KRINNER TREE GENIE M (01) PDF MANUAL

KRINNER TREE GENIE M (01) PDF SUMMARY:

How do I open the Christmas tree stand?

First, slide the red foot pedal lock (A) into the green unlocked position. Lift the foot pedal (B) upwards several times to open the clamping mechanism.

What should I do to the foot pedal to open the Christmas tree stand?

Lift the foot pedal (B) upwards several times to open the clamping mechanism.

What happens to the clamps when I lift the foot pedal?

The clamps will open step by step.

What kind of footwear should I wear when lifting the foot pedal?

The foot pedal must be lifted with suitable footwear.

What should I avoid doing in the area of the clamps when opening the Christmas tree stand?

To avoid injury, do not place any body parts (fingers) in the area of the clamps.

Where should I place the Christmas tree stand?

Always place the Christmas tree stand on a flat, even surface.

What can I use to prevent possible damage to my floor?

The use of a heavy plastic sheet underneath the Christmas tree stand is recommended.

How should I prepare the trunk of the Christmas tree before placing it in the stand?

The trunk must have an even cut and may not be drilled in the middle.

What should I do if the trunk cut is inclined or the trunk is drilled?

Re-cutting the trunk is necessary.

Why is it important to have an even trunk cut?

An uneven or inclined cut causes reduced stability and enhances the risk of the tree to fall.

Where should I place the trunk of the tree in the stand?

Set the trunk of the tree into the middle of the Christmas tree stand onto the spike.

Can I use a trunk that has a drilled hole in the middle?

Do not use a trunk that has a drilled hole in the middle.

What should I do to the foot pedal once the trunk is in place?

Pump the foot pedal several times (B) with your foot (wear suitable footwear) until you feel firm contact of the claws to the trunk.

What does the preliminary setting allow?

This preliminary setting allows the tree to stand by itself without any danger of tilting while permitting fine adjustments to be made.

What should I do once the tree is in the stand?

Step back and check if your tree is standing straight and adjust if necessary.

What should I add to the stand after anchoring the tree?

Add water to keep your tree fresh.

What type of water should I use to fill the stand?

Always keep the inner container filled with tap water.

How do I know when to stop adding water?

Slowly fill with tap water until the level indicator (D) is well visible. Stop adding water.

What could happen if I overfill the stand with water?

Overfilling can damage the seal and create recurrent leaking, and may cause damage to your floor covering.

How do I drain the Christmas tree stand after removing the tree?

Tip the stand towards the opening at the level indicator into a sink.

What will happen to any residual water left in the stand?

Residual water remaining in the stand will eventually dry out by itself.

How do I clean the stand?

After use, wash the inside and outside of the stand with a soft cloth or sponge and a mild detergent. Rinse thoroughly.

What types of cleaners should I avoid using on the stand?

Do not use any chemicals or abrasive cleaners.

What should I do with the stand before storing it?

Dry completely prior to storage.

How do I secure the Christmas tree stand for storage?

Push down the foot pedal and put the red lock back into a secured position.

How do I take out the Christmas tree?

Slide the lock (A) into the green unlocked position. Before lifting the foot pedal (B) several times ensure that you are holding the tree in an upright position. When lifting the foot pedal (B) the clamps will open step by step into the vertical position. Now you can take out the Christmas tree.

What precautions should I take when removing the tree from the stand?

The foot pedal must be lifted with suitable footwear. To avoid injury, do not place any body parts (fingers) in the area of the clamps. Watch your children!

How do I securely fasten the Christmas tree stand?

Pump the foot pedal until you hear the ‘DING’ of the bell inside the foot pedal. The claws now have optimal contact to the trunk and the tree stand is now secured.

How do I close the claws on the Christmas tree stand?

Pump the pedal with your hand and as the claws begin to come into the closed position, push down on 2 claws so that the other 2 claws can fold in on top of the 2 other. Press the button (this is the bell mechanism) on the underside of the foot pedal when claws have come to a closed position (you will be able to reach this button when the pedal is at middle or upper position rather than

What is the warranty period for the TREE GENIE M?

3 Years

What is the warranty period for the TREE GENIE XXL Deluxe?

5 Years

What are the conditions of the warranty?

Krinner warrants this Product to be free from defects in material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of three (3) (M Deluxe) & five (5) (XXL Deluxe) years.

What will Krinner do if the product fails during the warranty period?

If, during the warranty period, this product fails to operate under normal use and service, due to improper materials or workmanship, Krinner authorized distributors or authorized service partners will, at its option, replace the product in accordance with the terms and conditions stipulated herein.

What is the owner responsible for in order to obtain service under the limited warranty?

Shipping and handling fees for replacement stands.

What must be presented with the product to be replaced in order to validate the warranty?

The original receipt by the dealer, specifying the date of purchase.

What right does Krinner reserve regarding warranty services?

The right to refuse warranty services if the original receipt information has been removed or changed after the original purchase of the product from the dealer.

What is the warranty period for a replaced product?

The remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer.

What does the warranty not cover?

Any failure of the product due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with Krinner’s USER INSTRUCTIONS, accident, acts of God and use of unauthorized parts or attachments.

What else does the warranty not cover?

Product failures due to repair installations, modifications, or improper service performed by a non-Krinner authorized service workshop or opening of the product by non-Krinner authorized persons.

When is the warranty void?

If the Christmas Tree Genie™ by Krinner is structurally altered.

Are there any other express warranties besides the printed limited warranty?

There are no other express warranties, whether written or oral, other than this printed limited warranty.

What is the limitation on implied warranties of merchantability or fitness for the prescribed purpose?

Limited to the duration of this limited warranty.

Can Krinner be held liable for incidental or consequential damages?

In no event shall Krinner be liable for incidental or consequential damages of any nature whatsoever, including but not limited to lost profits or commercial loss.

What is the extent to which damages are disclaimed by law?

To the full extent those damages are disclaimed by law.

Do all states allow the exclusion or limitation of incidental or consequential damage, or limitation of duration of implied warranties?

Some states do not allow the exclusion or limitation of incidental or consequential damage, or limitation of duration of implied warranties, so the preceding limitations or exclusions may not apply to you.

What legal rights does this warranty provide?

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

What is the maximum tree height for the TREE GENIE M?

7 Ft. / 2.20 m

What is the maximum tree height for the TREE GENIE XXL Deluxe?

12 Ft. / 3.60 m

What is the maximum trunk diameter for the TREE GENIE M?

4.7” / 12.0 cm

What is the maximum trunk diameter for the TREE GENIE XXL Deluxe?

7” / 17.0 cm

What is the weight of the TREE GENIE M?

13 lbs / 6.0 kg

What is the weight of the TREE GENIE XXL Deluxe?

18 lbs / 8.0 kg

What is the diameter of the TREE GENIE M?

15.4” / 39.0 cm

What is the diameter of the TREE GENIE XXL Deluxe?

20” / 52.0 cm

What is the height of the TREE GENIE M and TREE GENIE XXL Deluxe?

4.8” / 12.0 cm

What is the water capacity of the TREE GENIE M?

1.2 gal. / 4.5 l

What is the water capacity of the TREE GENIE XXL Deluxe?

2.5 gal. / 11 l

What should the Krinner Christmas tree stand only be used for?

Naturally grown trees.

What should I check yearly before tree setup?

Check the water reservoir for cracks and holes.

Why should I check the water reservoir yearly?

To prevent floor damage due to possible leakage.

Can the Christmas tree stand be used for any other purpose?

Do not use the tree stand for any other purpose like sign plates, clothes dryers, flag poles or sunshades, etc.

Will Krinner cover damage done by the misuse of the Christmas tree stand?

Krinner will not cover any damage done by misuse of this Christmas tree stand.

Where can this Christmas tree stand be used?

This Christmas tree stand is for indoor use only.

What should I ensure before putting up the Christmas tree?

That your tree stand has a secure base.

Is a thick carpet a secure base for the Christmas tree stand?

A thick carpet is not a secure base!

What kind of surface should I use for the tree stand?

Only use the tree stand on a solid, level, and even surface.

What is the risk of using an uneven or inclined surface?

Uneven or inclined surfaces cause reduced stability and enhance the risk of the tree to fall.

What should I ensure while pushing down the foot lever?

That there are no hands or other body parts in between the clamps and the trunk.

What could happen if hands or other body parts are in between the clamps and the trunk?

It can cause serious injuries by squeezing.

Who should be kept away from the Christmas tree stand?

Watch your children! The Christmas tree stand is not a toy! Do not allow children to operate or use it.

Is it allowed to alter the construction of the Krinner Christmas tree stand?

This Krinner Christmas tree stand is a safety product. Do not alter the construction of the Krinner Christmas tree stand.

What will void the warranty?

Altering the construction of the Christmas tree stand. Also, do not use the Krinner Christmas tree stand if it shows any damage.

What should I do if electric lighting is used on the tree?

If electric lighting is used, do not allow this electric lighting to burn unattended.

What precaution should I take with electrical wires near the stand?

Caution! Water is a conductor. Ensure that electric wires are in a safe distance to the water tank of the Christmas tree stand.

What are the benefits of having a fresh and green Christmas tree?

A fresh and green Christmas tree not only looks better but also reduces the fire hazard.

How should the trunk be cut to absorb water?

The trunk must have a fresh, clean, and even cut to absorb water.

How much water should I keep in the tree stand?

Therefore always keep sufficient water in the tree stand.

What kind of water should be used in the tree stand?

Only fill in tap water.

What could happen if I add too much water to the Christmas tree stand?

Adding too much water will lead to overflowing and may cause damage to the surface underneath.

Where should I find the instructions for the correct filling of the stand?

Strictly follow the instructions under the chapter ‘filling the Christmas tree stand with water.’

Where should I keep the tree away from?

Keep your tree away from fireplaces and open flames.

What should I ensure before applying decorations and lighting?

That the tree is securely fastened, well balanced, and positioned in the middle of the tree stand.