FINGERS GLOBESOUND (01) PDF Document

To ensure safety while using your FINGERS GLOBESOUND speaker, please follow these guidelines:

1. Do not place the speaker near heat sources such as fire, radiators, stoves, and other apparatus that produce heat.

2. Use only accessories supplied by FINGERS.

3. Unplug the speaker once it is fully charged, when unused for long periods of time, or during lightning/thunderstorms.

4. It is recommended to refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

The box contains the following items:

1 x FINGERS GlobeSound Speaker

1 x USB-C Charging Cable

1 x Quick Start Guide

1 x Brand Note

The MFB/Play/Pause button on your FINGERS GLOBESOUND has multiple functions:

Play/Pause Music: Short Press

Navigate Modes: Long press to navigate the modes of Bluetooth, FM, USB, TF card Mode. (Note: USB/TF modes can only be operational when the corresponding device is inserted).

Search/Save FM Channel: Long Press

You can manage calls on your FINGERS GLOBESOUND speaker using the MFB/Play/Pause button:

Receive Call: Short Press

End Call: Again, Short Press

Redial last called number: Double Press

The RGB Lights Button/On-Off Switch controls the lights and power:

Navigate Lighting Modes: Short Press to navigate across 4 different lighting modes of the decorative horn lights and to disable the RGB Lights.

Switch On/Off Speaker: Long Press to switch On and Off the speaker.

The Previous Track/Volume Down button performs the following actions:

Previous Track/Previous FM Channel: Short Press

Volume Decrease: Long Press

BT Disconnect: Double Press

The Next Track/Volume Up button performs the following actions:

Next Track/Next FM Channel: Short Press

Volume Increase: Long Press

BT Disconnect: Double Press

When charging the FINGERS GLOBESOUND speaker, the LED indicator will be Red.

When it is fully charged, the Red LED indicator will switch off.

1. When the device is switched on, it automatically goes to BT mode.

2. If any other source is connected (USB, MicroSD), press the ‘M’ button until BT Mode is heard.

3. Make sure that Bluetooth is enabled on your device.

4. Find the device list and select “FINGERS GlobeSound”.

5. A sound prompt of “Connected” will be heard, and it is ready to play.

a) Turn off the BT function of the first connected device, and search for FINGERS GlobeSound on the 2nd device.

b) Repeat the pairing steps for the second device.

c) Turn Off the FINGERS GlobeSound Portable speaker once the 2nd device is connected successfully.

d) Switch on the BT function on the 1st device and the FINGERS GlobeSound portable speaker.

e) The speaker will attempt to reconnect to both previously paired devices when switched on.

f) The Speaker is now ready to use with both paired devices.

1. Press the “M” Button until the voice prompt of the word “FM Mode” is heard.

2. Long press the “►II” button to scan for stations automatically. You can press the same button again to stop the scan.

3. Once the FM radio is tuned, you can short press “+” and “-” to select the desired FM Channel.

4. To mute the FM, short press the “►II” button.

Insert the MicroSD card into the provided Slot. You can then play your favorite tracks directly from the MicroSD Card.

Insert the USB device (Pen Drive) into the provided port. You can then play your favorite tracks directly from the USB.

1. Switch off the speaker before cleaning it.

2. Use a soft cloth to clean the surface.

3. Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia, or abrasives.

4. Do not allow any liquid to enter into any of the openings.

*Tested under ideal conditions and in BT playback mode. Playback time may vary depending on usage, playback mode and volume levels.