IGLOO IE27DC (01) PDF Document

Based on the provided diagrams, please adhere to the following safety precautions:

• This appliance is suitable for use in a vehicle.

• Do not expose the cooler to rain or immerse it in water.

• Do not store corrosive or solvent-containing substances in the cooler.

• Ensure the ventilation slots are not covered to prevent overheating.

• Do not use the cooler if the power cord is visibly damaged.

• Repairs on the cooler should only be carried out by qualified personnel.

• Do not pull on the power cable to unplug it from the socket.

To replace the 6.3 A fuse in the 12V plug, follow these steps:

1. Unscrew the adapter sleeve from the plug by turning it counter-clockwise.

2. Remove the sleeve.

3. Remove the metal contact tip.

4. Take out the old fuse.

5. Dispose of the old fuse properly.

6. Insert a new 6.3 A fuse.

7. Re-insert the metal contact tip.

8. Place the spring back onto the assembly.

9. Re-attach the adapter sleeve.

10. Push the sleeve on completely.

11. Screw the sleeve back on by turning it clockwise until it is tight.

12. The plug is now ready to be used.

To open the lid, lift it upwards. The lid can be opened to a maximum angle of 90 degrees (≤ 90°). To keep the lid open, ensure you open it to an angle greater than 65 degrees (> 65°), which will engage the lid stay.

The IGLOO IE27DC operates on a 12 V DC power supply. To use it, connect the power cord to the 12 V socket in your vehicle, such as the cigarette lighter socket.

The cooler is designed to maintain an internal temperature of 5°C or higher (≥ 5°C) when the outside ambient temperature is 25°C.