Free English KIDNORT DE-040347 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KIDNORT DE-040347 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the important safety instructions for the KIDNORT DE-040347?
The surfaces of the KIDNORT DE-040347 appliance can become very hot, so please be careful when using it.
Residual heat remains on the surface of the heating element of the KIDNORT DE-040347 appliance even after use.
The KIDNORT DE-040347 appliance must not be operated by persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge, unless they have received instructions or are under supervision.
Keep the KIDNORT DE-040347 appliance and its cord out of the reach of children under the age of 8.
Children must not play with the KIDNORT DE-040347 appliance.
Cleaning must not be carried out by children under the age of 8 and without supervision.
The KIDNORT DE-040347 appliance is not intended to be operated by means of an external timer or separate remote control system.
What is the intended use for the KIDNORT DE-040347?
The KIDNORT DE-040347 appliance is intended to heat milk for infants and young children.
The product is intended for indoor use in households. It may also be used in canteens for staff in shops, offices or other places of employment, on farms and by customers in hotels, motels, etc.
It may not be used for commercial purposes. Any other use is considered inappropriate and dangerous. The manufacturer is not liable for injuries resulting from improper use of the KIDNORT DE-040347 appliance.
What should I do to prevent accidental burns to my baby when using the KIDNORT DE-040347?
To prevent accidental burns to your baby, always shake the bottle after heating and check the temperature of its contents before feeding your baby.
What should I do if the power cord of the KIDNORT DE-040347 becomes damaged?
If the power cord has become damaged, it must be replaced by the manufacturer’s staff, the service centre representative or suitably qualified persons.
Where should the KIDNORT DE-040347 appliance be placed?
The KIDNORT DE-040347 appliance should be placed on flat surfaces – stone worktops, tables, etc.
The appliance should be kept away from walls, vertical furniture surfaces and any material not resistant to heat – the housing elements get quite hot.
What is the procedure for unplugging the KIDNORT DE-040347 from the main power supply?
When unplugging the KIDNORT DE-040347 appliance from the main power supply, always grasp the plug, not the cord.
What are the four operating modes offered by the KIDNORT DE-040347 product?
Keep warm – heating and maintaining the temperature of the milk
Sterilise – bottle sterilisation
Reheat – warming up milk
Quick Warm – warming up milk taking the quantity (volume) into account
How do I operate the Keep warm mode on the KIDNORT DE-040347?
Fill the warmer with clean water to the level indicated (8) on the bottle holder (2).
Place a bottle with milk in the bottle holder and cover with the lid (1).
Switch the KIDNORT DE-040347 appliance on using the ON/OFF button (7) and touch the Keep warm button (3).
Set the target temperature using the “+” and “-” buttons.
The warmer will start working after approximately three seconds. The current temperature will be shown on the display of the appliance. The operating temperature can be changed while the heater is running.
The temperature range in this mode is 37°C-60°C.
The appliance will automatically switch off after 24 hours of operation in this mode.
How do I operate the Sterilise mode on the KIDNORT DE-040347?
The inside of the KIDNORT DE-040347 appliance must be cleaned before sterilisation.
Fill the heater with 50-70 ml of clean water.
Place the bottle you want to sterilise in the bottle holder (2) and cover it with the lid (1).
Switch the appliance on by touching the ON/OFF button (7), then touch the Sterilize button (4).
The sterilisation process should take from ten to twenty minutes.
Be careful when removing the lid and taking the bottles out once the sterilisation process is complete.
How do I operate the Reheat mode on the KIDNORT DE-040347?
Fill the warmer with clean water to the level indicated (8) on the bottle holder (2).
Place a bottle with milk in the bottle holder and cover with the lid (1).
Switch the appliance on by touching the ON/OFF button (7) and touch the Reheat button (5).
Set the target temperature using the “+” and “-” buttons.
The warmer will start working after approximately three seconds. The current temperature will be shown on the display of the appliance. The operating temperature can be changed while the heater is running.
The temperature range in this mode is 60°C-90°C.
The appliance will automatically switch off after 6 hours of operation in this mode.
How do I operate the Quick Warm mode on the KIDNORT DE-040347?
Fill the warmer with clean water to the level indicated (8) on the bottle holder (2).
Place a bottle with milk in the bottle holder and cover with the lid (1).
Switch the appliance on by touching the ON/OFF button (7).
Select one of the three milk volume options by touching the Quick warm button (5):
60-120 ml
120-180 ml
180-250 ml
The warmer will start working after approximately three seconds. In this mode, manual temperature control is deactivated, the appliance sets the temperature automatically.
The display will indicate the heating time in minutes.
What is the estimated time required to finish heating milk using the Quick Warm mode on the KIDNORT DE-040347 based on milk volume and bottle type?
The following table provides an estimate of how long it takes to finish heating the milk (for milk with an initial temperature of 3-7°C. The data is for information purposes only):
| Milk volume | 60-120 ml | 120-180 ml | 180-250 ml |
| Glass bottle | 4-6.5 min | 6.5-7.5 min | 7.5-9.5 min |
| Plastic bottle | 6-8 min | 8-9.5 min | 9.5-10.5 min |
| Silicone bottle | 8.5-11.5 min | 11.5-15 min | 15-17.5 min |
What are the design elements of the KIDNORT DE-040347?
1. Lid
2. Bottle holder
3. Keep Warm button
4. Sterilize button
5. Reheat button
6. Quick Warm button
7. ON/OFF button
8. Maximum water level
What are the technical specifications for the KIDNORT DE-040347?
Model: DE-040347
Power supply: 220-240V~, 50/60Hz
Power: 250W
Temperature range: 37°C-90°C
How should I clean the housing of the KIDNORT DE-040347?
The appliance housing can be cleaned with a dry cloth or paper towel.
In the case of heavy soiling, it is permissible to use a cloth slightly dampened with lukewarm water. Then, immediately wipe the cleaned area with a dry cloth or paper towel and allow the appliance to dry fully.
CLICK HERE TO DOWNLOAD KIDNORT DE-040347 (01) PDF DOCUMENT