Free English FORFEND CBE (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD FORFEND CBE (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.


How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.


What items are included in the package of the FORFEND CBE?

The package of the FORFEND CBE includes the following items:

Item Number Component Description
1 Safe Box
2 Gateway
3 Backup Keys
4 Screws
5 Footpads
6 User Manual

What are the components of the FORFEND CBE safe box?

The FORFEND CBE safe box features the following internal and external parts:

Part Number Component Name Description / Location
8 Pre-drilled Holes Located on the bottom and back for mounting
9 Shelf Interior storage shelf
10 Bolt Locking door mechanism bolt
11 Battery Compartment Holds the AA batteries inside the door
12 Green Button Interior button for registering passcode / fingerprint
13 Red Button Interior button for linking the safe to the gateway
14 Black Button Interior button for resetting the safe box
15 Knob Exterior knob used to open the safe door
16 Panel Cover Cover on the keypad protecting the backup keyhole
17 Red Light Exterior status indicator LED
18 Green Light Exterior status indicator LED
19 Yellow Light Exterior status indicator LED
20 Check Button Confirmation button on the keypad
21 House Button Keypad button used for the kidnap alarm
22 Cancel Button Keypad button used to cancel operations

What are the components and controls on the FORFEND CBE gateway?

The FORFEND CBE gateway is equipped with the following elements:

Part Number Feature Function
1 Antenna External antenna for wireless signal reception
2 Screen Digital display for time, status, and menu navigation
3 Setting Button Side button used to enter menus, confirm selections, or silence alarms
4 Up Button Side navigation button for menu scrolling and volume control
5 Down Button Side navigation button for menu scrolling and volume control
6 Speaker Emits audible notifications and alarm sounds
7 US Plug Integrated electrical plug for wall outlets

How do you open the FORFEND CBE safe box for the first time using the backup key?

Step 1. Push upward on the grey panel cover located on the keypad assembly to remove it.

Step 2. Insert the backup key into the keyhole.

Step 3. Turn the backup key counterclockwise.

Step 4. Turn the safe door knob clockwise to open the safe.


What are the battery specifications and requirements for the FORFEND CBE safe box?

The FORFEND CBE safe box requires 8 AA alkaline batteries. Duracell AA alkaline batteries are recommended for longer battery life.

Always use new AA alkaline batteries. New batteries cannot be used together with old batteries.


How do you install the batteries in the FORFEND CBE safe box?

Step 1. Open the battery compartment cover located on the inside of the safe door.

Step 2. Insert 8 new AA alkaline batteries, paying strict attention to the “+” and “-” signs. The “-” end of each battery must be placed against the spring inside the compartment.

Step 3. Close the battery compartment cover securely.


What lights and sounds indicate that batteries are correctly installed in the FORFEND CBE safe box?

When batteries are inserted correctly into the FORFEND CBE safe box, the safe will beep once.

After a few seconds of loading, all 3 indicator lights (red, green, and yellow) will light up together accompanied by another beep.


Where should the backup override keys of the FORFEND CBE safe box never be stored?

Do not place or store the override backup keys inside the FORFEND CBE safe box at any time.


What are the safety warnings regarding firearms and environmental hazards for the FORFEND CBE?

Do not store loaded guns in the safe. Firearms must be handled with respect and caution and stored responsibly.

Be sure to follow all local and state firearm laws, and do not operate a firearm without proper training and experience.

The FORFEND CBE is not intended to protect against environmental hazards including fire or water.


What general handling and temperature warnings apply to the FORFEND CBE safe?

Do not expose the safe to extreme heat or cold, as battery power may be affected.

Do not allow the fingerprint scanner to get wet.

Always check to make sure the safe door has closed and latched properly when it is not in use.


How do you download the mobile application for the FORFEND CBE?

Download the FORFEND App from the Apple App Store for iOS devices or Google Play for Android devices.


How do you create a new account in the app for the FORFEND CBE?

Step 1. Open the application and click “Create your Forfend account”.

Step 2. Enter your Email and choose a Password. The password must be at least 8 characters long, and capital letters matter.

Step 3. Check your email for a verification code (check spam or ads folders if not seen in the inbox).

Step 4. Enter the verification code into the app and confirm.

Step 5. Enter a “Nickname” to complete registration. You can change this name at any time in the “Personal Info” section of the app.


What are the distance requirements when placing the FORFEND CBE gateway, router, and safe box?

The distance between the FORFEND CBE gateway and your Wi-Fi router should be under 20 feet (5 meters).

The distance between the FORFEND CBE gateway and the safe box should be under 100 feet (30 meters).


How do you set up the hardware and access the Main Menu on the FORFEND CBE gateway?

Step 1. Install the antenna onto the FORFEND CBE gateway.

Step 2. Plug the gateway into a wall outlet close to your Wi-Fi router.

Step 3. When the gateway is in the “Home Window” (displaying the time), press and hold the “Setting Button” on the side for 3 seconds to enter the “Main Menu”.


What Wi-Fi network type is compatible with the FORFEND CBE gateway?

The FORFEND CBE gateway supports 2.4 GHz Wi-Fi networks only.

If you have a dual-band or 5 GHz router, contact your telecommunications provider to separate the Wi-Fi into distinct 2.4 GHz and 5 GHz networks.


How do you link the FORFEND CBE gateway to the app?

Step 1. From the gateway’s “Home Window”, hold the “Setting Button” on the side for 3 seconds to enter the “Main Menu”.

Step 2. Choose “Link Server”. The screen will automatically direct to the communicate page. (Do NOT choose “NET” for this step).

Step 3. Open the app, go to the “Main Menu” section, and click the “+” (Plus Icon) on the top right.

Step 4. Choose your available 2.4 GHz Wi-Fi network, enter the Wi-Fi password, and click “NEXT”.

Step 5. Go to your phone’s Wi-Fi settings, select the device hotspot starting with “FFS”, and return to the app to click “NEXT”.

Step 6. Wait for the app to finish the binding process to 100%. The gateway screen will return to the “Home Window”.


Why can you not select ‘NET’ during initial gateway linking on the FORFEND CBE?

A new user must choose “Link Server” to link the gateway and app. “NET” cannot be chosen before the gateway has been successfully linked with the app. “NET” is only used by existing users who have already linked the gateway to change the Wi-Fi network.


How do you pair the FORFEND CBE safe box to the gateway?

Step 1. While the gateway is in the “Home Window”, hold the “Setting Button” on the side for 3 seconds to access the “Main Menu”.

Step 2. Select “Link Product”. The gateway will automatically direct to the communicate screen.

Step 3. Press the interior red button (“Red Pairing Button”) inside the safe box.

Step 4. The gateway will display the pairing result once communication succeeds.


How many safe boxes can be paired to a single FORFEND CBE gateway?

Each FORFEND CBE gateway can pair with at most 5 safe boxes.


What does it mean when the FORFEND CBE gateway screen displays ‘BUSY’?

When the gateway displays “BUSY” under the time, the system is actively processing, and you cannot perform any operations during this state.


How do you adjust and save the volume and ringtones on the FORFEND CBE gateway?

Temporary volume change: Press the Up or Down buttons on the side of the gateway while it is in the “Home Window”. This setting will not save to the system and will revert to the previous level if the gateway is unplugged.

Permanent volume and ringtone change via App: Open the app, navigate to Gateway Settings, and change the volume or ringtones.

Permanent volume change via Gateway: Hold the Setting Button for 3 seconds to enter the “Main Menu”, select “Sound”, and adjust your preferences.


How do you turn off or silence an active alarm on the FORFEND CBE gateway?

You can turn off the alarm on the FORFEND CBE gateway by using the mobile app or by pressing the “Setting Button” directly on the side of the gateway.


How do you register a passcode on the passcode version of the FORFEND CBE safe?

Step 1. Press the interior Green Button inside the safe 1 time. The yellow light on the exterior keypad will turn on.

Step 2. Enter your desired passcode (4 to 8 digits) for the 1st round and press the “Check Button”. The green light will flash 3 times with 1 beep.

Step 3. Enter the exact same passcode for the 2nd round and press the “Check Button”. The green light will flash 5 times with 1 beep, and the yellow light will turn off.

Step 4. You will receive a “Naming” push notification on your app. Enter the desired name under “Message” or “Password List” to finish.


How do you register a passcode on the fingerprint version of the FORFEND CBE safe?

Step 1. Press the interior Green Button inside the safe 2 times. The yellow light on the exterior keypad will turn on.

Step 2. Enter your desired passcode (4 to 8 digits) for the 1st round and press the “Check Button”. The green light will flash 3 times with 1 beep.

Step 3. Enter the exact same passcode for the 2nd round and press the “Check Button”. The green light will flash 5 times with 1 beep, and the yellow light will turn off.

Step 4. Open the “Naming” notification received in the app to name your passcode entry.


What are the passcode length rules and error indicators for the FORFEND CBE?

The passcode must be between 4 and 8 digits in length.

Both the 1st and 2nd round passcode inputs must match exactly. If they do not match, the red light will flash with 1 beep sound, and the registration will return to the 1st round input.


How do you cancel or exit the passcode registration process on the FORFEND CBE?

Press the “Cancel Button” on the keypad to exit the process.

If you are in the 1st round, pressing the “Cancel Button” quits registration immediately.

If you are in the 2nd round, pressing the “Cancel Button” returns you to the 1st round; pressing the “Cancel Button” again will quit the entire process.


What should you do if an incorrect internal button is pressed during setup on the FORFEND CBE?

If you accidentally press the wrong internal button:

Red Button: Wait 10 seconds for the system to reset before starting again.

Black Button: You can immediately proceed to press other buttons directly.


How do you initiate fingerprint registration on the FORFEND CBE safe?

Press the interior Green Button inside the safe 1 time. The green light on the keypad will illuminate, indicating the safe is ready to collect fingerprints.

If you wish to quit before placing your finger on the sensor, press the “Cancel Button” on the keypad.


What are the light and sound indicators for the 5 registration rounds of a fingerprint on the FORFEND CBE?

Fingerprint registration on the FORFEND CBE requires 5 rounds of scanning with the following feedback:

Registration Round LED Light Feedback Sound Feedback
1st Round Green light and Yellow light turn on 1 beep
2nd Round All 3 lights turn on 1 beep
3rd Round Green light and Red light turn on 1 beep
4th Round Green light turns on 1 beep
5th Round All 3 lights turn off 1 beep

What is the recommended finger placement technique across the 5 registration rounds on the FORFEND CBE?

For the 5 rounds of fingerprint scanning, follow this placement method:

2 rounds: Scan the middle area of the finger by placing the core of the fingerprint flat over the center of the scanner, where most detail is located.

1 round: Scan the top tip of the finger.

2 rounds: Scan the edges of the finger.


How can you improve the fingerprint recognition success rate on the FORFEND CBE?

Clean the fingerprint sensor before registration. Excessive moisture, lotions, or dirt will affect fingerprint reading and cause sensor errors.

To maximize the recognition rate, register the same finger 4 or 5 times under separate entries.


What occurs if the fingerprint sensor fails to collect a scan on the FORFEND CBE?

If the sensor fails to collect the required fingerprint, the current light will flash 5 times, then all 3 lights will light up again accompanied by 5 beeps, and the safe will automatically quit the registration process.


Can you cancel fingerprint registration after starting collection on the FORFEND CBE?

No. Once you begin collecting the fingerprint for the first time, you cannot quit the registration process by pressing the “Cancel Button” on the keypad.


How does an owner add a sub-account for the FORFEND CBE?

Step 1. The main owner completes safe setup on their primary account.

Step 2. The second user registers a separate account in the app using a new email address.

Step 3. The safe owner provides their “Main Account ID” to the second user.

Step 4. The second user navigates to “Sub-Account” in their app, searches for the Main Account ID (capital letters matter), and sends a request.

Step 5. The safe owner receives the request notification (or finds it under “Message” in “Personal Info”) and selects “Agree”.

Step 6. The owner selects the specific safe they want to share to finalize authorization.


How many sub-accounts can be added to a FORFEND CBE safe?

The primary owner can add as many sub-accounts as desired to the FORFEND CBE safe.


What are the prerequisites before setting up Amazon Alexa with the FORFEND CBE?

Before configuring Amazon Alexa integration, ensure that:

1. Your FORFEND CBE safe is connected with the app.

2. You have an Alexa-enabled device (such as an Amazon Echo or Echo Dot).

3. The Amazon Alexa App is installed on your mobile device, and you are logged into an active Alexa account.


How do you link the FORFEND CBE using the Amazon Alexa App?

Step 1. Open the Alexa App and select “Skill & Games” from the “More” menu.

Step 2. In the skills search bar, type “Forfend Security”.

Step 3. Select the “ForfendSecuritySkill” and tap “ENABLE TO USE”.

Step 4. Log in using your registered companion app credentials (not your Amazon account credentials).


How do you link Amazon Alexa directly through the companion app for the FORFEND CBE?

Step 1. Open the companion app and select the “Alexa” icon located under the “Personal Info” menu.

Step 2. Select “Sign in with Amazon” and enable the “ForfendSecuritySkill”.

Step 3. Log in with your registered companion app credentials (not your Amazon account credentials).


What mandatory phrase must precede every voice command when controlling the FORFEND CBE with Alexa?

You must say “Alexa, Open Forfend Security” before giving every voice command.


What Alexa voice command is used to unlock the FORFEND CBE safe?

To unlock the safe, say: “Alexa, Open Forfend Security”, followed by “Unlock [Safe Name]” (e.g., “Unlock Bedroom Safe”).

If Alexa prompts for a password, state any valid passcode registered to the safe.


What Alexa voice commands control the tamper alarm on the FORFEND CBE?

To activate tamper alarm: Say “Alexa, Open Forfend Security”, then “Activate Tamper Alarm of [Safe Name]”.

To deactivate tamper alarm: Say “Alexa, Open Forfend Security”, then “Deactivate Tamper Alarm of [Safe Name]”.


What Alexa voice command turns off the FORFEND CBE gateway alarm?

To silence the gateway alarm via Alexa, say: “Alexa, Open Forfend Security”, followed by “Turn off the Alarm”.


What Alexa voice commands switch power modes on the FORFEND CBE?

To switch to High Performance Mode: Say “Alexa, Open Forfend Security”, followed by “High Performance Mode for [Safe Name]”.

To switch to Low Power Mode: Say “Alexa, Open Forfend Security”, followed by “Low Power Mode for [Safe Name]”.


What hotkey combinations are available on the FORFEND CBE safe box keypad?

The keypad supports the following hotkey commands:

Hotkey Sequence Function
Press 999 + Check Button Activate or deactivate the tamper alarm of the safe
Press 998 + Check Button Turn on or mute the keypad sound of the safe
Press 997 + Check Button Upload new data registered during stand-alone status to the app once connection is restored
Press 996 + Check Button Switch safe between High Performance Mode and Low Power Mode

Why should you avoid using hotkey 997 under normal operation on the FORFEND CBE?

Do not use hotkey 997 under normal usage conditions. If used unnecessarily, all registered fingerprints and passcodes in the app will lose their assigned names.


What are the trade-offs between High Performance Mode and Low Power Mode on the FORFEND CBE?

High Performance Mode provides faster signal delivery between the safe and gateway and faster remote operation speeds via the app or smart speaker, but results in higher battery consumption.

Low Power Mode provides longer battery life, but has slower signal delivery and longer response times when communicating with the server for remote actions.


How do you perform a factory reset on the FORFEND CBE safe box?

Step 1. Press the interior Black Button (Reset) inside the safe box 1 time. The yellow light on the keypad will illuminate.

Step 2. Press the Black Button a second time to confirm. The green light will turn on, confirming the safe has restored to factory settings.

Result: The link between the gateway and safe is erased, all registered passcodes and fingerprints are deleted, and the safe will no longer show in the app.


What is the default unlocking code of the FORFEND CBE after a factory reset?

Following a factory reset, the safe box reverts to the default factory code: 1-2-3-4.


How do you reset the FORFEND CBE gateway to factory settings?

Step 1. While the gateway is in the “Home Window”, hold the side “Setting Button” for 3 seconds to enter the “Main Menu”.

Step 2. Select “Reset” and confirm to reset the gateway.

Result: The connection between the gateway and all paired devices is deleted, the gateway is removed from the app, and any paired safe box will operate in stand-alone status. Resetting the gateway does not delete passcode or fingerprint data stored in the safe box itself.


How do you mount and secure the FORFEND CBE safe box to a flat surface?

Step 1. Position the safe on the flat mounting surface, ensuring adequate clearance for the safe door to swing open properly.

Step 2. Use a pencil to mark the drilling points through the pre-drilled holes located on the bottom and back of the safe.

Step 3. Move the safe aside and drill pilot holes into the marked surfaces.

Step 4. Position the safe back in place and insert the included mounting screws/expansion bolts through the safe into the pilot holes.

Step 5. Tighten all screws firmly to complete mounting.


How do you update Wi-Fi settings when changing networks on the FORFEND CBE gateway?

If you switch to a new Wi-Fi network, navigate to “Reconnect Internet” in the app gateway settings or select “NET” on the gateway menu for an already linked system.

This process updates the network credentials without resetting other device configurations or safe box data.


How do you unlink the FORFEND CBE safe from the gateway in the app?

Open the app, locate the “SafeBox Info” screen, find “Associated Gateway”, and slide left to unlink the safe.

Once unlinked, the safe will no longer communicate with the server and will function strictly in stand-alone status.


How does the Receiving Kidnap Push notification setting operate on the FORFEND CBE?

The “Receiving Kidnap Push” toggle is managed in the app settings.

If you turn this setting off, your device will not receive kidnap alarm push notifications. However, other authorized sub-accounts will still receive the kidnap alarm when it is triggered.


What happens if the Tamper Alarm setting is disabled in the app for the FORFEND CBE?

If you toggle off the “Tamper Alarm” setting in the app, the tamper sensor shuts down and the safe will no longer trigger alarms for physical tampering or suspicious vibration. Other types of alarms remain functional.


How does the unlock latch mechanism behave immediately following an unlock command on the FORFEND CBE?

Following an unlock command, the door latch remains open for 5 seconds. Remote app operations are unavailable during this 5-second interval.


What is the House Button on the keypad of the FORFEND CBE used for?

The House Button located on the lower right section of the safe keypad serves as the Kidnap Alarm trigger.


What radio frequency compliance standards apply to the FORFEND CBE?

The FORFEND CBE complies with Part 15 of the FCC Rules for Class B digital devices, intended to provide reasonable protection against harmful interference in residential installations.

Operation is subject to two conditions: the device may not cause harmful interference, and the device must accept any interference received, including interference that may cause undesired operation.


What corrective actions should be taken if the FORFEND CBE causes radio or television interference?

If radio or television interference occurs, the user can take the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and the receiver.

3. Connect the equipment into an electrical outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for assistance.


Where can instructional setup videos be viewed for the FORFEND CBE?

Instruction videos are accessible directly within the companion app under the “FAQ & VIDEO” section.

Video guides covering how to link the gateway with the app, link the safe with the gateway, register passcodes, and link sub-accounts are also available.


What occurs to stored credentials in the safe box when the FORFEND CBE gateway is reset?

Resetting the gateway deletes the wireless link between the gateway and the safe box, but it does not erase the credentials inside the safe box itself.

You can still unlock the safe using your registered fingerprints and passcodes in stand-alone mode; however, notifications will no longer be transmitted to the mobile app.


CLICK HERE TO DOWNLOAD FORFEND CBE (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.