Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: CT40 Series powered by AndroidTM Quick Start Guide CT40-A-EN-QS-01 Rev E 06/20 Out of the Box Make sure that your shipping box contains these items: • Mobile Computer Model CT40-L0N, CT40-L1N, CT40P-L0N, or CT40P-L1N • Rechargeable Li-ion battery (see page 7) • Hand strap • Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: CT40-L0N/CT40P-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSDTM or microSDHCTM memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. 1

Mobile Computer Features Imager Window (LED/Laser Aperture) Speaker Microphone Scan Status LED Touch Panel Push-to-Talk Button (model dependent) Scan Button Scan Button Front Facing Camera (model dependent) Microphone Speaker Battery Status/ Notification LED Power Button 2

Note: Hand strap not shown. Laser Safety Label Location Camera Lens and Flash BLE port In BLE Speaker Out (model dependet) (model dependent) Volume Button Scan Button SIM Card Door MicroSD Card Door USB, Type C (model dependent) Audio Jack Pin (model dependent) I/O Connector 3

Battery Battery Latch (Model CT40-xxx-xxxxx0x) Latch (Models CT40-L0N-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) Battery (Refer to page 7) 4

Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card. 1 2 3 45 5

Install a microSIM Card Note: Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. Note: Always power off the computer before attempting to install or remove a card. 1 2 3 45 6

About the Battery The mobile computer ships with a Li-ion battery manufactured for Honeywell International Inc. Model Configuration Battery P/N Power CT40-xxx-xxxxx0x 318-005-011 3.8 VDC, 15.5 watt-hour CT40-xxx-xxxxxHx 318-055-017 3.8 VDC, 15.5 watt-hour CT40-LON-xxxxxAx 318-055-015 3.85 VDC, 15.5 watt-hour CT40-xxx-xxxxxBx CT40P-xxx-xxxxxHx TBD 3.85 VDC, 15.5 watt-hour CT40P-L0N-xxxxxAx 318-055-067 3.85 VDC, 15.5 watt-hour CT40P-xxx-xxxxxBx Configuration number (CN) is located on the label in the battery well of the mobile computer. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons l’utilisation de batteries Li-ion de la marque Honeywell. L’utilisation d’une batterie d’un autre fabricant est susceptible de provoquer des dommages non couverts par la garantie. Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant d’insérer la batterie dans l’ordinateur. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie. 7 Install Battery (Model CT40-xxx-xxxxx0x)

12 3 4 5 8

Install Battery (Models CT40-LON-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) 1 2 9 Install the Hand Strap 1 2 3 4 10 Charge the Mobile Computer The Charge minimum battery mobile increases the of computer battery 4 hours. the with time Using ships a CT40 required with the series computer a partially to charging reach while charged a full device charging charge. battery. for the a We power accessories covered recommend adapters. by the or power warranty. the Use use of adapters any of Honeywell non-Honeywell may cause accessories damage and not Nous adaptateurs L’utilisation d’une dommages recommandons autre non marque de secteur tout couverts accessoire est de d’utiliser marque susceptible par la ou des garantie. Honeywell. adaptateur accessoires de provoquer secteur et des des CT40 following HomeBase, Vehicle series Power CT40 ChargeBase, mobile Adapter, charging computers Vehicle accessories: NetBase, are Dock, designed Quad and HomeBase, Battery USB for Adapter. use Charger, Ethernet with the Ensure computers Mating covered all wet by components and the components warranty. batteries are may with dry cause peripheral prior damage to mating devices. not the Assurez-vous avant des humides couverts périphériques. de raccorder risque par la que garantie. de tous provoquer L’insertion les ordinateurs les composants des de composants dommages et les sont batteries secs non à 11 Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on: • Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off: 1. Press and hold the Power button until the options menu appears. 2. Touch Power Off. Battery Replacement Before removing the battery, always do one of the following: • Power off the computer. • Place the unit in Swap Battery mode (feature availability is model dependent). Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode: 12 1. Press and hold the Power button until the options menu appears. 2. Touch Swap Battery and follow the on-screen instructions. 3. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the toward the top of the display to unlock the computer. Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity: 1. Swipe up on the touch screen. 2. Select Settings > Display > Advanced > Sleep. 3. Select the amount of time before the display goes to sleep. 4. Touch to return to the Home screen. 13 About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar To learn how to customize the Home screen, see the user guide. Navigation Buttons 14 Navigation and Function Buttons Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. Volume Press the top of the button to raise the speaker volume. Press the bottom of button to lower the speaker volume. Scan Press left or right Scan button to trigger the scanner. Power See page 13. Push-to-Talk Push-to-Talk button is model dependent. For button locations, see Mobile Computer Features on page 2. To learn more about how to re-map a button, see the user guide. 15 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. 1. Swipe up on the screen. 2. Select Demos > Scan Demo. 3. Point the computer at the barcode. 4. Touch Scan on the screen or press and hold any Scan button. Center the aiming beam over the barcode. The decode results appear on the screen. Note: In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. 16 Sync Data To move files between your CT40 and a computer: 1. Connect the CT40 to your computer using a USB charge/ communication accessory. 2. On the CT40, swipe down from the top of the screen to see the notifications panel. 3. Touch the Android System notification twice, to open the options menu. 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the CT40. You can now copy, delete, and move files or folders between your computer and CT40 as you would with any other storage drive (e.g., cut and paste or drag and drop). Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser. 17 Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to Documentation Product documentation is available at 18 Limited Warranty For warranty information, go to and click Resources > Product Warranty. Patents For patent information, see Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright © 2018-2020 Honeywell International Inc. All rights reserved. 19







Leave a Reply