GVM GVM-RGB20W (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD GVM GVM-RGB20W (01) PDF MANUAL


PDF Content Summary: SIMPIE FAULTS PRODUCT DISCLAIMERS PRODUCT PARAMETER PRODUCT INSTALLATION Install it on the camera as shown below. 4There are two power supply modes to choose. DESCRIPTION OF FUNCTION INSTRUCTION & temperature adjustment → rotate the compound knob to adjust the APP CONTROL AND If you have forgotten your login password,

AND TROUBLESHOOTING CONTENTS INTRODUCTION 1. Welcome to "GVM-RGB20W". This product is specially designed for senior Before using this product, please read the instructions carefully and make sure use the product correctly. If you don’t obey the instructions and warnings, you Brand : GVM STRUCTURE ANALYSIS2METHOD 1The steps of hot shoe bracket installation are shown in the ① Connect the adapter for power supply. ② Insert a suitable lithium battery and use a battery power supply. PRODUCT CONTROL KEYS INSTRUCTION FOR USE ① Mode selection: color temperature.(Press the return button to return to the previous menu) The color temperature can be adjusted by APPwhen connected to APP. APP ON-LINE CONTROL Scan the QR code on the back of the manual to download the APP enter the email address of the user who registered for the APPon the login interface

Phenomenon Check the productTroubleshooting Product introduction -------------------------------------------Page 1 photography enthusiasts. The product is suitable for live / outdoor / studio photography, and also for YouTube video shooting. The main features of maybe cause harm to yourself and the people around, or even damage the product and other things around. 2.Once you use this product, you are deemed to have read the disclaimer and warning Product Name : Photography lights Product Type : Photography Fill Light Cooling Hot shoe interface OLED display figure below. 3 Rotate the compound knob to select the mode, and lightly press the compound knob to enter the mode. ④ Adjust HUE: range 0° ~ 360° Rotate the compound knob to select HSI mode → press the compound Turn on the video light, open the "GVM LED" APPapplication on your phone ( phone needs to turn on Bluetooth), after registering the APP and click "Reset Password" at the bottom right to reset the login password.

① The switch Check the matching power adapter indicator light up Make sure the adapter is well contacted with the power plug. the product are: Disclaimers --------------------------------------------------------Page 2 carefully, understand and acknowledge all the terms and contents of this statement, and promise to take full responsibility for the use of this product and possible Product model : GVM-RGB20W hole Battery Compound DC IN 4 DCIN Modes include : CCT, HSI, SCENE 1 CCT : Adjust the brightness and color temperature through the compound knob to enter HSI mode → Rotate the compound knob to select hue adjustment → press the compound knob to enter hue adjustment → account and log in, you will enter the Bluetooth search interface →

indicator does not light up The product is in ② or not. When using lithium battery, make sure there's no "low power" protection. Charge the battery before using it. Precautions -------------------------------------------------------Page 2 Product parameter ---------------------------------------------Page 3 Product structure analysis ------------------------------------Page 4 ①② Step-less adjustable RGB color and dual color temperature feature, color range 2700K ~ 10000k, with 162 LED bulbs, which is helpful to restore and enrich the color of objects and provide you with natural and vivid shooting effect. App intelligent control system, which can be controlled by your intelligent consequences. Product material : Plastic Lamp beads quantity : 162 Color rendering index : ≥97 Color temperature : 2700K~10000K Hue : RGB 0°~360° Installation Slot Bracket interface knob buttons Adapter interface 2 5 knob or APP. HSI : Adjust the brightness, hue and color purity through the compound knob or APP. SCENE : There are 8 scenes:Lightning, Cop Car, Candle, TV, Bad Bulb, Party, Disco, Paparazzi , Use the compound knob to select the Rotate the compound knob to adjust the hue. (Press the return button to return to the previous menu) The HUE can be adjusted by APP when connected to APP. ⑤ Adjust color purity(SAT): range 0%~100% findtheBluetoothnamed"BT_LED"andconnect→waitfor connection → successful connection Then automatically enter the APPcontrol interface. At this time, you can control the brightness, color temperature, hue, color purity, scene light, period and on / off of the connected video light through the APP. USE AND PRESERVATION

the "ON" state, the display and lights are not on Check if the product is “OFF” because of the APP of the mobile phone. Press the “ON/OFF” button once again. Installation method ---------------------------------------- Page 5,6,7 mobile device. ③ With OLED screen display and stable system. Supports 180 ° rotation, PRECAUTIONS SAT : 0%~100% Brightness : 3500lux/0.5m, 1100lux/1m ON/OFF Return button Adapter Interface scene and adjust the brightness, color temperature, time and other parameters. Rotate the compound knob to select the HSI mode → press the compound knob to enter the HSI mode → rotate the compound knob to select the SATadjustment → press the compound knob to enter Do not put the product in a highly humid, strong electromagnetic field, direct sunlight, high-temperature environment. If not use the product for a long time, disconnect the power and take out the battery.

Description of product control keys ----------------------- Page 8 which can effectively control the light, allows you to easily shoot the ①Please use the matching power adapter or lithium battery with the same Light adjustment method : Step-less adjustment GVM-RGB20W 3 Loosen the angle locking knob of the hot shoe bracket, adjust it the SATadjustment → Rotate the compound knob to adjust the Clean: Clean:Before clean, disconnect the power plug. And use wet cloth rather than any

Normal steps: desired results at will. specification to power the product. Do not use power adapter with Function / Feature : High color rendering index light beads, APPcontrol, to the proper angle, and tighten the knob. ② Adjust brightness (BRG): range 0%~100% color purity. (Press the return button to return to the previous menu) detergent or soluble liquid, avoiding damaging the surface layer.

APP can't connect / can't Check whether the phone is turned on Bluetooth and the ① Turn on the lights and turn on the phone's Bluetooth Function introduction and instruction for use ------- Page 9,10 APP connection and APP control --------------------- Page 11,12 ④ The product can simulate 8 kinds of scene lights: Lightning, Police car, Candlelight, TV, Bad light bulb, Party, disco, Paparazzi. different output voltage parameters. portable, Scene light, RGB light Power : 20W Light interface 1 DC power input interface Any mode has brightness adjustment. Rotate the compound knob to select the desired mode → press the compound knob to enter the TheSAT can be adjusted by APP when connected to APP. Power: Power:Make sure the power is in the demanded range, not too high or too low. Correctly load the battery, in order not the damage to machine.

control Bluetoothconnection is successful. ②Open APP, connect We believe that once using our product correctly, you can make huge progress ② The product is not waterproof, please use it in rainproof environment. Voltage : DC 9V 2 Power switch: Long press to turn on mode → rotate the compound knob to select brightness adjustment ⑥ Adjust the scene mode(SCENCE): Repairing:If there is fault or performance degradation, do not unpack the shell by Repairing:

The light cannot adjust RGB color Check whether the color purity SATvalue is too low or 0; the color purity value is 100, the color difference is most obvious. Bluetooth BT_ LED Increase the SAT value in HSI mode GVM Official websiteFacebookDownload APP Web: gvmled.com B&H Email: bh@gvmled.com Simple faults and troubleshooting ------------------------ Page 12 Use and preservation ----------------------------------------- Page 13 when shooting. Before using the product, you are strongly recommended to read the instructions below carefully. ③ ④ ⑤ The product is not anti corrosion, therefore do not let the product touch any corrosive liquid. When using the product, make sure the product is put firmly and prevent from falling and damage. If the product will not be used for a long time, please switch off the power to reduce energy loss. Power supply mode : DC input&Battery Power supply : DC 9V/3A Battery Capacity : NPseries battery Product Weight : 0.4KG Product Size ( mm ) : 242×106×30 Cooling : Natural heat dissipation Hot shoe lock knob Angle fixing knob Battery Installation Slot 34 OLED display: It can display mode, brightness, color temperature, hue, color purity, scene, period, etc. Compound knob buttons: Press the button to enter the sub-menu and parameter adjustment; rotate up and down to select the menu and adjust the light parameters. → lightly press the compound knob to enter brightness adjustment → rotate the compound knob to adjust the brightness. (Press the return button to return to the previous menu) The brightness can be adjusted by APP when connected to APP. ③ Adjust color temperature (CCT): range 2700K~10000K Rotate the compound knob to select CCTmode → press the compound Rotate the compound knob to select SCENE mode → press the compound knob to enter SCENE mode → rotate the compound knob to select the desired scene light → press the compound knob to enter the menu of this scene light → rotate the compound knob to select the item to be adjusted → press the compound knob to enter this item → rotate The compound knob can adjust the parameters of this item. (Press the return button to return to the previous menu) yourself, avoiding damage the machine and lose the right of maintenance. When there is a fault, do not hesitate to contact us, and we will do our best to deal with the problem. Accessories:Please use the accessories provided by manufacturer and approved Accessories: ones, in order to maximize the performance. Guarantee:Do does not modify the product, or you will lose the right of maintenance. Guarantee:

GVM Email: support@gvmled.com AmazonEmail: gvmledservice@hotmail.com amazonsupport@gvmled.com GVM-RGB20W Hot shoe Commodity origin : Huizhou. China Hot Shoe Bracket 5return button: Press to return to the previous menu and exit the parameter adjustment. knob to enter CCTmode → Rotate the compound knob to select color temperature adjustment → press the compound knob to enter color Connect the APP, set scene light mode through the APP.

1312 15 2 4 6 7 8910

3 11


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply