Free English HAMPTON BAY WSLBIRCH6FTX39 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HAMPTON BAY WSLBIRCH6FTX39 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What must be done to the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop surface before installation?
TO AVOID CRACKING AND SPLITING OF WOOD BUTCHER BLOCK SURFACE MUST BE SEALED OR FINISHED WITHIN 48 HOURS.
What finishing options are available for the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop pre-installation?
The available finishing options include Butcher Block Conditioner, Mineral Oil, or Polyurethane.
Why is protecting the underside and all edges of the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop important?
Protecting the underside and all edges is as important as protecting the top.
What is important to consider regarding the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop during installation planning?
The countertop expands and contracts depending on the microclimatic conditions of the room. Provide expansion gaps between the edges of the countertop and wall, which allows for this wood movement.
How should the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop be mounted?
Mount the countertop to the cabinet frame or drill overized holes in your support blocks.
What is Method 1 for joining countertops when installing the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop?
Method 1: When using miter bolts to join tops, use two or three clamps at each joint, depending on the width.
What is Method 2 for joining countertops when installing the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop?
Method 2: Using multiple biscuit or mortise/tenon joints with pocket screws on the underside is another joint method.
What steps are necessary for cutting the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop to size?
Use a circular saw with a fine tooth blade with removeable tape (1) on the cut line to minimize chipping. Clamp a straight edge (2) to the top as a guide for your circular saw to achieve a straight cut, especially when two cut edges will be joined together to avoid any gaps.
When should the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop be oiled or treated with oil-wax after initial finishing?
Oil the countertop every three (3) to six (6) months to restore coating and each time when the surface begins to tarnish or drops of spilled water lose their natural shape and penetrate into the wood.
Under what conditions should the finishing of the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop with oil or oil-wax be considered sufficient?
Protective coating is sufficient when water remains on the countertop after a spill, without tendency to spread and penetrate the wood.
What are low-maintenance finishing options allowed for the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop?
Other finishing methods are allowed that provide equal protection against moisture such as polyurethane. Please see finish manufacturer’s instructions for finish application.
What should be done immediately after a spill on the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop?
Remove any spills from the surface. Do not allow the water to lie on the surface for a long time.
What precautions should be taken when placing hot dishes on the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop?
Always use protective mats or pads under hot dishes, or leave them to cool on the stove.
How should the HAMPTON BAY WSLBIRCH6FTX39 Solid Wood Countertop be cleaned?
Use a soft cloth and warm water when cleaning. Never use concentrated cleaning detergents, especially those containing bleach.
CLICK HERE TO DOWNLOAD HAMPTON BAY WSLBIRCH6FTX39 (01) PDF DOCUMENT