GIGABYTE M27F (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD GIGABYTE M27F (01) PDF MANUAL


PDF Content Summary: Gaming Monitor User Guide Copyright © 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission. • In order to assist in the use of this monitor, carefully read the User Guide. • For more information, check on our website at: gigabyte.com - 2 - Gaming Monitor User Guide SAFETY INFORMATION Regulatory Notices United States of America, Federal Communications Commission Statement Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Product Name: LCD monitor Trade Name: GIGABYTE Model Number: M27F Responsible Party – U.S. Contact Information: G.B.T. Inc. Address: 17358 Railroad street, City Of Industry, CA91748 Tel.: 1-626-854-9338 Internet contact information: gigabyte.com FCC Compliance Statement: This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. - 3 - Gaming Monitor User Guide • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. Avis de conformité à la réglementation d’Industrie Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. European Union (EU) CE Declaration of Conformity This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/ EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been tested and found to comply with all essential requirements of the Directives. European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863 Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals. European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2012/19/ EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly. - 4 - Gaming Monitor User Guide WEEE Symbol Statement The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling. End of Life Directives-Recycling The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. Déclaration de Conformité aux Directives de l’Union européenne (UE) Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive Basse Tension 2014/35/UE, directive 2009/125/CE en matière d’écoconception, la directive RoHS II 2011/65/UE & la déclaration 2015/863. La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables. European Union (EU) CE-Konformitätserklärung Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und die 2015/863 Erklärung. Die Konformität mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards zurEuropäischen Normierung beurteilt. - 5 - Gaming Monitor User Guide CE declaração de conformidade Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declaração 2015/863. A conformidade com estas diretivas é verificada utilizando as normas europeias harmonizadas. CE Declaración de conformidad Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de bajo voltaje 2014/35/EU, Directiva de Ecodiseño 2009/125/EC, Directiva RoHS 2011/65/EU y la Declaración 2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas. CE Dichiarazione di conformità I prodotti con il marchio CE sono conformi con una o più delle seguenti Direttive UE, come applicabile: Direttiva EMC 2014/30/UE, Direttiva sulla bassa tensione 2014/35/UE, Direttiva Ecodesign EMC 2009/125/EC, Direttiva RoHS 2011/65/EU e Dichiarazione 2015/863. La conformità con tali direttive viene valutata utilizzando gli Standard europei armonizzati applicabili. Deklaracja zgodności UE Unii Europejskiej Urządzenie jest zgodne z następującymi dyrektywami: Dyrektywa kompatybilności elektromagnetycznej 2014/30/UE, Dyrektywa niskonapięciowej 2014/35/UE, Dyrektywa ErP 2009/125/WE, Dyrektywa RoHS 2011/65/UE i dyrektywa2015/863. Niniejsze urządzenie zostało poddane testom i stwierdzono jego zgodność z wymaganiami dyrektywy. - 6 - Gaming Monitor User Guide ES Prohlášení o shodě Toto zařízení splňuje požadavky Směrnice o Elektromagnetické kompatibilitě 2014/30/EU, Směrnice o Nízkém napětí 2014/35/EU, Směrnice ErP 2009/125/ES, Směrnice RoHS 2011/65/EU a 2015/863. Tento produkt byl testován a bylo shledáno, že splňuje všechny základní požadavky směrnic. EK megfelelőségi nyilatkozata A termék megfelelnek az alábbi irányelvek és szabványok követelményeinek, azok a kiállításidőpontjában érvényes, aktuális változatában: EMC irányelv 2014/30/EU, Kisfeszültségű villamos berendezésekre vonatkozó irányelv2014/35/EU, Környezetbarát tervezésről szóló irányelv 2009/125/EK, RoHS irányelv 2011/65/EU és 2015/863. Δήλωση συμμόρφωσης ΕΕ Είναι σε συμμόρφωση με τις διατάξεις των παρακάτω Οδηγιών της Ευρωπαϊκής Κοινότητας: Οδηγία 2014/30/ΕΕ σχετικά με την ηλεκτρομαγνητική συμβατότητα, Οοδηγία χαμηλή τάση 2014/35/EU, Οδηγία 2009/125/ΕΚ σχετικά με τον οικολογικό σχεδιασμό, Οδηγία RoHS 2011/65/ΕΕ και 2015/863. Η συμμόρφωση με αυτές τις οδηγίες αξιολογείται χρησιμοποιώντας τα ισχύοντα εναρμονισμένα ευρωπαϊκά πρότυπα. Japan Class 01 Equipment Statement 安全にご使用いただくために 接地接続は必ず電源プラグを電源につなぐ前に行って下さい。 また、接地接続を外す場合は、必ず電源プラグを電源から切り離してか ら行って下さい。 - 7 - Gaming Monitor User Guide Japan VCCI Class B Statement クラスB VCCI 基準について この装置は、クラスB情報技術装置です。この装置は、家庭環境で使 用することを目的としていますが、この装置がラジオやテレビジョン 受信機に近接して使用されると、受信障害を引き起こすことがありま す。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI-B China RoHS Compliance Statement 中国《废弃电器电子产品回收处理管理条例》提示性说明 为了更好地关爱及保护地球,当用户不再需要此产品或产品寿命终止时, 请遵守国家废弃电器电子产品回收处理相关法律法规,将其交给当地具有 国家认可的回收处理资质的厂商进行回收处理。 环保使用期限 Environment-friendly Use Period 此标识指期限(十年),电子电气产品中含有的有害物质不会 发生外泄或突变、电子电气产品用户正常使用该电子电气产品 不会对环境造成严重 污染或对其人身、财产造成严重损害的 期限。 ٛ൰፩቏ࣷ႘፣ܿಚڅঽࣽ஢Ļ ႘፣ࣷ቏

څಚ਋ؠ ֊௸ݢሠ༱ ල˄őţ˅ ࢢ˄ʼnŨ˅ Ლ˄ńť˅ ௜২ࢊ ĩńųĬķĪ ׀஍ᢢ޹ ˄őŃŃ˅ ౰׀ߗᢢ޹ ˄őŃŅņ˅

ঽඝݢᏊᏠ਋ ȡ ɐ ɐ ɐ ɐ ɐ

ᇛੰಅ֊ ȡ ɐ ɐ ɐ ɐ ɐ

ိ૮ ɐ ɐ ɐ ɐ ɐ ɐ ȡ ɐ ɐ ɐ ɐ ɐ ိؠᄪखஏإਾဂঽღ ȃ፟ףށࣙܿᇡદġŔŋİŕġIJIJĴķĵġࢆװׁ ɐĻġġװ໯ࡘ቏ࣷ႘፣኷ؠࡘ਋ྈ቏ૂ፣إல፩ܿࣽ኷ૂ஢ġňŃİŕġijķĶĸijġށࣙܿქ஢ᇋชᇵ჉ȃ ȡĻġġװ໯ࡘ቏ࣷ႘፣ፚຬ኷ؠࡘܿ਋ರᇜૂ፣إல፩ܿࣽ஢٫ڵġňŃİŕġijķĶĸijġށࣙܿქ஢ᇋชȃ - 8 -

攎䏦䄧宨⋩㗇⾃㭿㣗䟸估㓌㖶 Gaming Monitor User Guide

Declaration of the Presence Condition of the Restricted Substances Marking 姕⁁⎵䧙烉㵚㘞栗䣢☐炻✳嘇炷✳⺷炸烉ġ M27F Equipment name Type designaon (Type) 旸䓐䈑岒⍲℞⊾⬠䫎嘇 Restricted substances and its chemical symbols

╖⃫ Unit 戃 Lead (Pb) 㰆 Mercury (Hg) 捀 Cadmium (Cd) ℕ₡戣 Hexavalent chromium (Cr+6) ⣂㹜倗劗 Polybrominated biphenyls (PBB) ⣂㹜Ḵ劗慂 Polybrominated diphenyls ethers (PBDE)

⟹㕁⢾㟮 ⼴㭤 㵚㘞朊㜧 暣嶗㜧䳬ẞ ⸽⹏ 暣㸸䶂 ℞Ṿ䶂㛸 ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯

⁁侫1.˶崭↢0.1 wt %˷⍲˶崭↢0.01 wt %˷Ὢ㊯旸䓐䈑岒ᷳ䘦↮㭼⏓慷崭↢䘦↮㭼⏓慷➢㸾ῤˤ Note 1;˶Exceeding 0.1 wt %˷ and˶exceeding 0.01 wt %˷indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condion. ⁁侫2.˶◯˷Ὢ㊯娚枭旸䓐䈑岒ᷳ䘦↮㭼⏓慷㛒崭↢䘦↮㭼⏓慷➢㸾ῤˤ Note 2;˶◯˷indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. ⁁侫3.˶炼˷Ὢ㊯娚枭旸䓐䈑岒䁢㌺昌枭䚖ˤ Note 3;The˶炼˷indicates that the restricted substance corresponds to the exempon. - 9 - Gaming Monitor User Guide Safety Precautions Read through the following Safety Precautions before using the monitor. • Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer. • Keep the plastic packaging bag for the product in a place that cannot be reached by children. • Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located. • The power cord plug must be connected to a properly wired and grounded power outlet. • Do not touch the plug with wet hands, otherwise easily cause electric shock. • Place the monitor in a stable and well-ventilated place. • Do not place the monitor near any heat sources such as electric radiators or direct sunlight. • The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects. • Do not use the monitor near water, drinks, or all types of liquids. Failure to do so may result in electric shock or damage to the monitor. • Make sure to unplug the monitor from the power outlet before cleaning. • As the screen surface is easy to be scratched, avoid touching the surface with any hard or sharp object. • Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the monitor if required. However, never spray the cleaner directly onto the screen. • Disconnect the power cable if the monitor is not being used for a long period of time. • Do not attempt to disassemble or repair the monitor yourself. - 10 - Gaming Monitor User Guide CONTENTS Safety Information .....................................................................................................................3 Regulatory Notices...........................................................................................................3 Safety Precautions.........................................................................................................10 Introduction ..............................................................................................................................12 Unpacking........................................................................................................................12 Package Contents..........................................................................................................14 Product Overview..........................................................................................................15 Getting Started.........................................................................................................................17 Installing the Monitor Base ........................................................................................17 Adjusting the Viewing Angle.....................................................................................19 Installing a Wall-Mount Bracket (Optional) ..........................................................20 Making Connections....................................................................................................22 Using the Device......................................................................................................................23 Turning the Power On/Off..........................................................................................23 User Comfort Recommendations............................................................................24 Selecting the Input Source.........................................................................................24 Operations.................................................................................................................................25 Quick Menu......................................................................................................................25 Configure the Device Settings..................................................................................33 Appendices................................................................................................................................42 Specifications..................................................................................................................42 Supported Timing List..................................................................................................43 Troubleshooting.............................................................................................................44 Basic Care..........................................................................................................................45 Notes on USB Charging...............................................................................................45 GIGABYTE Service Information.................................................................................45 - 11 - Gaming Monitor User Guide INTRODUCTION Unpacking 1. Open the upper cover of the packaging box. Then observe the unpacking label attached on the inner cover. 2. Making sure the box is in the correct orientation, carefully lay the box on the stable surface. UP 3. Open the inner cover. Openings 4. Grab the EPS foam assembly (through the openings) to pull it out of the box. - 12 - Gaming Monitor User Guide 5. Remove the items from the upper EPS foam. 6. Remove the upper EPS foam. Then you can remove the monitor from the lower EPS foam. - 13 - Gaming Monitor User Guide Package Contents The following items come with your packaging box. If any of them is missing, please contact your local dealer. Monitor Monitor Base Power Cable Power Adapter HDMI Cable USB Cable

Multilingual Installation Guide M27F Warranty Card

DP Cable Quick Start Guide Warranty Card Note: Please keep the packaging box and packing materials for future transportation of the monitor. - 14 - Gaming Monitor User Guide Product Overview Front View 1 1 Power LED - 15 - Gaming Monitor User Guide Rear View DP HDMI-1 HDMI-2 TYPE-C USB 3.0 DC 1 2 3 DP HDMI-1 HDMI-2 TYPE-C USB 3.0 DC 4 5 6 7 8 9 10

1 Control button 2 KVM button 3 Kensington lock 4 DisplayPort 5 HDMI ports (x2) 6 USB Type-C port 7 Headphone jack 8 USB upstream port 9 USB 3.0 ports (x2) 10 DC IN jack

- 16 - Gaming Monitor User Guide GETTING STARTED Installing the Monitor Base 1. Place the monitor on the lower EPS foam, with the screen facing down. 2. Align the monitor base with the standoff underneath the stand. Then attach the base onto the stand. 3. Lift the screw ring and turn it clockwise to secure the monitor base in place. - 17 - Gaming Monitor User Guide 4. Lift the monitor to an upright position and place it on a table. 5. Remove the small block of EPS foam located in between the rear of the screen and the stand. Then remove the safety plate from its slot. Note: By removing the safety plate, you can now adjust the screen to the desired height. 2 1 - 18 - Gaming Monitor User Guide Adjusting the Viewing Angle Note: Hold the monitor base so that the screen does not topple when you make the adjustment. Adjusting the Tilt Angle Tilt the screen forward or backward to the desired viewing angle (5˚ to 20˚). 20° 5° Adjusting the Screen Height Lower or raise the screen to the desired height (0 to 130mm). 130 mm - 19 - Gaming Monitor User Guide Installing a Wall-Mount Bracket (Optional) Use only the 100 x 100 mm wall mount kit recommended by the manufacturer. 1. Place the monitor on the lower EPS foam, with the screen facing down. 2. Remove the screws securing the stand to the monitor. 3. Remove the stand. - 20 - Gaming Monitor User Guide 4. Attach the mounting bracket to the mounting holes at the rear of the monitor. Then use the screws to secure the bracket in place. 100 mm 100 mm DP HDMI-1 HDMI-2 TYPE-C USB 3.0 DC Note: To mount the monitor on the wall, refer to the installation guide that is included in the wall-mount bracket kit. - 21 -

Gaming Monitor User Guide Making Connections DP HDMI-1 HDMI-2 TYPE-C USB 3.0 DC 1 2 3 4 5 Keyboard 7 Headphone 6 Power outlet 1 DisplayPort cable Mouse & USB disk drive Computer Computer 5 USB cable 2 HDMI cable 3 USB Type-C cable 4 USB (A-Male to B-Male) cable 6 Power adapter and power cable 7 Headphone cable

- 22 - Gaming Monitor User Guide USING THE DEVICE Turning the Power On/Off Power On 1. Connect the power cable to the power adapter. 2. Connect the power adapter to the DC IN jack at the rear of the monitor. 3. Connect the power cable to a power outlet. 4. Press the Control button to turn on the monitor. The Power LED will light in white, indicating the monitor is ready to use. Note: If no signal, the monitor will show No Signal notification for a while. Then, the monitor will go to power saving mode and the Power LED lights white and starts blinking with a period of one second. Power Off Press the Control button for 2 seconds to turn off the monitor. Note: When the Main menu appears on the screen, you can also turn off the monitor by moving the Control button down ( ). Refer to page 27. - 23 - Gaming Monitor User Guide User Comfort Recommendations The following are some tips for comfortable viewing of your monitor: • Optimal viewing distances for monitors range from approximately 510 mm to 760 mm (20” to 30”). • A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. • Use adequate lighting for the type of work you are performing. • Take regular and frequent breaks (at least for 10 minutes) every half hour. • Be sure to periodically look away from your monitor screen and focus on a far object for at least 20 seconds during the breaks. • Eye exercise can help reduce eye strain. Repeat these exercises frequently: (1) look up and down (2) slowly roll your eye (3) move your eyes diagonally. Selecting the Input Source 1. Move the Control button right

( ) to enter the Input menu. 2. Move the Control button up/ down ( ) to select the desired input source. Then press the Control button to confirm. Input HDMI 1 HDMI2 DisplayPort TYPE-C Select Exit

- 24 - Gaming Monitor User Guide OPERATIONS Quick Menu Hot Key By default, the Control button has been assigned with the specific function. Note: To change the preset hot key function, refer to the “Quick Switch” section on page 39. To access the hot key function, do the following: • Move the Control button up ( ) to enter the Black Equalizer menu. Move the Control button

up/down ( ) to adjust the setting and press the Control button to confirm. Black Equalizer 10 Adjust Exit

- 25 - Gaming Monitor User Guide • Move the Control button down ( ) to enter the Picture Mode menu. Move the Control button

up/down ( ) to select the desired option and press the Control button to confirm. Picture Mode Standard FPS RTS/RPG Movie Reader sRGB Select Exit

• Move the Control button left ( ) to enter the Volume menu. Move the Control button

up/down ( ) to adjust the headphone volume level and press the Control button to confirm. Volume 50 Adjust Exit

• Move the Control button right ( ) to enter the the Input menu. Refer to the “Selecting the Input Source” section. Note: To close the menu, move the Control button left ( ). - 26 - Gaming Monitor User Guide Function Key Guide Press the Control button to display the Main menu. Settings SETTING

KVM (Multi Task) MULTI TASK GAME ASSIST EXIT Game Assist

Exit POWER OFF Power Off

Then use the Control button to select the desired function and configure the related settings. KVM When the Main menu appears on the screen, move the Control button left ( ) to enter the KVM menu. KVM KVM Switch KVM status KVM Wizard

KVM ON KVM Reset Select Exit USB-B : HDMI 1 TYPE-C : TYPE-C

• KVM Switch: Switch the input source that has been assigned to USB-B or Type-C connection in the KVM Wizard settings. When there are several input signals connected to the device, a message box will appear on the screen once the system detected USB Type-C input signal. - 27 - Gaming Monitor User Guide KVM Press to switch device. To switch to USB Type-C input source, simply press the KVM button or the Control button. However, when there is no input signal from currently selected input source, the system will return to the previous connected input source. Note: This option will be disabled if the KVM button function is disabled (KVM OFF). • KVM Wizard: Configure the KVM related settings. Set the input source to be bound with USB Type-B connection first, and then following with USB Type-C connection.

Select USB-B Display HDMI 1 HDMI2 DisplayPort TYPE-C Select Enter Select TYPE-C Display HDMI 1 HDMI2 DisplayPort TYPE-C Select Enter

USB-B Display Selection TYPE-C Display Selection Note: If you set the USB-B Display setting to TYPE-C, the TYPE-C Display menu option will automatically be disabled. You will then see the KVM KVM status in the KVM Wizard page as below. KVM Switch KVM status KVM Wizard

KVM ON KVM Reset Select Exit USB-B : TYPE-C TYPE-C : N/A - 28 -

Gaming Monitor User Guide • KVM ON/OFF: Enable/Disable the KVM button function. √ Select ON to enable the KVM button function. Once the system detected USB Type-C input signal, a message box will appear on the screen. KVM Press to switch device. Press the KVM button or the Control button to switch to USB Type-C input source. Note: When the KVM button function is enabled, the KVM ON will be displayed on the left panel. √ Select OFF to disable the KVM button function. Note: When the KVM button function is disabled, the KVM OFF will be displayed on the left panel. • KVM Reset: Restore the KVM default settings. √ HDMI 1 input source is bound with USB Type-B connection. √ USB Type-C input source is bound with USB Type-C connection. √ The KVM ON/OFF function is set to ON. - 29 - Gaming Monitor User Guide Game Assist When the Main menu appears on the screen, move the Control button right ( ) to enter the Game Assist menu. GameAssist

Game Info Crosshair Dashboard Display Alignment Gaming Timer Gaming Counter Refresh Rate Info Location OFF Count Up Count Down

Select Exit • Game Info: Configure the FPS (First Person Shooting) game related settings. √ Select Gaming Timer to select countdown timer mode. To disable this function, set the setting to OFF. √ Select Gaming Counter or Refresh Rate to enable/disable the gaming counter or real-time refresh rate setting. √ Select Info Location to specify the location of the information to be shown on the screen. - 30 - Gaming Monitor User Guide 0 0 : 0 0 0 60 • Crosshair: Select the desired crosshair type to suit your gaming environment. It makes aiming much easier. • Dashboard: Configure the dashboard settings. GameAssist

Game Info Crosshair Dashboard Display Alignment ON OFF Dashboard Location CPU Temperature CPU Frequency CPU Fan Speed CPU Usage Rate GPU Temperature GPU Frequency GPU Fan Speed

Select Exit √ ON: Enable the function. Then select the desired option(s) to be shown on the screen. √ OFF: Disable the function. - 31 - Gaming Monitor User Guide √ Dashboard Location: Specify the location of the Dashboard information to be shown on the screen. Once the Dashboard configuration is complete, it will transfer the system data to the SOC through the USB port and display the value of the selected function(s) on the screen. CPU Temperature CPU Frequency CPU Fan Speed CPU Usage Rate GPU Temperature GPU Frequency GPU Fan Speed GPU Usage Rate AORUS Mouse DPI Note: Make sure the USB cable is properly connected to the USB upstream port of the monitor and the USB port of your computer. • Display Alignment: When the function is enabled, it displays the alignment lines on the four sides of the screen, providing handy tool for you to line up multiple monitors perfectly. - 32 -

Balance60 HZON Picture Mode Standard Configure the Device Settings Gaming Monitor User Guide

When the Main menu appears on the screen, move the Control button up ( ) to enter the Settings menu. 10 Note: Use the Control button to navigate through the menu and make adjustments. ium Exit Move/Adjust Enter/Confirm Button Guide Gaming Configure the game related settings.

Resolution 1920X1080 Gaming Picture Display System Language Save Settings Reset All Black Equalizer 10 Aim Stabilizer OFF Aim Stabilizer Black Equalizer Super Resolution Display Mode Overdrive AMD FreeSync Premium Overdrive Balance 10 Refresh Rate 60 HZ AMD FreeSync Premium ON Picture Mode Standard Exit Move/Adjust Enter/Confirm

Item Description Aim Stabilizer When this function is enabled, it reduces the motion blur in a fast moving games. Note: This function is not available under the following conditions: - when the frequency setting is lower than 100Hz. - when the AMD FreeSync Premium function is activated. Black Equalizer Adjust the brightness of the black areas. - 33 - Gaming Monitor User Guide Item Description

Super Resolution Sharpen the low resolution images.

Display Mode Select the aspect ratio of the screen. • Full: Scale the input image to fill the screen. Ideal for 16:9 aspect images. • Aspect: Display the input image without geometric distortion filling as much of the screen as possible. Overdrive Improve the response time of the LCD monitor.

AMD FreeSync Premium When this function is enabled, it eliminates the screen lag and tearing while playing games.

- 34 - Gaming Monitor User Guide Picture Configure the image related settings.

SDR Brightness 85 Gaming Picture Display System Language Save Settings Reset All Contrast 50 Standard FPS RTS/RPG Movie Reader sRGB Custom 1 Sharpness 5 Brightness Contrast Color Vibrance Sharpness Gamma Color Temp. Low Blue Light Gamma Gamma 3 Color Temperature Normal Picture Mode Standard 85 Exit Move/Adjust Enter/Confirm

Select the one of the preset picture mode. • Standard: For editing documents or browsing websites. • FPS: For playing FPS (First Person Shooting) games. • RTS/RPG: For playing RTS (Real-Time Strategy) or RPG (Role-Playing Game) games. • Movie: For watching movies. • Reader: For viewing documents. • sRGB: For viewing photos and graphics on the computer. • Custom 1: Customized picture mode settings. • Custom 2: Customized picture mode settings. • Custom 3: Customized picture mode settings. Then you can configure the following image settings. Item Description Brightness Adjust the brightness of the image. Contrast Adjust the contrast of the image. Color Vibrance Adjust the intensity of the more muted colors. Sharpness Adjust the sharpness of the image. Gamma Adjust the middle level of luminance. - 35 - Gaming Monitor User Guide Item Description

Color Temperature Select the color temperature. Note: Select User Define to customize the color temperature by adjusting the red (R), green (G), or blue (B) level according to your preference.

Low Blue Light Reduce the amount of blue light exposure from the screen. • Level 0: No change. • Level 1~10: The higher the level, the more blue light will be reduced. Note: Level 10 is optimized setting. It is compliance with TUV Low Blue Light Certification. DCR Adjust the black level of the image to achieve the optimum contrast. Senseye Demo Split the screen in half (2 windows). The image of the selected mode with its default settings will appear on the left window and the adjusted image with the new settings will appear on the right window. Reset Picture Reset all Picture settings to the default settings. - 36 - Gaming Monitor User Guide Display Configure the display screen related settings.

SDR Brightness 85 Gaming Contrast 50 Input Sharpness 5 HDMI 1 Gamma Gamma 3 Color Temperature Normal Picture Mode Standard

Picture Display System Language Save Settings Reset All HDMI RGB PC Range Overscan HDMI 2 DisplayPort TYPE-C Exit Move/Adjust Enter/Confirm

Item Description Input Select the input source.

HDMI RGB PC Range Select an appropriate RGB range setting or let the monitor to detect it automatically. Note: This option is only available for HDMI input.

Overscan When this function is enabled, it slightly enlarges the input image to hide the outermost edges of the image. Note: This option is only available for HDMI input. - 37 - Gaming Monitor User Guide System Configure the system related settings.

SDR Brightness 85 Gaming Contrast 50 Audio Sharpness 5 Volume Gamma Gamma 3 Color Temperature Normal Picture Mode Standard

Picture Display System Language Save Settings Reset All OSD Setting Quick Switch Other Settings Mute 50 Exit Move/Adjust Enter/Confirm

Item Description Audio Configure the audio settings. • Volume: Adjust the volume level. • Mute: Enable/Disable the mute function. OSD Settings Configure the on-screen display (OSD) menu related settings. • Display Time: Set the length of time the OSD menu remains on the screen. • OSD Transparency: Adjust the OSD menu transparency. • OSD Lock: When this function is enabled, no OSD adjustment is allowed. Note: To disable the OSD lock function, press the Control key. When the message appears on the screen, select Yes to confirm. The button is locked confirm to unlock OSD No Yes - 38 - Gaming Monitor User Guide Item Description Quick Switch Assign the function of the hot keys. Available options: Aim Stabilizer, Black Equalizer, Low Blue Light, Volume, Input, Contrast, Brightness, and Picture Mode. The default setting of the hot keys as below: ⮀ Up ( ): Black Equalizer ⮀ Down ( ): Picture Mode ⮀ Right ( ): Input ⮀ Left ( ): Volume Other Settings • Resolution Notice: When this function is enabled, the recommended resolution message will appear on the screen when the monitor switches to another input source. • Input Auto Switch: When this function is enabled, it automatically switches to an available input source. • Auto Power OFF: When this function is enabled, the monitor will automatically turn off after a certain amount of time. • DisplayPort Ver.: Set the DisplayPort version to 1.1 or 1.2. Note: Make sure to configure this option based on the DisplayPort version supported by your graphics card. - 39 - Gaming Monitor User Guide Language Select an available language for the OSD menu.

SDR Brightness 85 Gaming Picture Display System Language Save Settings Reset All Save Settings Contrast 50 English 互Ṿ 䯑Ṿ Deutsch Français 㘶㝽嫯 한국어 Sharpness 5 Gamma Gamma 3 Color Temperature Normal Picture Mode Standard Exit Move/Adjust Enter/Confirm

Set the personalized OSD configurations for Setting1, Setting2, or Setting3.

SDR Brightness 85 Gaming Picture Display System Language Save Settings Reset All Contrast 50 Setting1 Setting2 Setting3 Sharpness 5 Save Load Gamma Gamma 3 Color Temperature Normal Picture Mode Standard Exit Move/Adjust Enter/Confirm

Item Description Save Save the customized settings. Load Load the saved settings. - 40 - Gaming Monitor User Guide Reset All Restore the monitor to its factory default settings.

SDR Brightness 85 Gaming Picture Display System Language Save Settings Reset All Contrast 50 Sharpness 5 Gamma Gamma 3 Color Temperature Normal Picture Mode Standard Exit Move/Adjust Enter/Confirm

- 41 -

Gaming Monitor User Guide APPENDICES Specifications Item Specifications Panel Size 27-inch Aspect Ratio 16:9 Resolution 1920 x 1080 Refresh Rate 144Hz LED Life 30,000 hours Pixel Pitch 0.31125 x 0.31125 Response Time 1ms (MPRT) Brightness 300nits (typ.) Contrast Ratio 1000:1 (typ.) Dynamic Contrast Ratio 12M:1 (typ.) Color Depth 16.7M Active Display Area 597.6 (H) x 336.15 (V) Viewing Angle 178°(H) / 178°(V) Frequency 144Hz Input/Output Terminals • 2x HDMI 2.0 • 1x DP1.2 • 1x Headphone • 1x USB upstream • 2x USB 3.0 (downstream, 5V/1.5A) • 1x USB Type-C (5V/3A)

Power Supply AC 100~240V at 50/60Hz AC Adapter Model Asian Power Devices Inc. DA-65C19 Dongguan Yingju Power Co., Ltd. YJS065l-1903420D Power Consumptions • On: 61W (Max.) • Standby: 0.5W • Off: 0.3W Dimensions (W x H x D) 615.1 x 533.6 x 202.97 mm (with stand) - 42 - Gaming Monitor User Guide Item Specifications Weight • 5.5 ±0.5 kgs (with stand) • 3.3 ±0.5 kgs (without stand) Temperature Range (operation)0°C to 40°C Note: Specifications subject to change without notice. Supported Timing List Timing List HDMI 2.0 Display Port 1.2 / USB Type-C 640x480@60Hz V V 640x480@75Hz V V 720x480@60Hz V V 800x600@60Hz V V 800x600@75Hz V V 1024x768@60Hz V V 1024x768@75Hz V V 1280x720@60Hz V V 1280x720@120Hz V V 1280x720@144Hz V V 1920x1080@60Hz V V 1920x1080@120Hz V V 1920x1080@144Hz V V - 43 - Gaming Monitor User Guide Troubleshooting Problem Possible Solution(s) No power • Make sure the power cable is properly connected to the power source and the monitor. • Check the cable and plug to make sure they are not broken. • Make sure the monitor is turned on.

No image appears on the screen The image does not fill the entire screen The colors are distorted No sound or volume is low • Make sure the monitor and the computer are properly connected and both devices are turned on. • Make sure you have selected the correct input source. Refer to page 24 or 37. • Adjust the Brightness and Contrast settings. Refer to page 35. • Try different Display Mode (aspect ratio) setting. Refer to page 34. • Make sure the input signal cable is properly connected. • Configure the image related settings. Refer to the “Picture” section. • Make sure the headphone cable is properly connected. • Adjust the volume level. Refer to page 26 or 38. • Adjust your computer sound related settings.

Note: If the problem persists, please contact our customer service for further assistance. - 44 - Gaming Monitor User Guide Basic Care When the screen becomes dirty, do the following to clean the screen: • Wipe the screen with your soft, lint-free cloth to remove any residual dust. • Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen gently with the damp cloth. Note: • Make sure that the cloth is damp, but not wet. • When wiping, avoid applying excessive pressure on the screen. • Acidic or abrasive cleaners can damage the screen. Notes on USB Charging The following devices are not compatible with BC 1.2 of CDP mode. When the Hub is connected to a PC, these devices cannot be charged using the USB cable. Vendor Device PID/VID Apple IPad PID_129A/VID_05AC Samsung Galaxy Tab2 10.1 PID_6860/VID_04E8 Samsung GALAXY TabPro PID_6860/VID_04E8 GIGABYTE Service Information More service information, please visit GIGABYTE official website: gigabyte.com/ - 45 -


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply