Free English HARMAN JBL QUANTUM 300 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HARMAN JBL QUANTUM 300 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the box with the HARMAN JBL QUANTUM 300?
The box contains the following items:
1. HARMAN JBL QUANTUM 300 headset
2. USB audio adapter
3. Windshield foam for boom microphone
4. QSG, Warranty Card, and Warning Card
What are the software requirements for the HARMAN JBL QUANTUM 300?
The software requirements for the JBL QuantumENGINE are:
Platform: Windows 7 or higher
500MB of free hard drive space for installation
Note: QuantumSURROUND / QuantumSPHERE 360 and DTS Headphone:X V2.0 are available on Windows only. Software installation is required.
What systems are compatible with the HARMAN JBL QUANTUM 300?
The headset is compatible with the following platforms:
PC
Xbox
PlayStation
Nintendo Switch
Mobile
MAC
VR
What are the main controls and features located on the HARMAN JBL QUANTUM 300 headset?
The headset features the following controls and components:
01. Volume Control
02. Detachable Windshield foam
03. Voice Focus Boom Microphone
04. Flat-fold ear cup
How do I connect the HARMAN JBL QUANTUM 300 to my devices?
For PC and MAC: Connect the headset 3.5mm jack into the USB audio adapter, and plug the USB adapter into the computer.
For Xbox, PlayStation, Nintendo Switch, Mobile, MAC, and VR: Connect the headset directly to the device using the 3.5mm audio jack.
How do I configure the sound settings for the HARMAN JBL QUANTUM 300 on Windows for the first time?
Follow these steps for first-time setup:
5A. Go to Sound Settings.
5B. Under “Playback” highlight HARMAN JBL QUANTUM 300 and select “Set Default”.
5C. Under “Recording” highlight HARMAN JBL QUANTUM 300 and select “Set Default”.
5D. In your chat application select HARMAN JBL QUANTUM 300 as the default audio device.
How do I mute and unmute the microphone on the HARMAN JBL QUANTUM 300?
To mute the microphone, flip the microphone boom upwards. To unmute the microphone, flip the microphone boom downwards.
What are the technical specifications of the HARMAN JBL QUANTUM 300?
| Driver size | 50 mm Dynamic drivers |
| Frequency response | 20 Hz – 20 kHz |
| Max input power | 30 mW |
| Sensitivity | 100 dB SPL @1 kHz / 1 mW |
| Impedance | 32 ohm |
| Microphone frequency response | 100 Hz – 10 KHz |
| Microphone sensitivity | -40 dBV @1 kHz / Pa |
| Microphone pickup pattern | Directional |
| Microphone size | 4 mm x 1.5 mm |
| Cable length | Headset (1.2 m) + USB audio adapter (1.5 m) |
| Weight | 245 g |
CLICK HERE TO DOWNLOAD HARMAN JBL QUANTUM 300 (02) PDF DOCUMENT