ICLEVER IC-BK06 (01) PDF Document

Step 1. Unfold the keyboard to power on.

Step 2. Press “fn” + “Q” keys to choose Bluetooth Channel 1.

Step 3. Press “fn” + “Z” keys to Bluetooth Pairing mode, and the indicator will keep flashing blue.

Step 4. On your device, find the name “iClever IC-BK06 Keyboard” and click to connect it.

Step 1. Press “fn” + “W” keys to choose Bluetooth Channel 2.

Step 2. Press “fn” + “Z” keys to Bluetooth Pairing mode, and the indicator will keep flashing blue.

Step 3. On your device, find the name “iClever IC-BK06 Keyboard” and click to connect it.

Step 1. Press “fn” + “E” keys to choose Bluetooth Channel 3.

Step 2. Press “fn” + “Z” keys to Bluetooth Pairing mode, and the indicator will keep flashing blue.

Step 3. On your device, find the name “iClever IC-BK06 Keyboard” and click to connect it.

Click Win > Setting > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth > Click “iClever IC-BK06 Keyboard” to connect.

Click Setting > Bluetooth > Click “iClever IC-BK06 Keyboard” to connect.

Click System Preferences > Bluetooth > Click “iClever IC-BK06 Keyboard” to connect.

Press “fn” + “Q/W/E” keys to switch among connected devices.

Step 1. Press “fn” + “Q/W/E” keys to choose the Bluetooth channel that you wan to re-pair,

Step 2. Press “fn” + “Z” keys to Bluetooth mode AGAIN to re-pair.

The table below describes special key combinations for different operating systems for the ICLEVER IC-BK06:

It work as keyboard display when your system is iOS.

NOTE: does not work for iOS only.

This key works as “win” when your system is Windows.

This key works as “option” when your system is iOS/Mac.

This key works as “alt” when your system is Windows/Android.

This key works as “command” when your system is iOS/Mac.

Press “fn” + [ to work as page up.

Press “fn” + ] to work as page down.

Press “fn” + \ to work as home.

Press “fn” + Enter to work as end.

Switch function: press “fn”+ “Q” keys to switch to Bluetooth channel 1.

Switch function: press “fn”+ “W” keys to switch to Bluetooth channel 2.

Switch function: press “fn”+ “E” keys to switch to Bluetooth channel 3.

Pairing function: press “fn”+ “Z” keys to Bluetooth pairing mode.

The “fn” key is used in combination with other keys to access special features.

-Windows 8 or late PC/laptop/tablet.

-Android 6.0 or late smartphone/tablet

-iOS 9.0 or late iPhone/iPad

-Mac OS X 10.8 or later Mac

NOTE: Do not compatible with Mac mini, Mac studio, XBOX, Samsung Smart TV, Nokia Phones and Bluetooth adapter.

The keyboard will enter sleep mode after being idle for 30 minutes.

To activate it, by pressing any key and wait for 3 seconds.

If your keyboard stop working, please try to charge the keyboard by our included charging cable PC/laptop port. If you prefer to connect charging cable with adapter, before to use, please check your adapter voltage is not higher than 5V.

Note:

Keyboard output: DC 5V/200mA; USB charger is not included.

— In charging process, the indicator light will light up red when charging. Generally, it takes about 2 hours to get fully charged.

Keep away from sharp objects.

Keep away from microwave radiation source or the similar source.

Do not stack by heavy objects.

Do not impact or bend the keyboard.

Keep away from oil, chemical or other organic solvent.

Power off the keyboard if not in use.

1. Charge the keyboard for 2 hours.

2. Verify the product is connected directly to the computer and not to a Bluetooth adapter

3. Make sure that your iClever device and computer are within close proximity of each other.

4. Try moving away at least 8 inches (20 cm) from metal and other sources of wireless signal.

5. Delete all the Bluetooth connection records. (For example, for iPad, click “Settings” > “Bluetooth” > under “MY DEVICE” to delete all the Bluetooth connection records)

6. On your device, turn off the Bluetooth and turn it on again to Refresh. (For example, for iPad, click “Settings” > “Bluetooth” > if the on-screen switch beside Bluetooth currently shows as ON, tap it twice to refresh it)

7. Connect it again.

The most common cause of typing lag are lack of memory, signal interference and low battery. Please try as below to check:

1. Restart your Bluetooth device.

2. Charge the keyboard for 2 hours.

3. Make sure that your iClever device and computer are within close proximity of each other.

4. Try moving away at least 8 inches from:

– Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router

– Computer power supplies, Metal or metal wiring in the wall

5. Do not use your wireless keyboard on metal surfaces.

6. Check if there are any updates running in the background.

7. Check your computer memory, insufficient memory may cause the delay.

8. Try on a different APP/device to connect or email us.

Press “caps lock” key to switch between uppercase and lowercase. When the indicator is on, it is uppercase.

Press “fn” + “Z” keys to pair, and the indicator will keep flashing blue.

Unfold the keyboard to power on; it will light in green for 3 seconds.

Stay in red when charging.

Press “fn” + “F12” keys to check the battery, and each flash represents 25% battery reminding, 4 flashes in total.

The Bluetooth pairing name may appear as “Keyboard” in Windows 10.

The keyboard will connect with the last-used device automatically.

Do not connect it via a Bluetooth adapter.