Free English GROSSAG WK 30.07 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GROSSAG WK 30.07 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety precautions should be taken regarding the electrical connection of the GROSSAG WK 30.07?
Connect the appliance to alternating current only with a rated voltage according to the rating plate to a correctly installed earthed socket.
Ensure the cord and plug are completely dry.
Do not pull the plug by the cord or touch it with wet hands.
If the connection cord is damaged, it must be replaced by an authorized service agent or qualified person.
Can I use an external timer or remote control with the GROSSAG WK 30.07?
No, the appliance must not be operated by means of an external timer or remote control switch.
Where should I place the GROSSAG WK 30.07 base for operation?
Place the base on a flat, stable, heat, and water-resistant surface.
Do not place the kettle onto hot surfaces such as hot plates or near gas flames, as it may melt.
Do not place the kettle onto water damageable surfaces.
How should I fill the GROSSAG WK 30.07 with water?
Remove the kettle from the base for filling.
Only fill the kettle with pure water, not with milk, coffee, or other liquids.
Always fill it with water up to the “MIN” marking to prevent it from boiling dry.
Fill the kettle with water up to the maximum marking (MAX) situated inside the kettle.
How do I operate the GROSSAG WK 30.07 to boil water?
Close the lid until it snaps hearable. The boil stop automatic only works with a closed lid.
Put the kettle on the base.
Press the switch to position I (ON). The control lamp indicates that the appliance is heating.
Keep the lid closed during the boiling process.
The appliance switches off automatically with a “click” as the water boils and the control lamp goes off.
What should I do before using the GROSSAG WK 30.07 for the first time?
Remove all packaging material.
Clean the inside of the kettle carefully by opening the lid using the button at the handle.
Rinse the kettle with water several times.
The water of the first boiling process should not be used for food preparation.
How does the automatic boil stop feature work on the GROSSAG WK 30.07?
Shortly after the water has started boiling, the automatic boil stop switches off the appliance and the control lamp.
If only warm water is desired, the boiling process can be stopped at any time by pressing the switch.
What is the safety system regarding overheating for the GROSSAG WK 30.07?
If the water kettle is switched on without water by mistake, a thermostat protects the kettle from overheating by switching it off.
To switch it on again, the kettle has to be taken off the base to reset the thermostat.
Before refilling the kettle, it must be cooled down for 5 to 10 minutes.
How do I clean and maintain the GROSSAG WK 30.07?
Pull the plug and wait until the kettle is cooled down.
Never immerse the kettle or the base into water.
Do not use caustic or scouring cleaning agents.
Clean the inside of the kettle occasionally with fresh water.
Clean the outside of the kettle with a damp cloth only.
Clean the scale filter regularly by taking it out of the spout and gently cleaning it with a soft brush under a running tap.
How do I remove residues from the stainless steel bottom of the GROSSAG WK 30.07?
The inside of the pot bottom is made from rust-resistant stainless steel. Any iron moulds are only residues which stick on the surface.
They should be removed with a special cleansing agent for stainless steel.
How often should I descale the GROSSAG WK 30.07?
The appliance should be descaled after each one to three months, depending on the frequency of use and the lime content of the used water.
Descaling needs to be done on a regular basis to guarantee optimal boiling results and reduce energy loss.
Signs of scale include lengthening of the boiling time and increased noise during use.
What is the procedure for descaling the GROSSAG WK 30.07?
Use an appropriate descaling agent suitable for stainless steel and consider the user instructions on the package of the descaler.
The scale filter can be taken out and descaled separately.
Never allow the substance to boil, otherwise, it will foam over the top of the kettle.
After descaling, rinse the kettle thoroughly with water several times.
Can children use the GROSSAG WK 30.07?
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children must not play with the appliance.
Cleaning and user maintenance must not be made by children unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of children less than 8 years.
In which situations should I immediately stop using or unplug the GROSSAG WK 30.07?
If the kettle or cord is damaged.
If the appliance leaks.
If any defect after a plunge or something similar is suspected.
In case of faults during use.
Before cleaning and maintenance.
After use.
Is the GROSSAG WK 30.07 suitable for commercial use?
No, the appliance is not intended for commercial or industrial use.
It is intended for household use only and may only be used indoors.
It is not intended for use in environments such as staff kitchens, farms, hotels, motels, bed and breakfasts, or other residential environments.
Can I open the lid of the GROSSAG WK 30.07 while pouring water?
No, do not open the lid while pouring out water.
Do not open the lid of the kettle during use; only open the lid after the kettle is empty and all water has been poured out.
CLICK HERE TO DOWNLOAD GROSSAG WK 30.07 (01) PDF DOCUMENT