HIKVISION DS-7208HQHI-K1 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD HIKVISION DS-7208HQHI-K1 (01) PDF MANUAL


PDF Content Summary: Digital Video Recorder User Manual Network Video Recorder User Manual User Manual COPYRIGHT ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to Digital Video Recorder (DVR). The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website ( overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 1 Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. Network Video Recorder User Manual 2 Network Video Recorder User Manual Applicable Models This manual is applicable to the models listed in the following table. Series Model DS-7200HGHI-K1 DS-7216HGHI-K1 DS-7200HGHI-K2 3 DS-7216HGHI-K2 DS-7224HGHI-K2 DS-7232HGHI-K2 DS-7100HQHI-K1 DS-7104HQHI-K1 DS-7108HQHI-K1 DS-7116HQHI-K1 DS-7200HQHI-K1 DS-7204HQHI-K1 DS-7208HQHI-K1 DS-7216HQHI-K1 DS-7200HQHI-K1/E DS-7204HQHI-K1/E DS-7208HQHI-K1/E DS-7216HQHI-K1/E DS-7200HQHI-K2 DS-7208HQHI-K2 DS-7216HQHI-K2 DS-7224HQHI-K2 DS-7232HQHI-K2 DS-7200HQHI-K/P DS-7204HQHI-K1/P DS-7208HQHI-K2/P DS-7216HQHI-K2/P DS-7300HQHI-K4 DS-7304HQHI-K4 DS-7308HQHI-K4 DS-7316HQHI-K4 DS-7324HQHI-K4 DS-7332HQHI-K4 Network Video Recorder User Manual DS-8100HQHI-K8 DS-8124HQHI-K8 DS-8132HQHI-K8 DS-7100HUHI-K1 DS-7104HUHI-K1 DS-7108HUHI-K1 DS-7200HUHI-K1 DS-7204HUHI-K1 DS-7208HUHI-K1 DS-7200HUHI-K1/E DS-7204HUHI-K1/E DS-7208HUHI-K1/E DS-7200HUHI-K2 4 DS-7204HUHI-K2 DS-7208HUHI-K2 DS-7216HUHI-K2 DS-7200HUHI-K/P DS-7204HUHI-K1/P DS-7208HUHI-K2/P DS-7216HUHI-K2/P DS-7300HUHI-K4 DS-7304HUHI-K4 DS-7308HUHI-K4 DS-7316HUHI-K4 DS-7324HUHI-K4 DS-7332HUHI-K4 DS-8100HUHI-K8 DS-8108HUHI-K8 DS-8116HUHI-K8 DS-8124HUHI-K8 DS-8132HUHI-K8 DS-9000HUHI-K8 DS-9008HUHI-K8 DS-9016HUHI-K8 DS-9024HUHI-K8 DS-9032HUHI-K8 DS-7200HTHI-K1 DS-7204HTHI-K1 Network Video Recorder User Manual DS-7200HTHI-K2 DS-7204HTHI-K2 DS-7208HTHI-K2 DS-7300HTHI-K4 DS-7316HTHI-K4 DS-8100HTHI-K8 DS-8116HTHI-K8 DS-9000HTHI-K8 DS-9016HTHI-K8 iDS-7200HQHI-K1/2S iDS-7204HQHI-K1/2S iDS-7200HQHI-K/4S 5 iDS-7208HQHI-K1/4S iDS-7216HQHI-K1/4S iDS-7208HQHI-K2/4S iDS-7216HQHI-K2/4S iDS-7200HQHI-K1/S(B) iDS-7204HQHI-K1/2S(B) iDS-7208HQHI-K1/4S(B) iDS-7216HQHI-K1/4S(B) iDS-7200HQHI-K2/4S(B) iDS-7208HQHI-K2/4S(B) iDS-7216HQHI-K2/4S(B) iDS-7200HUHI-K/4S iDS-7204HUHI-K1/4S iDS-7208HUHI-K1/4S iDS-7204HUHI-K2/4S iDS-7208HUHI-K2/4S iDS-7200HUHI-K/4S(B) iDS-7204HUHI-K1/4S(B) iDS-7208HUHI-K1/4S(B) iDS-7204HUHI-K2/4S(B) iDS-7208HUHI-K2/4S(B) iDS-7300HUHI-K4/16S iDS-7316HUHI-K4/16S iDS-9000HUHI-K8/16S iDS-9016HUHI-K8/16S iDS-7200HQHI-M1/S iDS-7204HQHI-M1/S iDS-7208HQHI-M1/S iDS-7216HQHI-M1/S Network Video Recorder User Manual iDS-7200HQHI-M2/S iDS-7208HQHI-M2/S iDS-7216HQHI-M2/S iDS-7200HUHI-M1/S iDS-7204HUHI-M1/S iDS-7208HUHI-M1/S iDS-7200HUHI-M2/S iDS-7204HUHI-M2/S iDS-7208HUHI-M2/S DS-7316HTI-K4 DS-7316HTI-K4 6 Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Network Video Recorder User Manual 7 Network Video Recorder User Manual Safety Instructions ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information. ● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. ● Do not connect several devices to one power adapter as adapter overload may cause over- heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips: ● Ensure unit is installed in a well-ventilated, dust-free environment. ● Unit is designed for indoor use only. ● Keep all liquids away from the device. ● Ensure environmental conditions meet factory specifications. ● Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit. ● Use the device in conjunction with an UPS if possible. ● Power down the unit before connecting and disconnecting accessories and peripherals. ● A factory recommended HDD should be used for this device. ● Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. ● The USB interface can only connect to mouse, keyboard or USB flash drive. ● Use only power adaptors listed in the user instructions. 8 Network Video Recorder User Manual Product Key Features General ● Connectable to Turbo HD and analog cameras; ● Supports UTC (Coaxitron) protocol for connecting camera over coax; ● Connectable to AHD cameras; ● Connectable to HDCVI cameras; ● Connectable to IP cameras; ● The analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be automatically recognized without configuration; ● -K/P series DVR support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC cameras automatically, manage the power consumption via the coaxial communication, and provide power to the cameras via coaxitron; ● Each channel supports dual-stream. And sub-stream supports up to WD1 resolution; ● HQHI series DVR support up to 4 MP lite resolution of all the channels; ● HTHI, 7208/7216HUHI, 7300HUHI, 8100HUHI, 9000HUHI, iDS-7316HUHI-K4/16S and iDS- 9016HUHI-K8/16S series DVR support up to 8 MP resolution of all the channels; ● 7204HUHI series DVR support up to 5 MP resolution of all the channels; ● For HUHI and HTHI series DVR, 5 MP long distance transmission can be enabled for the analog cameras; ● Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.; ● The minimum frame rate for main stream and sub-stream is 1 fps; ● Encoding for both video stream and video & audio stream; audio and video synchronization during composite stream encoding; ● Supports enabling H.265+/H.264+ to ensure high video quality with lowered bit rate; ● H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 encoding for the main stream, and H.265/H.264 encoding for the sub-stream of analog cameras; ● Connectable to H.265 and H.264 IP cameras; ● For 7208/7216HUHI, 7300HUHI, 8100HUHI, and 9000HUHI series DVR, if the video encoding is H.264 or H.265, when 8 MP signal input is connected, H.264+ or H.265+ is disabled. If the video encoding is H.264+ or H.265+, when 8 MP signal input is connected, the video encoding will change to H.264 or H.265 automatically, and H.264+ or H.265+ is disabled; ● Defog level, night to day sensitivity, day to night sensitivity, IR light brightness, day/night mode, and WDR switch configurable for the connected analog cameras supporting these parameters; ● 4 MP/5 MP signal switch for the supported analog cameras; ● Watermark technology. 9 Network Video Recorder User Manual Local Monitoring ● For DS-7300/8100/9000HUHI-K, DS-7324/7332/8124/8132HQHI-K, DS-7300/8100/9000HTHI- K, iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series, there are two HDMI interfaces of which the HDMI 1 and VGA interfaces share simultaneous output. For HDMI1/VGA output, up to 1920 × 1080 resolution is supported. For HDMI 2 output, up to 4K (3840 × 2160) resolution is supported; ● 1/4/6/8/9/16/25/36/64 screen live view is supported, and the display sequence of screens is adjustable; ● Live view screen can be switched in group and manual switch and automatic cycle live view are also provided, the interval of automatic cycle can be adjusted; ● CVBS output only serves as the aux output or live view output. ● Quick setting menu is provided for live view; ● The selected live view channel can be shielded; ● For HUHI (except iDS-7200HUHI-K/S, iDS-7200HUHI-K/S(B) and iDS-7200HUHI-M/S), HTHI, iDS- 7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series, VCA information overlay in live view for the supported analog cameras and in smart playback for the supported analog and IP cameras; ● Motion detection, video-tampering detection, video exception alarm, video loss alarm and VCA alarm functions; ● For DS-7300/8100/9000HUHI-K and DS-7300/8100/9000HTHI-K series DVR, analog channel supports 1-ch people counting function and heat map function; ● iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR supports false alarm reduction and picture re-recognition for up to 16-ch behavior (line crossing and intrusion) detection; ● iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR supports false alarm reduction and picture re-recognition for human body or vehicle target detection; ● iDS-7200HQHI-K/S, iDS-7200HUHI-K/S, iDS-7200HUHI-K/S(B) and iDS-7200HUHI-M/S series support deep learning-based analysis: re-recognition of the human body or vehicle target in behavior detection to reduce false alarm. Support 2-ch detection for iDS-7204HQHI-K1/2S, 4- ch for iDS-7208HQHI-K1/4S, iDS-7200HQHI-K2/4S, iDS-7200HUHI-K1/4S, iDS-7200HUHI-K2/4S, iDS-7200HUHI-K/S(B) and iDS-7200HUHI-M/S series; ● -K/P series DVR can detect the PoC module exception. When it cannot detect the PoC module or the PoC module is powered off abnormally, alarms are triggered, and linkage methods are configurable; ● HGHI series support only 1-ch line crossing detection and intrusion detection. HTHI series DVR support full-channel line crossing detection and intrusion detection, and 2-ch sudden scene change detection. For HUHI series DVR (except iDS-7200HUHI-K/S, iDS-7200HUHI-K/S(B) and iDS-7200HUHI-M/S series), if enhanced VCA mode is enabled, full-channel line crossing detection and intrusion detection, and 2-ch sudden scene change detection are supported, but 2K/4K output and 4 MP/5 MP/8 MP signal input are not supported; if enhanced VCA mode is disabled, 2-ch line crossing detection and intrusion detection, and 2-ch sudden scene change detection are supported, and 2K/4K output and 4 MP/5 MP/8 MP signal input are also supported. DS-7200HQHI series support up to 4-ch line crossing detection and intrusion 10 detection if enhanced VCA mode is enabled. And DS-7216/7224/7232HQHI series DVR also support 1-ch sudden scene change detection. DS-7300/8100HQHI-K series DVR support up to 4-ch line crossing detection and intrusion detection if enhanced VCA mode is enabled, and 1- ch sudden scene change detection. For HQHI series DVR, the enhanced VCA mode also conflicts with the 2K/4K output and 4 MP/5 MP/8 MP signal input. For the analog channels, the line crossing detection and intrusion detection conflict with other VCA detection such as sudden scene change detection, face detection and vehicle detection. You can only enable one function; ● Privacy mask; ● Zooming in/out by clicking the mouse and PTZ tracing by dragging mouse; ● When Hikvision CVBS camera is connected, you can control PTZ via Coaxitron and call the OSD of the camera. HDD Management ● Each disk with a maximum of 10 TB storage capacity for HTHI, HUHI, HGHI, DS- 7200/7300/8100HQHI, iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR. Each disk with a maximum of 6 TB storage capacity for DS-7100HQHI-K1; ● Up to 8 network disks (8 NAS disks, 8 IP SAN disks or n NAS disks + m IP SAN disks (n+m ≤ 8)) can be connected for HQHI/HUHI/HTHI-K8 series; ● Remaining recording time of the HDD can be viewed; ● Supports cloud storage (except HGHI-K series); ● S.M.A.R.T. and bad sector detection; ● HDD sleeping function; ● HDD property: redundancy, read-only, read/write (R/W); ● HDD group management; ● HDD quota management; different capacity can be assigned to different channels. ● For DS-7300/8100/9000HUHI-K and DS-7300/8100/9000HTHI-K series, hot-swappable HDD supporting RAID0, RAID1, RAID5, RAID 6 and RAID10 storage scheme, and can be enabled and disabled on your demand. And 16 arrays can be configured. Recording, Capture and Playback Capture is supported by DS-7300/8100/9000HUHI-K, DS-7300/8100/9000HTHI-K, iDS- 7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR only. ● Holiday recording schedule configuration; ● Cycle and non-cycle recording modes; ● Normal and event video encoding parameters; ● Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm and event; Network Video Recorder User Manual 11 Network Video Recorder User Manual ● The device will note that the exported AVI video may have problems if the frame rates of the continuous and event recording are different; ● Supports POS triggered recording for DS-7300/8100HQHI, DS-7300/8100/9000HUHI-K, DS- 7300/8100/9000HTHI-K, iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR; ● 8 recording time periods with separated recording types; ● Supports Channel-Zero encoding (except DS-7216HGHI-K1 and DS-7216HGHI-K2); ● Main stream and sub-stream configurable for simultaneous recording (except HGHI-K series); ● Pre-record and post-record for motion detection triggered recording, and pre-record time for schedule and manual recording; ● Searching record files and captured pictures by events (alarm input/motion detection); ● Customization of tags, searching and playing back by tags; ● Locking and unlocking of record files; ● Local redundant recording and capture; ● When Turbo HD, AHD, or HDCVI input is connected, the information including the resolution and frame rate will be overlaid on the bottom right corner of the live view for 5 seconds. When CVBS input is connected, the information such as NTSC or PAL will be overlaid on the bottom right corner of the live view for 5 seconds. ● Searching and playing back record files by camera number, recording type, start time, end time, etc.; ● Smart playback to go through less effective information; ● Zooming in for any area when playback; ● Multi-channel reverse playback; ● Supports pause, fast forward, slow forward, skip forward, and skip backward when playback, locating by dragging the mouse on the progress bar; ● 4/8/16-ch synchronous playback; ● Manual capture, continuous capture of video images and playback of captured pictures. Backup ● Exports data by a USB, and SATA device; ● Exports video clips when playback; ● Video and Log and Player are selectable to export for backup; ● Management and maintenance of backup devices. Alarm and Exception ● Configurable arming time of alarm input/output; ● Alarms for video loss, motion detection, video tampering, illegal login, network disconnected, IP confliction, record/capture exception, HDD error, and HDD full, etc.; ● Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and alarm output; 12 Network Video Recorder User Manual ● One-key disarms the linkage actions of the alarm input; ● PTZ linking for the VCA alarm; ● VCA detection alarm is supported except DS-7100 series; ● Support 1-ch facial detection and capture (HD analog camera) for iDS-7200HQHI-K/S(B), iDS- 7200HQHI-M/S, iDS-7200HUHI-K/4S(B) and iDS-7200HUHI-M/S series; ● Supports POS triggered alarm; ● Supports coaxial alarm; ● System will automatically reboot when a problem is detected in an attempt to restore normal functionality; ● You can enable false alarm filer for the motion detection of the PIR cameras. Then only when the motion detection events and PIR events are both triggered, the motion detection alarm will be triggered. Other Local Functions ● Operable by mouse and remote control; ● Three-level user management; admin user can create many operating account and define their operating permission, which includes the permission to access any channel; ● Completeness of operation, alarm, exceptions and log writing and searching; ● Manually triggering and clearing alarms; ● Importing and exporting of configuration file of devices; ● Getting cameras type information automatically; ● Unlock pattern for device login for the admin; ● Clear-text password available; ● GUID file can be exported for password resetting; ● Security question and reserved email can be configured for password resetting; ● Multiple connected analog cameras supporting Turbo HD or AHD signal can be upgraded simultaneously via DVR. Network Functions ● Self-adaptive 100M or 1000M network interface; ● IPv6 is supported; ● TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SNMP (for 7304/7308/7316HQHI/HUHI and 9008/9016HUHI and DS-7300/8100/9000HTHI-K series DVR), SMTP, NFS, iSCSI, UPnPTM and HTTPS are supported; ● Supports access by Hik-Connect. If you enable Hik-Connect, the device will remind you the internet access risk and ask you to confirm the “Terms of Service” and “Privacy Statement” before enabling the service. You should create a verification code to connect to the Hik- Connect; ● TCP, UDP and RTP for unicast; 13 Network Video Recorder User Manual ● Auto/Manual port mapping by UPnPTM; ● Remote search, playback, download, locking and unlocking the record files, and downloading files broken transfer resume; ● Remote parameters setup; remote import/export of device parameters; ● Remote viewing of the device status, system logs and alarm status; ● Remote keyboard operation; ● Remote HDD formatting and program upgrading; ● Remote system restart and shutdown; ● Supports upgrading via remote FTP server; ● RS-485 transparent channel transmission; ● Alarm and exception information can be sent to the remote host; ● Remotely start/stop recording; ● Remotely start/stop alarm output; ● Remote PTZ control; ● Two-way audio and voice broadcasting; ● Output bandwidth limit configurable; ● Embedded WEB server; ● If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server and Alternate DNS Server. Development Scalability ● SDK for Windows and Linux system; ● Source code of application software for demo; ● Development support and training for application system. 14 Network Video Recorder User Manual TABLE OF CONTENTS Product Key Features ................................................................................................................... 9 Chapter 1 Introduction .............................................................................................................. 23 Front Panel .................................................................................................................. 23 DS-7100HQHI-K1 ................................................................................................. 23 DS-7300HQHI-K4, DS-7300HUHI-K4, iDS-7316HUHI-K4/16S, DS-7300HTHI-K4, and DS-7316HTI-K4.................................................................................................................23 DS-8100HQHI/HUHI/HTHI-K8, DS-9000HUHI/HTHI-K8 and iDS-9016HUHI-K8/16S ..........................................................................................................................................27 Other Models ...................................................................................................... 31 IR Remote Control Operations ..................................................................................... 32 Pairing (Enabling) the IR Remote to a Specific Device (optional) .......................... 32 Unpair (Disable) an IR Remote from a Device ...................................................... 33 Troubleshooting .................................................................................................. 36 USB Mouse Operation ................................................................................................. 37 Rear Panel ................................................................................................................... 38 DS-7100HQHI-K1, DS-7200HUHI-K (/P), iDS-7200HUHI-K/4S, DS-7200HTHI-K, DS- 7200HQHI-K(/P), and iDS-7200HQHI-K/S ...................................................................... 38 iDS-7200HQHI-K/S(B) and iDS-7200HQHI-M/S..................................................... 40 DS-7100HUHI-K1 ................................................................................................. 42 iDS-7200HUHI-K/4S(B) and iDS-7200HUHI-M2/S ................................................. 43 DS-7200HQHI-K1/E and DS-7200HUHI-K1/E ........................................................ 44 DS-7300HQHI-K ................................................................................................... 45 DS-7300HUHI/HTHI-K4, iDS-7316HUHI-K4/16S and DS-9000HUHI-K8 ................. 47 DS-7300HQHI/HUHI-K4, DS-8100HQHI/HUHI-K8, DS-9000HUHI-K8, and iDS- 9016HUHI-K8/16S ........................................................................................................ 49 DS-7200HGHI-K1 ................................................................................................. 51 DS-7200HGHI-K2 ............................................................................................... 52 DS-8100HTHI-K8 ................................................................................................ 53 DS-9000HTHI-K8 ................................................................................................ 54 Chapter 2 Getting Started .......................................................................................................... 56 Start up the Device ...................................................................................................... 56 Activate the Device ...................................................................................................... 56 Configure Unlock Pattern for Login............................................................................... 58 Login to the Device ...................................................................................................... 59 15 Reboot the Device ................................................................................................... 65 Chapter 3 Camera Management ................................................................................................... 67 Upgrade the IP Camera .................................................................................................... 71 Chapter 4 Camera Settings ............................................................................................................ 73 Configure Other Camera Parameters ............................................................................... 76 Chapter 5 Live View ....................................................................................................................... 77 Using an Auxiliary Monitor............................................................................................... 82 Chapter 6 PTZ Control ................................................................................................................... 83 Enter Wizard to Configure Quick Basic Settings ............................................................... 60 Enter Main Menu ............................................................................................................. 64 System Operation ............................................................................................................. 65 Add the IP Cameras .......................................................................................................... 67 Enable the H.265 Stream Access ...................................................................................... 71 Configure OSD Settings ................................................................................................... 73 Configure Privacy Mask .................................................................................................... 74 Configure the Video Parameters ...................................................................................... 75 Configure the Day/Night Switch ....................................................................................... 75 Start Live View .................................................................................................................. 77 Target Detection ............................................................................................................... 78 Configure Live View Settings ............................................................................................ 79 Configure Live View Layout .............................................................................................. 79 Configure Auto-Switch of Cameras .................................................................................. 81 Configure Channel-zero Encoding .................................................................................... 81 PTZ Control Wizard ........................................................................................................... 83 Network Video Recorder User Manual Log in via Unlock Pattern......................................................................................... 59 Log in via Password ................................................................................................. 60 Log out..................................................................................................................... 65 Shut Down the Device ............................................................................................. 65 Add the IP Camera Manually .................................................................................. 67 Add the Automatically Searched Online IP Cameras .............................................. 68 Connecting PoC Cameras ........................................................................................ 68 Configure Signal Input Channel ............................................................................... 69 Configuring 5 MP Long Distance Transmission ....................................................... 70 Digital Zoom ............................................................................................................ 77 Live View Strategy ................................................................................................... 78 16 Auxiliary Functions ........................................................................................................... 91 Chapter 7 Storage ............................................................................................................................ 92 Configure PTZ Parameters ................................................................................................ 83 Set PTZ Presets, Patrols & Patterns .................................................................................. 84 Storage Device Management ........................................................................................... 92 Storage Mode ................................................................................................................... 95 Recording Parameters ...................................................................................................... 98 Configure Recording Schedule ....................................................................................... 101 Configure Continuous Recording ................................................................................... 102 Configure Motion Detection Triggered Recording ......................................................... 102 Configure Event Triggered Recording ............................................................................. 103 Configure Alarm Triggered Recording ............................................................................ 103 Configure Picture Capture .............................................................................................. 104 Network Video Recorder User Manual Set a Preset ............................................................................................................. 84 Call a Preset ............................................................................................................. 85 Set a Patrol .............................................................................................................. 86 Call a Patrol ............................................................................................................. 87 Set a Pattern ............................................................................................................ 88 Call a Pattern ........................................................................................................... 89 Set Linear Scan Limits .............................................................................................. 89 Call Linear Scan ....................................................................................................... 90 One-touch Park ....................................................................................................... 90 Install the HDD ........................................................................................................ 92 Add the Network Disk ............................................................................................. 92 Configure eSATA for Data Storage ........................................................................... 94 Configure HDD Group ............................................................................................. 95 Configure HDD Quota.............................................................................................. 97 Main Stream ............................................................................................................ 98 Sub-Stream .............................................................................................................. 99 Picture ..................................................................................................................... 99 Configure Advanced Recording Settings ............................................................... 100 Configure Holiday Recording and Capture ................................................................... 105 Configure Redundant Recording and Capture ............................................................. 106 Configure 1080p Lite .................................................................................................... 107 Enable the 1080P Lite Mode ............................................................................... 107 Disable the 1080P Lite Mode .............................................................................. 108 17 Chapter 8 Disk Array .................................................................................................................... 109 Check and Edit Firmware ............................................................................................... 115 Chapter 9 File Management ........................................................................................................ 116 Call Search History................................................................................................. 119 Chapter 10 Playback ..................................................................................................................... 120 Create Disk Array ............................................................................................................ 109 Rebuild Array .................................................................................................................. 112 Delete Array ................................................................................................................... 114 Search and Export All Files ............................................................................................. 116 Search and Export Human Files ..................................................................................... 117 Search and Export Vehicle Files...................................................................................... 118 Search History Operation ............................................................................................... 119 Network Video Recorder User Manual Enable RAID ........................................................................................................... 109 One-Touch Creation .............................................................................................. 110 Manual Creation .................................................................................................... 110 Configure Hot Spare Disk ...................................................................................... 112 Automatically Rebuild Array.................................................................................. 112 Manually Rebuild Array ......................................................................................... 113 Search Files ............................................................................................................ 116 Export Files ............................................................................................................ 116 Search Human Files ............................................................................................... 117 Export Human Files ............................................................................................... 117 Search Vehicle Files ............................................................................................... 118 Export Vehicle Files ............................................................................................... 118 Save Search Condition ........................................................................................... 119 Play Video Files ............................................................................................................. 120 Instant Playback .................................................................................................. 120 Play Normal Video ............................................................................................... 120 Play Smart Searched Video ................................................................................. 121 Play Custom Searched Files ................................................................................. 122 Play Tag Files ....................................................................................................... 123 Play Event Files .................................................................................................... 125 Play by Sub-periods ............................................................................................. 126 Play Log Files ....................................................................................................... 127 Play External File ................................................................................................. 127 18 Digital Zoom ........................................................................................................ 130 Chapter 11 Event and Alarm Settings ........................................................................................ 131 Trigger or Clear Alarm Output Manually ...................................................................... 142 Chapter 12 POS Configuration .................................................................................................... 144 Configure POS Alarm .................................................................................................... 149 Chapter 13 VCA Event Alarm ..................................................................................................... 151 Network Video Recorder User Manual Playback Operations ..................................................................................................... 128 Set Play Strategy in Smart/Custom Mode ........................................................... 128 Edit Video Clips.................................................................................................... 129 Switch between Main Stream and Sub-Stream .................................................. 129 Thumbnails View ................................................................................................. 129 Fast View ............................................................................................................. 130 Configure Arming Schedule.......................................................................................... 131 Configure Alarm Linkage Actions ................................................................................. 131 Configure Auto-switch Full Screen Monitoring ................................................... 131 Configure Audio Warning .................................................................................... 132 Notify Surveillance Center .................................................................................. 132 Configure Email Linkage ...................................................................................... 133 Trigger Alarm Output .......................................................................................... 133 Configure PTZ Linkage ......................................................................................... 133 Configure Motion Detection Alarm.............................................................................. 134 Configure Video Loss Alarm ......................................................................................... 136 Configure Video Tampering Alarm ............................................................................... 137 Configure Sensor Alarms .............................................................................................. 138 Configure Alarm Input ......................................................................................... 138 Configure One-Key Disarming ............................................................................. 139 Configure Alarm Output ...................................................................................... 140 Configure Exceptions Alarm ......................................................................................... 141 Configure POS Settings ................................................................................................. 144 Configure POS Connection .................................................................................. 144 Configure POS Text Overlay ................................................................................. 148 Human Body Detection ................................................................................................ 151 Face Detection.............................................................................................................. 152 Vehicle Detection ......................................................................................................... 153 Line Crossing Detection ................................................................................................ 154 19 PIR Alarm .................................................................................................................... 165 Chapter 14 Smart Analysis .......................................................................................................... 167 Heat Map ...................................................................................................................... 173 Chapter 15 Human Body Detection ........................................................................................... 175 Add Search Result as Sample Picture .................................................................. 177 Chapter 16 Network Settings ...................................................................................................... 178 Configure Ports ............................................................................................................. 184 Chapter 17 System Maintenance ................................................................................................. 186 Network Video Recorder User Manual Intrusion Detection ...................................................................................................... 156 Region Entrance Detection .......................................................................................... 157 Region Exiting Detection .............................................................................................. 158 Unattended Baggage Detection ................................................................................... 160 Object Removal Detection ........................................................................................... 161 Audio Exception Detection ......................................................................................... 162 Sudden Scene Change Detection ............................................................................... 163 Defocus Detection ...................................................................................................... 164 Engine Configuration .................................................................................................... 167 Task Configuration ........................................................................................................ 168 Face Search................................................................................................................... 170 Human Body Search ..................................................................................................... 171 Vehicle Search .............................................................................................................. 172 People Counting ........................................................................................................... 172 Enable Human Body Smart Analysis ............................................................................ 175 Human Body Search ..................................................................................................... 175 Search by Appearance ......................................................................................... 175 Search by Picture ................................................................................................. 177 Configure TCP/IP Settings ............................................................................................. 178 Configure Hik-Connect ................................................................................................. 179 Configure DDNS ............................................................................................................ 180 Configure PPPoE ........................................................................................................... 181 Configure NTP .............................................................................................................. 181 Configure SNMP ........................................................................................................... 182 Configure Email ............................................................................................................ 183 Storage Device Maintenance ....................................................................................... 186 Configure Disk Clone ........................................................................................... 186 20 Managing IP Camera Activation .......................................................................... 199 Chapter 18 General System Settings........................................................................................... 201 Network Video Recorder User Manual S.M.A.R.T Detection ............................................................................................ 187 Bad Sector Detection .......................................................................................... 188 HDD Health Detection ......................................................................................... 189 Search & Export Log Files ............................................................................................. 190 Search the Log Files ............................................................................................. 190 Export the Log Files ............................................................................................. 191 Import/Export IP Camera Configuration Files .............................................................. 192 Import/Export Device Configuration Files ................................................................... 193 Upgrade System ........................................................................................................... 194 Upgrade by Local Backup Device ........................................................................ 194 Upgrade by FTP ................................................................................................... 194 Upgrade by Hik-Connect ..................................................................................... 195 Upgrade Camera .......................................................................................................... 195 Restore Default Settings ............................................................................................... 196 System Service.............................................................................................................. 197 Network Security Settings ................................................................................... 197 Managing ONVIF User Accounts ......................................................................... 198 Configure General Settings .......................................................................................... 201 Configure Date & Time ................................................................................................. 202 Configure DST Settings ................................................................................................. 203 Configure Enhanced IP Mode ...................................................................................... 203 Manage User Accounts ................................................................................................ 203 Add a User ........................................................................................................... 204 Set Permission for a User .................................................................................... 205 Set Local Live View Permission for Non-Admin Users ........................................ 207 Edit the Admin User ............................................................................................ 208 Edit the Operator/Guest User ............................................................................. 210 Delete a User ....................................................................................................... 210 Configure Password Security ........................................................................................ 211 Export GUID File .................................................................................................. 211 Configure Security Questions .............................................................................. 211 Configure Reserved Email ................................................................................... 212 Reset Password ............................................................................................................ 213 Reset Password by GUID ..................................................................................... 213 21 Reset Password by Reserved Email ..................................................................... 215 Chapter 19 Appendix ................................................................................................................... 217 List of Applicable Power Adapter .................................................................................. 217 Network Video Recorder User Manual Reset Password by Security Questions ............................................................... 214 22 Chapter 1 Introduction Front Panel DS-7100HQHI-K1 Front Panel Table 1-1 Front Panel Description No. Icon Description 1 Turns red when DVR is powered up. 2 Turns red when data is being read from or written to HDD. 3 Flickers blue when network connection is functioning properly. DS-7300HQHI-K4, DS-7300HUHI-K4, DS-7300HTHI-K4, iDS-7316HUHI-K4/16S, and DS-7316HTI-K4 Front Panel Network Video Recorder User Manual 23 Network Video Recorder User Manual Table 1-2 Front Panel Description No. Name Function Description POWER Turns green when DVR is powered up. READY Turns properly. green, indicating that the DVR is functioning STATUS 1 24 Turns green when device is controlled by an IR remote. Turns red when controlled by a keyboard and purple when IR remote and keyboard is used at the same time. ALARM Turns red when a sensor alarm is detected. HDD Flickers to HDD. in red when data is being read from or written Tx/Rx Flickers functioning in properly. green when network connection is 2 DVD-R/W Slot for DVD-R/W. 3 Composite Keys Switches between the numeric or letter input and SHIFT functions of the composite keys. (Input letter or numbers when the light is out; Realize functions when the light is red.) 1/MENU Enters numeral “1”; Accesses the main menu interface. 2/ABC/F1 Enters numeral “2”; Enters letters “ABC”; The F1 button when used in a list field will select all items in the list; Turns on/off PTZ light in PTZ Control mode, and use it to zoom out the image; Network Video Recorder User Manual No. Name Function Description Switches between main and spot video output in live view or playback mode. 3/DEF/F2 25 Enters numeral “3”; Enters letters “DEF”; Uses the F2 button is used to change the tab pages; Zooms in the image in PTZ control mode. 4/GHI/ESC Enters numeral “4”; Enters letters “GHI”; Exits and back to the previous menu. 5/JKL/EDIT Enters numeral “5”; Enters letters “JKL”; Deletes characters before cursor; Check the checkbox and select the ON/OFF switch; Starts/stops record clipping in playback. 6/MNO/PLAY Enters numeral “6”; Enters letters “MNO”; Accesses to playback interface in Playback mode. 7/PQRS/REC Enters numeral “7”; Enters letters “PQRS”; Accesses to manual record interface; Manually enables/disables record. Network Video Recorder User Manual No. Name Function Description Enters numeral “8”; 8/TUV/PTZ Enters letters “TUV”; Accesses PTZ control interface. 9/WXYZ/PREV 26 Enters numeral “9”; Enters letters “WXYZ”; Multi-channel display in live view. 0/A Enters numeral “0”; Shifts the input methods in the editing text field. (Upper and lowercase, alphabet, symbols or numeric input). 4 Navigates between different fields and items in menus. Uses the Up and Down buttons to speed up and slow down the playing of video files in Playback mode. DIRECTION The Left and Right button will select the next and previous record files. Cycles through channels in Live View mode. Controls the movement of the PTZ camera in PTZ control mode. ENTER Confirms selection in any of the menu modes. Checks the checkbox. Plays or pauses the playing of video files in Playback mode. Advances the video by a single frame in single-frame Playback mode. DS-8100HQHI/HUHI/HTHI-K8, DS-9000HUHI/HTHI-K8 and iDS-9016HUHI-K8/16S No. Name Function Description Stops/starts auto switch in Auto-switch mode. 5 POWER Power on/off switch. 6 JOG SHUTTLE Control Moves the active selection up and down in a menu. Cycles through different channels in live view mode. Jumps 30s forward/backward in video files in the playback mode. Controls the movement of the PTZ camera in PTZ control mode. Moves the active selection up and down in a menu. 7 USB Interface Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD). 8 IR Receiver Receiver for IR remote control. Network Video Recorder User Manual Front Panel of DS-8100HQHI/HUHI/HTHI-K8 27 Front Panel of DS-9000HUHI/HTHI-K8 and iDS-9016HUHI-K8/16S Table 1-3 Front Panel Description No. Name Function Description 1 ALARM Turns red when a sensor alarm is detected. READY Turns blue, indicating that the DVR is functioning properly. STATUS Turns blue when device is controlled by an IR remote. Turns red when controlled by a keyboard and purple when IR remote and keyboard is used at the same time. HDD Flickers in red when data is being read from or written to HDD. MODEM Flickers in blue when network connection is functioning properly. Tx/Rx Turns blue when the device is in armed status; at this time, an alarm is enabled when an event is detected. GUARD Turns off when the device is unarmed. The arm/disarm status can be changed by pressing and holding on the ESC button for more than 3 seconds in live view mode. Turns red when a sensor alarm is detected. 2 IR Receiver Receiver for IR remote 3 Front Panel Lock Lock or unlock the panel by the key. 4 DVD-R/W Slot for DVD-R/W. 5 Alphanumeric Buttons Switches to the corresponding channel in live view or PTZ control mode. Network Video Recorder User Manual 28 Network Video Recorder User Manual Inputs numbers and characters in edit mode. Switches between different channels in playback mode. Turns blue when the corresponding channel is recording; turns red when the channel is in network transmission status; turns pink when the channel is recording and transmitting. 6 USB Interfaces Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD). Returns to the previous menu. ESC Presses for arming/disarming the device in live view mode. REC/SHOT 7 29 Enters the Manual Record settings menu. Presses this button followed by a numeric button to call a PTZ preset in PTZ control settings. Turns audio on/off in the playback mode. PLAY/AUTO Enters the playback mode. Automatically scans in the PTZ control menu. ZOOM+ Zooms in the PTZ camera in the PTZ control setting. A/FOCUS+ Adjusts focus in the PTZ Control menu. Switches between input methods (upper and lower case alphabet, symbols and numeric input). EDIT/IRIS+ Edits text fields. When editing text fields, it also deletes the character in front of the cursor. Checks the checkbox in the checkbox fields. Adjusts the iris of the camera in PTZ control mode. Generates video clips for backup in playback mode. Enters/exits the folder of USB device and eSATA HDD. Network Video Recorder User Manual Switches between main and spot output. MAIN/SPOT/ZOOM- Zooms out the image in PTZ control mode. Selects all items on the list when used in a list field. F1/ LIGHT Turns on/off PTZ light (if applicable) in PTZ control mode. Switches between play and reverse play in playback mode. F2/ AUX 30 Cycles through tab pages. Switches between channels in synchronous playback mode. MENU/WIPER Returns to the Main menu (after successful login). Presses and holds the button for five seconds to turn off audible key beep. Starts wiper (if applicable) in PTZ control mode. Shows/hides the control interface in playback mode. PREV/FOCUS- Switches between single screen and multi-screen mode. Adjusts the focus in conjunction with the A/FOCUS+ button in PTZ control mode. PTZ/IRIS- Enters the PTZ Control mode. Adjusts the iris of the PTZ camera in PTZ control mode. 8 DIRECTION Navigates between different fields and items in menus. Uses the Up and Down buttons to speed up and slow down the playing of video files in Playback mode. The Left and Right button will select the next and previous record files. Cycles through channels in Live View mode. Controls the movement of the PTZ camera in PTZ control mode.

Confirms selection in any of the menu modes. Checks the checkbox. ENTER Plays or pauses the playing of video files in Playback mode. Advances the video by a single frame in single-frame Playback mode. Stops/starts auto switch in Auto-switch mode. 9 JOG SHUTTLE Control Cycles through different channels in live view mode. Jumps 30s forward/backward in video files in the playback mode.

Moves the active selection up and down in a menu. Controls the movement of the PTZ camera in PTZ control mode. 10 POWER ON/OFF Power on/off switch. Other Models Network Video Recorder User Manual 31 Front Panel of Other Models IR Remote Control Operations The device may also be controlled with the included IR remote control, shown in Figure 1-6. Batteries (2×AAA) must be installed before operation. The IR remote is set at the factory to control the device (using default Device ID# 255) without any additional steps. Device ID# 255 is the default universal device identification number shared by the devices. You may also pair an IR Remote to a specific device by changing the Device ID#, as follows: Pairing (Enabling) the IR Remote to a Specific Device (optional) You can pair an IR Remote to a specific device by creating a user-defined Device ID#. This feature is useful when using multiple IR Remotes and devices. On the device: Type a number (255 digits maximum) into Device No. On the IR Remote: Network Video Recorder User Manual Table 1-4 Front Panel Description No. Icon Description 1 Turns white when DVR is powered up. 2 Turns red when data is being read from or written to HDD. 3 Flashes white when the network is well-connected. 4 Receiver for IR remote control. 5 USB Interface Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD). Go to System > General. Press DEV. Use the Number buttons to enter the Device ID# that was entered into the device. Press Enter to accept the new Device ID#. 32 Unpair (Disable) an IR Remote from a Device To unpair an IR Remote from a device so that the unit cannot control any device functions, proceed as follows: Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit’s memory and it will no longer function with the device. (Re)-enabling the IR Remote requires pairing to a device. See “Pairing the IR Remote to a Specific device (optional),” above. The keys on the remote control closely resemble the ones on the front panel. See the table 1.4. Network Video Recorder User Manual 33 IR Remote Functions Remote Control Network Video Recorder User Manual No. Name Function Description

1 POWER ON/OFF 34 •To Turn Device Off: -If User Is Logged On: 1.Hold Power On/Off button (1) down for five seconds to display the “Yes/No” verification prompt. 2.Use Up/Down Arrow buttons (12) to highlight desired selection. 3.Press Enter button (12) to accept selection. -If User Is Not Logged On: 1.Hold Power On/Off button (1) down for five seconds to display the user name/password prompt. 2.Press the Enter button (12) to display the on-screen keyboard. 3.Input the user name. 4.Press the Enter button (12) to accept input and dismiss the on- screen keyboard. 5.Use the Down Arrow button (12) to move to the “Password” field. 6.Input password (use on-screen keyboard or numeric buttons (3) for numbers). 7.Press the Enter button (12) to accept input and dismiss the on- screen keyboard. 8.Press the OK button on the screen to accept input and display the Yes/No” verification prompt (use Up/Down Arrow buttons (12) to move between fields) 9.Press Enter button (12) to accept selection.

•To Turn Power On: -If User Has Not Changed the Default device ID# (255): 1.Press Power On/Off button (1). -If User Has Changed the device ID#: 1.Press DEV button. 2.Press Number buttons to enter user-defined Device ID#. 3.Press Enter button. 4.Press Power button to start device. User name/password prompt depends on device is configuration. See “System Configuration” section. Network Video Recorder User Manual Enable IR Remote: Press DEV button, enter device ID# with number keys, press Enter to pair unit with the device 2 DEV Disable IR Remote: Press DEV button to clear Device ID#; unit will no longer be paired with the device Switch to the corresponding channel in Live View or PTZ Control 3 Numerals mode Input numbers in Edit mode 4 EDIT Delete characters before cursor Check the checkbox and select the ON/OFF switch 5 A 35 Adjust focus in the PTZ Control menu Switch on-screen keyboards (upper and lower case alphabet, symbols, and numerals) 6 REC Enter Manual Record setting menu Call a PTZ preset by using the numeric buttons in PTZ control settings Turn audio on/off in Playback mode Go to Playback mode 7 PLAY Auto scan in the PTZ Control menu 8 INFO Reserved 9 VOIP Switches between main and spot output Zooms out the image in PTZ control mode 10 MENU Return to Main menu (after successful login) N/A Show/hide full screen in Playback mode 12 DIRECTION Navigate between fields and menu items Use Up/Down buttons to speed up/slow down recorded video, and Left/Right buttons to advance/rewind 30 secs in Playback mode Cycle through channels in Live View mode Control PTZ camera movement in PTZ control mode ENTER Confirm selection in any menu mode Make sure you have installed batteries properly in the remote control. And you have to aim the remote control at the IR receiver in the front panel. If there is no response after you press any button on the remote, follow the procedure below to troubleshoot. Press ENTER on the remote. If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator does not turn blue and there is still no response from the remote, please check the following: ● Batteries are installed correctly and the polarities of the batteries are not reversed. Check and remember device ID#. The default ID# is 255. This ID# is valid for all the IR remote controls. Network Video Recorder User Manual Checks checkbox Play or pause video in Playback mode Advance video a single frame in single-frame Playback mode Stop/start auto switch in auto-switch mode 13 PTZ Enter PTZ Control mode 14 ESC Go back to previous screen N/A 15 RESERVED Reserved 16 F1 Troubleshooting Go to System > General by operating the front control panel or the mouse. Press DEV on the remote control. Enter the device ID# you set in step 2. 36 Select all items on a list N/A Switch between play and reverse play in Playback mode 17 PTZ Control Adjust PTZ camera iris, focus, and zoom 18 F2 Cycle through tab pages Switch between channels in Synchronous Playback mode ● Batteries are fresh and not out of charge. ● IR receiver is not obstructed. ● No fluorescent lamp is used nearby If the remote still can’t function properly, please change a remote and try again, or contact the device provider. USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse: The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible reason may be that the two devices are not compatible, please refer to the recommended the device list from your provider. The operation of the mouse: Network Video Recorder User Manual Plug USB mouse into one of the USB interfaces on the front panel of the device. Description of the Mouse Control Name Action Description Left-Click 37 Single-Click ● Live view: Select channel and show the quick set menu. ● Menu: Select and enter. Double-Click Live view: Switch between single-screen and multi- screen. Click and Drag ● PTZ control: pan, tilt and zoom. ● Video tampering, privacy mask and motion detection: Select target area. ● Digital zoom-in: Drag and select target area. ● Live view: Drag channel/time bar. Right-Click Single-Click ● Live view: Show menu. ● Menu: Exit current menu to upper level menu. Scroll-Wheel Scrolling up ● Live view: Previous screen. ● Menu: Previous item. Scrolling down ● Live view: Next screen. ● Menu: Next item. DS-7100HQHI-K1, DS-7200HUHI-K (/P), iDS-7200HUHI- K/4S, DS-7200HTHI-K, DS-7200HQHI-K(/P), and iDS-7200HQHI- K/S The rear panel varies according to different models. Please refer to the actual product. The following figures are for reference only. Rear Panel Network Video Recorder User Manual Rear Panel of DS-7200HUHI-K and iDS-7200HUHI-K/4S 38 Rear Panel of DS-7200HUHI-K/P Rear Panel of DS-7100HQHI-K1 Rear panels of these series DVR with 4 or 8 video inputs are similar to the figure above. Rear Panel of DS-7200HQHI-K (with 16 Video Inputs) and iDS-7200HQHI-K/S Network Video Recorder User Manual 39 Rear Panel of DS-7200HQHI-K (with 32 Video Inputs) Rear Panel of DS-7200HQHI-K/P Rear Panel of DS-7200HTHI-K1 Rear Panel of DS-7200HTHI-K2 Network Video Recorder User Manual Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 AUDIO IN RCA connector 3 AUDIO OUT RCA connector. 4 VGA DB15 connector for VGA output. Display local video output and menu. 5 HDMI HDMI video output connector. 6 USB Interface Universal Serial Bus (USB) port for additional devices. 7 Network Interface Connector for network 8 RS-485 Interface Connector for RS-485 devices. 9 Power Supply 48 VDC or 12 VDC. 10 Power Switch Switch for turning on/off the device. 11 GND Ground 12 VIDEO OUT BNC connector for video output. 13 Alarm In/Out Connector for alarm input and output. iDS-7200HQHI-K/S(B) and iDS-7200HQHI-M/S Rear Panel of iDS-7200HQHI-K1/S(B) and iDS-7200HQHI-M1/S (with 16 Video Inputs) 40 Network Video Recorder User Manual Rear Panel of iDS-7200HQHI-K2/S(B) and iDS-7200HQHI-M2/S (with 16 Video Inputs) Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 USB Interface Universal Serial Bus (USB) port for additional devices. 3 VIDEO OUT BNC connector for video output. 4 HDMI HDMI video output connector. 5 VGA DB15 connector for VGA output. Display local video output and menu. 6 AUDIO OUT RCA connector. 7 AUDIO IN RCA connector 8 Network Interface Connector for network. 9 RS-485 Interface Connector for RS-485 devices. 10 Power Supply 12 VDC power supply. 11 GND Ground. 41 DS-7100HUHI-K1 Rear Panel of DS-7100HUHI-K1 No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 VGA DB15 connector for VGA output. Display local video output and menu. 3 HDMI HDMI video output connector. 4 AUDIO IN RCA connector 5 AUDIO OUT RCA connector. 6 USB Interface Universal Serial Bus (USB) port for additional devices. 7 Network Interface Connector for network. 8 GND Ground. 9 Power Supply 12 VDC power supply. Network Video Recorder User Manual 42 iDS-7200HUHI-K/4S(B) and iDS-7200HUHI-M2/S Network Video Recorder User Manual Rear Panel of iDS-7200HUHI-K1/4S(B) Rear Panel of iDS-7200HUHI-K2/4S(B) Rear Panel of iDS-7200HUHI-M1/S Rear Panel of iDS-7200HUHI-M2/S 43 DS-7200HQHI-K1/E and DS-7200HUHI-K1/E Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 USB Interface Universal Serial Bus (USB) port for additional devices. 3 VIDEO OUT BNC connector for video output. 4 HDMI HDMI video output connector. 5 VGA DB15 connector for VGA output. Display local video output and menu. 6 AUDIO OUT RCA connector. 7 AUDIO IN RCA connector 8 Network Interface Connector for network. 9 RS-485 Interface Connector for RS-485 devices. 10 Power Supply 12 VDC power supply. 11 GND Ground. 12 ALARM IN/OUT Connector for alarm input/output. Network Video Recorder User Manual 44 Rear Panel of DS-7200HQHI-K1/E DS-7300HQHI-K Rear Panel of DS-7200HUHI-K1/E No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 HDMI HDMI video output connector. 3 VGA DB15 connector for VGA output. Display local video output and menu. 4 AUDIO OUT RCA connector. 5 AUDIO IN RCA connector. 6 USB Interface Universal Serial Bus (USB) port for additional devices. 7 Network Interface Connector for network. 8 Power Supply 12 VDC power supply. 9 GND Ground. Network Video Recorder User Manual Rear Panel of DS-7300HQHI-K (with 16 Video Inputs) 45 Network Video Recorder User Manual Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 VIDEO OUT BNC connector for video output. 3 AUDIO IN RCA connector 4 USB Port Universal Serial Bus (USB) port for additional devices. 5 HDMI HDMI video output connector. 6 VGA DB15 connector for VGA output. Display local video output and menu. 7 AUDIO OUT RCA connector. 8 Network Interface Connector for network 9 RS-485 and Alarm Interface 46 Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Connector for alarm input. Connector for alarm output. 10 Power Supply 100 to 240 VAC power supply. 11 Power Switch Switch for turning on/off the device. 12 GND Ground 13 LINE IN BNC connector for audio input. 14 eSATA Connects external SATA HDD, CD/DVD-RW. No. Item Description 15 RS-232 Interface Connector for RS-232 devices. DS-7300HUHI/HTHI-K4, iDS-7316HUHI-K4/16S and DS- 9000HUHI-K8 Rear Panel of DS-7300HUHI/HTHI-K4, iDS-7316HUHI-K4/16S, and DS-7316HTI-K4 Rear Panel of DS-9000HUHI-K8 (with 8 Video Inputs) Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 VIDEO OUT BNC connector for video output. 3 AUDIO IN/LOOP OUT (for DS- 9000HUHI- K8) RCA connector 4 USB Port Universal Serial Bus (USB) port for additional devices. 5 HDMI1/VGA Simultaneous HDMI1/VGA output. Display local video output and menu. 6 HDMI2 HDMI2 video output connector. Network Video Recorder User Manual 47 Network Video Recorder User Manual No. Item Description 7 AUDIO OUT RCA connector. 8 Network Interface Connector for network 9 RS-485 and Alarm Interface 48 Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Connector for alarm input. Connector for alarm output. 10 Power Supply 100 to 240 VAC power supply. 11 Power Switch Switch for turning on/off the device. 12 GND Ground 13 LINE IN BNC connector for audio input. 14 eSATA Connects external SATA HDD, CD/DVD-RW. 15 RS-232 Interface Connector for RS-232 devices. 16 ALARM OUT Connector for alarm output. 17 AUDIO IN (for DS- 9000HUHI-K8) RCA connector DS-7300HQHI/HUHI-K4, DS-8100HQHI/HUHI-K8, DS- 9000HUHI-K8, and iDS-9016HUHI-K8/16S Network Video Recorder User Manual Rear Panel of DS-7300HQHI-K4 (with 32-ch Video Inputs) Rear Panel of DS-7300HUHI-K4 (with 32-ch Video Inputs) Rear Panel of DS-8100HQHI/HUHI-K8 (with 32-ch Video Inputs) Rear Panel of DS-9000HUHI-K8 (with 32-ch Video Inputs) 49 Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 AUDIO IN RCA connector. 3 LINE IN BNC connector for audio input. 4 AUDIO OUT RCA connector. 5 VIDEO OUT BNC connector for video output. 6 RS-485 and Alarm Interface Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Connector for alarm input. Connector for alarm output. 7 RS-232 Interface Connector for RS-232 devices. 8 VGA Interface VGA video output connector. Display local video output and menu. 9 eSATA Connects external SATA HDD, CD/DVD-RW. 10 HDMI1 Interface HDMI1 video output connector. Display local video output and menu. 72 34 9 1 13 5 10 11 812 6 14 Network Video Recorder User Manual 50 Rear Panel of iDS-9016HUHI-K8/16S 1516 No. Item Description 11 HDMI2 Interface HDMI2 video output connector. 12 Network Interface Connector for network. 13 USB Interface Universal Serial Bus (USB) port for additional devices. 14 GND Ground 15 Power Supply 100 to 240 VAC power supply. 16 Power Switch Switch for turning on/off the device. 17 AUDIO IN DB26 female head Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 HDMI Interface HDMI video output connector. 3 VGA Interface VGA video output connector. Display local video output and menu. 4 AUDIO OUT RCA connector. 5 AUDIO IN RCA connector. 6 Network Interface Connector for network. DS-7200HGHI-K1 Network Video Recorder User Manual 51 Rear Panel of DS-7200HGHI-K1 Network Video Recorder User Manual No. Item Description 7 USB Interface Universal Serial Bus (USB) port for additional devices. 8 Power Supply 12 VDC power supply. 9 GND Ground DS-7200HGHI-K2 Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 2 USB Interface Universal Serial Bus (USB) port for additional devices. 3 VIDEO OUT BNC connector for video output. 4 AUDIO OUT RCA connector. 5 AUDIO IN RCA connector. 6 HDMI Interface HDMI video output connector. 7 Network Interface Connector for network. 8 VGA Interface VGA video output connector. Display local video output and menu. 9 RS-485 Interface 52 D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Rear Panel of DS-7200HGHI-K2 Network Video Recorder User Manual DS-8100HTHI-K8 Rear Panel Description No. Item Description 1 AUDIO IN RCA connector. 2 VIDEO IN BNC interface for Turbo HD and analog video input. 3 AUDIO OUT RCA connector. 4 USB Interface Universal Serial Bus (USB) port for additional devices. 5 VIDEO OUT BNC connector for video output. 6 LINE IN BNC connector for audio input. HDMI1, HDMI2 7 and VGA Interface 53 No. Item Description 10 Power Supply 12 VDC power supply. 11 Power Switch Switch for turning on/off the device. 12 GND Ground HDMI1, HDMI2 and VGA video output connector. 8 RS-232 Interface Connector for RS-232 devices. Rear Panel of DS-8100HTHI-K8 Network Video Recorder User Manual No. Item Description 9 Network Interface Connector for network. 10 RS-485 and Alarm Interface DS-9000HTHI-K8 Rear Panel Description No. Item Description 1 VIDEO IN BNC interface for Turbo HD and analog video input. 54 Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Connector for alarm input. Connector for alarm output. 11 eSATA Connects external SATA HDD, CD/DVD-RW. 12 GND Ground 13 Power Supply 100 to 240 VAC power supply. 14 Power Switch Switch for turning on/off the device. Rear Panel of DS-9000HTHI-K8 Network Video Recorder User Manual No. Item Description 2 VIDEO OUT BNC connector for video output. 3 LOOP OUT RCA connector 4 USB Interface Universal Serial Bus (USB) port for additional devices. 5 HDMI1 Interface 55 and VGA HDMI1 and VGA video output interface. 6 HDMI2 Interface HDMI2 video output interface. 7 AUDIO OUT RCA connector. 8 Network Interface Connector for network. 9 RS-485 and Alarm Interface Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR. Connector for alarm input. Connector for alarm output. 10 Power Supply 100 to 240 VAC power supply. 11 Power Switch Switch for turning on/off the device. 12 GND Ground 13 LINE IN BNC connector for audio input. 14 eSATA Connects external SATA HDD, CD/DVD-RW. 15 RS-232 Interface Connector for RS-232 devices. 16 ALARM OUT Connector for alarm output (optional). 17 AUDIO IN Audio in interface. Start up the Device Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the device. Before you start: Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground connection is working properly. Activate the Device Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via Web Browser, SADP, or Client Software. Connect the device power supply interface and electrical socket with delivered power cable. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power button on the front panel should be red, indicating the device is receiving the power. Network Video Recorder User Manual Chapter 2 Getting Started Enter the admin password twice. 56 Set Admin Password We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Click OK. What to do next:

● When you have enabled Export GUID, continue to export the GUID file to the USB flash drive for the future password resetting. ● Set Security Questions When you have enabled Security Question Configuration, continue to set the security questions for the future password resetting.

● When you have enabled Reserved E-mail Settings, continue to set the reserved email for the future password resetting. Optionally, check Export GUID, Security Question Configuration, or Reserved E-mail Settings for password resetting in the future. Enter the password to activate the IP camera(s) connected to the device. Network Video Recorder User Manual 57 Configure Unlock Pattern for Login Purpose: For the admin user, you can configure the unlock pattern for device login. After the device is activated, you can enter the following interface to configure the device unlock pattern. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done. ● After the device is activated, you should properly keep the password. ● You can duplicate the password to the IP cameras that are connected with default protocol. Network Video Recorder User Manual 58 Set the Reserved Email Draw the Pattern Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully. ● Connect at least 4 dots to draw the pattern. ● Each dot can be connected for once only. ● Only the admin user has the permission to unlock the device. ● Please configure the pattern first before unlocking. Please refer to 2.2 Activate the Device. Network Video Recorder User Manual Login to the Device Log in via Unlock Pattern Right click the mouse on the screen and select the menu to enter the interface. Draw the pre-defined pattern to unlock to enter the menu operation. 59 Draw the Unlock Pattern Log in via Password Purpose: If device has logged out, you must login the device before operating the menu and other functions. Enter Wizard to Configure Quick Basic Settings Purpose: By default, the Setup Wizard starts once the device has loaded. The Setup Wizard can walk you through some important settings of the device. If you don’t want to use the Setup Wizard at that moment, click the Exit button. ● If you have forgotten your pattern, you can select the Forgot My Pattern or Switch User option to enter the normal login dialog box. ● When the pattern you draw is different from the pattern you have configured, you should try again. ● If you have drawn the wrong pattern for more than 5 times, the system will switch to the normal login mode automatically. ● When you forget the password of the admin, you can click Forgot Password to reset the password. ● In the Login dialog box, if you enter the wrong password 7 times, the current user account will be locked for 60 seconds. Select the User Name in the dropdown list. Input password. Click OK to log in. Network Video Recorder User Manual 60 Login Interface After the time settings, click Next to enter the Network Setup Wizard window, as shown in the following figure. Click Next after you configured the network parameters, which takes you to the HDD Management window. Network Video Recorder User Manual Configure the date and time on the Date and Time Setup interface. 61 Date and Time Settings Network Settings To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD. If the camera is in inactive status, you can select the camera from the list and click Activate to activate the cameras. Network Video Recorder User Manual Click Next. You enter the Camera Setup interface to add the IP cameras. 1) Click Search to search the online IP Camera. Before adding the camera, make sure the IP camera to be added is in active status. 2) Click the Add to add the camera. Enter the Platform Access and configure the Hik-Connect settings. 62 Search for IP Cameras HDD Management Click Next to enter the Change Password interface to create the new admin password if required. You can enter click the to show the characters input. 1) Check the checkbox of New Admin Password. 2) Enter the original password in the text field of Admin Password 3) Input the same password in the text field of New Password and Confirm. 4) Check the Unlock Pattern to enable the unlock pattern login. Network Video Recorder User Manual 63 Hik-Connect Access Change Password We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Enter Main Menu Purpose: After you have completed the wizard, you can right click on the screen to enter the main menu bar. Refer to the following figure and table for the description of main menu and sub-menus. Click OK to complete the startup Setup Wizard. Description of Icons Icon Description Live View Playback File Management Smart Analysis Camera Management Storage Management Network Video Recorder User Manual 64 Main Menu Bar Log out Purpose: After logging out, the monitor turns to the live view mode and if you want to perform any operations, you need to enter user name and password to log in again. Reboot the Device Purpose: From the Shutdown menu, you can also reboot the device. After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password to unlock the system. Do not conduct power off operation again when the system is shutting down. System Operation Shut Down the Device Click on the menu bar. Click Logout. Click on the menu bar. Click the Shutdown. Click the Yes. Click on the menu bar. Network Video Recorder User Manual System Management System Maintenance: 65 Network Video Recorder User Manual Click Reboot to reboot the device. 66 Add the IP Camera Manually Purpose: Before you can get live video or record the video files, you should add the network cameras to the connection list of the device. Before you start: Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Click Camera > IP Camera > Custom Add on the title bar or click in the idle channel window to enter the Add IP Camera interface. Enter IP address, protocol, management port, and other information of the IP camera to add. Add the IP Cameras Click on the main menu bar. Enter the login user name and password of the IP camera. Chapter 3 Camera Management Network Video Recorder User Manual 67 Add IP Camera Connecting PoC Cameras Before you start ● Ensure your device supports PoC (Power over Coaxitron) cameras connection. ● Connect the PoC camera to the DVR. Purpose The device will detect the connected PoC cameras automatically, manage the power consumption via the coaxial communication, and provide power to the cameras via coaxitron. Step 1 Go to Menu > Camera > PoC Status. Step 2 Turn on the PoC for the channel(s) as your desire. Step 3 Check the status of connected PoC camera. On the IP Camera interface, click the Number of Unadded Online Device to expand the panel. ● If the IP camera to add has not been activated, you can activate it from the IP camera list on the camera management interface. ● For iDS-7200HQHI-K/S and iDS-7200HUHI-K/S series, when IP camera is added, the device will automatically switch the resolution to WD1/D1 and switch the bit rate to 512 Kbps. Add the Automatically Searched Online IP Cameras Click Add to finish the adding of the IP camera. (Optional) Click Continue to Add to continue to add other IP cameras. Select the automatically searched online devices. Click Add. Network Video Recorder User Manual 68 Add IP Camera ● If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera is connected, there is no video and “Insufficient Power for PoC” is overlaid on the live view image. ● If the power consumption of the DVR is higher than that of the AF camera and lower than that of the AT camera, when AF camera is connected, it is powered on normally; when AT camera is connected, it is powered on and then powered off, and there is no video and “Insufficient Power for PoC” is overlaid on the live view image. ● If the power consumption of the DVR is higher than that of the AT camera, when AF or AT camera is connected, it is powered on normally. Step 4 Check the connected AF or AT camera number and the connectable camera number. Please turn off the PoC function if the camera does not support PoC, or the camera is not produced by Hikvision. Otherwise, it may result in permanent damage to the camera or DVR. Configure Signal Input Channel Purpose You can configure the analog and IP signal input types. ● Only Hikvision PoC camera is supported. ● The maximum connectable AT/AF camera number varies with different models. Network Video Recorder User Manual 69 PoC Status This chapter is only applicable to HUHI and HTHI series DVR. Purpose For HUHI and HTHI series DVR, you can configure 5 MP long distance transmission on the Signal Input Status interface. You can view the max. accessible number of IP cameras in the Max. IP Camera Number text field. Refer to the specifications for the max. accessible IP camera number of different models. Click on the main menu bar. Click Camera > Analog. Check the checkbox to select different signal input types: HD/CVBS and IP. If you select HD/CVBS, four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be connected randomly for the selected channel. If you select IP, IP camera can be connected for the selected channel. Click Apply to save the settings. Configuring 5 MP Long Distance Transmission Click on the main menu bar. Click Camera > Analog. Network Video Recorder User Manual 70 Signal Input Status Enable the H.265 Stream Access Purpose: The device can automatically switch to the H.265 stream of IP camera (which supports H.265 video format) for the initial access. Upgrade the IP Camera Purpose: The IP camera can be remotely upgraded through the device. Click Camera > IP Camera > More Settings > H.265 Auto Switch Configuration at the top taskbar. Plug the U-flash drive with the IP camera’s firmware upgrade file to the device. Click to enter the 5 MP Long Distance Transmission Settings interface. Select channel(s) to enable 5 MP Long Distance Transmission. Click OK. Click Apply to save the settings. Click on the main menu bar. Check Enable H.265 (For Initial Access). Click OK. Network Video Recorder User Manual 5 MP Long Distance Transmission Settings 71 Click Upgrade. Result: The IP camera will reboot automatically after the upgrading completes. Click on the main menu bar. On the camera management interface, select a camera. Click Camera > IP Camera > More Settings > Upgrade at the top taskbar. Select the firmware upgrade file from the U-flash drive. Network Video Recorder User Manual 72 Configure OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date/time, camera name, etc. Check the checkbox of the Display Name, Display Date and Display Week if you want to show the information on the image. You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position. Click on the main menu bar. Click Display. Select the camera from the drop-down list. Edit the name in the Camera Name text field. Set the date format, time format, and display mode. Network Video Recorder User Manual Chapter 4 Camera Settings 73 OSD Configuration Interface Configure Privacy Mask Purpose: The privacy mask can be used to protect personal privacy by concealing parts of the image from view or recording with a masked area. Up to 4 privacy masks zones can be configured and the size of each area can be adjusted. Related Operation: Use the mouse to draw a zone on the window. The zones will be marked with different frame colors. Click the Apply button to apply the settings. Click on the main menu bar. Click Privacy Mask. Select the camera to set privacy mask. Click the checkbox of Enable to enable this feature. Network Video Recorder User Manual 74 Privacy Mask Settings Interface The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear Zone1-4 icons on the right side of the window, or click Clear All to clear all zones. Configure the Day/Night Switch Purpose: The camera can be set to day, night or auto switch mode according to the surrounding illumination conditions. Configure the Video Parameters Purpose: You can customize the image parameters including the brightness, contrast, saturation for the live view and recording effect. Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or saturation. Select Day/Night Switch to Day, Night, Auto or Auto-Switch. Auto: The camera switches between the day mode and the night mode according to the illumination automatically. The sensitivity ranges from 0 to 7, and the higher sensitivity results in the more easily to trigger the mode switch. The switch time refers to the interval time between the day/night switch. You can set it from 5 sec to 120 sec. Auto-Switch: The camera switches the day mode and the night mode according to the start time and end time you set. Click Apply to save the settings. Click on the main menu bar. Click Display. Select the camera from the drop-down list. Click Apply to save the settings. Click on the main menu bar. Click Display. Select the camera from the drop-down list. Network Video Recorder User Manual 75 Configure Other Camera Parameters Purpose: For the connected camera, you can configure the camera parameters including the exposure mode, backlight and image enhancement. Configure the camera parameters. ● Exposure: Set the exposure time (1/10000 to 1 sec) of camera. The larger exposure value results in the brighter image. ● Backlight: Set the wide dynamic range (0 to 100) of the camera. When the surrounding illumination and the object have larger difference in brightness, you should set the WDR value. ● Image Enhancement: For optimized image contrast enhancement. Click the Apply to save the settings. Click on the main menu bar. Click Display. Select the camera from the drop-down list. Click the Apply to save the settings. Network Video Recorder User Manual 76 Start Live View Click on the main menu bar to enter the live view. ● You can select a window and double click a camera from the list to play the video from the camera in the selected window. ● Use the toolbar at the playing window bottom to realize the capture, instant playback, audio on/off, digital zoom, live view strategy, show information and start/stop recording, etc. Digital Zoom Purpose: Digital Zoom is for zooming in the live image. You can zoom in the image to different proportions (1 to 16X). Chapter 5 Live View Live view shows you the video image getting from each camera in real time. In the live view mode, click from the toolbar to enter the digital zoom interface. You can move the sliding bar or scroll the mouse wheel to zoom in/out the image to different proportions (1 to 16X). Network Video Recorder User Manual 77 Digital Zoom Target Detection Purpose: In live view mode, the target detection function can be used to detect the human motion/face/vehicle/human body during the last 5 seconds and the following 10 seconds. In the live view mode, click to enter the digital zoom operation interface in full screen mode. In the live view mode, click Target Detection tab to enter the target detection interface. Check the checkbox of the icons to select different detection types: motion detection ( ), vehicle detection ( ), face detection ( ) and human body detection ( ). You can select the historical analysis ( ) or the real-time analysis ( ) to obtain the results. Target Detection Result: The smart analysis results of the detection are displayed in the list. Optionally, click a result in list to play the related video. Network Video Recorder User Manual Live View Strategy Select the live view strategy to Real-time, Balanced or Fluency. 78 Configure Live View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Configure the live view parameters. ● Video Output Interface: Select the video output to configure. ● Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc. ● Dwell Time: The time in seconds to dwell between switching of cameras when enabling auto- switch in Live View. ● Enable Audio Output: Enable/disable audio output for the selected video output. ● Volume: Adjust the volume of live view, playback and two-way audio for the selected output interface. ● Event Output: Select the output to show event video. ● Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen. Configure Live View Layout Network Video Recorder User Manual Go to System > Live View > General. Click OK to save the settings. Go to System> Live View>View. 79 Live View-General


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply