GODOX ML100 BI (01) PDF Document

First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and attentions.

2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.

3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.

4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.

6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.

7. This product is only suitable for use in -10°C to 40°C operating environment and normal humidity environment.

8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.

9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.

10. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet.

11. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.

12. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.

13. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.

14. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.

15. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.

16. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.

17. Please take off the protective cover before using.

18. This product complies with ROHS, CE, and FCC certification, please refer to the relevant national standards for use and operation.

19. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.

The dimensions of the GODOX ML100 BI (Excluding lens reflector) are approximately 4.80″ x 4.33″ x 1.81″.

The net weight of the GODOX ML100 BI (Excluding lens reflector) is approximately 487g.

Align the lamp head protective cover with the Godox mount and insert it. Rotate the lamp head protective cover clockwise until you hear a “click” sound, indicating that the installation is complete.

While pushing the lamp fixture’s mount locking pusher, rotate the lamp head protective cover counterclockwise to remove it.

Align the lens reflector with the Godox mount on the device and insert it. Rotate the lens reflector clockwise until you hear a “click” sound, indicating that the installation is complete.

While pushing the lamp mount locking pusher, rotate the lens reflector counterclockwise to detach it.

After connecting the power supply, continuously press the power switch button to turn the device on or off.

Press the MODE/ ⚙️ button briefly to switch modes. When the display screen shows “CCT,” it indicates that the current mode is the color temperature mode. Press the select dial briefly to select between CCT/Brightness.

When selecting CCT, scroll the select dial to adjust the CCT value. Scroll up once to increase CCT by 100K, and scroll down once to decrease CCT by 100K. The CCT range is from 2800K to 6500K.

When selecting brightness, scroll the select dial to adjust the brightness value. Scroll up once to increase the brightness by 1%, and scroll down once to decrease the brightness by 1%. The brightness range is from 0% to 100%.

Press the MODE/ ⚙️ button briefly to switch modes. When the display shows “FX,” it indicates that the current mode is the FX Mode. Press the select dial briefly to select lighting effects/lighting effect parameters/brightness.

When selecting lighting effects, scroll the select dial to choose from the 11 available lighting effect types.

When selecting lighting effect parameters, scroll the select dial to adjust specific lighting effect parameters within the range specified in the table below.

When selecting brightness, scroll the select dial to adjust the brightness value. Scroll up once to increase the brightness by 1%, and scroll down once to decrease the brightness by 1%. The brightness range is from 0% to 100%.

Continuously press the MODE/ ⚙️ button to enter the Bluetooth settings. Scroll the select dial to select Bluetooth Reset (RESET)/Bluetooth On (ON)/ Bluetooth Off (OFF).

Select Bluetooth Reset (RESET), then press the select dial briefly to perform a Bluetooth reset. After the reset is complete, it will automatically return to the main interface.

After Bluetooth is turned on, you can use the “Godox Light” app to connect to the light body.

After Bluetooth is turned off, the “Godox Light” app cannot connect to the light body.

Please power the device with an external battery pack through DC port. When the battery level is below one green bar, the display screen will automatically show a low battery symbol.

When the top of the display shows 🌡️, it indicates that the lamp bead temperature is too high. It is recommended to pause usage until the display screen no longer shows 🌡️, and then you can resume using the light.

When the full screen of the display shows 🌡️, it indicates that the light body temperature is too high. The light fixture will automatically activate the light-off function. Once the temperature of the light beads returns to normal, the light fixture will resume normal operation.

Connect the adapter to AC power, input 20V= 6A.

You can separately purchase a charging adapter or power bank, the output of which is determined by the charging adapter or power bank used.

You can separately purchase a V-mount battery accessory kit AK-B02 and one 14.8V V-mount battery.

To prevent dust buildup affecting performance, please clean the exterior of the device regularly using a soft, damp cloth.