IMPACT PLB-400SBS (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD IMPACT PLB-400SBS (01) PDF MANUAL


PDF Content Summary: Introduction Thank you for choosing Impact. The PLB-400SBS vinyl backgrounds allow you to add a white, black, or blue backdrop to the side of the PLB-400 Photo Booth. While you light your subject from the front of the booth, the backgrounds allow you to cover the booth’s reflective side panel and shoot your subject through a side flap. Attaching the Side Background The included white, black, and blue vinyl backgrounds are long enough to cover the side and bottom of the booth. 1. Use the hooks to attach the clips along the top rod on the side of the boot. 2. Insert the edge of the background into the clips to hold it in place. 3. Unroll the background along the length of the side and bottom of the booth. PLB-400 Side Background Mounting Instructions One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit impactstudiolighting.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. gradusgroup.com Impact is a registered trademark of the Gradus Group. ©2020 Gradus Group LLC. All Rights Reserved. GG1


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply