GARMIN CAMPER 895 (01) PDF MANUAL

GARMIN CAMPER 895 (01) PDF SUMMARY:

How do I mount and power the device in my vehicle?

1. Open the lever, press the suction cup to the windshield, and flip the lever back toward the windshield.
   • The lever must be oriented toward the top of the windshield.
2. Plug the vehicle power cable into the port on the mount.
3. If necessary, loosen the thumbscrew on the suction cup arm and the nut on the ball mount, and adjust the mount for better viewing and operation.
4. Tighten the thumbscrew on the suction cup arm and the nut on the ball mount.

How do I turn the device on or off?

• To turn the device on, press the power key.
• To turn the device off, press and hold the power key.

How do I acquire GPS signals?

The first time you turn on the device, it may take a few minutes to acquire satellite signals.

How do I open an app?

Select the app.

How do I add shortcuts to the home screen?

1. From the home screen, select Settings.
2. Select Home Screen > Add Shortcut.
3. Select an item to add as a shortcut.

How do I view notifications?

Select the notification icon in the status bar.

What do the status bar icons mean?

• The Bluetooth symbol with a line through it means that Bluetooth technology is disabled.
• The Bluetooth symbol means that Bluetooth technology is enabled and the device is connected to a smartphone.
• The Wi‑Fi symbol with a line through it means that the device is not connected to a Wi‑Fi network.
• The Wi‑Fi symbol means the device is connected to a Wi‑Fi network.
• The smartphone symbol with a line through it means that the device is not connected to a smartphone.
• The smartphone symbol means that the device is connected to a smartphone.
• The battery symbol shows the current battery level.

How do I use the touchscreen?

• Select: Tap the screen.
• Drag: Hold your finger on the screen and slide your finger to move an item.
• Swipe: Quickly slide your finger across the screen.

How do I adjust the screen brightness?

1. From the home screen, select Settings.
2. Select Display > Brightness.
3. Use the slider to adjust the brightness.

How do I add a vehicle profile?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Vehicle Profiles > Add Profile.
3. Select a vehicle type.
4. Enter the requested information.

How do I switch the vehicle profile?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Vehicle Profiles.
3. Select a vehicle profile.

How do I add propane tanks?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Vehicle Profiles.
3. Select a vehicle profile.
4. Select Propane Tanks.
5. Select Add Tank.
6. Enter the requested information.

How do I edit a vehicle profile?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Vehicle Profiles.
3. Select a vehicle profile.
4. Select an option to edit.

How do I enable or disable driver alerts?

1. From the home screen, select Settings.
2. Select Driver Assistance > Driver Alerts.
3. Select a driver alert.
4. Select the toggle switch to enable or disable the alert.

What are red light and speed cameras?

The device includes information about red light and speed cameras.

What are routes?

The device calculates a route from your current location to your destination.

How do I use the route planner?

You can use the route planner to create and save routes with multiple destinations.

How do I edit and save my active route?

1. Select Where To? > Saved.
2. Select a route.
3. Select an option:
   • To edit the route, select Edit Route.
   • To save the route, select Save.

How do I start a route?

• Select Where To?.
• Select a destination.
• Select Go!.

How do I start a route using the road trip routes feature?

You can start a route using the road trip routes feature. This feature helps you find exciting and scenic routes.

How do I start a route by using the map?

1. Select View Map.
2. Select a location on the map.
3. Select Go!.

How do I go home?

Select Where To? > Go Home.

What does my route on the map look like?

Your route is marked with a magenta line on the map.

What is active lane guidance?

When you approach an exit or complex intersection, the driving map displays an animated graphic that indicates the proper lane to be in for your planned route.

How do I view turns and directions?

As you navigate a route, the device provides visual and audible instructions for navigating the route.

How do I view the entire route on the map?

Select the route on the map.

How do I know when I have arrived at my destination?

When you approach your destination, the device plays a tone and displays an arrival message.

How do I change my active route?

1. While navigating a route, select Options.
2. Select an option:
   • To take a detour, select Detour.
   • To stop the route, select Stop Route.
   • To change the route calculation mode, select Routing Mode.

How do I add a location to my route?

1. While navigating a route, select Where To?.
2. Search for a location.
3. Select Go!.

How do I shape my route?

1. Select View Map.
2. Select and drag a point on the route line.
3. Select Go!.

How do I take a detour?

1. While navigating a route, select Options > Detour.
2. Select an option:
   • To detour around the next incident on the route, select Next Incident.
   • To detour around the route for a specific distance, select Detour by Distance.

How do I change the route calculation mode?

1. From the home screen, select Settings.
2. Select Navigation > Route Calculation.
3. Select a routing mode.

How do I stop the route?

Select Options > Stop Route.

What are suggested routes?

Suggested routes appear to the right of the driving map. You can select a suggested route to view more details.

How do I avoid delays, tolls, and areas?

1. While navigating a route, select Options > Avoidances.
2. Select an avoidance.

How do I avoid traffic delays on my route?

1. From the home screen, select Settings.
2. Select Traffic > Avoid Traffic.
3. Select Enabled.

How do I avoid toll roads?

1. From the home screen, select Settings.
2. Select Navigation > Avoidances > Toll Roads.
3. Select the toggle switch to enable toll avoidance.

How do I avoid toll stickers?

1. From the home screen, select Settings.
2. Select Navigation > Avoidances > Toll Stickers.
3. Select the toggle switch to enable toll sticker avoidance.

How do I avoid road features?

1. From the home screen, select Settings.
2. Select Navigation > Avoidances.
3. Select the toggle switch next to the road feature you want to avoid.

How do I avoid environmental zones?

1. From the home screen, select Settings.
2. Select Navigation > Avoidances > Environmental Zones.
3. Select the toggle switch to enable environmental zone avoidance.

What are custom avoidances?

You can create custom avoidances to avoid specific areas or streets on your route.

How do I find campgrounds?

1. Select Where To? > Campgrounds.
2. Select a campground.
3. Select Go!.

How do I find campgrounds with amenities?

You can search for campgrounds that offer specific amenities.

How do I find RV services?

1. Select Where To? > RV Services.
2. Select a service.
3. Select Go!.

How do I find a location using the search bar?

1. Select Where To?.
2. Enter the name or address of the location.

What are trendy places?

Trendy places include popular restaurants, bars, and stores.

How do I perform a Trendy Places search?

1. Select Where To? > Trendy Places.
2. Select a category.
3. Select a location.
4. Select Go!.

How do I find an address?

1. Select Where To? > Address.
2. Enter the address.

How do I find a location by category?

1. Select Where To? > Categories.
2. Select a category.

How do I search within a category?

1. After selecting a category, enter a search term.

What are location search results?

After performing a search, the device displays a list of matching locations.

How do I change the search area?

1. From the location search results, select Search Area.
2. Select an option:
   • To search near your current location, select Near Me.
   • To search near a city, select Near City.
   • To search near a different location, select Near Other.

What are custom points of interest?

Custom points of interest are locations that you create or add to your device.

How do I install POI Loader?

You can use the POI Loader application to install custom POIs on your device.

How do I find custom POIs?

1. Select Where To? > Custom POIs.
2. Select a POI category.
3. Select a POI.
4. Select Go!.

How do I find an intersection?

1. Select Where To? > Intersection.
2. Enter the first street name.
3. Enter the second street name.

How do I find a location using coordinates?

1. Select Where To? > Coordinates.
2. Enter the coordinates.

What is Foursquare?

Foursquare is a database of locations with detailed information, reviews, and ratings.

How do I search Foursquare points of interest?

1. Select Where To? > Foursquare.
2. Enter a search term.
3. Select a location.
4. Select Go!.

How do I view Foursquare location details?

From the location information page, select Foursquare Details.

What is Tripadvisor?

Tripadvisor is a website and mobile app that provides reviews and ratings for hotels, restaurants, attractions, and activities.

How do I find Tripadvisor points of interest?

1. Select Where To? > Tripadvisor.
2. Enter a search term.
3. Select a location.
4. Select Go!.

How do I view recently found locations?

1. Select Where To?.
2. Select Recent.

How do I clear the list of recently found locations?

1. Select Where To? > Recent.
2. Select Clear.

How do I view current location information?

1. Select Where To? > Current Location.

How do I find emergency services and fuel?

1. Select Where To? > Emergency.

How do I get directions to my current location?

1. Ask someone to open the Garmin Drive™ app on their smartphone.
2. Ask them to select Send to Device.
3. Ask them to enter your current location.

How do I add a shortcut?

1. From the location information page, select Save.
2. Select Add Shortcut.

How do I remove a shortcut?

1. From the location information page, select Edit.
2. Select Remove Shortcut.

How do I save a location?

1. From the location information page, select Save.
2. Enter a name for the location.
3. Select Save.

How do I save my current location?

1. Select Where To? > Current Location.
2. Select Save.
3. Enter a name for the location.
4. Select Save.

How do I edit a saved location?

1. Select Where To? > Saved.
2. Select a location.
3. Select Edit.
4. Edit the location information.
5. Select Save.

How do I assign categories to a saved location?

You can assign categories to a saved location to help you organize your saved locations.

How do I delete a saved location?

1. Select Where To? > Saved.
2. Select a location.
3. Select Delete.

What are the map tools?

• Traffic: Displays traffic information.
• Volume: Adjusts the device volume.
• Brightness: Adjusts the screen brightness.
• Backlight: Turns the backlight on or off.
• View Map: Displays the map.
• Where To?: Searches for locations and routes.
• View Trip Data: Displays trip information.

How do I view a map tool?

Select a map tool on the map.

What is Up Ahead?

The Up Ahead page displays locations along your route, such as restaurants, rest areas, and gas stations.

How do I view upcoming locations?

Select Up Ahead.

How do I customize the Up Ahead categories?

You can choose to show or hide specific categories on the Up Ahead page.

What is planning your arrival?

The device helps you plan your arrival by providing information about traffic, parking, and other factors.

What is Cities Ahead?

The Cities Ahead page displays cities and highway exit services along your route.

How do I view upcoming cities and exit services?

Select Cities Ahead.

What do the warning and alert symbols mean?

The device uses symbols to alert you to potential hazards and upcoming road conditions.

What are restriction warnings?

The device uses symbols to alert you to restrictions, such as weight limits, height limits, and hazardous materials restrictions.

What are road condition warnings?

The device uses symbols to alert you to upcoming road conditions, such as sharp curves, steep hills, and unpaved roads.

What are alerts?

The device uses alerts to notify you of important information, such as upcoming traffic incidents and weather conditions.

How do I view trip data from the map?

1. From the map, select Trip Data.
2. Select a data field.

How do I reset trip information?

1. From the map, select Trip Data.
2. Select Reset.

How do I view upcoming traffic?

1. From the map, select Traffic.
2. Select Upcoming.

How do I view traffic on the map?

From the map, select Traffic.

How do I search for traffic incidents?

1. From the map, select Traffic.
2. Select Incidents.

How do I customize the map layers?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Map Layers.
3. Select the check box next to each layer you want to show on the map.

How do I change the map data field?

1. From the home screen, select Settings.
2. Select Map & Vehicle > Map Data Field.
3. Select a data field.

How do I change the map perspective?

1. From the map, select Options > Perspective.
2. Select a map perspective.

How do I pair with my smartphone?

1. From the home screen, select Settings.
2. Select Bluetooth.
3. Bring the devices within 3 m (10 ft.) of each other.
4. On your smartphone, enable Bluetooth technology.
5. On your device, select Add Device.
6. On your smartphone, select the device from the list of available Bluetooth devices.

What are some tips after pairing the devices?

• You may need to enter a PIN on your smartphone. If you are unsure of the PIN, check the documentation for your smartphone.
• If the pairing fails, move the devices closer together and try again.
• To use all of the smartphone-enabled features, you must install the Garmin Drive app on your smartphone.

How do I go to an address or location using the Garmin Drive App?

1. From the Garmin Drive app on your smartphone, search for a location.
2. Select Send to Device.

What are smart notifications?

While connected to a smartphone, the device can display notifications from your smartphone.

How do I receive notifications?

1. Pair your device with a compatible smartphone.
2. Enable notifications on your smartphone.

What is hands-free calling?

While connected to a smartphone, the device can be used to make and receive phone calls.

How do I place a call?

1. Select Phone > Call.
2. Select a contact.
3. Select Call.

How do I receive a call?

When you receive a call, select Answer or Ignore.

How do I use in-call options?

During a call, select Options to access the following options:

• End Call: Ends the current call.
• Mute: Mutes the microphone.
• Keypad: Opens the keypad.
• Contacts: Displays your contacts.
• Hold: Places the current call on hold.

How do I save a phone number as a preset?

1. Select Phone > Presets > Add Preset.
2. Enter the phone number.
3. Enter a name for the preset.
4. Select Save.

How do I enable or disable Bluetooth features?

1. From the home screen, select Settings.
2. Select Bluetooth > Features.
3. Select the toggle switch next to each feature to enable or disable it.

How do I show or hide app notifications (Android™)?

1. From the home screen, select Settings.
2. Select Bluetooth > Smart Notifications > App Notifications.
3. Select the toggle switch next to each app to show or hide its notifications.

How do I show or hide notification categories for my Apple® device?

1. From the home screen, select Settings.
2. Select Bluetooth > Smart Notifications > Notification Categories.
3. Select the toggle switch next to each category to show or hide its notifications.

How do I disconnect a Bluetooth device?

1. From the home screen, select Settings.
2. Select Bluetooth.
3. Select the device.
4. Select Disconnect.

How do I delete a paired Bluetooth device?

1. From the home screen, select Settings.
2. Select Bluetooth.
3. Select the device.
4. Select Delete Device.

How do I receive traffic data using my smartphone?

If you have paired your device with a compatible smartphone, you can receive traffic data using your smartphone’s internet connection.

How do I view traffic on the map?

Traffic data is displayed on the map as colored lines.

• Green lines indicate traffic is flowing freely.
• Yellow lines indicate traffic is slowing down.
• Orange lines indicate traffic is moving slowly.
• Red lines indicate traffic is stopped or moving very slowly.

How do I search for traffic incidents?

1. Select Where To? > Traffic.
2. Select Incidents.

What are some tips for speaking to the device?

• Speak clearly and directly into the microphone.
• Speak at a normal volume.
• Speak the entire command in one phrase.
• Avoid background noise.
• Pause briefly after issuing a command.

How do I launch Garmin Voice-Activated Navigation?

Say “Voice Command.”

How do I check my arrival time?

Say “Arrival.”

How do I place a phone call using my voice?

1. Say “Call.”
2. Say the name of the contact.

How do I change device settings using my voice?

1. Say “Settings.”
2. Say the name of the setting.

How do I view the owner’s manual on my device?

1. From the home screen, select Apps > Owner’s Manual.

How do I plan a route?

1. From the home screen, select Apps > Route Planner > Create Route.
2. Search for locations.
3. Select Add to Route.

How do I edit and reorder locations in a route?

1. From the home screen, select Apps > Route Planner.
2. Select a route.
3. Select Edit Route.
4. Select an option:
   • To change the order of locations, drag a location to a new position in the list.
   • To remove a location, select the location > Remove.

How do I change routing options for a route?

1. From the home screen, select Apps > Route Planner.
2. Select a route.
3. Select Routing Options.
4. Select a routing mode.

How do I navigate to a saved route?

1. From the home screen, select Apps > Route Planner.
2. Select a route.
3. Select Navigate.

How do I edit and save my active route?

1. From the home screen, select Apps > Route Planner.
2. Select the active route.
3. Select Save.

What are loyalty programs?

Loyalty programs allow you to earn rewards for using participating businesses.

How do I log service history?

You can use the device to track the service history of your vehicle or RV.

How do I add service categories?

1. From the home screen, select Apps > Service History > Categories > Add Category.
2. Enter a name for the category.
3. Select Save.

How do I delete service categories?

1. From the home screen, select Apps > Service History > Categories.
2. Select a category.
3. Select Delete.

How do I rename service categories?

1. From the home screen, select Apps > Service History > Categories.
2. Select a category.
3. Select Rename.
4. Enter a new name for the category.
5. Select Save.

How do I edit a service record?

1. From the home screen, select Apps > Service History.
2. Select a category.
3. Select a service record.
4. Select Edit.
5. Edit the service record information.
6. Select Save.

How do I delete service records?

1. From the home screen, select Apps > Service History.
2. Select a category.
3. Select a service record.
4. Select Delete.

How do I view the weather forecast?

1. From the home screen, select Apps > Weather.

How do I view weather near a different city?

1. From the home screen, select Apps > Weather.
2. Select Change City.
3. Enter the name of the city.

How do I activate a power switch?

1. From the home screen, select Apps > Garmin PowerSwitch.
2. Select the switch you want to activate.

How do I turn off all switches?

From the home screen, select Apps > Garmin PowerSwitch > Turn Off All.

How do I customize a button?

1. From the home screen, select Apps > Garmin PowerSwitch.
2. Select the button you want to customize.
3. Select Edit.
4. Select a switch to assign to the button.

How do I assign a switch to a control input?

1. From the home screen, select Apps > Garmin PowerSwitch.
2. Select the switch you want to assign.
3. Select Assign Input.
4. Select a control input.

How do I add a custom layout?

1. From the home screen, select Apps > Garmin PowerSwitch.
2. Select Menu > Add Layout.
3. Enter a name for the layout.
4. Select OK.
5. Customize the layout.

How do I enable maps?

You can enable or disable specific maps on your device.

How do I connect to a wireless network?

1. From the home screen, select Settings.
2. Select Wi‑Fi.
3. Select the toggle switch to enable Wi‑Fi technology.
4. Select a wireless network from the list.
5. If prompted, enter the network password.

How do I enable Bluetooth Wireless technology?

1. From the home screen, select Settings.
2. Select Bluetooth.
3. Select the toggle switch to enable Bluetooth technology.

What are driver assistance settings?

Driver assistance settings help you customize the driver alerts and other driver assistance features on your device.

What are traffic settings?

Traffic settings allow you to customize how the device displays and uses traffic information.

What are display settings?

Display settings allow you to customize the appearance of the device screen.

What are sound and notification settings?

Sound and notification settings allow you to customize the sounds and notifications produced by the device.

How do I adjust sound and notification volume?

1. From the home screen, select Settings.
2. Select Sound & Notifications > Volume.
3. Adjust the volume sliders.

How do I set an alarm?

1. From the home screen, select Settings.
2. Select Sound & Notifications > Alarm Clock.
3. Select the toggle switch to enable the alarm clock.
4. Select Time to set the alarm time.
5. Select Repeat to set the alarm repeat frequency.

How do I enable or disable location services?

1. From the home screen, select Settings.
2. Select Device > Location Services.
3. Select the toggle switch to enable or disable location services.

How do I set the text language?

1. From the home screen, select Settings.
2. Select Device > Language.
3. Select a language.

What are the date and time settings?

Date and time settings allow you to set the date, time, time zone, and time format for the device.

What are device settings?

Device settings allow you to customize the operation of the device.

How do I restore settings?

You can restore all settings to the factory default values.

How do I view E-label regulatory and compliance information?

1. From the home screen, select Settings.
2. Select Device > About.
3. Select Regulatory Information.

What are the device specifications?

• Operating temperature range: From -20° to 60°C (from -4° to 140°F)
• Battery type: Rechargeable, built-in lithium-ion battery
• Battery life: Up to 1 hour

How do I charge the device?

You can charge the battery using the included vehicle power cable or a compatible USB cable and AC adapter.

What is the Garmin Support Center?

The Garmin Support Center provides online access to user manuals, software updates, and frequently asked questions.

How do I update maps and software using a Wi-Fi network?

1. From the home screen, select Settings.
2. Select Wi‑Fi.
3. Select the toggle switch to enable Wi‑Fi technology.
4. Select a network from the list.
5. If prompted, enter the network password.
6. Select Update Maps & Software.

How do I update maps and software with Garmin Express?

To update the maps and software on your device, you must connect it to a computer using a USB cable.

How do I install Garmin Express?

1. Go to www.garmin.com/express.
2. Select Download for Windows or Download for Mac.
3. Follow the on-screen instructions to install Garmin Express.

How do I clean the outer casing?

Use a cloth dampened with water to clean the outer casing. Avoid using chemical cleaners and solvents that can damage the plastic components.

How do I clean the touchscreen?

Use a soft, lint-free cloth. If necessary, lightly dampen the cloth with isopropyl alcohol. Avoid using glass cleaners and household cleaners.

How do I avoid theft?

• Remove the device from the vehicle and take it with you when you leave your vehicle.
• Remove the suction cup from the windshield when you are not using the device.
• Store the device out of sight when it is not in use.

How do I restart the device?

• To restart the device, press and hold the power key until the device turns off. Then press the power key to turn the device on.

How do I remove the device, mount, and suction cup?

1. Disconnect the vehicle power cable from the mount.
2. Remove the device from the magnetic mount.

How do I remove the mount from the suction cup?

1. Rotate the locking ring on the suction cup counter-clockwise to unlock it.
2. Pull the mount off of the suction cup.

How do I remove the suction cup from the windshield?

1. Pull up on the release tab on the suction cup.
2. Peel the suction cup off the windshield.

What should I do if the suction cup will not stay on my windshield?

• Clean the suction cup and your windshield with alcohol.
• If necessary, purchase a new suction cup mount from www.garmin.com.

What should I do if the mount does not hold my device in place while I drive?

• Make sure the mount is securely attached to the suction cup.
• Tighten the nut on the ball mount.
• Make sure the lever on the suction cup is flipped toward the windshield.

What should I do if my device is not acquiring satellite signals?

• Make sure the device is in a location with a clear view of the sky.
• Make sure the device is not near tall buildings or trees.
• Wait a few minutes for the device to acquire satellite signals.

What should I do if the device does not charge in my vehicle?

• Make sure the vehicle power cable is properly connected to the mount and the vehicle’s power outlet.
• Make sure the vehicle’s power outlet is working.
• Check the fuse in the vehicle power cable.

What should I do if my battery does not stay charged for very long?

• Reduce the screen brightness.
• Disable Bluetooth technology.
• Disable location services.

What should I do if my device does not connect to my phone?

• Make sure your phone is compatible with the device.
• Make sure Bluetooth technology is enabled on both devices.
• Make sure the devices are within 3 m (10 ft.) of each other.
• Restart both devices.

What are mounting considerations for Garmin PowerSwitch?

• Avoid mounting the device where it could be submerged in water.
• The operating temperature range for the device is -20° to 60°C (from -4° to 140°F).
• The device should not be exposed to temperatures exceeding the specified temperature range, such as in direct sunlight.
• Do not mount the device in a location where it could interfere with vehicle safety features, such as airbags or emergency flashers.
• Consider mounting the device in a location where you can easily access it.

How do I mount the device for Garmin PowerSwitch?

1. Select a suitable mounting location.
2. Clean the mounting surface with alcohol.
3. Peel the adhesive backing from the mount.
4. Firmly press the mount onto the mounting surface for 10 to 15 seconds.

How do I open the front cover for Garmin PowerSwitch?

1. Insert a coin into the slot on the bottom of the cover.
2. Twist the coin counter-clockwise until the cover pops open.

How do I connect accessories for Garmin PowerSwitch?

1. Connect the accessory wires to the appropriate terminals on the device.
2. Secure the wires using the included wire ties.

How do I connect a control input for Garmin PowerSwitch?

1. Select a control input method, such as a button or a switch.
2. Connect the control input wires to the appropriate terminals on the device.
3. Secure the wires using the included wire ties.

How do I connect the device to vehicle power for Garmin PowerSwitch?

1. Select a suitable power source, such as the vehicle’s battery or fuse block.
2. Connect the power wires to the appropriate terminals on the device.
3. Secure the wires using the included wire ties.

How do I pair with a Garmin navigation device for Garmin PowerSwitch?

1. Bring the Garmin PowerSwitch device within range of the navigation device.
2. On the navigation device, enable Bluetooth technology.
3. On the navigation device, search for Bluetooth devices.
4. Select Garmin PowerSwitch from the list of available devices.

How do you install the device on the magnetic mount?

1. Place the device onto the magnetic mount.
2. Plug the other end of the vehicle power cable into a power outlet in your vehicle.

What should you avoid when drilling pilot holes and attaching the mount to the vehicle?

Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the mount to the vehicle.

How do you install the Screw-Down Mount on the Dashboard?

Before you can attach the screw-down ball mount to your dashboard, you must select a suitable location on the dashboard.

What should you do to avoid possible damage to your vehicle?

To avoid possible damage to your vehicle, professional installation of the screw-down ball mount is recommended.

How do you attach the screw-down ball mount to the dashboard?

1. Place the mount on the selected location.
2. Using the mount as a template, mark the three screw locations.
3. Drill pilot holes (optional).
   • For some types of mounting material, drilling pilot holes is necessary.
4. Securely fasten the mount to the surface using the supplied screws.

How do you insert the ball mount arm into the mount?

1. Insert the ball mount arm into the mount.
2. Insert the thumbscrew into the mount, and tighten it to secure the ball mount arm.

How do you install the Ball Mount Adapter?

1. Remove the four screws securing the mount socket to the magnetic mount.
2. Remove the mount socket.
3. Secure the one-inch ball mount to the magnetic mount using the screws removed in step 1.

How do you turn the device on or off?

• To turn the device on, press the power key, or connect the device to power.
• To put the device in power saving mode, press the power key while the device is on.
  • While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly for use.
    • You can charge your device faster by putting it in power saving mode while charging the battery.
• To turn off the device completely, hold the power key until a prompt appears on the screen, and select Power off.

How do you acquire GPS Signals?

When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current location. The time required to acquire satellite signals varies based on several factors, including how far you are from the location where you last used your navigation device, whether you have a clear view of the sky, and how long it has been since you last used your navigation device. The first time you turn on your navigation device, it may take several minutes to acquire satellite signals.

How do you acquire satellite signals?

1. Turn on the device.
2. Verify appears in the status bar, and enable location services if it does not.
3. If necessary, go to an open area with a clear view of the sky, away from tall buildings and trees.
   • Acquiring Satellites appears at the top of the navigation map until the device determines your location.

What are the functions of the Home Screen?

• Swipe down to view notifications.
• Swipe down twice to quickly change settings and backlight brightness.
• Select to start a route.
• Select to view the map.
• Select to change your vehicle profile.
• Select to view smart notifications.
  • The Garmin Drive™ app is required.
• Select to open the app drawer.
  • The app drawer contains shortcuts to all the apps installed on your device.
• Hold to customize the wallpaper or add widgets to the home screen.

How do you open an app?

The home screen contains shortcuts for frequently used apps. The app drawer contains all the apps installed on your device, organized into two tabs. The Navigation tab contains Garmin apps useful for navigation, dispatching, and hours of service recording. The Tools tab contains apps useful for communication and other tasks.

Select an option to open an app:

• Select an app shortcut from the home screen.
• Select , select a tab, and select an app.

How do you add Shortcuts to the Home Screen?

1. Select .
2. Select an app tab to view additional applications.
3. Hold an application, and drag it to a location on the home screen.

How do you view notifications?

WARNING
Do not read or interact with notifications while driving, because doing so can cause distraction that could lead to an accident resulting in serious personal injury or death.

1. Swipe down from the top of the screen.
   • The list of notifications appears.
2. Select an option:
   • To launch the action or app mentioned in the notification, select the notification.
   • To dismiss a notification, swipe the notification to the right.

What do the Status Bar Icons represent?

The status bar is located at the top of the main menu. The status bar icons display information about features on the device.

• Location services is enabled.
• Bluetooth® technology is enabled.
• Connected to a Bluetooth device.
• Connected to a Wi‑Fi® network.
• Active vehicle profile.
  • Swipe down twice and select to view the vehicle profile settings.
• Battery charge level.

How do you use the Touchscreen?

• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.

How do you adjust the Screen Brightness?

You can adjust the brightness manually, using either the notification panel or the settings menu.

1. Select an option:
   • Swipe down twice from the top of the screen to expand the quick settings in the notification panel.
   • Select Settings > Device > Display > Brightness level.
2. Use the slider bar to adjust the brightness.

What are Vehicle Profiles?

WARNING
Entering your vehicle profile characteristics does not guarantee that your vehicle’s characteristics will be accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may exist in the map data such that your device cannot account for these restrictions or road conditions in all cases. Always defer to all posted road signs and road conditions when making driving decisions.

Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is indicated by an icon in the status bar. The navigation and map settings on your device can be customized separately for each vehicle type. When you activate a camper vehicle profile, the device avoids including restricted or impassable areas in routes based on the dimensions, weight, and other characteristics you entered for your vehicle.

How do you add a Vehicle Profile?

You should add a vehicle profile for each camper to be used with your device.

1. Select the vehicle profile from the homescreen.
2. Select your vehicle type:
   • To add a motorhome with a permanently attached camper, select Motorhome.
   • To add a motorhome pulling a trailer, select Motorhome with Trailer.
   • To add a camper pulled behind a passenger vehicle, select Vehicle with Trailer.
3. If necessary, select your trailer type:
   • To add a camper pulled using a standard hitch, select Travel Trailer.
   • To add a camper pulled using a fifth-wheel hitch, select Fifth Wheel.
     • NOTE: This trailer type is not available in all areas.
   • To add a boat trailer pulled using a standard hitch, select Boat Trailer.
   • To add a trailer pulled using a standard hitch, select Trailer.
4. Follow the on-screen instructions to enter the vehicle characteristics.
   • After you add a vehicle profile, you can edit the profile to enter additional detailed information.

What is a Car Profile?

The car profile is a preloaded vehicle profile intended for use in an automobile without a trailer. While using the car profile, the device calculates standard automobile routes, and routing for large vehicles is not available. Some features and settings specific to large vehicles are not available while using the car profile.

How do you switch the Vehicle Profile?

Each time you turn on your device, it prompts you to select a vehicle profile. You can manually switch to another vehicle profile at any time.

1. Select an option:
   • Swipe down twice from the top of the screen, and select the vehicle profile icon, such as or .
   • From the home screen, select the vehicle profile widget.
2. Select a vehicle profile.
   • The vehicle profile information appears, including measurements and weight.
3. Select Select.

How do you add Propane Tanks?

NOTE: This feature is not available on all product models.

When you add your propane tanks to your vehicle profile, the device avoids routing through areas with propane tank restrictions that may affect your route. The device also alerts you when you approach areas that require you to shut off your propane tanks.

1. From the vehicle profile, select > Add Tank.
2. Enter the weight of the propane tank, and select Save.

How do you edit a Vehicle Profile?

You can change basic vehicle profile information or add detailed information to a vehicle profile, such as maximum speed.

1. Select > Navigation > Vehicle Profile.
2. Select the vehicle profile to edit.
3. Select an option:
   • To edit the vehicle profile information, select , and select a field to edit.
   • To rename the vehicle profile, select > > Rename Profile.
   • To delete the vehicle profile, select > > Delete.

What are the Driver Awareness Features and Alerts?

CAUTION
The driver alerts and speed limit features are for information only and do not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin is not responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs.

Your device provides features that can help encourage safer driving and increase efficiency, even when you are driving in a familiar area. The device plays an audible tone or message and displays information for each alert. You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all areas.

• Schools: The device plays a tone and displays the speed limit (if available) for an upcoming school or school zone.
• Speed limit exceeded: The device displays a red border on the speed limit icon when you exceed the posted speed limit for the current road.
• Speed limit reduced: The device plays a tone and displays the upcoming speed limit so you can be prepared to adjust your speed.
• Railroad crossing: The device plays a tone to indicate an upcoming railroad crossing.
• Animal crossing: The device plays a tone to indicate an upcoming animal crossing area.
• Curves: The device plays a tone to indicate a bend in the road.
• Slower traffic: The device plays a tone to indicate slower traffic when you approach slower traffic at a higher speed.
  • Your device must be receiving traffic information to use this feature.
• Construction zone: The device plays a tone and displays a message when you approach a construction zone.
• Lane closure: The device plays a tone and displays a message when you approach a lane closure.
• Break planning: The device plays a tone and suggests upcoming rest stops after you have been driving for a long time.
• Risk of grounding: The device plays a tone and displays a message when you approach a road where your vehicle could become grounded.
• Lateral wind: The device plays a tone and displays a message when you approach a road where there is risk of lateral wind.
• Narrow road: The device plays a tone and displays a message when you approach a road that may be too narrow for your vehicle.
• Steep hill: The device plays a tone and displays a message when you approach a steep hill.
• State and country borders: The device plays a tone and displays a message when you approach the border of a state or country.
• Shut off propane: The device plays a tone and displays a message when you approach an area where propane should be turned off.

How do you enable or disable Driver Alerts?

You can enable or disable several types of driver alerts.

1. Select Settings > Driver Assistance > Driver Alerts.
2. Select or clear the check box next to each alert.

What are Red Light and Speed Cameras?

NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera database.

NOTE: This feature is not available for all regions or product models.

Information about red light and speed camera locations is available in some areas for some product models. The device alerts you when you approach a reported speed or red light camera.

• In some areas, your device can receive red light and speed camera data while connected to a smartphone running the Garmin Drive app.
• You can use the Garmin Express™ software (garmin.com/express) to update the camera database stored on your device. You should update your device frequently to receive the most up-to-date camera information.

What is the purpose of Navigating to your destination?

A route is a path from your current location to one or more destinations.

• The device calculates a recommended route to your destination based on the preferences you set, including the route calculation mode and avoidances.
• The device can automatically avoid roads that are not appropriate for the active vehicle profile.
• You can start navigating to your destination quickly using the recommended route, or you can select an alternate route.
• If there are specific roads you need to use or avoid, you can customize the route.
• You can add multiple destinations to a route.

What is a Route Planner?

You can use the route planner to create and save a route, which you can navigate later. This can be useful for planning a delivery route, a vacation, or a road trip. You can edit a saved route to further customize it, including reordering locations, adding suggested attractions, and adding shaping points. You can also use the route planner to edit and save your active route.

How do you edit and save your active route?

If a route is active, you can use the route planner to edit and save it.

1. Select > Route Planner > My Active Route.
2. Edit your route using any of the route planner features. The route recalculates each time you make a change.
3. Select Save to save your route, which you can navigate again later (optional).

How do you start a route?

1. Select Where To?, and search for a location.
2. Select a location.
3. Select an option:
   • To start navigating using the recommended route, select Go!.
   • To edit the course of the route, select > , and add shaping points to the route. The device calculates a route to the location and guides you using voice prompts and information on the map. A preview of the major roads in your route appears at the edge of the map for several seconds. If you need to stop at additional destinations, you can add the locations to your route.

How do you start a route using the Road Trip Routes feature?

Your device can calculate routes that prefer curvy roads, hills, and fewer highways. This feature can provide a more enjoyable drive, but it may increase the time or distance to your destination.

1. Select Where To? > Categories.
2. If necessary, select a subcategory.
3. Select a location.
4. Select .
5. Use the slider to increase or decrease the length of your route.
6. If necessary, select to add shaping points to your route.
7. Select Go!.

How do you start a route by using the map?

You can start a route by selecting a location from the map.

1. Select View Map.
2. Drag and zoom the map to display the area to search.
3. Select a point, such as a street, intersection, or address location.
4. Select Go!.

How do you go home using the device?

The first time you start a route home, the device prompts you to enter your home location.

1. Select Where To? > Go Home.
2. If necessary, enter your home location.

How do you edit your home location?

1. Select Where To? > > Set Home Location.
2. Enter your home location.

How is the route displayed on the map?

As you travel, the device guides you to your destination using voice prompts and information on the map. Instructions for your next turn or exit, or other actions appear across the top of the map.

• Distance to the next action.
• Next action in the route. Indicates the next turn, exit, or other action and the lane in which you should travel, if available.
• Name of the street or exit associated with the next action.
• Route highlighted on the map.
• Next action in the route. Arrows on the map indicate the location of upcoming actions.
• Map tool shortcuts.
• Map tools. You can select the tools to show you more information about your route and surroundings.
• Data fields. TIP: You can touch these fields to change the information they show.
• Vehicle speed.

What is Active Lane Guidance?

As you approach some turns, exits, or interchanges in your route, a detailed simulation of the road appears beside the map, if available. A colored line indicates the proper lane for the turn.

How do you view turns and directions while navigating a route?

1. From the map, select an option:
   • To view upcoming turns and directions as you navigate, select > Turns. The map tool displays the next several turns or directions beside the map. The list updates automatically as you navigate the route.
   • To view the complete list of turns and directions for the entire route, select the text bar at the top of the map.
2. Select a turn or direction (optional). Detailed information appears. An image of the junction may appear for junctions on major roadways, if available.

How do you view the entire route on the map?

1. While navigating a route, select anywhere on the map.
2. Select .

What happens when you arrive at your destination?

When you approach your destination, the device provides information to help you complete your route.

• indicates the location of your destination on the map, and a voice prompt announces you are approaching your destination.
• When you stop at your destination, the device automatically ends the route. If the device does not detect your arrival automatically, you can select Stop to end your route.

How do you add a location to your route?

Before you can add a location to your route, you must be navigating a route. You can add locations to the middle or end of your route. For example, you can add a fuel station as the next destination in your route.

TIP: To create complex routes with multiple destinations or scheduled stops, you can use the trip planner to plan, schedule, and save a trip.

1. From the map, select > Where To?.
2. Search for a location.
3. Select a location.
4. Select Go!.
5. Select an option:
   • To add the location as the next destination in your route, select Add As Next Stop.
   • To add the location to the end of your route, select Add As Last Stop.
   • To add the location and edit the order of destinations in your route, select Add to Active Route. The device re-calculates the route to include the added location and guides you to the destinations in order.

How do you shape your route?

Before you can shape your route, you must start a route. You can manually shape your route to change its course. This allows you to direct the route to use a certain road or go through a certain area without adding a destination to the route.

1. Touch anywhere on the map.
2. Select Shape Route. TIP: You can select to zoom in on the map and select a more precise location.

The device enters route shaping mode and recalculates the route to travel through the selected location.

3. Select Go!.
4. If necessary, select an option:
   • To add more shaping points to the route, select additional locations on the map.
   • To remove a shaping point, select the shaping point and select Remove.

How do you take a detour?

You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.

1. From the map, select > Edit Route.
2. Select an option:
   • To detour your route for a specific distance, select Detour by Distance.
   • To detour around a specific road on the route, select Detour by Road.

How do you change the route calculation mode?

1. Select Settings > Navigation > Calculation Mode.
2. Select an option:
   • Select Shorter Distance to calculate routes that are shorter in distance but can take more time to drive.

How do you stop the route?

• From the map, select > Stop.
• From the home screen, select Stop.

How do you use suggested routes?

Before you can use this feature, you must save at least one location and enable the travel history feature. Using the myTrends™ feature, your device predicts your destination based on your travel history, the day of the week, and the time of day. After you have driven to a saved location several times, the location may appear in the navigation bar on the map, along with the estimated time of travel, and traffic information. Select the navigation bar to view a suggested route to the location.

How do you avoid traffic delays on your route?

Before you can avoid traffic delays, you must be receiving traffic information. By default, the device optimizes your route to avoid traffic delays automatically. If you have disabled this option in the traffic settings, you can view and avoid traffic delays manually.

1. While navigating a route, select > Traffic.
2. Select Alternate Route, if available.
3. Select Go!.

How do you avoid toll roads?

Your device can avoid routing you through areas that require tolls, such as toll roads, toll bridges, or congestion areas. The device may still include a toll area in your route if no other reasonable routes are available.

1. Select Settings > Navigation > Avoidances > Toll Roads.
2. Select Save.

How do you avoid toll stickers?

If the map data on your device contains detailed toll sticker information, you can avoid or allow roads that require toll stickers for each country.

NOTE: This feature is not available in all areas.

1. Select Settings > Navigation > Toll Stickers.
2. Select a country.
3. Select an option:
   • To be asked each time before routing through an area that requires toll stickers, select Always Ask.
   • To always avoid roads that require toll stickers, select Avoid.
   • To always allow roads that require toll stickers, select Allow.

How do you avoid road features?

1. Select Settings > Navigation > Avoidances.
2. Select the road features to avoid on your routes, and select OK.

How do you avoid environmental zones?

Your device can avoid areas with environmental or emissions restrictions that may apply to your vehicle. This option applies to the vehicle type in the active vehicle profile.

1. Select Settings > Navigation > Environmental Zones.
2. Select an option:
   • To be asked each time before routing through an environmental zone, select Always Ask.
   • To always avoid environmental zones, select Avoid.
   • To always allow environmental zones, select Allow.

What are Custom Avoidances?

Custom avoidances allow you to select specific areas or sections of road to avoid. When the device calculates a route, it avoids these areas and roads unless no other reasonable route is available.

How do you avoid a road?

1. Select Settings > Navigation > Custom Avoidances.
2. If necessary, select Add Avoidance.
3. Select Add Avoid Road.
4. Select the starting point of the section of road to avoid, and select Next.
5. Select the ending point of the road section, and select Next.
6. Select Done.

How do you avoid an area?

1. Select Settings > Navigation > Custom Avoidances.
2. If necessary, select Add Avoidance.
3. Select Add Avoid Area.
4. Select the upper-left corner of the area to avoid, and select Next.
5. Select the lower-right corner of the area to avoid, and select Next. The selected area is shaded on the map.
6. Select Done.

How do you disable a custom avoidance?

You can disable a custom avoidance without deleting it.

1. Select Settings > Navigation > Custom Avoidances.
2. Select an avoidance.
3. Select > Disable.

How do you delete custom avoidances?

1. Select Settings > Navigation > Custom Avoidances > .
2. Select an option:
   • To delete all custom avoidances, select Select All > Delete.
   • To delete one custom avoidance, select the avoidance, and select Delete.

How do you find and save locations?

The maps loaded in your device contain locations, such as restaurants, hotels, auto services, and detailed street information. The Where To? menu helps you find your destination by providing several methods to browse, search, and save this information. From the main menu, select Where To?.

• To quickly search all locations on your device, select Search.
• To find an address, select Address.
• To browse or search pre-loaded points of interest by category, select Categories.
• To search near a different city or area, select next to the current search area.
• To view and edit your saved locations, select Saved.
• To view locations you have recently selected from the search results, select Recent.
• To search for RV parks and campgrounds, select Campgrounds.
• To browse and search Foursquare® points of interest, select Foursquare.
• To browse and search Tripadvisor® traveler ratings, select Tripadvisor.
• To navigate to specific geographic coordinates, select Coordinates.

How do you find campgrounds?

NOTICE: You are responsible for understanding and complying with any applicable rules, laws, or regulations associated with campgrounds.

Select Where To? > Campgrounds.

How do you find campgrounds with amenities?

You can search for RV parks and campgrounds based on the amenities available.

1. Select Where To?.
2. Select an RV parks and campgrounds search provider, such as ACSI, Campercontact, or KOA.
3. If necessary, select a category.
4. Select Search Filters, select one or more amenities, and select Save.
5. Select a location.

How do you find RV services?

NOTE: This feature is not available in all areas.

You can find nearby locations that offer repair, towing, and other services for RVs. Select Where To? > PlanRV Services.

How do you find a location using the search bar?

You can use the search bar to search for locations by entering a category, brand name, address, or city name.

1. Select Where To?.
2. Select Search in the search bar.
3. Enter all or part of the search term. Suggested search terms appear below the search bar.
4. Select an option:
   • To search for a type of business, enter a category name (for example, “movie theaters”).
   • To search for a business name, enter all or part of the name.
   • To search for an address near you, enter the house number and street name.
   • To search for an address in another city, enter the house number, street name, city, and state.
   • To search for a city, enter the city and state.
   • To search for coordinates, enter latitude and longitude coordinates.
5. Select an option:
   • To search using a suggested search term, select the term.
   • To search using the text you entered, select .
6. If necessary, select a location.

What are Trendy Places?

NOTICE: Garmin is not responsible for the accuracy or timeliness of the Tripadvisor or Michelin® information. You are responsible for understanding and complying with any applicable rules, laws, or regulations associated with points of interest. The Trendy Places search feature includes both Tripadvisor and Michelin points of interest and ratings, providing a comprehensive list of attractions. You can filter the search results by categories, ratings, and distance from the route.

How do you perform a Trendy Places Search?

1. Select Trendy Places.
2. Select Search Filters to filter the displayed points of interest by category or rating (optional).
3. Select , and enter a search term (optional).

How do you find an address?

NOTE: The order of the steps may change depending on the map data loaded on your device.

1. Select Where To?.
2. If necessary, select to search near a different city or area.
3. Select Address.
4. Follow the on-screen instructions to enter address information.
5. Select the address.

How do you find a location by category?

1. Select Where To?.
2. Select a category, or select Categories.
3. If necessary, select a subcategory.
4. Select a location.

How do you search within a category?

After you have performed a search for a point of interest, certain categories may display a Quick Search list that shows the last four destinations you selected.

1. Select Where To? > Categories.
2. Select a category.
3. Select an option:
   • Select a destination from the quick search list on the right side of the screen. The quick search list provides a list of recently found locations in the selected category.
   • Select a subcategory, if necessary, and select a destination.

What are the Location Search Results?

The location search results appear in a list, with the nearest location at the top. Each numbered location also appears on the map. You can scroll down to view more results.

• Plan Arrival Select to use the Plan Arrival tool.
• Select to view detailed information about the location.
• Select to create a route to the location using the feature.
• Go! Select to start navigating to the location using the recommended route.

How do you change the search area?

By default, the device searches for locations near your current location. You can also search other areas, such as near your destination, near another city, or along your active route.

1. Select Where To?.
2. Select next to the current search area .
3. Select a search area.
4. If necessary, follow the on-screen instructions to select a specific location.

The selected search area appears next to . When you search for a location using any of the options in the Where To? menu, the device suggests locations near this area first.

What are Custom Points of Interest?

Custom POIs are customized points on the map. They can contain alerts that let you know if you are near a designated point or if you are traveling faster than a specified speed.

How do you install POI Loader?

You can create or download custom POI lists on your computer and install them on your device using POI Loader software.

1. Go to http://www.garmin.com/poiloader.
2. Follow the on-screen instructions.

How do you find custom POIs?

Before you can find custom POIs, you must load custom POIs on your device using the POI Loader software.

1. Select Where To? > Categories.
2. Scroll to the Other Categories section, and select a category.

What are Search Tools?

Search tools allow you to search for specific types of locations by responding to on-screen prompts.

How do you find an intersection?

You can search for an intersection or junction between two streets, highways, or other roads.

1. Select Where To? > Intersections.
2. Follow the on-screen instructions to enter street information.
3. Select the intersection.

How do you find a location using coordinates?

You can find a location using latitude and longitude coordinates.

1. Select Where To? > Coordinates.

2. If necessary, select , and change the coordinate format or datum.

3. Select Coordinates.

4. Enter the latitude and longitude coordinates, and select Done.

5. Select an option:

   • To save the coordinates as a location, select Save.
   • To start a route to the coordinates, select Go!.

How do you search for Foursquare points of interest loaded on your device?

Select Where To? > Foursquare.

How do you view Foursquare location details?

You can view Foursquare location information and user ratings.

1. From the location search results, select a Foursquare point of interest.
2. Select .

How do you find Tripadvisor Points of Interest?

1. Select Where To? > Tripadvisor.
2. Select a category.
3. If necessary, select a subcategory. A list of nearby Tripadvisor points of interest for the category appears.
4. Select Sort Results to filter the displayed points of interest by distance or popularity (optional).
5. Select , and enter a search term (optional).

How do you view recently found locations?

Select Where To? > Recent.

How do you clear the list of recently found locations?

Select Where To? > Recent > > Clear > Yes.

How do you view current location information?

You can use the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location.

From the map, select the vehicle.

How do you find emergency services and fuel?

You can use the Where Am I? page to find the nearest hospitals, police stations, and fuel stations.

1. From the map, select the vehicle.
2. Select Hospitals, Police Stations, Truck Stops, or Fuel. NOTE: Some service categories are not available in all areas. A list of locations for the selected service appears, with the nearest locations at the top.
3. Select a location.
4. Select an option:
   • To navigate to the location, select Go!.
   • To view the phone number and other location details, select .

How do you get directions to your current location?

If you need to tell another person how to get to your current location, your device can give you a list of directions.

1. From the map, select the vehicle.
2. Select > Directions to Me.
3. Select a starting location.
4. Select Select.

How do you add a shortcut?

You can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool. The Where To? menu can contain up to 36 shortcut icons.

1. Select Where To? > Add Shortcut.
2. Select an item.

How do you remove a shortcut?

1. Select Where To? > > Remove Shortcut(s).
2. Select a shortcut to remove.
3. Select the shortcut again to confirm.
4. Select Done.

How do you save a location?

1. Search for a location.
2. From the search results, select a location.
3. Select > Save.
4. If necessary, enter a name, and select Done.
5. Select Save.

How do you save your current location?

1. From the map, select the vehicle icon.
2. Select Save.
3. Enter a name, and select Done.

How do you edit a saved location?

1. Select Where To? > Saved.
2. If necessary, select a category.
3. Select a location.
4. Select .
5. Select > Edit.
6. Select an option:
   • Select Name.
   • Select Phone Number.
   • Select Categories to assign categories to the saved location.
   • Select Map Symbol to change the symbol used to mark the saved location on a map.
7. Edit the information.
8. Select Done.

How do you assign categories to a saved location?

You can add custom categories to organize your saved locations. NOTE: Categories appear in the saved locations menu after you have saved at least 12 locations.

1. Select Where To? > Saved.
2. Select a location.
3. Select .
4. Select > Edit > Categories.
5. Enter one or more category names, separated by commas.
6. If necessary, select a suggested category.
7. Select Done.

How do you delete a saved location?

NOTE: Deleted locations cannot be recovered.

1. Select Where To? > Saved.
2. Select > Delete.
3. Select the box next to the saved locations to delete, and select Delete > Yes.

How do you use the map to navigate a route or to view a map of your surroundings when no route is active?

1. Select View Map.
2. Touch anywhere on the map.
3. Select an option:
   • Drag the map to pan left, right, up, or down.
   • To add or remove map layers such as topographic and BirdsEye imagery, select .
   • To zoom in or out, select or .
   • To switch between North Up, 2-D, and 3-D views, select .
   • To open the route planner, select .
   • To start a route, select a location on the map, and select Go!.

What are Map Tools?

Map tools provide quick access to information and device functions while you view the map. When you activate a map tool, it appears in a panel at the edge of the map.

Map Tool	Function
Stop	Stops navigation of the active route.
Edit Route	Allows you to take a detour or skip locations in your route.
Mute Navigation	Mutes the device audio.
Cities Ahead	Displays upcoming cities and services along your active route or along a highway.
Up Ahead	Displays upcoming locations along the route or the road on which you are traveling.
Elevation	Displays upcoming elevation changes.
Traffic	Displays traffic conditions along your route or in your area. This feature is not available in all areas or for all device models.
Trip Data	Displays customizable trip data, such as speed or mileage.
Turns	Displays a list of upcoming turns in your route.
Phone	Displays a list of recent phone calls from your connected phone, and displays in-call options while a phone call is active.
Weather	Displays weather conditions for your area.
Music Controls	Displays media controls and media information.
Smart	Notifications Displays recent smart notifications from your connected phone.
Plan Arrival	Displays a map of your destination and allows you to find a truck destination.
Pilot Flying J	Displays upcoming Pilot Flying J Travel Centers™ along your route.
	NOTE: This feature is available only in North America.
Overview Map	Displays an overview of your route on the map.

How do you view a map tool?

1. From the map, select .
2. Select a map tool. The map tool appears in a panel at the edge of the map.
3. When you are done using the map tool, select .

What is the Up Ahead tool?

The Up Ahead tool provides information about upcoming locations along your route or the road on which you are traveling. You can view upcoming points of interest by category, such as restaurants, fuel stations, or rest areas. You can customize the categories that show in the Up Ahead tool.

How do you view upcoming locations?

1. From the map, select > Up Ahead. While you are traveling, the map tool shows the next location along your road or route.
2. Select an option:
   • If the map tool shows categories, select a category to view a list of nearby locations in that category.
   • If the map tool shows upcoming locations, select a location to view location details or start a route to the location.

How do you customize the Up Ahead categories?

You can change the location categories that appear in the Up Ahead tool.

1. From the map, select > Up Ahead.
2. Select a category.
3. Select .
4. Select an option:
   • To move a category up or down in the list, select and drag the arrow next to the category name.
   • To change a category, select the category.
   • To create a custom category, select a category, select Custom Search, and enter the name of a business or category.
5. Select Save.

How do you plan your arrival?

Before you start a route, you can plan to arrive at a popular truck destination, such as a loading dock or truck parking, at the end of your route. You can also add your own destinations to the map.

1. Select Where To?, and search for a location.
2. Select a location.
3. Select Plan Arrival. A preview of your destination appears on the map. Popular truck destinations appear next to the map. If your RV / Camper device is paired with the Garmin Drive app, it downloads BirdsEye satellite imagery automatically.
4. Select a destination, and select Go!.

What is the Cities Ahead tool?

While you are traveling on a highway or navigating a route that includes a highway, the Cities Ahead tool provides information about upcoming cities along the highway. For each city, the map tool shows the distance to the highway exit and the services available, similar to the information on highway road signs.

How do you view upcoming cities and exit services?

1. From the map, select > Cities Ahead. While you are traveling along a highway or an active route, the map tool shows information about upcoming cities and exits.
2. Select a city. The device shows a list of points of interest located at the selected city exit, such as fuel stations, lodging, or restaurants.
3. Select a location, and select Go! to start navigating.

What are the Warning and Alert Symbols?

WARNING Entering your vehicle profile characteristics does not guarantee that your vehicle’s characteristics will be accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may exist in the map data such that your device cannot account for these restrictions or road conditions in all cases. Always defer to all posted road signs and road conditions when making driving decisions.

Warning and alert symbols may appear on the map or in route directions to alert you to potential hazards and road conditions.

What are Restriction Warnings?

• Height
• Weight
• Length
• Width
• Trailer height
• Trailer weight
• Trailer length
• Trailer width
• No boat trailers allowed
• No campers allowed
• No trailers allowed
• No propane
• No left turn
• No right turn
• No U turn

What are Road Condition Warnings?

• Risk of grounding
• Lateral wind
• Narrow road
• Sharp curve
• Steep down hill
• Tree overhang

What are Alerts?

• Weigh station
• Road not verified for motorhomes

How do you view trip data from the map?

From the map, select > Trip Data.

How do you view customized trip information on the map?

You can use the trip data map tool to show customized trip information on the map.

1. From the map, select > Trip Data.
2. Select an option:
   • Select a data field in the trip data tool, and select the information to show in the field.
   • Select the customizable map data field, and select the information to show in the field.

How do you reset trip information?

1. From the map, select .
2. Select a trip information data field.
3. Select > Reset Field(s).
4. Select an option:
   • When not navigating a route, select Select All to reset every data field except the speedometer, on the first page.
   • Select Reset Overall Data to reset Trip A and total data.
   • Select Reset Max. Speed to reset the maximum speed.
   • Select Reset Trip B to reset the odometer.

How do you view upcoming traffic?

Before you can use this feature, your device must be receiving traffic data. You can view traffic incidents coming up along your route or along the road on which you are traveling.

1. While navigating a route, select > Traffic. The nearest upcoming traffic incident appears in a panel on the right side of the map.
2. Select the traffic incident to view additional details.

How do you view traffic on the map?

The traffic map shows color-coded traffic flow and delays on nearby roads.

1. From the main menu, select > Navigation > Traffic.
2. If necessary, select > Legend to view the legend for the traffic map.

How do you search for traffic incidents?

1. From the main menu, select > Navigation > Traffic.
2. Select > Incidents.
3. Select an item in the list.
4. If there is more than one incident, use the arrows to view additional incidents.

How do you customize the map layers?

You can customize which data appear on the map, such as icons for points of interest and road conditions.

1. Select Settings > Map Display > Map Layers.
2. Select the layers to include on the map, and select Save.

How do you change the map data field?

1. From the map, select a data field. NOTE: You cannot customize .
2. Select a type of data to display.

How do you change the map perspective?

1. Select Settings > Map Display > Driving Map View.
2. Select an option:
   • Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top.
   • Select North Up to display the map in 2-D with north at the top.
   • Select 3-D to display the map in three dimensions.
3. Select Save.

What are Live Services, Traffic, and Smartphone Features?

WARNING Do not read or interact with notifications while driving, because doing so can cause distraction that could lead to an accident resulting in serious personal injury or death.

The Garmin Drive app allows your device to receive smart notifications and live information, such as live traffic data and weather information.

• Live traffic data: Sends real-time traffic data to your device, such as traffic incidents and delays, construction zones, and road closings.
• Weather information: Sends real-time weather forecasts, road conditions, and weather radar to your device.
• Smart Notifications: Displays phone notifications and messages on your device. This feature is not available for all languages.
• Hands-Free calling: Allows you to place and receive phone calls using your device, and allows you to use the device as a hands-free speaker phone. If the selected language supports the voice command feature, you can place calls using voice commands.
• Send locations to device: Allows you to send locations from your smartphone to your navigation device.

How do you pair with your smartphone?

You can pair your RV / Camper device with your smartphone and the Garmin Drive app to enable additional features and access live information.

1. From the app store on your smartphone, install the Garmin Drive app.
2. Turn on your RV / Camper device, and place the device and your smartphone within 3 m (10 ft.) of each other.
3. On your phone, open the Garmin Drive app.
4. Follow the on-screen instructions to sign in to a Garmin account and complete the pairing and setup process. The main app dashboard appears. After the devices are paired, they connect automatically when they are turned on and within range.

What are some tips after pairing the devices?

• After the initial pairing, the two devices can connect automatically each time you turn them on.
• When you turn on the device, it tries to connect to the last phone to which it was connected.
• You might need to set your phone to connect to the device automatically when the device is turned on.
• You should verify the Bluetooth features you want to use are enabled.

How do you go to an address or location using the Garmin Drive App?

You can use the Garmin Drive app to search for an address, business, or point of interest, and send it to your RV / Camper device for navigation.

1. From the Garmin Drive app, select Where To?.
2. Select an option:
   • To search for an address near you, enter the house number and street name.
   • To search for an address in another city, enter the house number, street name, city, and state.
   • To search for a business name, enter all or part of the name.
   • To search for a city, enter the city and state.
   • As you type, suggestions appear below the search field.
3. Select a suggested search result. The app displays the location on a map.
4. Select Go! to start a route. The RV / Camper device starts navigating to the selected location, and the location is added to your recent searches in the Where To? menu.

What are smart notifications?

While your device is connected to the Garmin Drive app, you can view notifications from your smartphone on your RV / Camper device, such as text messages, incoming calls, and calendar appointments.

What is an important warning about smart notifications?

Do not read or interact with notifications while driving, because doing so can cause distraction that could lead to an accident resulting in serious personal injury or death.

What do you need to do before you can use the smart notification feature?

Before you can use this feature, your device must be connected to a supported phone running the Garmin Drive app.

What happens when the device receives a notification from your smartphone?

From most pages, a popup appears when the device receives a notification from your smartphone. If the device is moving, you must verify you are a passenger and not the driver before you can view notifications.

Where do notifications appear if you are viewing the map?

If you are viewing the map, notifications appear in a map tool.

How do you ignore a notification?

To ignore a notification, select OK. The popup closes, but the notification remains active on your phone.

How do you view a notification?

To view a notification, select View.

How do you listen to the notification?

To listen to the notification, select View > Play. The device reads the notification using text-to-speech technology. This feature is not available for all languages.

How do you perform additional actions, such as dismissing the notification from your phone?

To perform additional actions, such as dismissing the notification from your phone, select View, and select an option. Additional actions are available for only some notification types and must be supported by the app generating the notification.

What is hands-free calling?

Using Bluetooth wireless technology, your device can connect to your compatible mobile phone and wireless headset or helmet to become a hands-free device.

What should be noted about hands-free calling?

While most phones and headsets are supported and can be used, a particular phone or headset cannot be guaranteed to be compatible. All features may not be available for your phone.

How do you check compatibility for hands-free calling?

To check compatibility, go to http://www.garmin.com/bluetooth.

How do you place a call?

1. Select > Tools > Phone.
2. Select an option:
   • To dial a number, select , enter the phone number, and select .
   • To view numbers of recent, missed, or recently dialed or received calls, select , select a log, and select a number to dial it.
   • To call a contact from your phone book, select , and select a contact.

How do you receive a call?

When you receive a call, select Answer or Dismiss.

What are in-call options?

In-call options are available when you answer a call. Some options may not be compatible with your phone.

How do you open the in-call options page if you have closed it?

If you close the in-call options page, you can open it again by selecting from any screen.

How do you set up a conference call?

To set up a conference call, select Add Call.

How do you transfer audio to your phone?

To transfer audio to your phone, select Call in Progress on Navigator.

What is the Call in Progress on Navigator feature useful for?

You can use this feature if you want to disconnect the Bluetooth connection and remain on the call, or if you need privacy.

How do you use the dial pad?

To use the dial pad, select Keypad.

What is the Keypad feature useful for?

You can use this feature to use automated systems, such as voice mail.

How do you mute the microphone?

To mute the microphone, select Mute.

How do you hang up?

To hang up, select End Call.

How do you save a phone number as a preset?

You can save up to three contacts as presets on the dial pad. This allows you to quickly call your home phone number, family members, or frequently called contacts.

1. Select > Tools > Phone.
2. If necessary, select .
3. Select a preset number, such as Preset 1.
4. Select OK, then select a contact.

How do you enable or disable Bluetooth features?

You can enable or disable Bluetooth features such as phone calls, media audio, and live services for your paired smartphone.

1. Select Settings > Wireless Networks > Bluetooth.
2. Select your phone name.
3. Select a feature to enable or disable it.

How do you show or hide app notifications for Android™?

You can use the Garmin Drive app to customize which types of smartphone notifications appear on your RV / Camper device.

1. On your phone, open the Garmin Drive app.
2. Select > Smart Notifications.
3. A list of smartphone app categories appears.
4. Select a category to enable or disable notifications for that type of app.

How do you show or hide notification categories for your Apple® device?

If you are connected to an Apple device, you can filter the notifications shown on your RV / Camper device by showing or hiding categories.

1. Select > Tools > Smart Notifications > .
2. Select the check box next to each notification to show.

How do you disconnect a Bluetooth device?

You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The Bluetooth device can connect to your RV / Camper device automatically in the future.

1. Select Settings > Wireless Networks > Bluetooth.
2. Select the device to disconnect.
3. Select OK.

How do you delete a paired Bluetooth device?

You can delete a paired Bluetooth device to prevent it from automatically connecting to your RV / Camper device in the future. Deleting a paired smartphone also deletes all synced phonebook contacts and call history from your RV / Camper device.

1. Select Settings > Wireless Networks > Bluetooth.
2. Next to the Bluetooth device name, select > Forget.

What is Garmin’s stance on traffic information accuracy and timeliness?

Garmin is not responsible for the accuracy or timeliness of the traffic information.

How does your device provide traffic information?

Your device can provide information about traffic on the road ahead or on your route. You can set your device to avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on your active route. The traffic map allows you to browse the map for traffic delays in your area. To provide traffic information, your device must be receiving traffic data.

How can your device receive traffic data?

All product models can receive subscription-free traffic data using the Garmin Drive app. Traffic data is not available in all areas.

Where can you find information about traffic coverage areas?

For information about traffic coverage areas, go to garmin.com/traffic.

How can your device receive subscription-free traffic data?

Your device can receive subscription-free traffic data while connected to a smartphone running the Garmin Drive app.

1. Connect your device to the Garmin Drive app.
2. On your RV / Camper device, select Settings > Traffic > Traffic, and verify the Garmin Live Traffic option is selected.

How do you view traffic on the map?

The traffic map shows color-coded traffic flow and delays on nearby roads.

1. From the main menu, select > Navigation > Traffic.
2. If necessary, select > Legend to view the legend for the traffic map.

How do you search for traffic incidents?

1. From the main menu, select > Navigation > Traffic.
2. Select > Incidents.
3. Select an item in the list.
4. If there is more than one incident, use the arrows to view additional incidents.

What is voice command?

Voice command allows you to use your device by saying words and commands. The voice command menu provides voice prompts and a list of available commands.

What are some notes about voice command?

Voice command is not available for all languages and regions, and may not be available on all models. Voice Activated Navigation may not achieve desired performance when in a noisy environment.

What are some tips for speaking to the device?

• Speak in a clear voice directed at the device.
• Start each request with OK, Garmin.
• Reduce background noise, such as voices or the radio, to help the device interpret your commands more accurately.
• Respond to voice prompts from the device as needed.
• If you do not receive a useful response, try rephrasing your request.
• If the device does not respond to your requests, verify it is not placed near a speaker or air vent, which can produce noise that interferes with the microphone.

What is Garmin voice-activated navigation?

Garmin voice-activated navigation allows you to use plain language spoken requests to search for locations and addresses, start routes with turn-by-turn directions, place hands-free phone calls, and more.

How do you launch Garmin voice-activated navigation?

Say OK, Garmin, and make a spoken request. For example, you can say phrases like these:

• OK, Garmin, take me home.
• OK, Garmin, where’s the library?

How do you check your arrival time while a route is active?

Say OK, Garmin, what time will we arrive?

How do you place a phone call using your voice?

You can use a voice command to call to a contact from the phone book of your paired smartphone. Say OK, Garmin, call, and say the contact name. For example, you can say OK, Garmin, call Mom.

How do you change device settings using your voice?

You can say phrases like these to set device settings to a value from 0 to 10.

• OK, Garmin, increase the volume.
• OK, Garmin, set the volume to 0.
• OK, Garmin, set the volume to 9.

How do you view the owner’s manual on your device?

You can view the complete owner’s manual on the device screen in many languages.

1. Select > Tools > Owner’s Manual.
2. The owner’s manual appears in the same language as the software text.
3. Select to search the owner’s manual (optional).

What is the route planner?

You can use the route planner to create and save a route, which you can navigate later. This can be useful for planning a delivery route, a vacation, or a road trip. You can edit a saved route to further customize it, including reordering locations, adding suggested attractions, and adding shaping points. You can also use the route planner to edit and save your active route.

What does planning a route entail?

A route can include many locations, and it must include at least a starting location and one destination. The starting location is the location from which you plan to start your route. If you start navigating the route from a different location, the device gives you the option to route to your starting location first. For a round trip, the starting location and final destination can be the same.

How do you plan a route?

1. Select Route Planner > Create Route.
2. If necessary, select a calculation mode. NOTE: The Faster Time mode is selected by default.
3. Select an option to choose a location for your starting point:
   • Select a location on the map.
   • Select , and search for a location.
4. Repeat step 3 to add more locations. NOTE: The last location you add is the destination.
5. After you have added all the necessary locations, select .

How do you edit and reorder locations in a route?

1. Select Route Planner.
2. Select a saved route.
3. Select List.
4. Select a location.
5. Select an option:
   • To change the location, select , and enter a new location.
   • To move the location up or down, select , and drag the location to a new position in the route.
   • To add a new location after the selected location, select .
   • To remove the location, select .

How do you change routing options for a route?

You can customize how the device calculates your route.

1. Select > Route Planner.
2. Select a saved route.
3. Select .
4. Select an option:
   • To add shaping points to your route, select Shaping, and select at least one location.
   • To change the calculation mode for the route, touch a route segment, and select a calculation mode.

How do you navigate to a saved route?

1. Select > Route Planner.
2. Select a saved route.
3. Select Go!.
4. Select the first location to navigate to, and select OK.
5. Select Start. The device calculates a route from your current location to the selected location, and then it guides you to the remaining route destinations in order.

How do you edit and save your active route?

If a route is active, you can use the route planner to edit and save it.

1. Select > Route Planner > My Active Route.
2. Edit your route using any of the route planner features. The route recalculates each time you make a change.
3. Select Save to save your route, which you can navigate again later (optional).

What are loyalty programs?

From your RV / Camper device, you can access loyalty programs from some of the travel plazas in the United States, including Pilot Flying J Travel Centers. You can use the loyalty program apps on your RV / Camper device to check reward points balances and other loyalty program information. To activate loyalty program features, sign in to your loyalty program account in the Garmin Drive app. NOTE: This feature is available only in the United States.

How do you log service history?

You can log the date and odometer reading when service or maintenance is performed on your vehicle. The device provides several service categories, and you can add custom categories.

1. Select > Tools > Service History.
2. Select a service category.
3. Select Add Record.
4. Enter the odometer reading, and select Next.
5. Enter a comment (optional).
6. Select Done.

How do you add service categories?

1. Select > Tools > Service History.
2. Select > Add Category.
3. Enter a category name, and select Done.

How do you delete service categories?

When you delete a service category, all service records in the category are also deleted.

1. Select > Tools > Service History.
2. Select > Delete Categories.
3. Select the service categories to delete.
4. Select Delete.

How do you rename service categories?

1. Select > Tools > Service History.
2. Select the category to be renamed.
3. Select > Rename Category.
4. Enter a name, and select Done.

How do you edit a service record?

You can edit the comment, odometer reading, and date of a service record.

1. Select > Tools > Service History.
2. Select a category.
3. Select a field.
4. Enter the new information, and select Done.

How do you delete service records?

1. Select > Tools > Service History.
2. Select a service category.
3. Select > Delete Records.
4. Select the service records to be deleted.
5. Select Delete.

What do you need to do before you can view the weather forecast?

Before you can use this feature, your device must be receiving weather data. You can connect your device to the Garmin Drive app to receive weather data.

How do you view the weather forecast?

1. From the home screen, select the weather widget. The device shows the current weather conditions and a forecast for the next several days.
2. Select a day. The detailed forecast for that day appears.

How do you view weather near a different city?

1. From the home screen, select the weather widget.
2. Select Current Location.
3. Select an option:
   • To view weather for a favorite city, select a city in the list.
   • To add a favorite city, select Add City, and enter a city name.

What does the Garmin PowerSwitch™ App do?

• Opens the app settings menu
• Enters editing mode to customize the app layout and functions
• Turns off all outputs
• Power buttons Activates each connected output
• Displays input voltage
• Displays the total amperage of the selected Garmin PowerSwitch device
• Displays the device name
• Displays Garmin PowerSwitch device tabs and custom layout tabs

What do you need to do before you can use the Garmin PowerSwitch app to activate a switch?

Before you can use the Garmin PowerSwitch app to activate a switch, you must install your Garmin PowerSwitch device in your vehicle and pair it with the Garmin PowerSwitch app.

How do you activate a power switch?

From the Garmin PowerSwitch app, select a power button to turn a switch on or off.

How do you turn off all switches?

Select .

How do you customize a button?

1. From the Garmin PowerSwitch app screen, select . The app enters editing mode.
2. Select on the button you want to customize.
3. Select an option:
   • To change the name of the button, select the Button Label field, and enter a name.
   • To add an icon to the button, select the Icon field, and select an icon.
   • To change the button color, select a color.
   • To change the button mode, select a button mode.
   • To adjust the intensity of the switch, use the slider.
   • To set the button to activate with a control input, select a control input.
4. Select .
5. Select Done.

What do you need to do before you can use control input functions?

Before you can use control input functions, you must connect a control input to your Garmin PowerSwitch device.

How do you assign a switch to a control input?

You can assign one or more switches to turn on when the Garmin PowerSwitch device receives a signal from a control input.

1. Select .
2. Select your Garmin PowerSwitch device.
3. Select a control input.
4. Select one or more switches.

How do you add a custom layout?

You can add a custom layout tab to the Garmin PowerSwitch app. Buttons added to a custom layout can control multiple switches at the same time.

1. From the Garmin PowerSwitch app, select . The device enters editing mode.
2. Select .

How do you add a button to a custom layout?

1. From the Garmin PowerSwitch app, select a custom layout tab.
2. Select . The app enters editing mode.
3. Select Add Button.
4. On the new button, select .
5. Select an option:
   • To change the name of the button, select the Button Label field, and enter a name.
   • To add an icon to the button, select the Icon field, and select an icon.
   • To change the button color, select a color.
6. Select Add Action.
7. If necessary, select a Garmin PowerSwitch device and a switch.
8. Select an action:
   • To set the button to turn the switch on or off with each press, select Toggle.
   • To set the button to turn on the switch, select Turn On.
   • To set the button to turn off the switch, select Turn Off.
9. Select a button mode:
   • To set the button to activate with one touch, select Normal.
   • To set the button to activate only while touching the button, select Momentary.
   • To set the button to turn on and off repeatedly, select Strobe, and select time intervals.
10. If applicable, use the slider to set the brightness of lights.
11. Select .
12. If necessary, select Add Action to add additional actions for the button. You can add one action for every switch on the Garmin PowerSwitch device.

How do you arrange buttons in a custom layout?

1. From the Garmin PowerSwitch app, select a custom layout tab.
2. Select . The app enters editing mode.
3. On the button you want to move, hold , and drag the button to a new location.

How do you delete a custom layout or button?

1. From the Garmin PowerSwitch app, select a custom layout tab.
2. Select . The app enters editing mode.
3. Select an option:
   • To delete a button, select on the button you want to delete.
   • To delete a layout tab, select on the layout tab.

How do I enable map products installed on my device?

1. Select Settings > Map Display > myMaps.
2. Select a map.

How do I connect to a wireless network?

1. Select Settings > Wireless Networks > Wi-Fi.
2. If necessary, select the toggle switch to turn on wireless network technology.
3. Select a wireless network.
4. If necessary, enter the encryption key.

The device connects to the wireless network. The device remembers the network information and connects automatically when you return to this location in the future.

How do I enable Bluetooth wireless technology?

Select Settings > Wireless Networks > Bluetooth.

How do I adjust the sound and notification volume?

1. Select Settings > Device > Sound & Notification.
2. Use the slider bars to adjust the sound and notification volume.

How do I set an alarm?

1. Select > Tools > Clock > > .
2. Set a time.
3. If necessary, select the toggle switch to turn on the alarm.

How do I enable or disable location services?

1. Select Settings > Personal > Location.
2. Select the toggle switch to enable or disable location services.

How do I set the text language?

1. Select Settings > Personal > Language & Input > Language.
2. Select a language.

How do I restore settings?

You can restore a category of settings to the factory default values.

1. Select Settings.
2. Select a settings category.
3. Select > Restore.

How do I view e-label regulatory and compliance information?

1. From the settings menu, swipe to the bottom of the menu.
2. Select About Device > Regulatory information.

How do I charge the device?

You can charge the battery in the device using any of these methods.

• Install the device in the mount, and connect the mount to vehicle power.
• Connect the device to an optional power adapter accessory, such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer or http://www.garmin.com. The device may charge slowly when connected to a third-party adapter.

How do I update maps and software using a Wi‑Fi Network?

You can update the maps and software by connecting your device to a Wi‑Fi network that provides access to the internet. This allows you to keep your device up to date without connecting it to a computer.

1. Using the included USB cable, connect the device to external power.

NOTE: A USB power adapter is not included. Go to the product page on garmin.com to purchase a power adapter accessory.

2. Connect the device to a Wi‑Fi network (Connecting to a Wireless Network).

While connected to a Wi‑Fi network, the device checks for available updates automatically and displays a notification when an update is available.

3. Select an option:

• When an update notification appears, swipe down from the top of the screen, and select An update is available…
• To manually check for updates, select Settings > Updates.

The device displays available map and software updates. When an update is available, Update Available appears below Map or Software.

4. Select an option:

• To install all available updates, select Download.
• To install only map updates, select Map.
• To install only software updates, select Software.

5. If necessary, read the license agreements, and select Accept All to accept the agreements.

NOTE: If you do not agree with the license terms, you can select Reject. This stops the update process. You cannot install updates until you accept the license agreements.

6. Keep the device connected to external power and within range of the Wi‑Fi network until the update process is complete.

TIP: If a map update is interrupted or canceled before it completes, your device may be missing map data. To repair missing map data, you must update the maps again.

How do I update maps and software with Garmin Express?

You can use the Garmin Express application to download and install the latest map and software updates for your device.

1. If you do not have the Garmin Express application installed on your computer, go to garmin.com/express and follow the on-screen instructions to install it (Installing Garmin Express).

2. Open the Garmin Express application.

3. Connect your device to your computer using a USB cable.

The small end of the cable connects to the USB port on your RV / Camper device, and the large end connects to an available USB port on your computer.

4. When your RV / Camper device prompts you to enter file transfer mode, select Continue.

5. In the Garmin Express application, click Add a Device.

The Garmin Express application searches for your device and displays the device name and serial number.

6. Click Add Device, and follow the on-screen instructions to add your device to the Garmin Express application.

When setup is complete, the Garmin Express application displays the updates available for your device.

7. Select an option:

• To install all available updates, click Install All.
• To install a specific update, click View Details, and click Install next to the update you want.

The Garmin Express application downloads and installs the updates onto your device. Map updates are very large, and this process may take a long time on slower internet connections.

NOTE: If a map update is too large for the internal storage of the device, the software may prompt you to install a microSD® card in your device to add storage space.

8. Follow the on-screen instructions during the update process to finish installing updates. For example, during the update process, the Garmin Express application may instruct you to disconnect and reconnect your device.

How do I install Garmin Express?

The Garmin Express application is available for Windows® and Mac® computers.

1. On your computer, go to garmin.com/express.

2. Select an option:

• To view the system requirements and verify the Garmin Express application is compatible with your computer, select System Requirements.
• To install on a Windows computer, select Download for Windows.
• To install on a Mac computer, select Download for Mac.

3. Open the downloaded file, and follow the on-screen instructions to complete the installation.

How do I clean the outer casing?

1. Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution.
2. Wipe the device dry.

How do I clean the touchscreen?

1. Use a soft, clean, lint-free cloth.
2. If necessary, lightly dampen the cloth with water.
3. If using a dampened cloth, turn off the device and disconnect the device from power.
4. Gently wipe the screen with the cloth.

How do I avoid theft?

• Remove the device and mount from sight when not in use.
• Remove the residue left on the windshield by the suction cup.
• Do not keep your unit in the glove compartment.
• Register your device using the Garmin Express software (garmin.com/express).

How do I restart the device?

You can restart your device if it stops functioning.

Hold the power key for 7 seconds.

How do I remove the mount from the suction cup?

1. If necessary loosen the nut that secures the mount to the suction cup ball.
2. Turn the device mount to the right or left.
3. Apply pressure until the socket on the mount releases the ball on the suction cup.

How do I remove the suction cup from the windshield?

1. Flip the lever on the suction cup toward you.
2. Pull the tab on the suction cup toward you.

What if the suction cup will not stay on my windshield?

1. Clean the suction cup and windshield with rubbing alcohol.
2. Dry with a clean, dry cloth.
3. Mount the suction cup (Mounting and Powering the Device in Your Vehicle).

What if the mount does not hold my device in place while I drive?

For the best results, you should keep the vehicle mount clean and position the device close to the suction cup. If the device shifts position while you are driving, you should complete these actions.

• Remove the powered mount from the suction cup arm, and wipe the ball and socket with a cloth.

Dust and other debris may reduce the friction in the ball and socket joint and allow the joint to shift while you are driving.

• Rotate the hinged arm toward the suction cup as far as your windshield angle allows.

Positioning the device closer to the windshield reduces the effect of jarring and vibration from the road.

What if my device is not acquiring satellite signals?

• Verify the location services feature is enabled (Enabling or Disabling Location Services).
• Take your device out of parking garages and away from tall buildings and trees.
• Remain stationary for several minutes.

What if the device does not charge in my vehicle?

• Verify the vehicle is turned on and is supplying power to the power outlet.
• Verify the interior temperature of the vehicle is within the charging temperature range indicated in the specifications.
• In the vehicle fuse box, verify the fuse for the vehicle power outlet is not broken.

What if my battery does not stay charged for very long?

• Decrease the screen brightness (Display Settings).
• Shorten the display timeout (Display Settings).
• Decrease the volume (Adjusting Sound and Notification Volume).
• Turn off the wi-fi radio when it is not in use (Connecting to a Wireless Network).
• Put the device in power saving mode when not in use (Turning the Device On or Off).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.

What if my device does not connect to my phone?

• Select Settings > Wireless Networks > Bluetooth.

The Bluetooth option must be enabled.

• Enable Bluetooth wireless technology on your phone and bring your phone within 10 m (33 ft.) of the device.
• Verify your phone is compatible.

Go to http://www.garmin.com/bluetooth for more information.

• Complete the pairing process again.

To repeat the pairing process, you must unpair your phone and device (Deleting a Paired Bluetooth Device), and complete the pairing process (Pairing with Your Smartphone).

What are some mounting considerations for the Garmin PowerSwitch device?

• The device must be mounted close to the battery and within the range of the supplied power cable.
• The mounting surface must be strong enough to support the weight of the device.
• The location must allow room for the routing and connection of all cables.

How do I mount the device?

Before you can mount the device, you must select a mounting location and purchase the appropriate hardware for your mounting surface.

1. Place the mount on the selected location.

2. Using the mount as a template, mark the two screw locations .

3. Drill pilot holes (optional).

For some types of mounting material, drilling pilot holes is necessary. Do not drill through the mount.

4. Securely fasten the mount to the surface using the appropriate hardware for your mounting surface.

How do I set the route calculation method?

Select Settings > Navigation > Calculation Mode.

How do I set road features to avoid on a route?

Select Settings > Navigation > Avoidances.

How do I avoid specific roads or areas?

Select Settings > Navigation > Custom Avoidances.

How do I disable all functions that require significant operator attention?

Select Settings > Navigation > Restricted Mode.

How do I set the language for navigation voice prompts?

Select Settings > Navigation > Voice Language.

How do I clear all travel history from the device?

Select Settings > Navigation > Clear Travel History.

How do I set the vehicle icon that represents your position on the map?

Select Settings > Map Display > Vehicle.

How do I set the perspective on the map?

Select Settings > Map Display > Driving Map View.

How do I set the level of detail on the map?

Select Settings > Map Display > Map Detail.

More detail may cause the map to draw slower.

How do I change the color of the map data?

Select Settings > Map Display > Map Theme.

How do I set the data that appears on the map page?

Select Settings > Map Display > Map Layers (Customizing the Map Layers).

How do I automatically select the zoom level for optimal use of your map?

Select Settings > Map Display > Auto Zoom.

When disabled, you must zoom in or out manually.

How do I set a confirmation message to appear when skipping a location on your route?

Select Settings > Map Display > Skip Next Stop Confirmation.

How do I set which installed maps the device uses?

Select Settings > Map Display > myMaps.

How do I enable an audible alert for each type of driver alert?

Select Settings > Driver Assistance > Driver Alerts (Driver Awareness Features and Alerts).

How do I get alerts when you approach speed cameras or red light cameras?

Select Settings > Driver Assistance > Proximity Alerts.

How do I show a preview of the major roads in your route when you start navigation?

Select Settings > Driver Assistance > Route Preview.

How do I enable break reminders and upcoming service suggestions?

Select Settings > Driver Assistance > Break Planning.

How do I enable the traffic feature?

From the main menu, select Settings > Traffic > Traffic.

How do I set the traffic provider to use for traffic data?

From the main menu, select Settings > Traffic > Current Provider.

The Auto option selects the best available traffic data automatically.

How do I enable the device to use optimized alternate routes automatically or upon request?

From the main menu, select Settings > Traffic > Optimize Route (Avoiding Traffic Delays on Your Route).

How do I set the traffic delay severity for which the device displays a traffic alert?

From the main menu, select Settings > Traffic > Traffic Alerts.

How do I set the display brightness level on your device?

Select Settings > Device > Display > Brightness level.

How do I enable or disable the dark color theme?

Select Settings > Device > Display > Dark theme.

How do I set the wallpaper background on your device?

Select Settings > Device > Display > Wallpaper.

How do I set the amount of idle time before your device turns off the display while using battery power?

Select Settings > Device > Display > Screen timeout.

How do I increase or decrease the font size on your device?

Select Settings > Device > Display > Font size.

How do I enable the screen to rotate automatically between portrait and landscape display modes based on the device orientation or remain in the current orientation?

Select Settings > Device > Display > When device is rotated.

How do I set the volume levels for navigation, media, calls, alarms, and notification alerts?

Select Settings > Device > Sound & Notification > Volume Sliders.

How do I set the rules for the automatic do-not-disturb feature?

Select Settings > Device > Sound & Notification > Do not disturb.

This feature allows you to disable audible alerts during specific times or events.

How do I set the default notification ringtone sound on your device?

Select Settings > Device > Sound & Notification > Default notification ringtone.

How do I enable or disable sounds for other device interactions, such as screen touches, screen locking, or charging?

Select Settings > Device > Sound & Notification > Other sounds.

How do I set whether notifications appear on the screen while the device is locked?

Select Settings > Device > Sound & Notification > When device is locked.

How do I enable or disable notifications for each installed app and modify the do not disturb preferences for each app?

Select Settings > Device > Sound & Notification > App notifications.

How do I select which apps have access to read system and app notifications?

Select Settings > Device > Sound & Notification > Notification access.

How do I select which apps can override or modify the do not disturb settings?

Select Settings > Device > Sound & Notification > Do not disturb access.

How do I automatically set the time zone based on information from the connected network?

Select Settings > System > Date & Time > Use network-provided time.

How do I set the time zone on your device when Use network-provided time is disabled?

Select Settings > System > Date & Time > Use network-provided time zone.

How do I enable or disable the 24-hour time format?

Select Settings > System > Date & Time > Use 24-hour format.

How do I view the end-user license agreement (EULA) and software license information?

Select Settings > About Device > Legal Information.

How do I display hardware and software version information?

Select Settings > About Device > Garmin device information.

How do I open the front cover?

1. Lift the front cover latch and rotate it counter-clockwise.
2. Pull the front cover off of the device.

What are the accessory requirements?

• Verify the amperage rating of each accessory before wiring it to the Garmin PowerSwitch device. The device supports accessories up to 30 A for each channel and a maximum of 100 A for the entire system.
• Use 10 AWG (6 mm2) wires for accessories that use 20 to 30 A.
• Use 12 AWG (4 mm2) wires for accessories that use 10 to 20 A.
• Use 14 AWG (2.5 mm2) wires for accessories that use less than 10 A.
• Use the appropriate size terminals for all accessory connections.
• Crimp all terminal connectors securely.

How do I connect accessories?

1. Connect the positive wire from the accessory to one of the accessory terminals on the Garmin PowerSwitch device.
2. Connect the negative or ground wire to an unpainted ground stud on the vehicle frame, to a ground distribution block, or directly to the negative terminal on the battery.
3. Verify that all electrical connections are tight and will not come loose during use.

Can I use the device to control or power a winch?

No. Do not use the device to control or power a winch. Failure to follow this notice could cause damage to your vehicle or your device.

Can I connect a power source to an accessory output terminal?

No. Do not connect a power source to an accessory output terminal. Failure to follow this notice could cause damage to your vehicle or your device.

Why shouldn’t I connect the accessory ground wires to the ground terminal (GND) on the Garmin PowerSwitch device?

Doing so could result in personal injury or property damage, or could negatively impact device functionality.

How do I connect a control input?

Connect the control wire from the control source in your vehicle to one of the two control terminals on the Garmin PowerSwitch device.

What is the function of the control terminals?

You can connect to the control terminals to enable the Garmin PowerSwitch device to turn on customizable outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on accessories automatically each time you start your vehicle.

What voltage do the control terminals detect?

The control terminals detect a signal from 3.3 V to 18 V.

How do I configure output functions?

You can configure output functions with the Garmin PowerSwitch app.

How do I connect the device to vehicle power?

1. Before you can connect the device to vehicle power, you must remove the warning tag from the +12V terminal on the device. You should always confirm all electrical connections are secure and will not come loose while operating the device.
2. Connect the large ring end of the included ground wire to the negative terminal on the vehicle battery.
3. Connect the small ring end of the ground wire to the GND terminal on the device.
4. Connect the small ring end of the included 12V cable to the +12V terminal on the device.
5. Tighten the 3/8 in. nut on the +12V terminal to a maximum torque specification of 4.52 N-m (40 lbf-in.). You should confirm the nut cannot be loosened by hand.
6. Connect the large ring end of the 12V cable to the positive terminal on the vehicle battery.

Why shouldn’t I overtighten the +12V terminal?

Overtightening the +12V terminal may damage the terminal.

How do I pair with a Garmin navigation device?

1. Turn on power to your Garmin PowerSwitch device, and place your compatible Garmin navigation device within 1 m (3.3 ft.) of it.
2. On your compatible navigation device, open the Garmin PowerSwitch app.
3. Follow the on-screen instructions to complete the pairing and setup process. The main app dashboard appears. After the devices are paired, they connect automatically when they are turned on and within range.

What are the Garmin PowerSwitch specifications?

Specification	Value
Dimensions (D x W x H)	75 x 125 x 32 mm (2.95 x 4.92 x 1.26 in.)
Operating temperature range	From -25° to 85°C (from -13° to 185°F)
Wireless frequency	2.4 GHz @ 14 dBm
Power input	From 12 to 16 V using the included vehicle power cable.
Maximum accessory output	30 A
Maximum system output	100 A
Current draw with all outputs off	3 mA
Water rating	IEC 60529 IPX71
	The Garmin PowerSwitch device withstands incidental exposure to water of up to 1 m for up to 30 min.

What should I do if my Garmin PowerSwitch will not stay connected?

• Verify the Garmin PowerSwitch device is receiving power.
• Verify that Bluetooth technology is enabled on your paired navigation device or smartphone.
• Move the navigation device or smartphone closer to your Garmin PowerSwitch device.
• Verify that your vehicle’s battery is supplying at least 12 V of power.

What happens if the Garmin PowerSwitch device is receiving less than 11 V of power?

The Garmin PowerSwitch device turns off all outputs automatically to preserve your vehicle’s battery.

What should I do if my accessories are not receiving power?

• Verify the Garmin PowerSwitch device is receiving power from the vehicle battery.
• Verify that your vehicle’s battery is supplying at least 12 V of power. The Garmin PowerSwitch device turns off all outputs automatically to preserve your vehicle’s battery if it is receiving less than 11 V of power. Outputs turn back on when the device detects more than 12 V of power.
• Verify that all electrical connections are secure and will not come loose while operating the vehicle.
• Verify that each connected accessory draws less than 30 A. If an accessory draws more than 30 A, the device turns off that output automatically.
• Verify that the total system load is less than 100 A. If the device detects a system load of more than 100 A, it turns off all outputs automatically.
• Inspect all electrical connections for an electrical short circuit.

What are the steps to pair a BC™ 50 Backup Camera with a Garmin navigation device?

1. Before you can connect to a camera you must enable the Wi‑Fi setting on your Garmin navigation device. The BC 50 wireless backup camera is compatible with some Garmin navigation devices with Android. Go to garmin.com/bc50 for more information about device compatibility. You can pair up to four BC 50 wireless backup cameras with your compatible Garmin navigation device.
2. Update your navigation device to the latest software. Your device may not support the BC 50 camera without the latest software. For more information about updating the software, see the owner’s manual for your navigation device.
3. Turn on the Garmin navigation device, and bring it within 3 m (10 ft.) of the camera.
4. Place the vehicle in reverse to power the camera.
5. Select > Tools > Cameras > > Garmin BC50.
6. Select your BC 50 camera from the list of available cameras.
7. Position the guidance lines using the on-screen arrows. If the camera or vehicle is not ideally positioned to complete the guidance line alignment, you can complete the alignment later.
8. Select Save. After you complete the pairing process with a camera for the first time, the camera and navigation device connect automatically when they are turned on and within range.

How do I connect a wired backup camera?

1. To connect a wired backup camera, you must use an optional video mount accessory, which includes a 3.5 mm composite video input jack. Go to garmin.com to purchase an accessory mount. The video mount accessory is included with some device models. You can connect a wired backup camera and view the output on the device screen.
2. Replace the original device mount with the video mount accessory.
3. Plug the camera video cable into the video input jack on the mount.

How do I view the backup camera?

After you pair your camera with a compatible Garmin navigation device, the camera view appears automatically when you turn on your navigation device, and you can manually show the camera at any time.

• If your navigation device is connected to an ignition-switched power outlet (recommended), turn on your vehicle.
• If your navigation device is connected to an always-on power outlet, turn on the navigation device.
• To show the camera manually, select .
• To show or hide the camera using voice commands, say Show Video or Hide Video. NOTE: Voice commands are not available on all navigation devices. The voice commands may vary based on your navigation device model. This feature is not available for all languages or may require additional navigation device setup for some languages. For more information, see the Voice Command app or the Voice Control app on your navigation device, or the navigation device owner’s manual.

The camera view appears. When the camera detects the vehicle is moving forward, the camera automatically stops sending video, and the navigation device returns to normal operation. The camera video is dismissed automatically after 2 minutes and 30 seconds, whether or not your vehicle has moved forward.

How do I switch cameras when multiple backup cameras are transmitting to my device?

1. Select > Tools > Cameras.
2. Select a camera from the bottom of the screen. The video feed from the camera appears.

How do I change the camera orientation?

1. From the camera view, select an option:
   • Select > Adjust Video.
   • Tap the screen, and select .
2. Select to reverse the image or to flip the image.
3. Select .

How do I connect a dash camera to the powered mount?

1. Before you connect a dash camera to the powered mount, you should mount the dash camera device to your windshield. You can use the RV / Camper device mount to power a compatible Garmin dash camera. This can be useful if you need to connect the RV / Camper device and the dash camera to the same power source in your vehicle.
2. Mount the RV / Camper device in your vehicle, and connect it to power.
3. If necessary, remove the RV / Camper device from the magnetic mount for a better view of the USB port.
4. Plug the dash camera’s power cable into the USB port on the mount.

What is the device’s memory card slot for?

The device has a memory card slot for additional data storage. NOTE: The device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer. Apple computers may require additional third-party software to read and write files.

What can I use memory cards for?

Memory cards can be used to store files such as maps and POIs.

How do I format the memory card?

1. The device requires a memory card formatted using the FAT32 file system. You can use the device to format your card using this file system. You must format a brand new memory card if it is not formatted using the FAT32 file system. NOTE: Formatting the memory card deletes all data on the card.
2. Select Settings > Device > Storage & USB.
3. Select your memory card.
4. Select > Storage settings > Format > FORMAT SD CARD.
5. Select Done.

How do I connect the device to my computer?

1. Plug the small end of the USB cable into the port on the device.
2. Plug the larger end of the USB cable into a port on your computer.
3. When your RV / Camper device prompts you to enter file transfer mode, select Continue. Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.

How do I transfer data from my computer?

1. Connect the device to your computer. Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.
2. On your computer, open the file browser.
3. Select a file.
4. Select Edit > Copy.
5. Browse to a folder on the device. NOTE: For a removable drive or volume, you should not place files in the Garmin folder.
6. Select Edit > Paste.

How do I transfer GPX files from my computer?

1. Apple computers may require additional third-party software, such as Android File Transfer, to read and write files on this device. If you have already created routes that you want to use on your device, you can transfer GPX files directly from your computer.
2. Connect the device to your computer. The device appears as a portable device.
3. On your computer, open the file browser.
4. Select a GPX file.
5. Select Edit > Copy.
6. Browse to the GPX folder on the device.
7. Select Edit > Paste.

How do I export GPX files with the Garmin Drive app?

1. On your RV / Camper device, select an option:
   • To share waypoints, select Where To? > Saved > > Share > Garmin Drive.
   • To share routes, select > Navigation > Trip Planner > Saved Trips > > Share > Garmin Drive.
2. Select one or more waypoints or routes.
3. Select Done.
4. On your phone, open the Garmin Drive app.
5. Follow the on-screen instructions to share the .gpx files.

How do I import GPX files with the Garmin Drive app?

1. You can import data, such as waypoints and routes, in GPX file format using the Garmin Drive app. For example, you can send waypoints or routes received in an email to your RV / Camper device.
2. On your smartphone, select a .gpx file and open it with the Garmin Drive app.
3. Follow the on-screen instructions in the Garmin Drive app.
4. On your RV / Camper device, select an option:
   • To view imported waypoints, select Where To? > Saved.
   • To view imported routes, select > Navigation > Trip Planner > Saved Trips.

How do I export GPX files with a memory card?

1. Insert a compatible microSD card into the memory card slot on your device.
2. On your RV / Camper device, select an option:
   • To share waypoints, select Where To? > Saved > > Share > Memory Card.
   • To share routes, select > Navigation > Trip Planner > Saved Trips > > Share > Memory Card.
3. Select one or more waypoints or routes.
4. Select Done.

How do I import GPX files with a memory card?

1. Insert a compatible microSD card containing one or more .gpx files into the memory card slot on your device. The RV / Camper device automatically imports any .gpx files found on the microSD card.
2. Select an option:
   • To view imported waypoints, select Where To? > Saved.
   • To view imported routes, select > Navigation > Trip Planner > Saved Trips.

How do I purchase additional maps?

1. Go to your device product page at garmin.com.
2. Click the Maps tab.
3. Follow the on-screen instructions.

Where can I purchase optional accessories?

Optional accessories are available at garmin.com or from your Garmin dealer.