Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: Settings & Preferences Press and hold the MRK and SEN buttons to access Preferences. To exit Preferences, simply wait a AutoPower Off Power turns on or off depending on your vehicle’s ignition type (constant power or switched) Contact Us Notes for Settings & Preferences

few seconds without pressing a button. The unit will display Completed to confi rm your selections.NOTE: 1 Hour Powers off automatically after 1 hour For descriptions of features and functions available when connected to SmartCord Live GPS Powered for Speed and Location Intelligence

Press MRK to go from Press VOLUME + or – to change one category to the next your setting within a category 2 Hours Powers off automatically after 2 hours 4 Hours* Powers off automatically after 4 hours 8 Hour Powers off automatically after 8 hours AutoPower only works with constant power ignition with ESCORT Live visit and download the SmartCord Live user manual for your iOS or Android OS smartphone. Also visit Accessories User Mode Advanced* Access and customize all Settings and Preferences Novice Access and customize units and display color, (all other Settings are set to factory defaults) NOTE: Switch back to advance mode to view all Preferences Pilot Scan Bar* Scanning Bar with Full Word Full Word Full Word: Auto, Auto NoX, or Highway Display Color Blue*/Green/Red/Amber Set color to match your vehicle’s dash display Speed Display On* Displays current speed Off Displays battery voltage Cruise Alert Off / 20-90 mph Off ers double beep alert tones below specifi ed speed 20 mph* Over Speed Off / 20-90 mph Reminds you when you exceed a specifi ed speed 70 mph* Meter Mode Standard* Single band with bar graph of signal strength Spec Single band with numeric frequency Expert Multiple bands with bar graph of signal strengths Simple Simple messages replace bands: Caution (if traveling below cruise alert limit) Slow Down (if traveling above cruise alert limit) Tones Standard* Standard ESCORT alert tones Mild Mild doorbell chime alert tones AutoMute On* / Off Automatically reduces audio during alert AutoLearn On* / Off Automatically stores and locks out false alarms Units English*/Metric Units for distance and speed Voice On* / Off Voice announcements GPS Filter On* / Off Enables GPS-powered features NOTE: If auto power is on, the display screen goes blank after 30 minutes to save screen life. Display screen will turn on automatically after you reach 10 MPH Band Enables Default* Default Settings for North America Modifi ed Customize the bands you want to monitor Press SEN to go from one Press VOLUME + or – to change band category to the next your setting within a category X Band On* / Off K Band On* / Off Ka Band On* / Off Ka-POP On / Off * Laser On* / Off TSR On* / Off Automatically rejects traffi c fl ow sensors-monitoring false alarms Marker Enable On* / Off Other, Red Light Camera, Red and Speed Camera, and Speed Trap Modifi ed Customize the types of locations you want to mark for future reference Press SEN to go from one Press VOLUME + or – to change marker category to the next your setting within a category Other On* /Off Other location Redlight On* / Off Red light camera Red & Speed On* / Off Red light & speed camera Speed Cam On* / Off Speed camera Speed Trp On* / Off Speed trap Clear Locations Marked Clear all user Marked locations. Press SEN button to confi rm Lockouts Clear all lockouts. Press SEN button to confi rm Defender Clear all DEFENDER data. Press SEN button to confi rm Format Clear DEFENDER database, all markers, and all lockouts. for the PASSPORT Max Owner’s Manual. To view serial number and software revision press MRK and MUTE while powering on detector. To restore PASSPORT Max to its original factory Settings, press and hold SEN and BRT while turning the power on. A “Restored” message will display, acknowledging the reset. Software Updates PASSPORT’s red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools. In order to have access to these updates, you must register your PASSPORT at Once registered, you will receive email notifi cations that updates are now available for your database or fi rmware. To handle your software and DEFENDER updates you need to connect your Max to a computer fi rst. You can connect Max to a computer via USB/USB Mini B cable. 800.433.3487 Designed in the USA ESCORT Inc. 5440 West Chester Road West Chester OH 45069 Sales/Service 800.433.3487 ©2013 ESCORT Inc. Escort®, Passport® Max, Escort Live!™, Defender®, AFR®, TrueLock™, SmartShield®, SpecDisplay™, AutoSensitivity™, ExpertMeter™ and Cincinnati Microwave are trademarks of ESCORT Inc. Manufactured in Canada. Features, specifi cations and prices subject to change without notice. FCC NOTE: Modifi cations not expressly approved by the manufacturer could void the user’s FCC granted authority to operate the equipment. FCC ID: QKLM5MAX This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Open ➜ High Definition Radar Performance Compatible with Pre-loaded DEFENDER Database

Press SEN button to confi rm *Default Setting 6 7 8 R A D A R • L A S E R • S A F E T Y C A M E R A • D E T E C T O R Quick Reference

39552_ESC_Max QRGnew.indd 1-4 10/15/13 10:47 AM Congratulations PASSPORT Max Features Installation Controls & Features

You’ve just purchased the fi rst and only radar/ laser detector to offer high-defi nition (HD) performance and accuracy—the all new • PASSPORT Max’s HD Performance accurately identifi es real threats sooner than any other detector, providing more advanced warning when you need it. • PASSPORT Max’s GPS location-based intelligence automatically locks out false alerts and allows you to mark locations for future reference. • PASSPORT Max gives Mounting Tips: • Center of windshield between driver and passenger. • Ensure clear view of road ahead and sky above. • Avoid windshield wipers and heavily tinted areas. To mount PASSPORT Max in your vehicle: 1 Remove backing from StickyCup mount. 5 To remove detector, press mount release button on PASSPORT Max and slide device off mount. 6 To remove mount from windshield, release locking clamp and pull tab on top of StickyCup. StickyCup Care Instructions: To clean your StickyCup, simply rinse under warm water, gently wipe off any debris and Using PASSPORT Max 1 Plug small end of SmartCord into modular jack on PASSPORT Max and large end of SmartCord into your car’s lighter/accessory socket. 2 PASSPORT Max should power on automatically. If not, press the device’s power button. 3 Upon initial power-up, PASSPORT Max will Using SmartCord • Mute Button: Press to mute an alert; press three times to lock out a false alert; press twice while receiving a locked-out alert to unlock. • Alert Light: Blinks orange when receiving an alert. • Power Light: Lights blue when receiving power. Power Press to turn Max on or off Mount Release Press to remove device from mounting bracket Mute Press to mute an alert; press three times to lock out a false alert; press twice while receiving a locked-out alert to unlock BRT Press to adjust display

PASSPORT Max. Go to for full featured Owner’s Manual. PASSPORT Max you access to ESCORT’s ® DEFENDER Database, which warns you of verifi ed speed traps, speed cameras, and red light cameras. • Plus, it’s compatible with ESCORT Live, our allow to air dry. 2 Firmly press StickyCup onto windshield and fl ip locking clamp to secure. 3 Slide PASSPORT Max mounting slot onto mounting bracket and push back gently to ask you to confi rm some basic Settings and Preferences. Press MRK button to scroll through and OK these Settings (or press VOLUME + and – to edit). NOTE: You can easily access and customize all brightness (Min, Med, Max, Auto, Dark) SEN Press to adjust detector sensitivity (Highway,

features a new multi-color OLED display. Brilliant graphics illuminate intuitive icons that identify the type of threat at a glance. exclusive real-time ticket-protection network, which warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for over-speed alerts.* lock into place. 4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure. of your Settings and Preferences by pressing and holding the MRK and SEN buttons. See Settings & Preferences for details. Earphone Jack Modular Connector Plugs into detector jack Lighter Adapter Connects to lighter/accessory socket MRK To mark a location for future alerts, press MRK twice, then VOL + or – to select the type of marker, then MRK again to confi rm. Press Display Showing current speed Display Auto, Auto NoX) Volume Press and hold + or − to adjust volume

*Requires Optional SmartCord Live and app subscription. Compatible with StickyCup Locking Clamp Thumb Wheel For Angle Adjustment Connects to optional 3.5 mm stereo earphone. Modular Jack Connects to SmartCord for powering your device Mini USB Jack Connects to your computer via USB A/mini B cable for downloading software updates twice while receiving marker alert to unmark OverSpeed alert setting that can be adjusted in Preferences. Speed limit data will show here when connected to ESCORT Live

H I G H D E F I N I T I O N R A D A R P E R F O R M A N C E Continued ➜ Mounting Bracket 2 3 4 5 39552_ESC_Max QRGnew.indd 5-8 10/15/13 10:47 AM







Leave a Reply