Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: Download “VeryFit for heart rate” App Charge & Connect to App How to Use

1. Download VeryFit for heart rate app on your smartphone Please search and download the “VeryFit for heart rate” from App Store or Google play store. The smart band need to be paired with the smart phone through app. 2. Device Activate & Charge Make sure power is working normally before initial use. In case device is under low battery, connect the device to the charger. Device will automatically boot up (please connect the USB in normal DC port (5V-500mA) for charging as below. The host should be separated from the strap when charging). Key Definitions: Tap: function switch Long Press: activate mode switch


Google Play App Store USB charging port 3. Pair the device Open pair device in the app, please make sure the Bluetooth is ON when pair the device. When searching and pairing device, please long press on the screen of the device and activate the device (light on). App will search the device automatically, choose the device name and connect the device to the app. Once the device connected to the app successfully, it will record and analyze your activities and sleep automatically, please touch and sliding on the screen of the device to switch into dierent display modes as following: 1. Normal Mode 12:34AM 86 Time Mode Heart rate mode MON 23

Step mode .......156 0.49 KM Distance mode

Calories Mode 04 MON Activity Time Mode 59MIN

Altum HR Fitness Band **Select the device in the smart phone then Select Alarm mode Find Phone 12:34 ........ *

Confirm Bind Device** Excercise Tracker Note: alarm mode and find phone will only be displayed on the screen after switch ON in the APP.

2. Remote Camera Shoot Mode * ** Activities Record: Functions Instruction Can’t connect via Bluetooth Please install “Verfit for heart rate” app on your smart phone & connect through app. Please make sure the smart phone Bluetooth is ON. Put the camera shoot ON in the APP, then device enter in remote shoot screen, control remote photograph shooting with following actions: (Right slide screen / lift wrist sense / tap screen) to shoot a picture. 3. Sport Mode 12:45:45 86 3 Record daily activities, you can check daily activities including steps, distance and calorie consumption in the app. Sleep Monitoring: Device can automatically recognize your state and monitoring the whole sleep progress with analyzing the deep sleep and light sleep hours. How to update the device Make sure the device is connected with app, go in the app “Device”-“Device update”, please wait some minutes before update done. Specifications

Sport start Notify mode Stopwatch mode Heart rate mode Notification Alerts: Alarm alert, call alert, sedentary alert, etc. by silent vibration. CPU: Nordic

04 0.49 KM .......156 Anti-Lost: When the smart phone is beyond the Bluetooth range (5m), the device Sensor: Kionix HR Sensor: Silicon labs Si1142

Sport Calories Mode Sport Distance Mode Sport Step Mode vibrates to remind. Remote Camera Control: Host Weight: 18g Battery Type: Polymer Rechargeable Li Battery

MON 23 12:34 3 Operation on the screen can control remote photograph shooting. Heart Rate Monitoring. Battery Capacity: 50mAh Sport Clock Mode Sport stop Notify mode 4. Notification Mode Device monitors your heart rate status and help user make suitable exercise plan. Device Data Storage: The activity data will be cleared every 0:00am as a cycle, but the device itself Data Sync: Bluetooth 4.0 Working Temperature: -10C--45C Dustproof and Waterproof level: IP67

Adish Hi..How 100% Charge full notify could restore 7 days’ data, after 7 days, the data will be cleared. We suggest user to sync data with app at least one time within 7 days during use. Standby: more than 7 days

Incoming call notify Message notify 12:34AM ................ 4% FAQ This product is applied with professional Bluetooth RF signal and self

Alarming notify Sedentary notify Low-power notify Can’t find device when pairing device? Please make sure the smart phone Bluetooth is ON and smart phone OS Android 4.4 & developed algorithm, the accuracy of step pedometer could be up to 95%.

......... ******** 10,000 Anti-lost notify Goal complete notify Notification Mode instruction: Charging notify above and iOS 7.1 & above. Please make sure the device is near the smart phone when pairing (normal 0.5m) and among the normal Bluetooth communication distance range (within 6m). Please make sure the device is not under low battery. If there is still problem after full charge. This product conforms with the EU ROHS standard, refers to the IEC 62321 and the European Union ROHS code 2011/65/EU

1.Under incoming call, message notify mode, the screen will still display the last time text and sliding, when there is a new notification coming in. 2. If there is a call or message come, the device will force into call/ message alert mode no matter under whatever other mode, after quit, it returns to previous mode. Can’t connect the device with app? Some smart phone Bluetooth service will be abnormal when reboot. Please reboot the Bluetooth or reboot smart phone for pairing device. and its revised codes. MARKETED BY : AJA RETAIL andz.com







Leave a Reply