KENWOOD DMX4707S (01) PDF MANUAL

If the unit or the connected unit fails to operate properly, reset the unit. Press the button. The unit returns to factory settings.

NOTE

Disconnect the USB device before pressing the button. Pressing the button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see Disconnect the USB device (P.15).

When the unit is turned on after resetting, the Initial SETUP screen appears. See Initial setup (P.6).

Press the HOME button to turn on the unit.

To turn off the unit:

Press the HOME button for 1 second.

NOTE

If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.6).

Perform this setup when you use this unit first time.

1. Set each item as follows:
   1. Language

      Select the language used for the control screen and setting items. Default is “American English(en)”.

      1. Touch Language.
      2. Touch Language Select.
      3. Select the desired language.
      4. Touch G.
   2. Clock

      Adjusts clock.

      For detailed operation, see Calendar/clock settings (P.6).

   3. Display

      Set the image on the screen.

      1. Touch Display.
      2. Touch Background.
      3. Select the image.
      4. Touch.

      For detailed operation, see Display Setup (P.39).

   4. Camera

      Set the parameters for the camera.

      1. Touch Camera.
      2. Set each item and touch.

      For detailed operation, see Camera Setup (P.35).

   5. DEMO

      Set the demonstration mode. Default is “ON”.

      1. Touch DEMO and set ON or OFF.
2. Touch Finish.

NOTE

These settings can be set from the SETUP menu. See Setting Up (P.37).

1. Press the MENU button.

   MENU screen appears.

2. Touch .
3. Touch User Interface.

   User Interface screen appears.

4. Touch Clock Adjust.
5. Adjust the date, then adjust the time.
6. Touch Set.

NOTE

Deactivate RDS CT before adjusting the clock.

See Radio Setup (P.20).

To adjust the volume (0 to 40), Press to increase, and press to decrease. Holding increases the volume continuously to level 15.

To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc.

• Touch

  Touch the screen gently to select an item on the screen.

• Touch and hold

  Touch the screen and keep your finger in place until the display changes or a message is displayed.

• Flick

  Slide your finger quickly to the left or right on the screen to change the page. You can scroll the list screen by flicking the screen up/down.

• Swipe

  Slide your finger up or down on the screen to scroll the screen.

1. Press the HOME button.

   HOME screen appears.

1. Touch on the HOME screen.

   From the screen, you can select the following sources and functions.

   • : Switches to the USB Mirroring screen from the connected Android smartphone. (P.14)

     It is necessary to connect Android smartphone with “Mirroring OA for KENWOOD” application installed and to set Mode to Mirroring for Android™™. (P.14)

   • : Switches to the Apple CarPlay screen from the connected iPhone. (P.12)
   • : Switches to the Android Auto screen from the connected Android smartphone. (P.13)

     It is necessary to connect Android smartphone compatible with Android Auto and to set Mode to Android Auto. (P.14)

   • : Displays the Hands Free screen. (P.31)

     When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, displays ” Disconnected” message in the TEL screen. When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto.

   • : Switches to the Radio broadcast. (P.18)
   • : Switches to the SiriusXM® satellite radio broadcast. (P.21)

     (Except DMX5020S)

   • : Plays a Bluetooth audio player. (P.27)
   • : Plays files on a USB device. (P.15)
   • : Switches to an external component connected to the AV-IN input terminal. (P.36)
   • : Puts the unit in standby. (P.9)

1. Touch on the HOME screen.
2. Touch STANDBY.

You can arrange the position of the source icons as you like.

1. Touch on the HOME screen.
2. Touch and hold the icon which you want to move to go into the customizing mode.
3. Drag it where you want to move.

1. Press the MENU button.

   MENU screen appears.

2. Touch to display the MENU screen.

The contents of the menu are as follows.

• : Displays the SETUP Menu screen. (P.37)
• : Displays the APP (Apple CarPlay/Android Auto) screen. (P.12)
• : Displays the Screen Adjustment screen. (P.37)
• : Displays the view camera. (P.35)
• : Displays the source selection screen. (P.9)
• : Turns the display off. (P.11)
• : Displays the Audio Control Menu screen. (P.41)
• : Close the MENU screen.

1. Select on the MENU screen.

To turn on the screen

1. Touch the display.

There are some common function keys in the list screens of most sources.

Function Keys:

• : Displays list type selection window.
• ♫: Displays music/movie file list.
• Text scroll: Scrolls the displayed text.
• Play etc.: Keys with various functions are displayed here.

  Play: Plays all tracks in the folder containing the current track.

  Up Top: Moves to the upper hierarchy.

• A // Page scroll: You can change the page to display more items by pressing . ☑: Displays the top or bottom page.
• Return: Returns to previous screen.

NOTE

Buttons which cannot be activated from the list screen are not displayed.

Apple CarPlay is a smarter, safer way to use your iPhone in the car.

Preparation

1. Connect iPhone using KCA-iP103 via USB terminal. (P.51)

   When iPhone compatible with Apple CarPlay is connected to the USB terminal, the Bluetooth smartphone currently connected is disconnected.

2. Unlock your iPhone.

Operation buttons and available Apps on the home screen of Apple CarPlay

You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter Apple CarPlay mode, touch Apple CarPlay icon in the source selection screen. (P.9)

To exit the Apple CarPlay screen

1. Press the HOME button.

Use Siri

You can activate Siri.

1. Press the VOICE button.
2. Talk to Siri.

Switch to the Apple CarPlay screen while listening to another source

1. Press the HOME button.

   HOME screen appears.

2. Touch Apple CarPlay.

NOTE

If sound is output using Apple CarPlay when the Apple CarPlay screen is displayed, the source is switched to Apple CarPlay.

Android Auto enables you to use functions of your Android smartphone convenient for driving.

Preparation

1. Connect an Android smartphone via USB terminal. (P.51)

   To use the hands-free function, connect the Android smartphone via Bluetooth. When an Android smartphone compatible with Android Auto is connected to the USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth smartphone currently connected is disconnected.

2. Unlock your Android smartphone.

NOTE

To use the Android Auto, It is necessary to set Mode to Android Auto. (P.14)

Operation buttons and available Apps on the Android Auto screen

You can perform the operations of the Apps of the connected Android smartphone. The items displayed on the screen differ among the connected Android smartphone.

To enter Android Auto mode, touch Android Auto icon in the source selection screen. (P.9)

To exit the Android Auto screen

1. Press the HOME button.

Using voice control

1. Press the VOICE button.

To cancel

1. Press the VOICE button.

Switch to the Android Auto screen while listening to another source

1. Press the HOME button.

   HOME screen appears.

2. Touch Android Auto.

NOTE

If sound is output using Android Auto when the Android Auto screen is displayed, the source is switched to Android Auto.

You can display and control the App on the unit while your smartphone is connected to the USB terminal.

Preparation

1. Download Mirroring App from the Google Play.

   Install the latest version of the Mirroring application “Mirroring OA for KENWOOD” on your Android.

2. Pair your smartphone with the unit via Bluetooth.

   See Register from the Bluetooth device (P.28) and Connect the Bluetooth device (P.29).

Select a Device Mode

1. Press the MENU button.

   MENU screen appears.

2. Touch .

   SETUP screen appears.

3. Touch Device.
4. Touch Mode.
5. Touch Mirroring for Android™™.

Mirroring OA Operation

1. Operate your smartphone to activate Mirroring App, then connect to this unit.
2. Press the HOME button.
3. Touch USB Mirroring.

You can display the same screen of the Android smartphone on the monitor of the unit.

1. Connect the USB device with the USB cable. (P.50)

1. Press the HOME button.
2. Touch .
3. Touch a source other than USB.
4. Detach the USB device.

The file system should be one of the following:

• FAT16
• FAT32
• exFAT

Most functions can be controlled from the source control screen and playback screen.

Control screen

• : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; File repeat(), Folder repeat (), Repeat all (PALL), Repeat off ( ).
• : Randomly plays all tracks in current folder. Each time you touch the key, random mode switches in the following sequence; File random(), Random off ( ).

Track information

Displays the information of the current file. Only a file name and a folder name are displayed if there is no tag information.

Operation keys

• Q: Searches track/file. For details on search operation, see Search Operation (P.17).
• ◄◄ ►►I : Searches the previous/next track/file. Touch and hold to fast forward or fast backward.
• II: Plays or pauses.
• ☑: Touch to mute or not to mute.

Function panel

Touch on the left side of the screen to display the function panel. Touch again to close the panel.

• : Searches previous/next folder.
• ASPECT (Only during video playback): Select screen mode.

  Full: Changes the aspect ratio of video and displays fully on the screen.

  Normal: Display with 4:3 ratio.

  Auto: Displays video fully on vertical or horizontal with no ratio change.

Content list

Touch on the right side of the screen to display the Content list. Touch again to close the list. Displays the playing list. When you touch a track/file name on the list, playback will start.

Indicator Items

• VIDEO: Identifies the video file.
• MUSIC: Identifies the music file.

Artwork/ Play mode indicator/ Playing time

The jacket of the currently playing file is displayed. etc.: Current play mode indicator The meanings of each icon are as follows; (play), (fast forward), (fast backward), ■■ (pause).

You can search music or video files by the following operations.

1. Touch Q.
2. Touch Category List ▼.
3. Select the list type.
   • Category List
   • Q Link Search
   • Folder List

Category search

You can search a file by selecting category.

1. Touch Category List.
2. Select whether you search by audio files .
3. Touch the desired category.
   • Artists
   • Albums
   • ♫Songs
   • Genres

   The list corresponding to your selection appears.

4. Touch to select desired item in the list.

   Repeat this step until you find the desired file.

Link search

You can search a file of same artist/album/genre as the current track.

1. Touch Link Search.
2. Touch the desired tag type. You can select from artist, album and genre.
   • Artists
   • Albums
   • Genres

   The list corresponding to your selection appears.

3. Touch desired item from the content list.

Folder search

You can search a file according to hierarchy.

1. Touch Folder List.
2. Touch the desired folder.

   When you touch a folder its contents are displayed.

3. Touch to select desired item in the list.

   Repeat this step until you find the desired file.

Most functions can be controlled from the source control screen.

To enter Radio source, touch Radio icon in the source selection screen. (P.9)

Control screen

• Information display

  Displays the information of the current station: Frequency Touching allows you to switch between Content A and Content B. Content A: PS name, Radio Text, PTY Genre Content B: Radio Text plus, Title Artist

  Preset#: Preset number

• Seek mode

  Switches the seek mode in the following sequence; AUTO1, AUTO2, MANUAL.

  • AUTO1 : Tunes in a station with good reception automatically.
  • AUTO2: Tunes in stations in memory one after another.
  • MANUAL: Switches to the next frequency manually.
• Operation keys

  : Tunes in a station. The method of frequency switching can be changed (see 2 in table).

  ☑: Touch to mute or not to mute.

• Preset list
  • Touch on the right side of the screen to display the Preset list. Touch again to close the list.
  • Recalls the memorized station.
  • When touched for 2 seconds, stores the current receiving station in memory.
• Function panel

  Touch on the left side of the screen to display the function panel. Touch again to close the panel.

  • TI (FM only): Sets the traffic information mode on. For details, see Traffic Information (P.20).
  • SETUP (FM only): Displays the Radio SETUP screen. For details, see Radio Setup (P.20).
  • AME: Presets stations automatically. For details, see Auto memory (P.19).
  • PTY (FM only): Searches a program by setting program type. For details, see Search by program type (P.19).
  • ΜΟΝΟ (FM only): Select the Monaural reception.
• FM AM

  Switches the band.

• Indicator Items
  • ST: A stereo broadcast is being received.
  • MONO: The forced monaural function is on.
  • TI: Indicates the reception state of traffic information.

    White: TP is being received.

    Orange: TP is not being received.

You can store stations with good reception in memory automatically.

1. Touch desired band key.
2. Touch on the left side of the screen.

   Touch AME.

3. Touch Yes.

   Auto memory starts.

You can store the current receiving station in memory.

1. Select a station you wish to store in memory.
2. Touch FM# (#: 1-24) or AM# (#: 1-12) in which you want to store the station for 2 seconds.

You can list and select memorized station.

1. Touch on the right side of the screen.

   Select a station from the list.

You can tune to a station with a specific program type when listening to FM.

1. Touch on the left side of the screen.

   Touch PTY.

   PTY Search screen appears.

2. Select a program type from the list.
3. Touch Search.

You can search a station of the selected program type.

You can listen and watch the traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Broadcast Data System that includes the Tl information.

1. Touch on the left side of the screen.

   Touch TI.

   Traffic information mode is set.

   When the traffic bulletin starts

   The Traffic Information screen appears automatically.

You can set tuner related parameters.

1. Touch on the left side of the screen.

   Touch SETUP.

   Radio SETUP screen appears.

2. Set each item as follows.

   RDS CT

   Synchronizing the Radio Data System station time data and this unit’s clock. “ON” (Default), “OFF”

Only SiriusXM® brings you more of what you love to listen to, all in one place.

To listen to the SiriusXM source, touch the SiriusXM icon on the source selection screen. (P.9)

Control screen

• Information display
  • Displays the information on the current channel: Channel Name P#: Preset number #CH: Channel number Touching allows you to switch between Content A and Content B. Content A: Artist Name, Song Title Content B: Content Info, Category Name

  NOTE

  • While getting contents, “Waiting” is showing on the display.
• Band button

  Switches among bands. (SXM1/SXM2/SXM3)

• Artwork / Function panel
  • Displays the album artwork for most SiriusXM music channels.
  • Touch of the screen to display the function panel. Touch to close the panel.
  • Direct Channel: Touch and enter the desired number. For details, see Direct search (P.23).
  • SETUP: Touch to display the SiriusXM SETUP screen. For details, see SiriusXM Setup (P.24).
  • Replay/Live: Touch to turn on or off the replay mode. see Replay (P.24).
• Operation keys
  • Q: Display the Category search screen. For details on search operation, see Category/Channel search (P.23).
  • ►II: Plays or pauses. See Replay (P.24).
  • CH▼ CHA: Selects a channel.
  • ☑ : Touch to mute or not to mute.
• Preset list
  • Touch of the screen to display the preset list. Touch to close the list.
  • Recalls the memorized channel.
  • When touched for 2 seconds, stores the currently being received channel in the memory.

You can store the current channel in memory.

1. Tune in the channel you wish to store in the memory.
2. Touch on the right side of the screen.
3. Touch SXM(1-3) P(1-6) in which you want to store the channel for 2 seconds.

You can list and select memorized channels.

To select from the preset list

1. Touch on the right side of the screen.

   Select a channel from the list.

You can tune in a channel directly.

1. Touch on the left side of the screen.

   Touch Direct Channel.

2. Enter the channel number and touch Enter.

NOTE

To clear the number you entered, touch BS.

You can specify the desired category and select a channel.

1. Touch Q.
2. Select a category.

Channel list appears.

3. Select the desired content from the list.

*1 Select a desired item (Info, CH Name, Artist, Title).

NOTE

• All channels in the selected category appear.
• Touching All-Channels displays all channels.

You can replay the last 60 minutes of the program from the current channel.

1. Touch ►II or Replay on the function panel.

• Press to skip to the previous/next track. Press and hold to rewind or fast forward.
• ►II Plays or pauses.
• Replay time bar/Play mode indicator Displays the recorded data capacity and playback position. -, etc.: Current play mode indicator

To return to live music/content

1. Touch the left side of the screen.
2. Touch Live.

1. Touch on the left side of the screen.

   Touch SETUP.

   SiriusXM SETUP screen appears.

   See the following sections for each setting.

   • Set up the Parental Code (P.25)
   • Set up the Parental Control (P.25)
   • Set up the Parental Lock Channel (P.26)
   • Reset to the default settings (P.26)

You can set a SiriusXM parental code for Parental Control.

1. Touch Parental Code on the SiriusXM SETUP screen.

   Parental Code Set screen appears.

   NOTE

   • The code number is set to “1111” as default.
2. Enter the current code number and touch Enter.

   Parental Code 1st screen appears.

3. Enter the new code number and touch Enter.

   Parental Code 2nd screen appears.

4. Enter the same code number as that you entered in step 3 and touch Enter.

   ► The code number is confirmed and the SiriusXM parental code is now set.

The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content.

1. Touch Parental Control on the SiriusXM SETUP screen.
2. Touch User, Mature or OFF.
   • User

     Locks only the selected channels.

   • Mature

     Locks channels classified as “mature” only.

   • OFF

     Deactivates the parental mature and user locks.

3. Enter the parental code you originally input in as stated in Parental code (P.25) and touch Enter.

This allows you to limit access to any SiriusXM channel (Parental Lock Channel).

1. Touch Parental Lock Channel Selection on the SiriusXM SETUP screen.

   Parental Lock Code screen appears.

   NOTE

   • You need to set up a parental code beforehand as stated in Parental code (P.25).
2. Enter the parental code you originally input as stated in Parental code (P.25) and touch Enter.

   Parental Lock Category Select screen appears.

3. Touch the desired category in the list.

   Displays all channels in the selected category.

4. Touch each channel on the list and set to ON or OFF.

   ON: Locks the channel.

   OFF: Unlocks the channel.

*1 Select a desired item (Info, CH Name, Artist, Title).

Reset

1. Touch SiriusXM Reset on the SiriusXM SETUP screen.

   Confirmation screen appears.

2. Touch Yes.

   All SiriusXM settings are reset to defaults.

NOTE

• Touch All-Channels to display all channels.
• To delete the parental lock channel setting, touch Disable All and then touch Yes on the confirmation screen.

It is necessary to register the Bluetooth audio player or cell-phone to this unit before using the Bluetooth function.

You can register up to 7 Bluetooth devices.

NOTE

Up to 7 Bluetooth devices can be registered. If an attempt is made to register the 8th Bluetooth device, the Bluetooth device connected on the earliest date will be deleted to register the 8th one.

1. Turn on the Bluetooth function on your smartphone/cell-phone.
2. Search the unit (“DMX*****”) from your smartphone/cell-phone.
3. Operate your smartphone/cell-phone according to the displayed messages.

   Confirm the request on the smartphone/cell-phone.

   If a PIN code is required, enter the PIN code (“0000”).

   When data transmission and connection have completed, the Bluetooth connection icon appears on the screen.

1. Press the MENU button.

   MENU screen appears.

2. Touch .
3. Touch Bluetooth.

   Bluetooth SETUP screen appears. See the following section for each setting.

   • Connect the Bluetooth device (P.29)

1. Touch Select Device in the Bluetooth SETUP screen.
2. Touch you want to connect.

To delete the registered Bluetooth device

1. Touch Delete.
2. Touch Yes.

   Confirmation message appears.

NOTE

If the icon is lighted, it means that the unit will use that device.

Most function can be controlled from the source control screen.

To enter Bluetooth source, touch Bluetooth icon in the source selection screen. (P.9)

Bluetooth basic operation

Control screen

• : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; File repeat (20), Folder repeat (2), All songs repeat (PAL), Repeat off ( ).
• : Randomly plays all tracks in current folder. Each time you touch the key, random mode switches in the following sequence; All random(), Random off ( ).
• Operations and display indications may differ according to their availability on the connected device.

Information display *

Displays the name of the track information.

Operation keys *

• Q: Searches file. See File search (P.30).
• ►►►►►►: Searches the previous/next content. Touch and hold to fast forward or fast backward.
• : Plays.
• II: Pauses.
• X: Touch to mute or not to mute.

Touch on the left side of the screen to display the function panel. Touch again to close the panel.

• BT DEVICE CHANGE: Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP). See Connect the Bluetooth audio (P.30).

Play mode indicator/ Playing time

• II: Current play mode indicator

The meanings of each icon are as follows; (play), (fast forward), (fast backward), ■ (pause).

* These items appear only when the audio player which supports AVRCP profile is connected.

1. Touch on the left side of the screen.

   Touch BT DEVICE CHANGE.

2. Touch the device name you want to connect.

File search

1. Touch Q.
2. Touch the desired file or folder.
3. Touch desired item from the content list.

   Playback starts.

NOTE

For operations in the list screen, see List screen (P.11).

You can use telephone function by connecting the Bluetooth telephone to this unit.

NOTE

While Apple CarPlay or Android Auto is being connected, Bluetooth Hands-Free function cannot be used. Only Apple CarPlay or Android Auto Hands-Free function can be used.

Bluetooth SETUP

1. Touch .

   Bluetooth SETUP screen appears.

NOTE

• The status icons such as battery and antenna displayed may differ from those displayed on the cell-phone.
• Setting the cell-phone in the private mode can disable the hands-free function.

Make a call

1. Touch TEL / .

   Hands Free screen appears.

   NOTE

   • If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel screen when the mobile phone is connected. Phone book: up to 1000 entries Up to 20 entries including dialed calls, received calls, and missed calls
2. Select a dialing method.
   • : Call using call records
   • : Call using the phonebook
   • ★: Call using the preset number
   • 12 : Call by entering a phone number
   • : Voice Recognition (P.32)
   • : Bluetooth SETUP

1. Touch .
2. Select the phone number from the list.

1. Touch 12 .
2. Enter a phone number with number keys.
3. Touch .

1. Touch *.
2. Touch the Name or phone number from the list.

1. Touch TEL.
2. Select the person you want to call from the list.
3. Select the phone number from the list.

NOTE

• If no Phonebook has been downloaded, touching Download Phonebook Now will start downloading the Phonebook.

1. Press the VOICE button.
2. Start speaking.

NOTE

• You can use voice recognition function by touching VOICE on the Hands Free screen.

1. Touch Green phone icon to answer a phone call or Red phone icon to reject an incoming call.

NOTE

• While monitoring the view camera, this screen does not appear even if a call comes in. To display this screen, return the shift knob of car to the driver position.

1. While talking, touch Red phone icon.

Press the – or + button.

Touch DTMF to display the tone input screen. You can send tones by touching desired keys on the screen.

Touching Speaker icon each time switches the speaking voice output between cell-phone and speaker.

When you receive a call while talking on another call, you can answer the newly received call by touching Call waiting icon. The current call is on hold.

Each time you touch Call waiting icon, the caller will change.

When you touch Red phone icon, the current call will end and switch to the call in hold.

1. Touch *.
2. Touch Edit.
3. Select where to preset.
4. Select how to preset.

To delete a preset number, touch Delete and then touch Yes on the confirmation screen.

To delete all preset numbers, touch Delete all and then touch Yes on the confirmation screen.

Select the number to preset from the phonebook. See Call using the phonebook (P.32).

Enter the telephone number directly and touch SET. See Call by entering a phone number (P.31).

1. Touch TEL.
2. Touch Download icon.

The phonebook data transmission starts.

NOTE

• If the Phonebook contains more than 1000 entries, Phonebook data cannot be transferred.

1. Touch Download icon.
2. Touch Yes.

1. Press the MENU button.
2. Touch Camera icon.

1. Press the MENU button.
2. Touch SETUP.
3. Touch Camera.
4. Set each item as follows.

1. Touch ON of Parking Guidelines in the Camera screen. (P.35)
2. Touch Guidelines SETUP in the Camera screen.
3. Adjust the parking guidelines by selecting the + mark.
4. Adjusting the position of the selected mark.

NOTE

• Touch Initialize and after touch Yes to set all the + marks to the initial default position.

1. Connect an external component to the AV-IN input terminal. (P.50)
2. Select AV-IN as the source. (P.9)
3. Turn on the connected component and start playing the source.

1. Press the MENU button.
2. Touch Display icon.
3. Adjust each item as follows.

1. Press the MENU button.
2. Touch SETUP.

See the following section for each setting.

• Set up AV (P.40)
• Set up display (P.39)
• Set up the user interface (P.38)
• Set up camera (P.35)
• Set up special (P.39)
• Set up Bluetooth (P.28)
• Set up Device (P.14)

1. Press the MENU button.
2. Touch SETUP.
3. Touch User Interface.
4. Set each item as follows.

1. Touch Steering Remote Controller in the User Interface screen.
2. Touch the function you want to set.
3. Press and hold the steering remote controller button.
4. Repeat steps 2 and 3 as necessary.
5. Touch Return icon.

NOTE

• You can have the unit learned all buttons at a time. In that case, press the all buttons one at a time and after pressing all of them, touch Return icon in Steering Remote Controller screen. However, new functions cannot be learned after this operation.

NOTE

• When changing the function already learned, select the function from the function list in step 2 and then press and hold the button you want to change.

• Confirm the contents of the settable function on the function list. You cannot edit the function list.

1. Press the MENU button.
2. Touch SETUP.
3. Touch Special.
4. Set each item as follows.

Touch Initialize and then touch Yes to set all the settings to the initial default settings.

1. Touch Software Information in the Special screen.
2. Confirm the software version.

1. Press the MENU button.
2. Touch SETUP.
3. Touch Display.
4. Set each item as follows.

1. Touch Background in the Display screen.
2. Select an image.

You can load an image from the connected USB device and set it for the background image. Before operating this procedure, it is necessary to connect the device which has the image to load.

1. Touch User1 Select or User2 Select in the Background screen.
2. Select the image to load.
3. Touch Enter.

NOTE

• Touching Left arrow icon rotates counter clockwise.

• Touching Right arrow icon rotates clockwise.

• Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP (.bmp)

1. Press the MENU button.
2. Touch SETUP.
3. Touch AV.
4. Set each item as follows.

You can adjust the various settings such as audio balance or subwoofer level.

1. Press the MENU button.
2. Touch Audio settings icon.

See the following section for each setting.

• Set up speaker/ X’over (P.41)
• Controlling equalizer (P.43)
• Set listening position/ DTA (P.45)
• Controlling general audio (Fader / Balance) (P.42)
• Set volume offset (P.44)
• Set sound effect (P.44)

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Speaker/X’over.
4. Select a car type.
5. Touch the speaker (1) you wish to adjust and set each item (2) as follows.

You can set a crossover frequency of speakers.

1. Touch X’over.
2. Touch the speaker to set.
3. Set each item as follows.

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Fader / Balance.
4. Set each item as follows.

You can adjust equalizer by selecting the optimized setting for each category.

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Equalizer.
4. Touch the screen and set the Graphic Equalizer as desired.

1. Touch Preset Select.
2. Select EQ curve.

1. Adjust the EQ curve.
2. Touch Memory.
3. Select where to save.

Finely adjust the volume of the current source to minimize the difference in volume between different sources.

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Volume Offset.
4. Touch + or – to adjust the level.

You can set sound effects.

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Sound Effect.
4. Set each item as follows.

Adjust the sound delay time as nearer speakers to the selected seat have more delay time, so that the sound from each speaker arrive a listener at the same time.

1. Press the MENU button.
2. Touch Audio settings icon.
3. Touch Position/DTA.
4. Select listening position from Front R (Right front), Front L (Left front), Front All (All front), and All.
5. Touch Level.
6. Touch + or – to adjust the sound level of the selected speaker.

You can fine-adjust your listening position.

1. Touch Adjust.
2. Touch Delay.
3. Touch + or – to adjust the delay time of the selected speaker.

NOTE

• To return to the initial setting of Delay and Level, touch Initialize and Yes in the confirmation screen.

Switches to the source to be played.

Plays or pauses. For the radio sources, switches the seek mode.

When a call comes in, answers the call.

Adjusts the volume.

During tuner source, select FM/ AM band to be received. For the SiriusXM source, selects the band to be received (Except DMX5020S).

Selects the track or file to be played. For the tuner radio and SiriusXM (Except DMX5020S) sources, switches to broadcast stations received by the unit.

Mutes/restores the sound

Allows you to enter the number to search in the direct search mode. For details on the direct search mode, see Direct search mode (P.46).

Switches to the direct search mode. For details on the direct search mode, see Direct search mode (P.46).

1. Press the #BS/DIRECT button several times until the desired content appears.
2. Enter the number of the content you want to play using the numeric keypad.
3. Press the Track forward or backward button.

WARNINGS

• If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
• Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.

CAUTION

• Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

NOTE

• Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12V DC power supply.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
• If the power is not turned ON (“There is an error in the speaker wiring. Please check the connections.” is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.
• If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained.
• If the console has a lid, make sure to install the unit so that the front panel will not hit the lid when closing and opening.
• If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the – wires or ground them to any metal part in the car.
• When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the – connector to a rear output terminal.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
• Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result.
• Reception may drop if there are metal objects near the Bluetooth antenna.

Supplied accessories for installation are:

[1] Except DMX5020S

1. To prevent a short circuit, remove the key from the ignition and disconnect the – terminal of the battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the wire on the wiring harness.
4. Take Connector B (accessory 8) on the wiring harness and connect it to the speaker connector in your vehicle.
5. Take Connector A (accessory 7) on the wiring harness and connect it to the external power connector on your vehicle.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
8. Reconnect the + terminal of the battery.
9. Press the reset button.

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

NOTE

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

Use Car Bracket (5 or 6).

1. Attach accessory 2 to the unit.

1. Check the installation position of the microphone (accessory 1).
2. Clean the installation surface.
3. Remove the separator of the microphone (accessory 1), and stick the microphone to the place shown below.
4. Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.
5. Adjust the direction of the microphone (accessory 1) to the driver.

Fix a cable with a commercial item of tape.

NOTE

• Swap the clips if necessary.

1. Remove the trim plate by referring to step 1 in “Removing the trim plate”.
2. Insert the extraction key (accessory 9) deeply into the slot as shown. (The protrusion at the tip of the extraction key must face toward the unit.)
3. With the inserted extraction key secured, insert the other extraction key into the slot.
4. Pull out the unit halfway.
5. Pull the unit all the way out with your hands, being careful not to drop it.

NOTE

• Be careful to avoid injury from the catch pins on the extraction key.

1. Use the extraction key (accessory 4) to lever out the four tabs (two on the left part, two on the right part).
2. Pull the trim plate forward.

The car antenna is not extended.

➤ Pull out the antenna all the way.

The antenna control wire is not connected.

➤ Connect the wire correctly. See Connecting wires to terminals (P.50).

The random play function is enabled.

➤ Turn off the random function.

The recording condition is bad.

➤ Record the file again or use another USB memory.

The preout jack is being used.

➤ The Touch Sensor Tone cannot be output from the preout jack.

The USB device is selected as a source although no USB device is connected.

➤ Change the source to any source other than USB.

➤ Connect a USB device, and change the source to USB again.

The Bluetooth audio player is selected as a source although no Bluetooth audio player is connected.

➤ Change the source to any source other than Bluetooth.

➤ Connect an Bluetooth audio player, and change the source to Bluetooth again.

The connected USB device contains no playable audio file. Media was played that doesn’t have data recorded that the unit can play.

➤ See Playable Media and Files (P.54) and try another USB device.

A SiriusXM tuner is not connected to this unit.

➤ Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio.

The SiriusXM subscription has been renewed.

➤ Touching [Return] on the popup screen will clear the message.

The currently selected channel is unavailable.

➤ Visit http://www.siriusxm.com for more information about the SiriusXM channel lineup.

The currently selected channel is not subscribed to.

➤ In the U.S.A., visit http://www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel.

➤ In Canada, visit http://www.siriusxm.ca or call 1-877-438-9677.

No antenna is connected to the SiriusXM tuner.

➤ Check that an antenna is connected to the SiriusXM tuner. Check antenna for damages.

No SiriusXM radio signal is received.

➤ Verify that your vehicle is outdoors with a clear view of the sky.

The selected channel has been locked by the parental controls.

➤ Enter the unlock code when you are asked. See Parental Control (P.25).

The selected channel is a mature or parental lock channel, and locked by the parental lock or user lock code.

➤ Enter the correct lock code.