Free English GRIZZLY G4833 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GRIZZLY G4833 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the installation procedure for the top bag on my GRIZZLY G4833 dust collector?
Warning: To avoid injury, always remove the plug from the outlet before changing the bag filter.
1. Remove the old filter and clean the sealing surface.
2. Attach the loop on the closed end of the bag to the unit to prevent the bag from collapsing when not in use.
3. Carefully slide the open end of the bag over the unit.
4. Clamp the bag to the unit with the enclosed clamp. Inspect the seal for leaks.
5. If tightening the clamp does not stop dust from leaking, we recommend applying a layer of adhesive-backed foam weather stripping just below the rolled lip on the collector body. It may be helpful to seal the bottom bag in this manner as well.
How do I clean my GRIZZLY G4833 dust collector?
1. When the dust collector is off, tap the outside of the top filter bag with your hands to remove internal dust build-up.
2. Empty the bottom bag when it is three-quarters of the way full.
Important: Avoid cleaning internal filter media with abrasive materials or using a brush. This will permanently damage the filter, causing dust to bypass the filter.
CLICK HERE TO DOWNLOAD GRIZZLY G4833 (01) PDF DOCUMENT