and avoid breaking or dropping it.

If the product is exposed to or immersed in liquids, rinse it with fresh water and dry it immediately afterward.

Store the device in a dry, clean place away from moisture, dirt, and flammable materials. Do not expose it to fire or extreme temperatures.

Do not attempt to open, disassemble, or repair the product yourself, as these actions will invalidate the warranty.

Maintain the battery state of charge between 20% and 80% to preserve its overall battery life.

No. Heart rate and blood pressure data from the KSIX SATURN SMART RING BSR01X should not be used as a basis for making any medical diagnostic decisions. This data may not be perfectly accurate due to factors like signal interference, improper placement, or physiological changes. Only qualified medical personnel should diagnose and treat medical conditions. You should not use the device data to modify any medication or medical treatment.