FREE ENGLISH ILIFE ILIFE-V8S (01) PDF USER GUIDE
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF USER MANUAL
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF OWNER GUIDE
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF OWNER MANUAL
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF REFERENCE GUIDE
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF REFERENCE MANUAL
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ILIFE ILIFE-V8S (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ILIFE ILIFE-V8S (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ILIFE ILIFE-V8S (01) PDF SUMMARY:
What should I do before using the product?
Read the user manual thoroughly and carefully before using the product. Keep the user manual.
What should I do to ensure best usage of the robot vacuum?
Place the charging dock against the wall in a wide open area. Do not put the charging dock near a door or stairs. Remove excess clutter on the floor before cleaning (e.g. electrical cords, cables, small objects, etc…).
When should I choose MAX mode?
Choose MAX mode to clean an area of highly concentrated dirt and dust.
How do I maintain peak performance?
Clean the side brush and ventilation unit when they become dirty and replace them if they become damaged. Remove the nose wheel and holder by pulling the wheel straight up, and clean the debris and hair from the wheel cavity as well as the axle that holds the wheel in place once a month. Empty the dust bin and clean the filter after each use. Replace the filter every month.
How do I clean the robot vacuum?
Do not submerge the robot or spray it with water. Clean with a dry cloth only.
What safety instructions should I be aware of before using the product?
Only certified technicians may disassemble the product. Users are not allowed to disassemble or repair the product. Only use the AC adapter provided by the factory. Using other AC adapters may cause electric shock, fire, or product damage. Do not touch the power cord, plug, or adapter when your hands are wet. Keep loose clothing and fingers away from being drawn into the product’s wheels. Keep the robot vacuum away from all flammables. Never clean the robot while it is on the charging dock or plugged in directly. Unplug the robot and turn off the power switch when cleaning. Keep the AC power cord tucked away from becoming damaged in any way. This product is to be used only indoors, and is not intended for outdoor use. Do not sit on top of the product or attach an object on the top of it. Do not use this product in wet or moist environments. Before use, remove all the objects that could get caught in the brushes or suction passage. Do not place this product on furniture or platforms where it can fall and be damaged. Turn the power switch off when not in use for a long period of time or when transporting the unit. To avoid battery damage, check whether the adapter and outlet are properly connected. To avoid any tripping hazards or injuries, inform all the people in the house when this product is in use. Do not use this product when the dust bin is full. Normal operating temperatures are -10 to 50 degrees Celsius. Do not operate this product in high temperature environments. The battery must be removed from the product before it is scrapped. Unplug the vacuum from the power source when removing the battery. The battery is to be disposed of safely. Use only a factory-authorized battery, and do not use an unmatched battery.
Who should not use this product?
This product is not a toy and should not be used by children or people with lack of related experience or knowledge.
What is included in the product composition?
The main body (battery included), charging home base, remote control (battery not included), power adapter, water tank, mop cloth, cleaning tool, user manual, extra side brushes, and high effective filter.
What are the parts of the robot vacuum?
Self-charge button, timer, cliff sensors, bumper, point mode button, clean/pause button, path mode button, charging pin, battery lid, side wheels, nose wheel, side brushes, dustbin/water tank, dustbin release button, power switch, and DC-in.
What is included in the dustbin?
High effective filter, sponge, primary filter, and dustbin cover.
What is included in the water tank?
Water input hole, water tank, mop bracket, and mop cloth.
What are the functions of the robot panel buttons?
Clean/pause button, path mode button, timer button, self-charge button, and point mode button.
What icons are on the display panel?
Timer, point mode, self-charge, dustbin malfunction, side brush malfunction, trouble alerts, battery, border mode, and time display.
What are the mechanical specifications of the robot?
Diameter: 330mm. Height: 80mm. Net weight: 2.7kg.
What are the electrical specifications of the robot?
Voltage: 14.4V-14.8V. Battery: Li-ion 2600mAh. Power: 22W. Charging type: Auto Charging/Manual Charging.
What are the cleaning specifications of the robot?
Capacity of dustbin: 0.75L. Capacity of water tank: 0.3L. Cleaning modes: Classical/Spot/Edge/Daily Schedule. Duration per recharge: <300 mins. Duration per cleaning: 80 mins.
What type of buttons does the robot have?
Mechanical buttons.
What type of display panel does the robot have?
LCD Screen.
How do I use the remote control?
Press the clean/pause button to switch the robot from sleep mode to select mode, and to start cleaning, or to pause the robot during operation. Press the forward direction button to move the robot forward (Note: The forward button doesn’t work during operation of the robot). Press the MAX mode button to increase the suction level under cleaning mode, and to change different levels of water dropping speed under mopping mode. Press the left and right direction buttons to turn the robot left and right. Press the self-charge button to return the robot to the charging dock. Press the border cleaning button to start border cleaning. Press the point mode button to start point cleaning. Press the path mode button to start cleaning under path mode. Install two AM/R03 batteries before using the remote control, and take out the batteries if the remote control won’t be used for a long time.
How do I place the charging dock?
Connect the adapter with the charging dock. Place the charging dock against the wall horizontally, with no object on the left and right side within one meter and in the front within two meters. There must be no reflective object such as a mirror around the dock. Connect the power.
How do I turn on the robot?
Turn on the power button on the side, “-” for ON, “0” for OFF. The signal light of the dock will light up when the charging dock is connected to the adapter. After the robot finishes its work, do not turn it off, keep it recharged for next run.
How does auto charging work?
Under auto mode, the robot will automatically search for the charging dock when the power is low. Under the selected mode, the robot will begin to search for the charging dock when the respective button on the remote control is pressed.
How does manual charging work?
Turn on the power button on the side of the robot, connect the adapter with the robot, and then plug the adapter into the power socket. Keep the charging contact points clean in daily use to ensure a good connection. The charging dock should be connected to the power and the main switch is on. If you won’t use the robot for a long time, fully charge it, turn off the power, and store it in a well-ventilated dry place. Do not use manual recharge mode under the schedule mode, otherwise, the robot can’t perform the function of schedule mode. Charge for 12 hours for the first time. Leave the robot on the charging dock in daily use and make sure that the charging dock is connected to the power and the main switch is on.
What are the different robot modes?
Sleeping mode: the power button is ON, the main switch and display panel does not light up, and the robot is in the pause status. Selected mode: the power button is ON, the main switch pulses and the display panel lights up, and the robot is in the pause status. Cleaning mode: the robot is in the status of operation, the green light is on, and the display panel displays the status of operation.
How do I start the robot?
Make sure that the power switch on the side of the robot is “ON”. Press the clean/pause button on the robot or remote control to start operation.
How do I pause the robot?
“Pause” will switch the robot from cleaning mode to select mode, and it can be enabled by pressing the button on the remote control or the button on the robot.
How do I enter sleep mode?
Press the clean/pause button for three seconds, or the machine will automatically enter sleep mode if no action is taken for 3 minutes. If the robot is in sleep mode, press the clean/pause button to wake up the robot and enter select mode, then press the clean/pause button once again, and the robot will automatically start operation. You can operate the machine again after it’s paused.
How do I set up the clock time?
When the vacuum is turned on, it will beep while pressing the timer button for 2 seconds, and the hour part on the display screen will blink, showing that it has entered the state of time setting. Use the direction buttons to adjust the time numbers. Press the timer button to switch between hour, minute, 12/24 hour and week. When the time setting is completed, press the self-charge button to save the setup.
How do I set up a 12/24 hour format?
Press the point mode button to switch between 12/24 hour format, and the display screen will show ON/OFF respectively.
How do I set up a schedule cleaning timer?
When the vacuum is turned on, quickly press the timer button, it will beep and the signs of “0” and “DAY” on the display screen will blink, showing that it has entered the state of schedule setting mode. Press the timer button to switch between hours and minutes. Press the direction buttons to adjust the time numbers. When the schedule setting is completed, press the self-charge button to save the setup.
How do I cancel the schedule?
When the machine is turned on, quickly press the timer button, it will beep and the signs of “0” and “DAY” on the display screen will blink, showing that it has entered the state of schedule setting mode. Press the point mode button to cancel the day schedule, and the display screen will show “—-”. If the point mode button is pressed again, the schedule will be opened, and the display screen will show the previous schedule time.
What should I be aware of when setting up a schedule?
The robot will exit the setting mode automatically after 15 seconds without any operation, and the setup will not be saved. The current setting will not succeed if the self-charge button isn’t pressed. If the power switch at the side of the robot is turned off, the schedule will be lost and need to be reset.
How do I use the Clean/Pause button on the robot?
Press the button when in select mode to start cleaning. Press the button to pause the robot during its operation.
How do I use the path mode button on the robot?
Press the button to switch the robot from sleep mode to select mode. Press the button under select mode to start cleaning in path mode. Press the button to pause the robot during its operation.
How do I use the direction buttons on the robot?
Under selected mode or cleaning mode, press the self-charge button to let the vacuum go back to the charge station, or increase the number under schedule/time setting mode. Under select mode or cleaning mode, press the point mode button to start spot cleaning, or to decrease the number under schedule/time setting mode.
What are the different cleaning modes?
Auto mode, point mode, border mode, and path mode.
How does auto mode work?
Auto cleaning mode cleans home automatically and does a clean to places it can reach. You can use the remote control to switch between various modes. You need to make sure that the robot is awake before starting any of the following modes, the power is on, the button light is green, the display panel is on, and the robot is paused. Press the clean/pause button on the robot or remote control to enter auto mode.
How does point mode work?
Place the robot near the required area, and then press the point mode button on the robot or remote control to start cleaning in point mode.
How does border mode work?
Place the robot near the required area, and then press the border mode button on the remote control to start cleaning in border mode.
How does MAX mode work?
If there is heavy dust during the cleaning process, press the max mode button on the remote control and “HI” will show up on the display panel to enhance the vacuum power for deep cleaning. Press again to switch back to normal vacuum power, and “LO” will show up on the display panel.
How does path mode work?
Press the path mode button on the robot or remote control, the robot starts cleaning in path mode, and automatically calculates the missing area during the cleaning process, cleaning more efficiently.
How does mopping mode work?
Under mopping mode, the robot will start mopping from the first 7m * 7m small areas in front of the start position. During the process of mopping, press the max mode button on the remote control to switch the speed of water dropping.
How does self-charge mode work?
The robot can sense lower power during the cleaning process and automatically activate self-charge mode and search for the charging dock. You can also use the self-charge button on the robot or the remote control to command the robot to activate the mode.
When should I use the water tank components?
If there is a demand for the mop, it is recommended to clean the area with the dustbin first. Then change the dustbin to the water tank components to carry out the mop work.
What should I do during the mopping process?
If during the mopping process the robot is stopped to either add water or clean the mop, the robot will reset and plan a new pathway from where it is started. In order to achieve a better cleaning, it is recommended for single room use. When cleaning a second room, it is recommended to manually move the robot to the corresponding room and add water and clean the cloth as needed. Be sure to remove the water tank components when charging. Please do not use the water tank components on the carpet or rugs. Please fold the edge of the rugs or block carpet areas to avoid cleaning them during mopping mode. Please pay attention during the mopping mode and timely add water or clean the mopping pad. The water tank needs to be removed when adding water.
How do I add water to the water tank?
Open the water injection cap, fill the water with the water cup, and pour the water slowly into the tank. Close the water injection cap tightly.
How do I place the mop cloth?
Put on the mop cloth and strap the two elastic bands.
How do I install the water tank components?
Press the button at the end of the dustbin, remove the dustbin, and replace it with the water tank components.
How do I start mopping the floor?
Install water tank components and mop cloth, add water according to the user’s demand, and the robot will perform mopping.
How do I clean the side brush and suction inlet?
Clean the side brush and suction inlet when they are dirty and replace them if needed.
How do I clean the dustbin and filter?
Clean the dustbin and filter after each use of the robot. Remove the dustbin and check if there is any debris in the suction inlet, and then clean it. A primary filter is replaceable and should be washed with water after having been in use for about 15-30 days, after which it should be dried in a cool and well-ventilated place and not be squeezed. The high effective filter can not be cleaned with water, but to prolong the life of the filter it can be cleaned by shaking the filter. Turn off the robot and unplug the charging dock when cleaning the robot and its accessories.
How do I clean the mop cloth?
After mopping, remove the water tank components and the mop cloth. Rinse and air dry the mop cloth.
How do I clean the water tank?
After mopping, remove the mop cloth and the components, and drain the remaining water in the water tank. Dry the water tank by hand and then air dry it.
How do I clean the sensors and charging contact points?
Use a cleaning tool or soft cloth to clean the sensors or charging contact points. The charging contact points should be cleaned in a timely manner if it’s contaminated.
How do I clean the front wheel?
Make sure the front wheel housing is not jammed by debris, otherwise the robot’s cleaning performance will be affected. Pull the wheel up and out vertically and clean the wheel, wheel holder, and wheel housing.
How often should I replace the accessories?
Dustbin: after each use (no replacement). High effective filter: bi-monthly, or weekly (twice a week for families with pets). Spinning side brush: weekly (replace as needed). Charging dock: weekly (no replacement).
What should I do when I see a warning code on the display panel?
When a problem happens, the red light will be on and short prompt tones will sound.
What does error code E11 mean?
Left wheel malfunction. Check the left wheel.
What does error code E12 mean?
Right wheel malfunction. Check the right wheel.
What does error code E13 mean?
Left side brush malfunction. Check the left side brush.
What does error code E14 mean?
Right side brush malfunction. Check the right side brush.
What does error code E21 mean?
Robot suspended. Put the robot on the floor.
What does error code E22 mean?
Lower view component malfunction. Clean the lower view sensor.
What does error code E23 mean?
Bumper malfunction. Check the bumper.
What does error code E31 mean?
The robot is trapped. Move the robot to an open space and restart it.
What does error code E32 mean?
Dustbin malfunction. Check the dustbin.
What does error code E33 mean?
Water container malfunction. Check the water container.
What does error code E41 mean?
Battery malfunction. Restart the robot.
What does error code E42 mean?
Front view component malfunction. Check the front view component.
What does error code E43 mean?
Gyro module malfunction. Restart the robot.
What does the dustbin icon mean?
The dustbin is full or the filter needs to be cleaned. Clean the dustbin or the filter.
What does the LO icon mean?
Low Battery. Recharge.
What should I do if the problem remains unresolved?
Switch the power button on the side of the robot off and on and restart it. If the problem remains unresolved after restart, please contact ILIFE customer service.
CLICK HERE TO DOWNLOAD ILIFE ILIFE-V8S (01) PDF MANUAL