FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF USER GUIDE
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF USER MANUAL
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF OWNER GUIDE
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF OWNER MANUAL
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF REFERENCE GUIDE
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF INSTRUCTION GUIDE
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF REFERENCE MANUAL
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF INSTRUCTION MANUAL
FREE ENGLISH GRANBERG BASELIFT CORNER 6302H (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD GRANBERG BASELIFT CORNER 6302H (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
GRANBERG BASELIFT CORNER 6302H (01) PDF SUMMARY:
What is essential for the product to work safely and securely?
It is extremely essential that the installation instructions be followed.
What should the installer do before beginning the installation?
The installer should read and understand all the installation instructions before installation begins.
Who is responsible for floor and wall structures meeting the set requirements?
The installer is responsible for floor and wall structures meeting the set requirements.
Who is responsible for ensuring that fasteners can withstand the forces that may occur?
The installer is responsible for ensuring that fasteners can withstand the forces that may occur.
Who is responsible for the right authority and skills being available for electric and water works?
The installer is also responsible for the right authority and skills being available for electric and water works.
What should be done after the installation is complete?
After completed installation, the product shall be functionally tested according to sections on p. 33.
What should be checked before installation?
Check floor stability before installation.
What is the maximum load on the lifting unit?
The maximum load on the lifting unit is 100kg.
What is the dead load of the lifting unit?
The dead load is up to 100kg.
What should be ensured about the wall before installation?
Ensure that the wall can withstand the concentrated load that occurs under motor units. Also, make sure that the engine units can be fixed to the wall and that the structure is not porous. In some cases, the wall may need to be reinforced and adapted in order for engine units to be adequately fixed.
Where should the lift not be placed?
Never place the lift so that there is a risk of crushing against other solid interior fittings.
If the lift is placed in front of a flat wall, what should the gap be?
If the lift is placed in front of a flat wall, the gap should not be below 5mm or exceed 8mm.
How many power outlets does the lifting unit require?
The lifting unit requires two power outlets.
What is the maximum consumption of the lifting unit?
The lifting unit consumes a maximum of 10 A (5 A+5 A).
If the counter has a sink, where should the connections for electricity, water and drain be placed?
If the counter has a sink, the connections for electricity, water and drain should be placed centrally below the mixer.
Where else can the electrical connection be placed?
The electrical connection can also be placed in a protected position inside a motor unit.
What is required for power outlets in the bench front?
1x 230V/50Hz/5A is required for power outlets in the bench front.
What should be done after installation is complete, in terms of functional tests?
Complete functional tests should be carried out after installation.
What is the first functional test that should be done?
Test run the lift unit up and down all the way to each end position. Make sure that the lift runs freely without obstacles, risk of pinching and noise. Make sure it remains at each end position.
What is the second functional test that should be done?
Make sure that no cables get pinched and that they are fixed.
What is the third functional test that should be done?
Lower the lift and test the function of the anti-pinch strip all around the frame. Press on it while lowering. The lift should stop immediately and rise to free up space when anti-pinch protection is activated.
Who is allowed to use this product?
Only authorized persons may use this product.
What does authorization mean?
Authorization means obligation to read and follow the instructions.
What should be done before using the device?
It is very important that you read and understand the users manual before you use the device.
Where should all the accompanying documents be kept?
All of the accompanying documents shall be available for all concerned persons, be kept in a protected place and shall follow the product, if it is moved to another installation site or another house or apartment owner.
What is decisive for efficient and safe work?
Correct use, operation, inspections and maintenance are decisive for efficient and safe work.
CLICK HERE TO DOWNLOAD GRANBERG BASELIFT CORNER 6302H (01) PDF MANUAL